arial font is not compatible regular

Similar Questions

• Not displaying not Arial fonts

  Howdy

  Mac, Dreamweaver CS6 Mac OSX 8.2 (Mountain Lion)

  Picture says it all, choose Arial all the text disappears...

  Other Adobe products see the Arial font...

  

  Suggestions?

  Thank you

  Garry Stasiuk

  Microsoft?

  This could be it. I found this post from earlier http://forums.adobe.com/message/3063944 , which describes a similar incident, and the patch is pasted below, at least for a person...

  I had a few old versions of the fonts Arial and Times New Roman installed on my computer by Microsoft Office.

  To find them, go to font book and look for the contradictory police. I had two versions installed and Opentype TrueType version, as well as a simplified version of TrueType. I tried to disable the Truetype plain, but the problem persisted. I only managed to fix it by right-clicking on the TrueType plain in the font book and choose "Reveal in Finder", then remove physically police (trash, or move it to the desktop or in another location). Only when I actually removed the old conflicting fonts has the problem disappeared. In my case the old fonts have a creation date of 2001 while they were easy to find and distinguish.

  Hope this can help someone else, too.

  It is in any way worth

• Arial fonts in PDFs former problems!  {Inside photos}

  Hi all.

  This is the problem as much as I can explain it!

  I have pdf files that were created on a Mac origanally (I use Win 7) using the Arial Narrow font family.  I read all of the posted questions

  the policy of Arial Narrow problems, but none solved the problem.  Here are the screenshots of what, in my view, could be the cause.

  When I look at the properties in Acrobat for the PDF in question, here's what fonts appear.

  

  The only font that correctly displays is true font type Arial Black.  Type1 ArialNarrow views

  as shown in the image below. Another thing to note: notice how ArialNarrow is one word?

  Is this perhaps why Illustrator is having a problem with it?  I tried to find it with no luck.

  When opened in Illustrator CS2, it is what is displayed.

  

  The fonts are in my repertoire of fonts in Windows and Illustrator.  I even loaded the old 2.35

  a version which is mentioned on the net.

  The problem is that I have hunderds these documents some with more than 200 pages each.  I messed up

  with this for several days now and I am at a loss of what to do next.

  Any help would be greatly appreciated!

  Mark

  Substitution of fonts in Illustrator by using Type > find font is not going to work.

  If you look at the screenshots, you will see that the fonts are CID fonts with custom coding. The fonts on the computer of brands have probably ANSI encoding (for example standard Western character set) and character cards will not match. So you will not get text legible but just squares or other things (diamonds, points etc.)

  Mark sent me a file to look at and here's what I wrote in direct e-mail to him.

  The problem is that the PDF was made directly from InDesign, which converts the fonts fonts CID (normally used for Asian fonts such as Chinese, Japanese and Korean) and, in so doing, he created a table of characters (encoding) that is not compatible with our ordinary fonts that use the character of Western (ANSI) encoding. Which explains why the replacement police incorporated by one on your system does not work.

  There is some info on the Adobe website at the following links:
  http://kb2.Adobe.com/CPS/329/329611.html
  http://InDesignSecrets.com/CID-identity-h-fonts-are-back.php
  http://forums.Adobe.com/thread/324995

  Also, the problem of the CID character exists in Acrobat 7 and 8, but got solved in Acrobat 9.

  The only thing that has worked to get a PDF with readable and editable text was to use an OCR program (Abby FineReader in my case, but Omnipage can do the same thing) to process the PDF and embedded fonts are basically OCR'ed use system fonts and then resave PDFs had basically the same effect that replace the embedded fonts to system fonts. After that opening the PDF file in Illustrator has normal text and the file can be changed. Although Serif DrawPlus does a better job by opening the PDF file in editable format.

  In this case, the road of the OCR is an option because the PDF contained a table. If this had been a drawing that the OCR option can be less useful depending on how the OCR software manage the drawing part, unless you get the text on the PDF and reinsert it into the drawing would be sufficient.

  The above information may be of some use to those who are faced with the same problem.

• You have an antivirus software available to take the place of AVG search Simple that has been disabled due is not not compatible with Firefox? I need to have an anti-virus. Is AVG search simple take in all anti-virus software be used?

  He also mentioned that Java will be shut down because it was not compatible either. What should I do? Back to what I had before the update?

  Firefox has a built-in component of safe browsing checks against a list regularly updated (on your computer) of know malicious software sites:

  • http://www.Mozilla.com/en-us/Firefox/phishing-protection/
  • Enjoy Firefox warning screens:
    • http://www.Mozilla.com/Firefox/its-a-trap.html
    • http://www.Mozilla.com/Firefox/its-an-attack.html

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Photosmart 309g: 178XL for Photosmart 309 g not compatible

  I'm in England and my HP printer is a Photosmart C309g taking cartridges HP 364.

  While vacationing recently in Japan, I bought a (black) cartridge 178XL as she listed on the packaging, in English, that it was compatible with the C309g printer. This is the same as the regular replacement cartridge 364, and actually it's purpose and the same except that it is marked 178XL purposes.

  The problem now, as I've discovered here and first hand on these forums, is when it is installed in the printer, it returns a message indicating it is not compatible.

  Good maybe the cartridge can't read English, but who make a difference when it comes to ink, but it of something to do with this chip and can it be disabled or will HP be magnanimous and send me a compatible replacement?

  Hello

  You must call HP Japan and ask them to give you instructions to reset your printer. It's trade secrete hope someone from HP on this forum can help you by sending uou h. More information:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• Arial Bold do not work on Windows 7!...

  With a new installation of Windows 7 and PhotoShop CS4, I open a PSD file that was done on my old XP, all the fonts which where ARIAL BOLD is now a few other fonts when I opened the file. Its look really very close, and this is not ARIAL!...
  What I tried to restore the Arial font on my computer:

  • Copy and install Arial *. files from another computer Win7: Don t work
  • Copy and install Arial *. files from another Windows XP computer: Don t work
  • Download Arial from internet and install: Don t work
  • sfc/scannow: Don t work

  Other tests I have tried:

  • Save the text to a different style of Arial: works
  • Save the text in a different font, but also FAT: works
  • Open the file in XP with Arial BOLD: works

  So, the only one who do not work is ARIAL with the "BOLD" style.

  Solution?

  Hi omdawe,

  Welcome to the Microsoft Answers site!

  The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the best support you request.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  However, I found a similar article which seems to have a fix for the problem. Access the link below and read through the fix.

  http://support.Microsoft.com/kb/956514

  Hope this information was useful.
  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• How to reset my default to Arial fonts permanently?

  I have vision problems and Arial font works best for me. How to reset the default Arial fron?

  If you have idea us in as to what application you want to change the font, we would be happy to help you.  My crystal ball could not tell me today.  :-)

• 11.1 Adobe Font Folio is compatible with windows 10

  does anyone know if adobe are folio 11 is compatible with windows 10. the data sheet does not specifically indicate windows 10

  Yes. Do Folio doesn't have any installer.

  About Font Folio OpenType fonts are easily compatible with Windows 10 - right-click on any one of them only and select 'Install' from the context menu that appears.

  It is not mentioned in the technical data sheet because it was written before the release of Windows 10 and the product has not been updated in the interim.

• Suddenly, some fonts are not available.

  InDesign CC 2014 crashed today. When I restarted it I found that some of my fonts are not available. I'm on a Mac Pro running Yosemite (10.10)

  For example, two weights of Proxima Nova are available (light and regular), but the other characters are not. Those other various fonts are available in other applications (that is, Illustrator).

  Here are the different screenshots

  1. screenshot of InDesign

  

  2. the screenshot of the book of fonts to display the fonts are active

  

  3. screenshot of Illustrator CC 2014 showing that these fonts are available here.

  

  See the fonts troubleshooting | Mac OS X and clear implements cache fonts.

• Could not complete your request because the file is not compatible with this version of Photoshop.

  Hi - I tried for a few days in order to reopen all file ive created with photoshop cs5 but ketting the same message "Could not complete your request because the file is not compatible with this version of Photoshop."

  the file is a psd file (just the regular photoshop save as an option) and the file in photoshop consisted of a quicktime movie file - which stood on a layer... (which I could rub through in the animation timeline) and a new layer video in which the individual frames, I drew some images with the brush.

  I can play the video with two video layers in ps cs5, but when I record and try to open I get the message "Could not complete your request because the file is not compatible with this version of Photoshop."

  I have no antivirus or norton... programs etc on my computer

  and ive tried to do this on a mac and a pc and get the same result.

  its crazy because im saving the file with the same im version tries to open it with.

  any help meet me would save a looming deadline.

  Thank you

  I noticed that the psd file is only about 10 MB, but the movie quitime file (as a stand-alone file - (before that I made in photoshop is 650 MB)) - is this a problem?

  Have you installed all the updates to Photoshop CS5? (the current version is 12.0.3)

• error - VboxDrv.kext not getting is not compatible

  I installed MacOs Sierra. At the end of installation, I got an error "this system extension"VboxDrv.kext "is is not compatible with this version of Mac OS X and cannot be used.

  I own macbook 13 inch, middle of model year 2010.

  No idea how to solve this problem. Could this problem be impacting my work somehow.

  You must update to VirtualBox (or uninstall).  Go to http://www.virtualbox.org to get the latest version or the instructions to uninstall...

  Best regards, Patrick

• Extra folder columns 1.1.5 is not compatible and I need

  I'm really annoyed because my thunderbird has been automatically updated to 38.1.0 and since then I can't use the extra folder columns 1.1.5 Add-on very useful for me, because it is not compatible with thunderbird 38.1.0. I'm really angry. Update to thunderbird, it is supposed to improve to do not deteriorate like that.

  If you would have bothered to read the release notes, you would have noticed that the add-on is not longer necessary.
  https://www.Mozilla.org/en-us/Thunderbird/38.0.1/releasenotes/
  The features are now built.

• Why most modules are not compatible with thunderbird vs 38.1.0?

  In recent weeks, I use Thunderbird 38.1.0.

  But when I have a few Add-ons, the site informs me that all add-ons are not compatible with my version of Thunderbird 38.1.0.

  I am using windows 7 Pro 64.

  Please can someone help me with this problem?

  Kind regards

  HenkB

  You must request the addition on the author. Thunderbird has no control over software 3rd party development.

• What does this mean and how to fix: the router address you entered is not compatible with your WAN IP address.

  I connect to an access provider via Airport Extreme, which is extended through two Airport Express.  When I try to edit anything in one of these devices, even a name, I get this message: "you have entered the address of the router is not compatible with your WAN IP address.  My connection seems to work, but there is clearly something wrong with her.  The Express has no DNS and will not update without the same message.  I have no idea what this is all about and will greatly appreciate the ideas.

  This means that WAN Setup does not or does not install across the network.

  The best way to solve this problem is beginning on...

  Reset all three at the factory and reconfigure each in turn. Do the extreme first and make sure it works... Then add the express.

  If you need help with that we will need to know which modem or modem router to your ISP gave you and possibly the type of services to wide band... and who is the provider.

  Give us screenshots of each installer as you do.