Art randomly pixelated

Similar Questions

• How to select random pixels in photoshop

  Hello!

  I'm trying to randomly select a percentage of pixels in photoshop.

  I need to be able to enter the percentage value.

  I know nothing about the scripts that I could really use help!

  Thank you!

  Switch to Quick Mask mode. With the mask fast, active in the Panel layer, fill it with 50% gray and filter > noise > add noise, 50 cent and Distribution, the uniform value. Run the Image > adjustments > threshold, defined threshold level to (1 - (desired percentage / 100)) * 255. Leave the Quick Mask mode and your percentage of pixels desired will be chosen at random.

• I get a lot of random pixels, moving, across my screen.

  Any help would be appreciated.  I get tons of pixels all over the screen, like a snow storm.  I don't know what caused it or how to solve this problem, but if someone find this before and knows the solution I would be grateful for the help.  I tried windows update and norton, but that's about the extent of my troubleshooting skills.  Thanks for any help.

  Hello

  Have you tried to install a new set of display of the manufacturer drivers? Download them to view or system board manufacturer (not), then remove the existing configuration/programs and features Control Panel. Reboot, and then install the download.

  The problem has always been there or just start recently? It get worse gradually or suddenly start too bad at the moment?

  Desktop or laptop computer? In the first case, there is a good chance that the display card is bad sitting in its socket on the motherboard, the reinstallation may help. For a laptop, it may be loose or damaged wiring, and this aspect should be addressed by a qualified technician. If less than a year, use your warranty for this. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Illustrator adds random pixels. ??

  Hi all!

  I use CS3.

  Creates a rectangle (x 260px 320px) > object > crop area > make.

  After you export the image to a jpg, the size becomes 320px x 261px. Why Illustrator adds a pixel?

  Thank you!

  Seared,

  I think that the image/culture region can not be aligned with the grid of pixels (vertically).

• SOUL export pixelated out on El Capitan

  Hey guys,.

  all of a sudden since last week my SOUL has started exporting mpegs very random pixelated.

  It comes in all output formats.

  Anyone else facing the same issue.

  Help, please.

  

  See here:

  First graphic question Pro?

• Pixel Bender plugin Native

  Hello!

  I'm pretty used to expressions, scripts and pixel bender, but I don't know about programming (again...).

  I have a bunch of pixel bender plugins that I would be native Plugins. And I don't really know how to start...

  I figured out how to put my settings and controls, compile in .aex.

  But I still don't understand how to get my pixel coordinates, turn them (with a matrix, or simple operations) and then make...

  for example, in pixel bender, I would:

  float2x2 myMatrix = a matrix value.

  Float2 pos = outCoord();

  POS = pos * myMatrix;

  DST = sampleLinear (src, pos);

  do, for example, in the skeleton file?

  I saw the 'put your interesting code here'... but do not know how to write this code!

  If someone can tell me, just on this example, it would be great!

  Thanx

  PS: or y at - there somewhere an example of something similar to the effect of geometry?

  I'm not too familiar with pixel bender, but from what I understand you want to push arbitrary pixel values.

  It can be done with the api c ++, but more easily you could draw values.

  Take a look at the example of "shifter".

  He travels the output samples and pulls the input of other places values.

  If you can to see how to push the values of random pixels, checkout 'CCU' sample project.

  It shows how to access a pixel buffer directly in RAM.

  You may not however, sub-pixel 4 adjacent pixels push values.

  not that this is impossible, I know not at all on who done it.

• First Elements 10 drops pixels when the capture of Sony HDV - A1U on 1394 cable

  Question: When I try to capture from Sony HDV - A1U video pixel Pixelation or drops.

  Video pixels and lines are colored and sometimes not.

  Material:

  Processor i5

  ATI Mobility Radeon HD 5470 graphics card

  Win 7 X 64

  8 GB Ram

  Troubleshooting done so far... In this order... After each test, I tried again. no go.

  -install the latest patches for PE10

  - Update to camera Raw 6.5 to 10 items

  - Update to camera Raw 6.6 to 10 items

  -Install the latest ATI Catalyst drivers for video

  -Codex installed DIVX

  -Updated system bios and chipset drivers

  -With the help of PE8 successfully, I burned the HDV - A1U on a core duo AMD machine but can't seem to make it work on this machine...

  Anyone have any ideas?

  Daren

  Thanks for the pointer to Steve.  I found a similar problem on Dell Support Forums.

  http://en.community.Dell.com/support-forums/laptop/f/3519/p/19348982/19759614.aspx

  The question I have is exactly the same as described in this article.  And it is not that it is a matter of FireWire 1394. Something is causing random pixelation during capture.  Loss varies... sometimes more and sometimes less.

  The research I've done seems to support this conclusion, but judge for yourself.

  Root cause: The original 1394 Ricoh (speed = 400) had a problem with Win 7 because it is more than likely designed for Win XP.

  They continued the expedition Ricoh chipset when Windows 7 is released.  There was data loss, but error kept checking it works well.

  However, the video is where the problem arose.  Another problem common is that the sound will drop out.

  Solution: Buy a card with a TI (Texas devices) chipset.  There are a few 3rd party drivers on the market, but most does not work or works intermittently.

  I bought a PC Express card for the laptop card.  (Part of Belkin FireWire 800 #F5U514) and I had to get a new PIN 9 bilingual cable 4 pin 1394.  It comes with a CD containing the driver 1394 TI.

  Blown inside and everything has worked out very well.   No more video loss and it works perfectly.

  Side note: the reason for which the core duo has worked is I upgraded the USB/Firewire combo card last year that (I think it is inner PCI combo from Frys that uses the driver VIA 1394 OHCI compliant) after a little research I found there is also a TI Chipset.

  OPINIONS: I was tempted to buy the combo USB/FireWire version of this map.  However, after some research, I discovered that it is only a map of 400 speed. It should work, but the faster speed is certainly worth and they are at the same price.  Also while I was in the store, I noticed that half of the stock had been opened and returned.  Now I understand why :-)

  Wanted to just follow and document this here in case anyone else has this problem.  It took me weeks to solve.

  Best regards

  Daren

• Qosmio G20 - won't start, error ATA #1

  I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart

  Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing

  To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not

  Help, please

  Hey,.

  To me, it looks like a serious hardware malfunction

  You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.

  The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.

• 2015 MBP glitchy text / graphics

  Hey people,

  I got a new me refurbed Mac Book Pro Tuesday and my problem is that sometimes, the text, for example in the search bar is glitching.

  There are parts of the letters missing and random pixels appearing - when I select the text the problem usually disappears.

  Web site sometimes show the graphic defects too.

  Now I'm a bit worried that this could be a hardware problem - someone else has experienced this?

  I took a screenshot to show what it looks like, it doesn't always happen but its a little boring and it worried me.

  I think this might be a software problem, given that diagnosis shows no errors, but I want to be sure

  System Specs:

  El Capitan 10.11.2

  MB Pro retina 13 "early 2015

  2.7 GHz i5

  8GB 1867 MHz DDR3

  Iris 6100 1536 MB Intel

  L3

  Memory: 8 GB

  Boot ROM V

  Thank you and happy holidays!

  

  You have 90 days free technical support, 1-year free repair and support 14 days after purchase to return. You can check the problem by (1) start in safe mode. Start with the SHIFT key down. See if the problem is still there. (2) a SMC reset.  https://support.Apple.com/en-us/HT201295 (3) reset the pram. Command, Option, P, R keys and the power button for 3 chimes at startup. (4) to start Recovery (command + R to start) and reinstall. Your data are saved. This does not necessarily remove something. If you still have the problem, make an appointment at the genius bar in an apple store. If when in safe mode, there is no problem, you have an extension or an app that is causing the problem.

• Win 7, games and graphics glitches/display driver stops resonding

  It is essentially, while the game (WoW or Borderlands in my case) there will be a variety of glitches that occur. I know not just the terms for each of them, but it's going is going to be whatever it is grids of colored seemingly random pixels (pink and green often enough) polygons is extended into madness and whatnot, often accompanied by the "display driver xxx has stopped working...» "(yes I see it a lot and still do not remember the exact wording: /). Pixel an individual will persist even after everything is closed and I'm back on the desktop. In addition, these do not occur immediately and I have no real way to predict when it will happen across that anywhere from 5 minutes to... hours for the first time and the computer seems to be more sensitive then to the point where I'm going to try to play WoW and have the message "display driver has stopped working etc." appears once every 10-15 seconds. Now it's all when I put in very low or setting graphics parameters as low as possible. If I change to something more moderate or what I * think * my computer must be able to manage, I run the risk of having a blue screen.

  OS: Win 7 64 bit (says build 7600)
  Processor: Intel Core 2 Duo E8500 3.16 GHz 2.83 Ghz (copied from my system page)
  Graphics card: Nvidia GeForce 9800 GT

  The drivers are all to date and stuff overheating is certainly not a problem (map revolves around 52C - 56 c, lower when there is no game product). I thought it was a heat issue at the time where I got it and my dressing at the time (who curiously seems to have worked until recently) has been to increase the speed of the fan and run graphics with minimal adjustments. I checked my memory sticks, and those who seem to be good as well... both of things I tried to figure out/deal with that there is probably another thing I checked and I do not forget to mention. Any idea or ideas would be wonderful.

  Try reducing harware acceleration.

  1. open the screen resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  2. click on advanced settings, click the Troubleshooting tab, and then click on change settings.
  Note that some video card drivers do not allow allows you to change the settings.
  3. move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  Kind regards.

• E260 Firmware update problems

  I have a Sansa E260 with a possible screen failure. But before I'm six deep, I want to try and reinstall the firmware. Two questions. The first is what version should I? I thought that it was a version of R, but gives the version.txt and version.sdk both show

  01.02.24A, so I guess it isn't a version a: second issue is how to get the unit in mode msc, without any orientation of the screen. I'm guessing that I'm not in msc mode. When I look in the windows directory, there is a subdirectory labeled PPI NAND. If I try to drag the .mi4 file or the ROM file to the root, I get a message that the file is not supported. And then a second pop up message indicates he's trying to copy in the subdirectory rather than the root (the copy does not place).

  Any help would be appreciated.

  Found the solution to force the msc mode. See http://kb.sandisk.com/app/answers/detail/a_id/197. The root files accepted and appeared the updated firmware (ie the files were no longer in the root with an eye after completion.) Unfortunately, the screen still has random pixels so the failure seems to be material.

• How can I remove my brush Buckshot?

  I created a brush "tide", but I can not set the "hardness" and "brush" likes to spray around random pixels and is not 100% about filling in the lettering.  Not what I want.  Below is the result of a simple mouse click on an empty block.

  

  It's weird. And you said that reset you your preferences? for layers, the default value is pass through. Brushes, will remain on the last mode of mixture used. There is no way to get rid of the blend in the list mode.

• Judgment of the force 'For' loop of weft update

  Hi all

  I put a loop 'For' event-driven 'enter Frame', but it causes flash did not become real-time. Is it possible to stop the loop when the stage make a new mount?

  the code below as an example:

  addEventListener(Event.ENTER_FRAME, update)
  
  function update(e:Event) {
       for(var i:int = 0; i<300000; i++) {
            // My actions here
            
            // Stop command here when frame updated
       }
  }
  

  I use Adobe Flash Pro CS6 with ActionScript 3. Thanks for your help...

  Thank you

  What you want is impossible. ActionScript is not multithreaded, so there's no way in the middle of executing code to 'know' when it's time to make the next image.  The event handler code is still running until the end. It is up to the programmer to ensure that event handlers do not work for too long.

  The only solution to your problem is to do less of each image. For example, determine the number of pixels can be treated before the downturn occurs (keeping in mind that this limit will be different for different users), then limit your loop of treatment that a great number of pixels at a time, perhaps iterative processing the entire bitmap or select random pixels instead. If you wanted to get really fancy, you can include a benchmarking algorithm to determine automatically which is the upper limit on such or such system before the processing time exceeds the pace.

  Also, your randomHex() function can be completely replaced by Math.random () * 16777215. That should speed things up a bit. Save a local reference to bmp.bitmapData.width and the height to the function of update instead of looking it up every time the loop should also be faster.

• Why the path I create in Illustrator CC never rest in place?

  Is there a current bug in the tool path in Illustrator CC? I tried grid align, Snap Gird, Guides, snap to Guides, enabled all the Options to turn power on and off. No matter what I try to solve the problem, the way I create will not remain in the position that I place when adding properties. Adding an accident stroke to the path causes the path to awkwardly move in a random direction, mainly down. I won't 6400% zoom with the direct Selection tool and manually move the anchor points back on the guides/grids that I put up and as soon as I let go, the anchor returns to the position of the random pixel. IE - set the anchor of 400px and happen randomly to the 400.5px later. Nothing stays the place. It seems that any adjustment to the path will cause the path move randomly. It's extremely frustrating trying to keep things clean and precise. I spend more time trying to solve the buggy movements than to actually create my work.

  Is there a setting preferably I'm missing that causes this or is this a real bug?

  410er0r,

  Just to be sure: is to line up on the grid of pixels completely off?

  Otherwise, you can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• added horizontal lines every time I edit or create a layer

  with the new update of Photoshop, whenever I have turn a layer or change a text layer or create a layer there are 2 lines of random pixels added to my files ruin the layer!

  What is going on??

  It may be your display GPU drivers support trying to extinguish GPU in performance of Photoshop preferences section.