Installs Java, but is not detected

Similar Questions

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Pavilion dm4 2191 - us: Virtualization intel enabled in the BIOS but still not detected by HAXM insataller

  Recently, I was working on android, for AVD requiere (VT - x) is activated. After some research on the forums, I have it enabled in the BIOS (photos attached) but still have the error. I checked the hardware-assisted virtualization detection tool. I also updated the BIOS but still had the same problem. Kindly help me.

  

  Hello:

  See if the solution of Paul works for you:
  http://h30434.www3.HP.com/T5/notebook-hardware/hardware-virtualization-enabled-in-BIOS-but-not-detected-by/m-p/4889931

  Concerning

  Visruth

• Possible viruses have on Vista computer but does not detect anything with current Antivirus software

  When I opened my online banking Web page, I have a popup asking for personal information. Something like that on the note: "we are currently doing a security check, for your safety, please fill out the form below and we thank you for choosing Scotiabank.»

  and then a bunch of fields corresponding to what I have my Bank would normally know... ran several antivirus programs and does not detect anything...

  A ran a few different antivirus but nothing found...
  * original title - online services - Trojan?   Only using Firefox *.

  Hello

  Use this too

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• AppSpeed sees the database, but does not detect application

  Hello

  We test AppSpeed with an application (Web and database).

  We have no problem with the database server, but the web server is still "not mapped" and the application is not detected.

  We are generating traffic, but nothing for several days.

  No idea why?

  Hello

  If the web application is being not mapped, this means that AppSpeed discovered.

  The traffic that you generated is probably not sufficient. I generate heavier traffic and wait a little longer application be detected.

  Thank you

  Zviad Polak

  AppSpeed Support

• After installation, my computer does not detect my Laserjet 1536dbf network and I can't print

  I installed my printer on my home network. Now, my computer can not detect so I can't print.

  I noticed that the printer indicates a different IP address that the router assigns to him and which is visible on the router configuration Web page. Reset of the printer and my router has no effect.

  I had to reset my router a few days due to a failure in broadband. Could be the cause of the problem?

  It turns out that reset the router after the failure in broadband, the other day off the ethernet port to which the printer is conncected. It's strange because the previous resets did not do that.

  Thanks for your help.

• I can't run flash... 11.1.102.63 it said installs correctly, but does not work... help!

  I uninstalled and reinstalled as an administrator. using windows 7 ultimate 64.
  After that it says successful installation, it cannot find any version of flash on the adobe support page!

  Ah, I think it's your problem. You have 64-bit Windows, but you run 32-bit Firefox. If you install the 64-bit plugin, it will work only in 64-bit Firefox, not 32-bit. Have you installed the 32-bit flash I linked above? x 64 Firefox isn't officially supported by Mozilla again (there's a party there, but it is still in development), we recommend that you continue to use 32 bit Firefox and plugins until it is officially released.

  So, if you download the link I gave, as long as you have x 86 Firefox (not one every night, you don't), it should work. The all x 64 and x 86 can be confusing with the plugins.

• iMac 27 "2010 super reader accepts the Snow leopard installation disc, but does not seem to sit in the car to allow their reading

  iMac 27 "2010 snow leopard install disc came with my iMac and are version 10.6.3

  installation disk after installation of the new hard drive I need to load but SuperDrive does not appear to load correctly the cd in the drive. I can eject with eject button, but as operating system has not loaded, I get accepting player and playback of discs.

  Super car has always been a guy to load discs so am aware of that happening.

  Tips anyone?

  Thanks in advance

  Sarah X

  I think you can find what you need in l http://www.dummies.com/how-to/content/how-to-boot-snow-leopard-from-a-dvdrom.htm

  If who disobeys, then your drive may have problems.

  Further, create a clone bootable on an external HD. You will need either SuperDuper or Carbon Copy Cloner to make. Then, when you install a new HD, just boot from the clone and the format, the HD and restore the complete system of the clone.

• Extension installs ok but does not appear in Photoshop

  Hello

  I created an extension for Photoshop CC and built a self-signed zxp package. The package installs with Adobe Extension manager.

  Even if the AEM related the extension as being active, he does not appear in Photoshop.

  It is possible that there is a problem with the build (maybe not all of the required files are included). Is it possible to debug a signed package?

  Concerning

  Simon

  After that I updated Photoshop to the latest version, that it no longer appears in the extensions Manager. After a few Google searches, I discovered that the extensions manager has been abandoned. So I downloaded the extension to the cloud to Adobe.

  From there it wouldn't install at first, but after uninstalling extension manager and uninstall and reinstall Photoshop and a reboot, the plugin appeared.

• Flash Player installs fine, but does not work in firefox

  Adobe flash player doesn't seem to work on my firefox. I try to watch anything that uses the flash and he suggests that install it. I have re-installed flash and shockwave flash as well as firefox about 5 times now. nothing works. It seems to work on Google chrome, but I want to continue to use firefox.

  Searching the Internet has failed me, and I can't find all the topics with solutions.

  I hope someone here can help or at least point me in the right direction.

  I had the same problem you had for a long time until I found this forum Vincent. Little by little, I've collected some clues and I hope not too late to share my research with you. Heres how I fixed thanks to Carl E. Myers, who gave me the answers to identify the problem.

  The way in which I discovered that the problem is when I saw the control/flashplayer Panel noted Carl E, the Flash ActiveX and plugin are not installed as 32 bits in which I will explain later. From what you post, it's very likely your problem as well.

  so here's how to solve this problem:

  http://www.Adobe.com/support/flashplayer/downloads.html

  1. on this page, you will see

  Download Windows Flash Player (for IE) 11.2 ActiveX control content debugger (EXE, 3.93 MB)

  Download and installation

  2. the same page, you will see

  Download the Windows Flash Player 11.2 Plugin (for Netscape compatible browsers) content debugger

  That should do it. Why?

  Flash from Adobe installed as a 64-bit installation!

  Your computer is a 64-bit, like mine, so that's why ie and firefox are not picking up our installation of Adobe Flash, because Adobe Flash automatically installs on windows system you are running. It's a big problem we users of 64-bit because some applications are NOT 64 bit but more so compatible (if necessary). For example, Mozilla Waterfox is a 64-bit application that is built to our windows and you would see that the flash would work without problem because flash has been installed as a 64-bit. In addition, IE64bit, another proof that should be able to achieve as well, but not to be confused with IE as it is a 32-bit application.

  Plugins and activex controls you have installed are manual installation 32 bit and that you now understand why it will now work for firefox, ie and other browsers 32 bits that needed it. Apples to apples now.

  PS even if which should fix, I highly recommend using Waterfox instead of Firefox because it is surprisingly fast and way better live for your windows.

• Installation successful, but is not

  I use IE 6 32-bit browser and installed Adobe Flashplay. It worked very well. Today, I tried to upgrade to IE 8 beta. After some time of installation, I received a message that IE 8 does not work on my system. After that, I couldn't play flashplayer. He asks for the installation, I did install said succesfull. I restarted but it still says I need to install. Drive.
  
  I use XP Pro 64-bit system, but I have 32 and 64-bit IE 6. Only the 32-bit browser can use reader, this is the browser I use.

  The fixed. I ran Adobe uninstaller and then their debugger, uninstall, rebooted and reloaded the player.

• LaserJet P1102W: INSTALLATION p1102w WIRELESS: does not detect my USB connected during installation

  I am in this picture and I can't do the installation to continue, even if I'm sure that there is nothing wrong with my USB port.

  I tried to use the same cable / usb port to print from the printer and it works.   but that's just for this installation wireless, doenst work.

  Help.

  

  Hello

  This can happen due to connection of USB oprior the installation of the software.

  In the devices Panel and printers, right-click on any instance of your printer and select remove device.

  Allow it a moment, if nothing happening try removing and reconnecting the USB after the specified screen.

  If you have already stopped the installation, don't forget to remove any existing printer device and unplug the USB, then follow the installation once more and connect it only when necessary.

  If it persists, click the background area of devices and printers and select Device Manager, is there any icon marked in different categories?

• MY computer does not recognize my CD or DVD drive. Install regognices Assistant readers and installs drivers but does not install readers it self. This problem appeared after I had my computor worked for virous".

  No error messages, unidentified DVD, slide open but data sets are not enabled.

  Hello Ted1931,

  Thank you for your message.  Please, click HERE and run the Microsoft FixIt! tool.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Have HP laptop running XP Home Edition. CD/DVD drive opens but is not detected. Could not locate the drive using option desktop and unable to read or write to drive.

  I had this happen once in the past.  Taken to a local repair center.  Found something in a recent windows update caused problem.  Deleted some item at the register.

  Hi vernanne,

  You can run the fix it from the link below and check off the results: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  You can also check: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photoshop cc installs correctly, but will not update

  OK downloaded the trial version of cc

  I install it, I install photoshop and I install illustrator, everything is ok except repeat me photoshop update, but when I click update it tells me

  Download error. Please click try again, or contact customer support (49)

  I tried to uninstall, using the cleaner tool and reinstall but still the same problem

  You need to 'dig deeper' specific programs

  Cloud programs are version 7 internally... example... First Pro for Windows... the most recent shows is the version 7.2.2

  Adobe - Premiere Pro: For Windows