Artists don't include after I have change the name

Similar Questions

• Some components missing CUCM sauvegardΘ after you have changed the IP address of a Subscriber

  a strange problem with cucm backup... After we migrated the cucm one taken sub. from one place to another and changed the ip address, some components were not in the backup, including TFTP

  Backup successfully(100%) finishing, but when we check some five components were not in the backup.

  When I searched in Cisco site, I received the following:

  "Sometimes, after an upgrade, some services are not registered to DRS.

  Workaround

  --------------------------------------------------------------------------------

  Step 1 during the maintenance window, log on to the server in the CLI editor and run the utils disaster_recovery show_registration servername command.

  This command lists all the components registered with DRS for the backup on the server for the specified Subscriber.

  Step 2 disable and re-enable any component that is not registered to this server backup.

  Step 3 run the utils disaster_recovery show_registration servername command again to check the component is registered for backup. "

  Can someone help me with the command to disable and enable a backup component?

  Thanks in advance,

  Fox.

  You have to basically disable & re-enable the service associated with this component not registered. for example if TFTP is a constituent unregistered, then disable & re-enable the service TFTP Cisco of the activation of the service. Then CLI, issue command 'utils disaster_recovery show_registration' & you should see the TFTP component registered with DRS.

  Similar procedure must be done for the other missing items.

  GP.

  Pls rate helpful messages by clicking on the stars below the post!

• Since Windows 8 my taskbar don't auto hide more, even after you have changed the settings.

  Just upgraded to Windows 8 and my bar tasks don't hide now, even after clicking on auto-hide settings, I tried applying ok then ' ing, and I tried to get rid of any notification, but usually disappear again :/

  Any help would be thank you very much.

  One of the common culprits that breaks auto-hide is the center of the Action.

  To test: click the Action Center icon in the system tray (it's the icon of white flag), when the window pops up to close it. If the taskbar mask that was the likely culprit.
  You can turn off the center of the Action via the control panel > Notification area icons > the system tray icons turn on or off > Action Center in the OFF position.

• WMP changes its name at the time where I change the names in the playlists

  Hi people, to support

  I have XP and WMP 11. I love working with WMP very much but I have a big problem with the creation of playlists.

  First, he must know that. If I make a playlist of different artists like this and sync it to my MP3 player, the player will put all the artists and the album separately names in its lists of an artist folder and album that creates a huge long folder to browse to the 'normal' CD That's why I change at least the various names of artists in 1980, for example has a slow. A brilliant solution, was it not for the fact that WMP is very difficult to accept these changes in the mine. He continues to change the names of 'my' name of origin found in their records. After changing several times later he accepts it, most of the time. But... the problem is worse when I want a particular song appear in more than one playlist, as Slow 1980 and slower. He even sometimes change the names I put in the original name in the original records. I hope you understand what I'm trying to explain, and it drives me nuts keep changing the names. (You probably also I know I have change the names in WMP or in the files folder.)

  How can I solve this? Thanks a lot for help.

  Hello

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  Step 1:

  Exit Windows Media Player.

  For Windows XP:

  (a) click Start,

  (b) click Run,

  (c) type %userprofile%\Local Settings\Application Data\Microsoft\Media Player,

  (d) and then click OK.

  Note You don't have to remove the folders that are in this folder.

  (e) restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Step 2:

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  (a) output Windows Media Player.

  (b) If you are running Windows XP, click Start, click run, type %userprofile%\Local Settings\Application Data\Microsoftand then click OK.

  Note Windows Media Player automatically rebuilds the database.

  See also:

  Create and use your own customized reading lists

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/playlists

  Add or edit media information

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/album-info

• How to change the name of the catalog

  I used a 'Test' Catalog.lrdat to try to correct an error in the collection.

  Fortunately, it succeeded.

  I would like to change the name of the catalog, including backups, but the recent problems make me uncomfortable. Is it as simple as "rename all including the original copies and backups?

  I'm on iMac and 10.10.5 using LR 2015.3.

  Vince

  Using the Finder, replace it. LRCAT file for your desired name.

  Then rename the 'Preview' folder using the same naming convention of names (your catalog name + "previews.lrdata").

  There is no need to rename the backup as long as you remember that you have changed the name of the file if you still need to do a restore.

  After you rename the catalog, you will need to manually point LR to the catalog to use since it will find one with the old name.

• change the name of the computer in homegroup

  Original title: Homegroup computer name Question

  I have a little trouble understand Windows 8 Homegroup computer names.  My name is Lance and I want the name of my computer to be 'Media-3 '.  I tried different combinations of account names and the name of the computer, but whenever I look under the box of homegroup in Windows Explorer, my computer is presented as 'summi_000 '.  It is a variant of the email address, I used initially to set up this new computer Windows 8 until I knew exactly what I was doing (don't know if I know even now).

  I can't quite understand how to get this 'summi_000' to disappear and put the right either user name or computer name.

  Any help would be greatly appreciated.

  Lance

  Hi Lance,.

  Try these steps and let us know the result.

  -Press the Windows key and the X key, then select run.

  -In the line run , type compmgmt.msc , and then press on enter.

  -In the left pane, select local users and groups. Double-click users.

  -Right click on summi_000 and rename it.

  -In the line run , type sysdm.cpl , and then press on enter.

  -In the computer name tab, select change.

  -Enter the name of the computer that you want and press ok.

  Once you have changed the name of the user and the name of the computer account, leave the homegroup.

  Leave a homegroup

  -Open homegroup by hitting swipe in the right screen edge, stitching settings (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking on settings), touching or clicking on PC and then change settings by typing or clicking homegroup.

  -Press or click on leave.

  -Restart the computer.

  Once the computer restarts, try to join the host group and check if the name mentioned under homegroup has changed or not.

  Go through http://windows.microsoft.com/en-in/windows-8/homegroup-from-start-to-finish

  Let us know if it helps or if you need additional assistance.

• Change the name of the profile

  Hello.

  When I first installed the Adobe creative cloud acount, a friend of mine, Joana, used his name for instalation by mistake. She told me I have changed the name later. Yes, I did.

  My name is Eduardo Soares and it changed into the account, but on the application (DC Adobe), he always calls me by name my friends.

  Why is it it has not updated the name of the application and in the account online, changed?

  This isn't a big deal, but its kind of boring

  Sincerely

  Eduardo Soares

  Hi Eduardo,

  I don't see any subscription purchased on the Adobe ID you used on the Forums.

  If you have installed office application Cloud creatives while it refer to: connect and disconnect activate Cloud Creative applications

  If not, then follow the steps below:

  • Open Acrobat DC and then go to the Help menu, you will see a logout option there click
  • Now sign out and then sign in again with the Adobe id and password. ( email address with which the subscription was recorded )

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• Open my empty project and everythings? I changed the name of the class... But everythings gone? Here is a link to my project.

  I broke my project! I made a Christmas tree of lil with labled gifts under it for my friends to click on and it will take them a link where they can get a gift card code I got for them.

  Anwyas... I swear.. everything was fine... All I remember last changed the name of class composition and evolution untittled bit in the upper part of the same. Also, I accidentally open in an older version of the edge because I have 2 copies on my machine, but I it all the time and has never beaten a project before... so I donno...

  I compressed my files. I'm a little desperate to fix this problem... Its Christmas! IV been working on this for always... To do today... It was perfect... I want to just my files? Is it all the same?

  Here's my project if someone wants to take a look... Everything I've done is just gone, white... D: http://portalpacific.net/AussieChristmasParty.rar
  
  Any help REALLY appreciated!

  Happy holidays!

  I'm afraid, that it cannot be solved. The files are totally corrupted - have what it has a NULL NULL...

  You said that you have changed the name of the class for the composition. How did you do that? do you have files published by chance? published before this happened?

• How can I block change the names of the song in iTunes?

  Hello

  I want to change hundreds of names of the song at the same time.  I know that I can change the name of the album etc in INFORMATION, but I don't see an option to change the name of the song. I want to change the names of track 1, track 2, track 3, etc, so I would like to be able to enter the name of the TRACK and then, it automatically adds sequential numbers (identical to finder).

  Any ideas?

  Go to dougscripts.com and find an apple script to do.

• Generated by changing the names of files Wizard

  I used the wizard of Coldfusion/Flex applications to create master pages and detail for a very simple application.
  
  The name of the table that I used was "user_tbl" and the template created .as file is named Useruser_tbl.as. The app works just fine as it is, however, I did not like the name generated for the .as file.
  
  I have changed the name of the User.as file and all the references appropriately changed the master views and detail (Users.mxml and User.mxml)
  
  Now, when the application is compiled, I get an error:
  1067: constraint implied a value of type com.myapp.views.detail: use a com.myapp.models: User type unrelated. MyApp/src/com/myapp/views/detail User.mxml /myapp/src/com/myapp/views/detail/User.mxml
  
  Changinging the name of the file and references back solves the problem.
  
  What else do I need to change to get the file name change to work?
  
  Any help would be appreciated.
  
  pWp
  
  
  
  
  

  Obviously my import declaration is ignored. I used the full package name 'com.myapp.models.User' in the detail .mxml file and the problem stopped.

• No there is no way to override the lock 8 hours AFTER you have changed all your questions?

  No there is no way to override the lock 8 hours AFTER you have changed all your questions?

  < object edited by host >

  use the contact for Apple at the bottom of this page and ask them if it is a question about the security of your account.

• Animate cc, the police is both by default when you change the size of the text field. Have integrated a font with the name prjFnt... but once I have change the rating in the design view of the prjFnt goes to the new roman times... what a mistake... don't

  Animate cc, the police is both by default when you change the size of the text field. Have integrated a font with the name prjFnt... but once I have change the rating in the design view of the prjFnt goes to the new roman times... what a mistake... don't have we not no matter what patch

  This problem has been fixed in the latest update to animate CC.

  You can upgrade to animate CC 15.1.0.1.13 creative use of cloud App or via the Help menu > updates.

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• HP 4500 Envy: How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?

  I don't want to receive the email confirmation of the printer - how do I disable it?

  Hello

  Please sign in to your account connected HP

  b click my account

  b click on Notifications.

  (c) uncheck the e-mail notifications

  d save change

  Kind regards.

• I can't change the name of the artist in windows media player 12

  I just got a new computer with windows 7 and windows media player 12. I can't change the name of the artist... the only thing I can change is the name of the song. I have a bunch of songs apparently by an artist called "Various Artists" (even if the playlist on the right has the artist right next to the name of the song)

  After almost losing my mind I finally realized that if I went to 'Artist' under the music heading and 'edition' "various artists" by clicking right select edit and then it is empty. But that only put some of the songs in the right places. I have now 2 songs always under "Various Artists" and apparently no way to solve this problem. It's so frusterating. Is not able to organize and change the information the whole point of WMP? Why am I required to have two completely different artists and songs under the title "various artists" I'm afraid to download more music because if another song goes under "various artists" I could just smash my brand new computer.

  What version of WMP, I had on my old computer had an advanced tag editor... Why is it that has been subscribed? And then I'm on the subject it's terrible this new Windows Media player is why is there not more "recently added" tab? It would have been helpful in trying to find music mistagged I just add... or maybe I should remember that all the songs are technically 'Various Artists' and just look there first.

  You can also change the Album artist for the music , if you select the column of the Album artist , right click on a column heading and selecting ... Choose the columns . Tim Baets
  http://www.BM-productions.TK