HP LaserJet Pro M125nw MFP: HP LaserJet Pro MFP M125nw - problem with drivers

Similar Questions

• OfficeJet pro 8620: officejet pro 8620, error: problem with ink system

  During the initialization of the printer, after that I inserted the ink cartridges, I get the error: "X-problem with ink system... I followed the directions: "lift the latch on the print carriage, reinstall the print head and then remove the cartridges and inspect leaks." Do not use cartridges that leaks. If the cartridges are OK, re - install. After you have reinstalled, turn the printer off and then back on. »

  Well it don't turn off the printer... I get another message: "the printer initialization and the ongoing calibration.» Do not put off the printer or turn off the power during this process. »

  I repeated this process on 6 or 7 times with the same result.

  I use "cartridges Setup" he claims.

  Help, please!

  Thanks in advance...!

  Johnny

  Hi @JohnnyLee,

  Welcome to the HP Forums!

  I understand that you found the error, the problem with ink on your HP Officejet pro 8620 system. I'm sorry to hear that, but happy to help!

  I recommend going through this guide, printers HP - "Problem with print head", "Printer failure", "Ink system failure", or "0 x." r "C2."... "Displays Message error.

  If the guide does not help, please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• HP LaserJet MFP M125nw problem with print printers key Pro

  Hello

  I would like to print page printers code to the center of HPePrint to add the printer to the service. When I switch on this service - I get the information that the test with the configuration page will be printed - and HP is not print anything.

  Other reports are printed correctly, it's just after click, we haven't worked.

  Thank you

  Hi @Martin1982,

  Thank you for taking the time to answer my questions, I appreciate it.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps are in the document of the printer is not maintaining the wireless connection .  It is three Solution.  For the DNS primary server please use 209.244.0.3 and auxiliary DNS server, use 209.244.0.4.  These are public DNS servers of Level3.

  Please let me know the results.

• Color Laserjet PRO MFPF 377dw: problem with Color Laserjet PRO MFPF 377dw and HP network scanner

  After removing the package of printer drivers HP, all attempts of resettlement via WLAN regularly fail before the end, which indicates that the device is not found. I physically connect the printer to the computer by USB cable to install the software successfully. When I go to WLAN Wireless thereafter, the printer works perfectly within the network. If I remove the USB cable, the following error message appears when I try to start scanning HP: HP CLJM377 Scan found . In other words, HP Scan cannot be used with a PC not connected by USB cable. All other remote features function normally printer in wireless, including HP Scan & Capture. Is there a possibility to correct this, via the Windows registry from my PC?

  MrRobot wrote:
  

  Hello! @Chirsistei, your description of the HP product is classified as a commercial product (business). Our sales support team provides support via the channel of entry here. If you need immediate assistance, you will need to open a session one business with our sales support team. Click on this link http://ow.ly/I3gw30140F8 for more details.
  Let me know if you want more information and/or assistance.

  Have a great day!

  See you soon!

  Hello Chetan,

  I think I'm in the wrong forum here because I live in Switzerland and here the Laserjet Pro M377dw color is sold to private users. I have no access to a support plan and use the printer in my home office network. Your proposed solution therefore does not help me, during this time, I have posted this problem in the forum on language German you need not to pursue this new. Thanks anyway

• HP Officejet Pro 8600 more: problem with HP Officejet Pro 8600 more light

  As soon as I turn on my printer after some time one get a short flash printerscreen code: B84D7A4. Subsequently, I get the massage that I have to powerdown the printen and turning the power on again. This repeat hisself without end. If I disconnect the network cable from the printer starts normal. As soon as I connect the network cable, I get the same error code.

  If I connect to another network port, I have the same problem.

  Who knows the solution for this.

  I can still print via USB cable in. But I don't get the option to the printerscreen: SW update.

  Greetings @HPofficejetPro,

  I saw your post about the problems you are having and I can find some things that you can try.

  Have you tried another ethernet cable?

  The same thing happens when you connect with a USB cable?

  HP regularly publishes updates of firmware that can also correct the problem you are experiencing. With the USB cable is connected, you can click on this link to download the firmware update for the. HP Officejet Pro 8600 more e-All-in-One Printer - N911g.

  Is the printer connected directly to a wall outlet or a surge protector or a power bar? We want to connect it to a wall outlet so that we can eliminate the source of energy as the primary cause. See this document for more information on the problems when connected to an uninterruptible power supply/Strip/surge protector power (Note: this document is not limited to printers Laserjet.)

  Please let me know the results, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• Satellio Pro A60: serious problems with ipod photo

  I bought an ipod photo (60 GB) and could not use it on my laptop Satellio Pro A60. I have spent hours on the phone with tech support at Apple guys and went to their Apple in London Centre, twice, the last time with my laptop - they still could not make it work.

  They blame it on the BIOS and hardware not being is not fast enough to write to their hard drive Toshiba. I tried USB 2.0, firewire, etc., but nothing works. Apple support suggested that I get the latest update of the Toshiba BIOS, but the BIOS for this model was last updated was released on 2 September 2003.

  Can anyone help to get my ipod to work? PLEASE?

  Katia

  [Edited by: admin on 3 July 05 13:22]

  Hello

  I n t have experience with iPod but I can recommend you to check the BIOS settings. There must be an option called configuration of the device. Please configure the OS game. I found a support interesting page where is mentioned that iTunes 4.7 or later version is required to use the picture of the iPod.

  Check it on http://www.apple.com/support/ipod/tutorial/ip_gettingstarted_t9.html
  http://www.Apple.com/support/iPod/tutorial/ip_gettingstarted_t11.html

  Good luck!

• Satellite Pro L850 1DR - problems with Windows 7 update KB2887069

  I have problems to install the KB2887069 update.

  It seems to install OK... prompt me to restart... when I do it, says it configures... GETS to 7%, then starts rebooting... watch it configures again... up to 7 or 9%... and then reports it is defect and restoring... restarts again... and it is quite... not installed and reference to Windows Update confirms it failed.

  All the other updates I had installed today very well once I realised KB2887069 was the problem and failed to update.

  I am running Win 7 Prof Serv Pack 1 64 - bit on a Toshiba Satellite Pro L850 1DR. I use my AV Microsoft Security Essentials software.

  For now I had to hide the update... but all of the bright ideas how overcome the problem. I tried the Microsoft site, but there is still no answers who brought a solution for me.

  Thanks in anticipation!

  I googled around for KB2887069 update and it seems that you are not alone with this problem to Microsoft Update. I also found your request in the forum, Ms.

  In other words, that's not a problem of mobile by this must be resolved by Microsoft.

  I read in the MS forum on this issue and this issue is still under investigation.

• Satellite Pro C660-1J3 - problem with OpenGL / Edrawing

  Hello

  I hope you can help me with the following problem:

  I need to work a program that we OpenGL for drawing, but still the program does not work if it opens the drawings, the following information, always on the screen:

  "OpenGLView: EnableRenderContext failed" and the stop-work program.

  So I dry to update the driver grafik, but it does not work. I found a thread on this forum, but http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67241 his looks.

  I am at the part:

  Thank you, useful, but still having problems. I downloaded "Intel® Chipset Device Software (INF Update Utility) v 9.3.0.1019" and installed it the way you say, but the computer says I'm already under the latest version of the driver, which the computer is 8.15.10.2622. I'm running Windows 7 x 64 Home Premium. I can't forget the old version and use the new version.

  I don't really know the command SETUP-OVERALL, where I can find this command...

  Please help me, I need the program to work!

  Computer laptop-type: Satellite Pro C660 - 1J3 PSC0RE and I we Windows 7 Professional 64 bit

  Thank you alex
  PS Sorry for my English ;)

  Post edited by: alexk

  Hello

  I think the drawing application needs the graphics driver that supports OpenGL.
  To my knowledge, the driver of the Intel page should already contain the OpenGL.
  The Satellite supports graphics Intel HD (Intel HM55) so I think that you should use the driver from the Intel page, even if the update utility indicates that you are using the latest driver.

  I think that you need to uninstall the old driver through the Device Manager.
  In addition, check whether it should be uninstalled in the control panel-> software.

  Then download the latest driver for the Intel HM55 chipset, and install it via the Device Manager.
  You do this by using the Advanced installation procedure that will force windows to select the driver from the driver's record, that you have downloaded from the Intel page.

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• Intel Pro 2200BG has problems with stay connected

  I recently bought our laptop, and we have an Intel Pro Wireless installed BG2200.

  When I connect to broadband with the network cable I have no problem, but as soon as I swop on the wireless, I have big problems. The wireless to connect and disconnect a few seconds and repeats itself until I have disable the wireless settings. I tried to reload the software, without success, unless I'm loading the wrong software. I tried to load the IP, while it is fixed, which did not help.

  Someone at - it suggestions for helping me get my wireless problems solved.

  Thank you

  Hello

  Who is your internet service provider? If it is BT, or even if this is not the case, you could try this:

  http://support.Microsoft.com/kb/933872/en-us

  See you soon

• HP Officejet Pro 8500 has problem with black ink printing

  I have an Officejet Pro 8500 a printer. When I print documents, it will not print anything in black ink. The colors work very well, but just black will not print. The printer says that the black ink cartridge has plenty of ink, and when I shake it, I can say that there is something in there. So, I don't think it's a question of black ink out. Is there a chance that something is blocking the ink out? Any patches for this in addition to the purchase of a new ink cartridge?

  Document here can help solve the black is not printing on your HP Officejet Pro 8500 has.

• OfficeJet Pro 8500 a - problem with the wireless radio

  First of all, I'm sorry for my bad English. I hope that you have little imagination when reading. I'll start to describe the problem and the lower list, I hope, all the relevant information you need to help me.

  Yesterday, I bought a brand new OfficeJet Pro 8500 has.

  Since I have found a little bit of my computer and my router I configure for wireless connection.

  All whent fine, the printer connected to my WIFI network without any problem and I was able to do a scan using the HP scanning software. How ever, when you try to scan a document nother directly after the first that did not work. I got an error message on the computer telling me that the computer could not connect to the scanner and it could be caused by the firewall. I also tried to print a word document, but it seemed that the document could not be sent to the printer during the observation of the State of the printer. Finally I gave up the print job and began to study the problem.

  By using the service to help in the HP software that I did all the things he suggested me to do. I have disabled the firewall, open TCP/UDP ports, restarted the router, the computer and the printer in different combinations, nothing worked.

  All the while the printer was connected to my WLAN, indicated by the State of the network printer and the router. I was about to give up but thought I should try only to disable and enable the transceiver wireless in the printer. To my surprise this solves the problem. I was in a position of scan and print documents.

  Today, after work, I tried to do another analysis, and the same mistake was present. Once more I did magic with the wireless radio and it has temporarily solved the problem, but he came back a few minutes later.

  Summoriz, the error can always be corrected by disable and enable the radio wireless, but after some time (a few minutes) the error returns that it self.

  I played a bit and discovered that it is possible to access the built-in Web server during the error. Not all functionality of the EWS seems to work perhaps (it's OK) but I can't among many things has see the State of the network and I can even do an analysis using the integrated Web server.

  I tried to reconfigure the printer using the printer setup wireless and also after a reset of the printer and it does not help.

  I hope someone on this forum knows a solution to my problem.

  Useful information:

  Computer OS: Windows 7

  Router: Thomson TG784 (I have an internet connection, phone and TV provider and this box takes care of this)

  Encryption: WPA - PSK

  WLAN: 802. 11 b / g

  No filtering MAC or SSID hidden

  Other devices on the network are two mobile phones and a Motorola Xoom Tablet

  Printers, IP address: 192.168.1.81

  Firewall: WIndows (the router is disabled)

  Concerning

  Thord

  Problem solved. Reinstalled the PC s/w has little time and finally he solved the problem.

• First pro CC (2014) problems with the audio on the .mts files

  Hello

  He is a recent problem I had when trying to play some clips in first Pro CC (2014), I import the entire private folder and some game clips as normal and others seem to have ignored audio. This causes the second half of the video for do not have audio in there at all because it's boots upwards initially. I don't know even where to start by trying to solve the problem, the only thing I've done is re import the files and put them into new folders to change the destination, it was imported from.

  Any advice would be extremely useful as it is above all preventing me from getting any work.

  Thank you!

  Hi amber1992,

  I will suggest you to go ahead and clean the media cache and cache media files folders manually.

  MAC OS: Click the go menu > go to files > ~/Library type, and then click ok. This open the user's library folder and then access the Application Support > Adobe > commune > media Cache and the Cache of media files. Delete all the files in these folders.

  Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can click on the Start button and search for type %appdata%\microsoft\windows\sendto and the Roaming folder > Adobe > commune > media Cache and the Cache of media files.

  Once done the project again and check.

  Kind regards

  Vinay

• Satellite Pro L500-12F - problem with CD/DVD player and screen

  Hello...

  I have a few questions on my laptop...

  1. is it normal that the DVD rom on some DVD/CD it is very noisy and vibrates a lot, spesialy on older CD

  2. the lid of my laptop when I close its kinda not in harmony with the rest of the pc it is not fully aligned, but it's a little difficult to see wait when you look for it... but its good on and what is not lost or anything just not setting for the "body" of the laptop

  3. the cover still once, under the screen where the cover is mounted on the 'body' off the laptop so... It is not glued to the screen as the rest of the rolled edges it is right next to him that you can drag into it, so you can see the wires enter the screen etc.
  is this normal?

  -Thank you

  Hey Pedersen37,

  (1) maybe your old CD's doesn't work correctly. What happens if you try the same disks in another computer?

  Regarding your display/cover problem if you mean that you can see the cables that they go into the screen I can see it on my laptop. Normally, all the cables are invisible and under the plastic.
  He s strange to say something on the subject but maybe a lid plastic isn't installed correctly or a screw is missing

  If you think that something isn't normal, you should contact your authorized service provider. They can check the laptop.