WiFi, connection to an I Phone

Similar Questions

• LaserJet Pro P1100w: Then my LaserJet Pro P1100 AirPrint phone without wifi connection?

  My LaserJet Pro P1100 AirPrint phone without wifi connection does

  Hello

  iPhones and AirPrint works only via a wifi connection (no bluetooth or other options will work) without a wireless connection any (direct or normal wifi), you will be unable to print wireless.

• I've never seen the cloud on my watch symbolizing the wifi connection.

  I've never seen the cloud on my watch symbolizing the wifi connection. How to operate when phone and shows are on the same network?

  Hi, Kristian

  If your Apple Watch is not connected to your iPhone via Bluetooth, but it is within range of a WiFi (2.4 GHz) network your iPhone plugged in the front (while it was connected to your watch via Bluetooth), then your watch can connect to this network and still offer some features:

  • How to use your Apple Watch without your iPhone in the vicinity - Apple Support

  To check the status of the connection of your watch, go to the eye of parameters:

  • When displaying the time on your watch, slide up on the screen, then swipe left / right for the look of parameters.
  • This will specify connected or disconnected:
    • If it says connected and the icon in the upper right corner is a green phone, your watch is connected to your iPhone via Bluetooth.
    • If it says connected, the icon is a green cloud, then your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • If it is disconnected, your watch is disconnected from your iPhone and also is not connected to a Wi - Fi network. The icon in the upper right corner will be a red telephone with a line through it.
  • Slide down again to return to the watch face.

  To test whether your watch is currently able to connect to a Wi - Fi compatible network known as a relief:

  • When within range of the network, turn off Bluetooth on your iPhone.
  • After pausing for a short time, check the status of the connection of your watch as described above.

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

• WiFi connectivity is lost after 12 hours on 32RL938

  Hi all
  I have a very strange and annoying questions on my 32RL938 aruond wifi connection.

  I set up the TV and connect to my wifi at home and everything is very well four approximately 12 to 15 hours.

  After leaving the TV in standby for a while (let s for example during the night) when I start it up again, I realize that, although my TV says it s connected to my local WIFI s there is no access to the drive Toshiba Places or DLNA network.

  The network connection test fails also.

  If I check on the router to the TV has a valid IP address and look connected, but no matter what ping test it s ip fails.

  The only solution I was able to identify this problem is to restart the router.

  After the reboot, the TV connects fine to my network and I can access the Internet on this subject.

  What is very strange, it's my house, I have 6 other wi - fi devices (laptop, phone android, printer, Tablet, etc.) that work perfectly well as my TV shows that there is no link.

  Because the ruter is not in my room it is quite difficult to restart every day.

  Please let me know if you experience this kind of behavior and what could I do about it. I also tried with static and dynamic ip for television, but the behavior is the same.

  > The only solution that I managed to identify this problem is to restart the router
  > After reboot, the TV connects fine to my network and I can access the Internet on this subject.

  For me, it looks like a problem of router and not as a problem of TV connection.

  But you can also check if the latest firmware is installed on your TV

• Skype on iPhone 4S with 3G data uses 3G connection or a cell phone?

  When you use Skype on an iPad, the manual that we saw clearly that Skype is using the Wifi connection. We now have an iPhone 4S with 3G. Is a Skype call to a contact in the computer using 3G data network to connect, or is it using the cell phone?

  It uses the 3G network. Skype's VOiP (voice over internet protocol similar to FaceTime), so it does not use your cellular network. If you have a data plan unlimited, then go nuts. If this isn't the case, monitor your data usage to make sure you don't exceed, which should not be a problem, unless you still do video calls.

• 8 2 HP WiFi connection

  It seems that I'll have to hit the reset button on my router which is a Cisco.   When it struck the two arrows on the WiFi and then the blue button router, it comes right up. Why he couldn't stand the WiFi connection. Any help appreciated. Thank you

  Hey @Phyllisolley,

  Welcome to the forums of HP.

  I understand that you are having problems with connectivity wireless Tablet HP 8 G2.

  Clear all the cache on the Tablet: Settings > storage > cached data. You should have the option to erase all data cached here.
  
  Hard reset: When the Tablet is activated, press and hold the power button for 8 + seconds force to stop. Turn on the Tablet and see if that helps.
  
  Factory reset: Make sure that you back up important files or information, first of all. Settings > backup & reset > reset data.
  
  If this fails to solve the problem, you will find our contact details here. If you are in North America, go to our page contact us. Select your region, then click on contact Support upward. Fill out your information on the product and then fill out the form at the bottom of the page. When submitted it will give you a case number and phone number to call.

  Thank you.

• Problem with WiFi connectivity in windows 8.1

  Hello

  I have problems with my Wifi on my HP Pavilion 15 Notebook (product number: G2H02PA-#ACJ)
  I have Windows 8.1 as well as Ralink RT3290 802.11bgn Wi - Fi adapter.
  
  My Wifi connection says LIMITED connectivity. I've already complained about my problem on the HP support by phone. But I don't have any solution for my problem. Technician a driver wifi re-installed and the Bios but did not get any solution. Customer support sent me some links to update the driver but not got any solution again.
  I tried to install different versions of drivers for card Ralink WLAN ! Still without success!
  I am writing this post from my other laptop that my wifi router running on other devices!
  
  Pending a solution so that I can use internet on my new laptop computer.
  
  Thanks in advance for any solution.

  I also had this problem and corrected.

  To correct the problem of wifi... open charms bar... in the search window, type device manager in Device Manager... double click network adapters, right-click right on... Qualcom Atheros QCA 9565802.11b/g/n wifi adapter... right click and click on uninstall.

  A pop window should open asking you to confirm. Confirm by clicking on... Ok.

  After that, restart your laptop.

  Your wifi should be visible in the networks. You can then connect to your network of your choice.

• laptop connected, but no any phone connected. N150 |

  Hi team,

  Please help me, case I have Netgear N150/JNR1010. We use this wifi in my small office, we have connected the laptop and the cell phone in the wifi router. But these days, we are facing problem only cell phone, in the cellphone all the messenger works well and browser also works fine, but Youtube, game store, Magic Jack etc doesn't work not, error showing try againg. 4-5 cell phone attached this wifi and all the mobile phone have the same problem. But no any problem in the computer laptop, any and all works well. only problem in the mobile phone.

  So please give me the best solution for it.

  Thank you

  Mohammad Arshad

  Administration system

  Hi ElaineM,

  Thank you for your suggesstion, after restarting my Modem and switches its working fine now. All and all this Government work...

  Thank you very much.

• BRAVO: Wifi connects but can't reach Internet

  Just recently my Wifi stopped working properly, anywhere except for home. The phone displays an active Wifi connection, but I can't get anywhere. It still works fine on my Wifi at home. I did not any changes to settings and it is always set to use DHCP to get an IP dynamic task. I tried to have the phone "forget" a network and it relearn, but which did not help. Any suggestions?

  Thank you - dcedte

  Deletion (aka. "forgetting") the unsecured Wifi networks 'remember' solves the problem. When the phone connects again to these networks, it works now.

  dcedte

• Satellite M60 guard give up WiFi connection

  An M60-144, I provided one of my clients has problems with its WiFi connection. It will be ok for 5 to 10 minutes, and then suddenly will drop the connection. Turning off the WiFi and back on again remakes the connection and everything is very well for 5 or 10 minutes.

  The access point is a Draytek Vigor 2600 G and there are other laptop (Portege R100, R200 Portege and Tecra 9000 Tecra A2) that all connect to the same access point to the same place without any problem. The AP employs 128-bit WEP encryption runs in mode 11b and 11g of mixtures. Any other potential sources of interference, for example the DECT phones have been rejected.

  The laptop has all the updates of Windows applied and drivers the most recent site. For me, it screams of a hardware problem with the wireless card, but wanted to know if there are other suggestions first?

  Hello

  I read a few topics on similar problems and in most cases, the update of the WiFi pilot solves the unstable Wi - Fi connection. As far as I know on the Intel Web site you will also find a newer version of the driver. In my opinion, you should check this option.

  http://downloadfinder.Intel.com/scripts-DF-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Best regards

• DX2 - suddenly affected by problems of WIFI connectivity

  Suddenly, I have WIFI connectivity problems on my DX2. The phone previously connected without any problem to my router which is secured by WPA/WPA2 PSK.

  What is happening is this: the phone scans all the available wifi networks, search my router and trying to connect to it for about 10 seconds. then quit and re - start the search. While he tries (unsuccessfully) to connect to my router, it reads 'obtaining IP address. "

  I'm on Android 2.3.3. and really doesn't have this problem right after the Gingerbread update.

  Thoughts are appreciated.

  Problem solved. Turns, the fix was as easy as re-booting of the wireless router, but I didn't go to this subject until my wife started to complain that she can't go on the internet with her laptop.

• Cannot maintain a WiFi connection

  Xoom - ICS

  Wireless - Cisco business WAP4410N access point

  WPA2 security

  After the update to ICS fron Honycomb, the Xoom does not have WiFi connectivity. He was strong on the day. Now I see connected, connected, dropped, linking in continuous models. My phone Droid 4 is strong signal. This Cisco WAP has great ability and is B/G/N. The Xoom is 30 feet of the access point antenna.

  I use given Verizon now where in the past it was all WiFI.

  Any thoughts on why this lack of solid connectivity?

  
  

• My new Apple TV v4 does not smoothly on Airplay with my MacbookPro and Air laptops but with the iPhone and iPad Airlay gets so juddery and then goes off - laptop computer WiFi connections all that happens on clues?

  Devastated to find that the new AppleTV works great on Airplay / mirroring with the iPhone and iPad devices but completely useless on the NEW laptops.

  Trying to show any video for example utube creates immediately hop on the TV screen when you use the Macbook and in no time the WiFi connection is stunned.

  What is going on?

  I use ElCapitan, and the last 15 "16GB i7 Macbook MacbookPro and not expect a problem with streaming media.

  Absolutely well on Airplay with bith an iPhone 6 Plus and also an Air iPad

  This will be due to a network problem. There is a difference between mirroring of a phone/Tablet and grow to a full desktop in real-time

  Mmake that there is no other activity (other streaming, web browsing, backup network etc.)

  Try to connect the Apple TV via ethernet

  To see a current state of the network to obtain a report of istumbler or similar. Look for the strength of the signal, noise, networks nearby

  Test on another network

• WiFi connections

  What causes a wifi connections go to saved when you try to connect. I tried to forget it, and restart options. Some wifi that I can connect to some that I can't. When I stay in now the wifi was the connection for days, now today it will record, once in awhile, it's see the connected but is not really. Had problems since upgrading to 5.1 lollipop. I am close to router and it shows excellent. I can connect with laptop computer and others may also with a smart phone... Thank you

  Using Bluetooth? Please, take a look over wifi Bluetooth blocks on this forum. Some have problems when wifi and Bluetooth are both on, some get around to 5 g only wifi strength (do not know why it has only 3 options: automatic, 5 g, 2.4 g.) There is no option of favorite band. I don't like restaurant offers too many options, everything also I like not software engineer takes away options)

• Keyboard WiFi connect and start over, intermittent stop

  I have a 'Maverick' OS X IMac desktop computer 10.9.5, 2.7 GHz core i5 processor.

  When I want to enter my password to start the computer, my WiFi connected keyboard does not work. I tried everything, change batteries, computer downtime, change keyboard WiFi, etc, sometimes it works again, so it doesn't work anymore, intermittent problem. There is no problem when I connect a USB keyboard. Can anyone help?

  Hello Pierrette45,

  Thank you for using communities Support from Apple!

  Leave your post, it looks like you have a problem with your wireless keyboard does not. I also understand that you have completed a ton of fun troubleshooting. One thing I would look for in this situation is a potential cause of the interference of the signal as described in the following article.

  our mouse or keyboard intermittently not responding

  Follow these steps if your mouse or your keyboard sometimes stops responding temporarily.

  Click or press a key

  • Click on the mouse or trackpad, or press a key on the keyboard to reconnect the device to the computer. It may take a while for the device to respond.

  Search for interference of signals

  • Wireless networks that operate on 2.4 GHz can cause interference. Move base stations of phone wireless, microwave ovens and other appliances of 2.4 GHz far your Mac if you suspect interference.
  • Keep devices wireless to 10 meters (30 feet) of your Mac.
  • Avoid putting metal objects between your wireless device and your Mac.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

  See you soon!