As well as printer 6500 A

printer keeps giving "paper size mismatch" all print in word and printer settings are set to the size of the letter, but error message indicates that the paper is too small. copy & printing?

Is this a problem with the detector size? It can be replaced?

Thank you that I uninstalled & reuinstalled software and drivers - problem solved.

Tags: HP Printers

Similar Questions

  • AcrobatX worked well both printing and scanning when harwired to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat.

    Using Windows7 - I tried Windows10 but restored to 7.

    AcrobatX worked well both printing and scanning when connected to my computer. I went wireless and Windows programs work well both printing and scanning, but not Acrobat. In Acrobat, we don't get the scanner and printer prints in a .prn e-file, not to the printer.

    Help please...

    OK - I'VE CORRECTED THE PRINTER WHICH HAS BEEN INEXPLICBLY THE 'PRINT TO FILE' VALUE, BUT THE SCANNER IS STILL MISSING.

  • Squeak Officejet printer 6500 E710n

    My Officejet 6500 more E710n is about two weeks old.  He has developed a very unpleasant squeal when the print head is in motion.  This happens after printing 3 pages.

    I'm afraid the high unexpected loads will drop the print quality and printer wear at the beginning.  And the high-pitched cry is very annoying.

    Thank you, Bart Dawson

    I had the same problem!  I tried to put a small amount of lubricant on the Guide for the head, but printing pin

    that did not help.  I've finally isolated the squeaking of the little wheel that holds the right hand strand of the

    small toothed belt that moves the print head back.   Be sure not to make the lubricant on anything else

    or you can lead to other problems.  I used a silicone lubricant designed for securities of garage door because it is thicker than

    most lubricants and is easier to do not all fall inside the printer.

  • failure of alignment printer 6500

    OfficeJet 6500 E709a impression of all colors except black. Services carried out, unplugged, restarted, and replaced with new black print cartridge. When you perform the alignment, receive message "alignment unsuccessful. Any ideas would be useful. Thank you

    Hello

    I suspect that this may be linked to the print head.  I have included a link below to help him walk through the steps.  Good luck!

    http://support.HP.com/us-en/document/c01654630

  • All-in-one printer 6500: how to clear the history of calls for a 6500 printer has?

    I am upgrading to a new HP printer and want to donate my 6500 a, but need to erase history calls first.  It has been a tool to clear the fax log, but how do I clear the call history?  I checked after clearing the fax log, and all the phone numbers are always listed in the call history.

    Perhaps a better question is to know if I can reset to default, all settings the settings/history of compensation?

    It turned out that, I contacted HP by phone and received excellent help.

    There is a subset menu which can be found when you press the icon 'back'... on the icon outside the lit display that doesn't show until you type.  They had me find the appropriate page and make a "partial reset".  Brings back the printer to the page where the next time it is turned on, it will ask for questions of initial set-up and all the memory is deleted.  So I have been able to give the machine to the local women's organization helping women with no problems that I can also gave a list of contacts!  Thanks to HP for the excellent customer service!

  • Printer 6500: Mirror Image printing on printer HPOfficejet 6500 a

    I would like to print a label mirror image on iron transfer paper, but I can't determine how to accomplish the task.  How can I print a mirror on my 6500 printer image?

    Hello

    Hope that helps in the following way:

    http://support.HP.com/us-en/document/bpa00531

    Kind regards.

  • Linksys BEFSR41 V3 and HP printer 6500 has

    Hello

    I have a HP 6500 All In One Printer has in the network with a router BERSR41 V3. I use an Imac with this printing and scanning system. For some reason, I keep losing the printer when I try to scan? I put it to a static IP address and cannot ping, but can access the printer through the network with the HP utility. Did I miss something in the router configuration that requires him to keep losing the connection?

    Thanks JR

    ThanksBEFSR41 V3 BEFSR41 V3

    Hello

    Thanks for the reply. I found the solution,

    Set the value to filter multicast as active.

    Thanks JR

  • Black cartridge does not print 6500 wireless all-in-one printer

    He can't get a black cartridge to print even after cleaning the print heads on my of 6500 all-in-one wireless printer.  I tried cleaning the heads of print and sensors twice no longer useful, but can print color.

    jweatherly, unfortunately, it seems that your printhead may be dried or damaged. I would recommend that you replace it if a local retailer or through HP directly.

    However, the print heads can be an expensive part of the printer to replace. On this thread (http://h30434.www3.hp.com/t5/Other-Printing-Questions/HP-6500-Office-jet-E709a-Black-printer-cartridge-HP-920-not/m-p/447545#M28623) Bob describes some steps to clean the printhead in a more direct way. It might be useful to follow the steps, he did and see if it improves your print quality, since he worked for others.

    Let me know if it helps!

  • I have a HP printer 6500 that do not print. It seems that the rollers do not work.

    Roll the rollers, but the book does not advance in the printer.

    Troubleshooting page here can help.  If this does not resolve the problem that, please indicate what model of printer you have, there are a number of models Officejet 6500 with a few differences.

  • Why can I not set my printer 6500 HP for default printer...

    There is no option to make it my default printer, just gives me a convenience store (which says that everything is fine). He keeps telling me that I have hp printers 2 when I've only had this one, it makes the other is my default printer and wont allow me to change it to the printer i actually own. Can I uninstall the one I have not, but it still won't let me not put mine to default then nothing is displayed. then a few days later he put the other printer upwards and fixed to defect even after that I uninstalled it

    Hello

    (1) do you have made no changes before this problem?
    (2) what is the exact error message / complete that you receive all trying to set it as a default printer?
    (3) what is the operating system installed on your computer?
     
    Follow the steps mentioned below and check if the problem persists.
    Step 1: Remove all printers in devices and printers.
    Step 2: uninstall printer drivers for Add / Remove programs.
    Uninstall or change a program
    Step 3:
    Uninstall the printer device of Device Manager.
    Uninstall or reinstall a device

    Step 4: Delete the folder of spool printing from C:\Windows\ System32\Spool\ printers location and then restart the computer.

    Step 5: After deleting the printer, you must reinstall the printer from the link below.

    Download drivers and software - specify product name
    http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3795309

    Hope this information helps.

  • I can't find the code for the printer or the menu of the printer 6500 E-mail address

    I can't follow the instructions to retrieve the code for the printer, I see the symbols but don't see how to print, or to get the Email address of the printer menu

    Maybe the info here will help you

    http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/print-your-Web-services-info-sheet/TD-p/57261

  • New Canon MS216 all-in-one works very well (test prints work.) But it does not print some documents I send to her.

    Support Menu Ex driver is not installed. Do I need? I am running Windows 7 and that you have installed a new MF216 Canon all-in-one. It keeps switching me to fax or scan, when I want to do is print my computer USB connected articles.

    Hi Irma,.

    Thanks for posting your question on the forum of the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What is the number of full model of your printer?

    This problem may occur if the settings or device drivers are corrupt.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the printer Troubleshooter and check.
    Refer to this article:
    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions provided in this Microsoft support article and check.
    Reference:
    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Can't print from internet sites. prints documents very well. Printer is Lexmark S415

    Can print from Quicken, documents of all programs except on the web such as google maps, bank accounts, msn news, etc..

    Hi John,.

    What web browser are you using to print?

    If you use Internet Explorer, then I suggest you to try the steps from the following link:

    I can't print or preview before printing a Web page in Internet Explorer

    http://support.Microsoft.com/kb/973479

    See also the link: https://support.Google.com/maps/answer/144343?hl=en Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  • Help the business cards poster illustrator well but print in staircase

    Hey guys,.

    I made the simple business cards for a customer using their logo (has been provided for me in vector format).

    I then exported to PDF and sent it to printing, only to receive 1000 cards with jagged lines.

    Printing company said that they will replace the 1000 cards once the problem is resolved.

    However, I can't figure out what to do to solve the problem.

    Thanks in advance for any help!

    How the cards are intended to examine:

    Business Cards.png

    How they come out of the printer (reviews of the lines around the tools):

    card front proof.jpg

    Thank you, Andrew,.

    as far as I see it, there is nothing wrong with the PDF, or, when open in Illustrator, with the Illustrator file.

    I did a print test and that is okay.

    So the problem is printing.

    I suspect they use old tax software to combine multiple cards on a sheet and this mess the file.

    Transparency could be their problem.

    If you save the file to PDF / X - 1a: 2003 (save a copy please), then it becomes a pdf mute, usable for the software of the previous century.

  • 6500 has more: printer was working fine and then stoped feeding. Found a small gear broken wheel-shaped plastic

    Printer was working fine and then stoped feeding. I found a small gear broken wheel on the stack of paper.

    Well, your printer is broken. If under warranty call HP.

Maybe you are looking for

  • Ill set my Apple TV.

    Recently I bought a 32 GB Apple TV product. It will not be implemented. I used my iPhone 4 on iOS 9.3.2 and I used my Mini iPad on iOS 9.3.2. It does not connect via bluetooth. I tried installing manually and it is constantly upward with can't set Da

  • OSX Firefox crashes when you try to play youtube on facebook videos.

    When I click on youtube videos embedded on facebook firefox OSX freezes and I need to force quit. Everything is up-to-date, and this problem has been ongoing for at least two updates.

  • connection to the network windows 2000 xp

    First of all, I know I use an old operating system but my accounting program is not beyond XP. My game is windows 2000 with two routers wired / wireless. The system works very well under the win2000 including access a system remote win2000. I am able

  • Dell xps 13 9450 (new version of 2015) produces no HDMI on tv or monitor via special DA200 Hdmi adapter

    Hello So eagerly, I thought about buying this cool laptop you're looking for a huge $2000 I needed to output to an hdmi monitor TV ot if sometimes I could see movies as well, now I have to buy the adapter dell DA200 and in the last 3 weeks, it was a

  • Create the outline of a complex shape

    Here is a picture that I got online... it has a very complex shapePut this image on a layer, how a schema is possible outside curves, so that only the outline, that is, the exact shape of the object, appears as a single line on the layer? The magneti