Linksys BEFSR41 V3 and HP printer 6500 has

Similar Questions

• HP 6500 has more don't scan two-sided

  Via the built-in web server, I see a 710n-z 6500 E printer and not the 6500 has more. Is this the reason why I can't use the duplex document feeder? And how can I fix this?

  Hello

  As far as I can see that your unit has no ability to scan double-sided, as the only option in the menu are

  Original copy / 1 side 1-sided
  Copy original/2 faces 1-sided

• OfficeJet 6500 has more I printed some photos and now won't print regular documents.

  Software problem with paper size selection.

  I've used the Officejet 6500 has more several years with no problems. Recently, I have printed photos and changed the size of the paper, it printed fine. Now it will not print any document or e-mail message said selected paper size is incorrect. I looked for different paper formats and changed the letter. Same problem will not print documednts. It will correctly display the photos. I have deleated and reloaded all HP software already.

  Is it now a Windows 8 malfunction?

  Help.

  Thanks for the offer. I continued to work on the set-up and you have the printer to work.

  Thank you.

• my hp 6500 has more all in an office jet is not printing with magenta and yellow why colors?

  my hp 6500 has more all in an office jet is not printing with magenta & yellow why colors?

  Well! Wish we knew what caused the problem, but I am very happy, it is corrected! Please post if there are other problems!

• Publisher cannot connect printer wireless Officejet 6500 has E710e and the laptop over the network

  I just changed my ISP and moved to British Telecom, who sent me a new router. The new service is in place and working well and I reconnected my Officejet 6500 a E710e CN557A to the wireless network. But I can't connect the printer to my laptop no matter what I try. I have uninstalled and reinstalled the printer on the laptop using the original CD and then updated to the latest drivers. I even reset the printer to default and then network related setting before attempting to connect the portable computer whose IP address of the printer without success. My laptop OS is Windows 7 32 bit and the printer is just over a year. He worked like a dream with the old wireless network.

  I have already downloaded on my laptop HP - HP Print and Scan Doctor diagnostic tools and troubleshooting network printer connection. Printing and scanning doctor can't see the printer and I followed the instructions of troubleshooting without success.

  Any help and advice would be much appreciated.

  If it is a BT Home Hub, they don't play well with HP wireless printers.

  You can try this - remove all instances of your printer in Control Panel > devices & Printers. Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• My new HP 6500 has more printer will install properly and paperjam, on the contrary.

  This printer is new and I tried new drivers, no Jam (when he's going to say that instead of print).  I almost fixed everything on my pc before, but it made me very frustrated.   I reconnected the printer several times, but also I do not believe that the printer receives adequate controls of the PC which leads me to believe that other readers download I downloaded and the printer cd does not work for some reason any.  I'm trying to figure our why it seems that the printer will not receive any orders, before it says "paperjam" reason appaqrent.

  Hello

  Follow the form of measures troubleshooting article and check if that helps.

  'Paper jam' message displays on the all-in-one

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02441153&cc=us&DLC=en&lang=en&LC=en&product=4083977&task=solveCategory

  Also, try to contact HP support and verify.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• My HP Officejet 6500 has only prints via ePrint?

  I installed my HP Officejet 6500 a Plus 2 months and it worked fine then.  The installation is with a Linksys E1000 wireless; I have updated the drivers and was able to Airprint to my phone as well.  I just came back to be out of town for 2 weeks and now I get the following error message when you try to print: "Unable to communicate with printer", the printer is unavailable or offline.  Similarly, when I search with my iPhone, I don't find any available printer.  I restarted the printer with no improvement.  The thing is, it seems normal and has internet access, with full wifi signal.  Not only that, but I sent a print job to the printer by emailing the ePrint site and which printed fine.   Any reason why the printer would always have wifi access and can print using ePrint, but not be available locally? (when they are all on the same wifi network)?

  OK, let's put the whole system:

  1. close all (printer, computer, iPhone, everything).  Disconnect the power from the modem and router.

  2. start the modem by plugging the power cord.  Let it boot completely.

  3. start the router by plugging in the cord.  Let it boot completely.

  4. start everything else and let it connect to your network.

  Now, try to print.

• OfficeJet 6500 has more will not print black - Solution

  My 6500 has more do not print black even with new cartridges.  There is instruction to Reset to solve this problem for the 6500, but reset instructions do not work on the 6500 has more.

  How to reset the 6500 has more

  Thank you

  I paid $20 to HP for this information.   They said that the secret to getting the Menu support isn't on the web for the 6500 has more printer.

  My printer has stopped printing black, even with a new black ink cartridge.  I've had the printer for the last 4 days guaranteed when this happened.  Was on my second or 3rd Xlarge black cartridge.

  Steps to fix it.

  1. remove the cartridges

  2. remove the cartridge door / carrier, lift the big lever to release him.

  3. clean the contacts of the cartridge with water and cloth.

  4. clean the contacts and all other surfaces on the Cartrdge support with water. mine has all backen up with ink - it filled the sink with black water.

  5 clean the contacts copper this interface for the cartridge door of the printer. . These were covered with of ink too.

  We then conducted cartridge alignment and it 'Fail' printer still does not work.

• Why my hp officejet 6500 has more printer take ten minutes to four pages of fax?

  HP Officejet 6500 a Pus E710n-z series

  Windows 7

  Why my hp officejet 6500 has more printer take ten minutes to four pages of fax? No change has been made and no error message. This seems to be an extremely long time for only four pages!

  Firmware has been day t0 then did a hard reset and tested a fax. seems to be faster, but was not a very detailed page. will be able to say when I have more pages to send. If this is no better at this moment, will post back.

• OfficeJet 6500 a: Office jet 6500 has printed a computer; produce reports of the printer

  My trusty old Officejet 6500 has suddenly cannot print from my computer.  When I try to print, I receive a FAX form on my screen.

  I printed the printer Hardware Information (2 pages) and the status of the report of the HP printer Assistant printer and they look great.

  How to print the Test Page from Windows printer and the Configuration Page of HP network?  I printed these years when I installed the printer, but I do not remember how I accessed them.

  Thank you for your help.

  It seems that the FAX is set as the default for your printer.  Try the following: click on start, devices and printers. Right-click on the Officejet 6500, and then select set as default.  At this point, it can come with a selection to the FAX or printer, select the printer.

• How to print from my ipad to the officejet 6500 has more?

  I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

  OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

  BTW - what is the problem with your PC that it cannot access the internet?

• OfficeJet 6500 has more - black print cartridge will not print - other colors will be printed

  OfficeJet 6500 has more the black cartridge will not print.  I put in a new cartridge, so it is there

  ink.  The printer works, because the other colors of printing.  It worked very well and when

  printing, black has slowed and now does not work.

  I called technical support.  Megan has been very helpful to me through the steps to

  clean the print head.  Unfortunately, the black cartridge still does not print.  I have

  has ordered a new printer, the 6700.  I appreciate the help of Megan and will be happy to

  have a new printer.

• OfficeJet 6500 has more printing problems

  My Officejet 6500 has more (model CN557A) is connected through the USB port.  My operating system is XP.    I can scan my computer, I can copy and print from the printer control panel, but I can't send anything to print from my computer.  This problem just started about 3 days ago.  I tried troubleshooting but I have not received the case.  I did not add new programs, and I have 194 GB free on my hard drive.

  Can anyone help?

  N ° however, I accidentally discovered the problem.  I had a card reader connected to my computer to download pictures.  Apparently it disrupted the cycle of printing for my printer.  I removed the card reader and the printer works fine now.  Thank you for your response.

• HP Officejet 6500 has stopped printing, paper white just came out.

  My Officejet 6500 has just stopped printing.  I use a USB connection and my operating system is Windows XP Home Edition.  At first, it was just the text that Wouln't print but the colors would come by, even on test prints.  On a print document the little box comes up showing the data transferred to printer, printer starts but doesn't work with a blank page.  I have uninstalled/reinstalled program, has gone through the full program of the HP Solutions guided, checked all connections, installed the new driver, and yet do not print anything.  Have never had any previous problems since I bought.  I have not recently installed new programs.  Would appreciate any other suggestions.

  After everything I lived, I finally solved the problem.  Although the ink levels showed ink cartridges, I put a new black in one and it works!

• Re: HP 6500 has more print head always needs replaced

  I own a HP 6500 e709n and have had problems with the cartridges of printers are not recognized and experiences one now where worked my 920 dual black cartridge and the printer being functional black print only with no error messages but not color print as one or more of the cartridges were probably low or dried up. I changed the cartridges out with genuine hp 920 s and now get a message indicating one or more cartridges missing or damaged-cyan. Put my old cartiges backwards and got the same failure where none were before with them. From cartridge games and open holes with PIN as described for if ensure that ventilation was allowed both sets and retried. Was always the same message on cyan then pulled the print head and cleaned by the procedure several times hp. Now get the ink system failure. Cleaned again now return to the failure of the cyan cartridge. Loop d zero. Seems that this printer know when I really need and fails at that time in a way that I can't fix.

  I worked in the manufacturing sector and in my case all returns have been watched and analized by Tech as a measure of the quality control or quality assurance. It makes sense for business profitability so much customer satisfaction. In my view, because there is a common problem that seems to be frequent, there is an exact question that was observed by the company (HP) and they know what the problem is. IM surprised that information has not been put forward here by people who represent so called HP. What is the main problem that change a print head - relieves most of the time? Dried up ink in the corridors. Hard Electronics failure of the members of the Ribbon or pc? Faulty detection mechanism? Mechanism of cartridge HP cartridge original problem to prove ID? Customers using non hp cartridge or refill the cartridge authentic? ... what causes?

  Thanks for the reply. As I said in my post 2cnd problem was completely healed of many print CRC head baths and a toothbrush. Is there a reason why it has been edited my first post on the thread? Apparently you still like you he referenced earlier. Thanks, Keith