ASA 5510: beat s2s VPN

Hi all

I have a VPN of n-star with 5510 boxes in several places.

Users complaining that s2s links are beat from time to time for both places.

Here's the log output for the moments where the links are torn down:

First spoke:

07/07/2010-20:17:09 Local4.Notice % 713259-5-ASA: group = , IP = , Session is to be demolished. Reason: The user has requested
07/07/2010-20:17:09 Local4.Notice % 5-ASA-713050: group = , IP = , missed connection for peer Reason: terminate Peer  Remote proxy 10.3.0.0 Proxy Local 172.16.100.0

Second spoke:

07/07/2010-18:34:45 Local4.Notice % 713259-5-ASA: group = , IP = , Session is to be demolished. Reason: Idle Timeout

07/07/2010-18:34:45 Local4.Notice % 5-ASA-713050: group = , IP = , missed connection for peer Reason: IPSec SA time-out  Remote proxy 10.5.0.0, Proxy Local 172.16.100.0

I think the bold text is the reason. But I don't know why a connection stop remote site1 and why to site2 is timeouts.

I have HIS lifitime for 24h\4Gb to each ASA and the volume of traffic or time never pass in this case, KeepAlive is enabled to the ASA hub as well. I see a number or a "spacing" all day with the same reasons for termination that I presented above. Anyone has a suggestion or idea why s2s VPN are hinged and how make them more stable even if the traffic is not flowing throughout.

Thanks in advance.

Sergey,

No matter how lucky you have vpn time-out configured on one of the sides (it may be in default group policy perhaps?)  (see the race from all political group | I vpn)

"IPSec SA time-out"

HTH,

Marcin

Tags: Cisco Security

Similar Questions

  • Cisco ASA 5510 - restrictions of VPN (AnyConnect) based on the AD user or IP address

    Hello

    I want to test how to restrict access user on an ASA 5510 AnyConnect. In politics, I can define what networks will go through the VPN tunnel and which not (split tunneling). The ASA has a LDAP connection and only AD users with a special security group can connect over AnyConnect.
    On the other hand I would like to restrict access for special users within a VPN policy.

    So my question:
    What are your recommendations to implement this szenario?

    My two ideas would be:
    1. the access rules based on the user of the AD.
    2. special reserve IP addresses in the pool of addresses AnyConnect for some users, so I can limit access to the normal firewall rules base based on the source IP address.

    What are your recommendations and is it possible to realize my ideas (and how)?

    Thanks in advance

    Best regards

    Hello

    I will suggest that you configure a second ad group in the server and another group strategy in the ASA, you can configure certain access on each group policy "the installer of the filters, assign different split political tunnel, different ACL' and in the ad server, you can assign users for example to the AD Group A and AD Group B based on the access you want to give them now , you must configure LDAP mapping to assign the user specific group policy that you want based on the AD group that they belong.

    You can follow this documentation that will help you configure the LDAP Mapping:

    http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

    Best regards, please rate.

  • Between asa 5510 and router VPN

    Hello

    I configured ASA 5510 to vpn LAN to LAN with router 17 857. and between the routers.

    between vpn routers works very well.

    from the local network behind the ASA I can ping the computers behind routers.

    but computers behind routers, I cannot ping PSC behind ASA.

    I have configured the remote access with vpn cisco 4.X client, it works well with routers, but cannot work with asa.

    the asa is connected to the wan via zoom router (adsl)

    Are you telnet in the firewall?

    Follow these steps to display the debug output:

    monitor terminal

    farm forestry monitor 7 (type this config mode)

    Otherwise if its console, do "logging console 7'.

    can do

    Debug crypto ISAKMP

    Debug crypto ipsec

    and then generate a ping from one device to the back of the ASA having 192.168.200.0 address towards one of the VPN subnets... and then paste the result here

    Concerning

    Farrukh

  • How to pass the traffic of a site VPN S2S by ASA to another S2S VPN site?

    I have a need for hosts on separate VPN networks connected to my ASA corp to communicate among themselves.  Example: Host A site 1 a need to communicate with host B on the site 2.  Both sites 1 & 2 are connected via the VPN S2S.  I would get every site traffic to flow through the ASA at the other site.  Where should I start my configuration?  NAT? ACL?

    I can ping each host in the network Corp. but cannot ping from one site to the other.  I set up same-security-traffic permit intra-interface and addition of NAT and rules the ACL to allow/permit 1 Site to contact Site 2.  When I do a trace of package through Deputy Ministers DEPUTIES, packets are allowed to pass. I read different that tell no NAT y at - it something at the other end of the VPN to do?  should NAT and ACLs rules be mirrored? Just in case, a site is an instance of MS Azure VM and the other is a 3rd party VM instance.

    On the HubASA, can I set up a new card encryption that selects the Site1 Site2 traffic and protect the traffic and value her counterpart Site2 public IP or just add this selection of traffic to the existing encryption card for the existing tunnel between HubASA and Site2?

    Just add this traffic to the existing encryption card.

    Remember that this should be added on three routers (two hubs and there has been talk).

    Site1

    CRYPTO ip access list allow Site2 subnet >

    CRYPTO ip access list allow subnet training3 >

    CRYPTO ip access list allow subnet HUB >

    Site2

    CRYPTO ip access list allow Site1 subnet >

    CRYPTO ip access list allow subnet training3 >

    CRYPTO ip access list allow subnet HUB >

    Training3

    CRYPTO ip access list allow Site1 subnet >

    CRYPTO ip access list allow Site2 subnet >

    CRYPTO ip access list allow subnet HUB >

    HUB

    CRYPTO_1 ip access list allow Site1 subnet >

    CRYPTO_1 ip access list allow Site1 subnet >

    CRYPTO_1 ip access list allow Site1 subnet >

    CRYPTO_2 ip access list allow Site2 subnet >

    CRYPTO_2 ip access list allow Site2 subnet >

    CRYPTO_2 ip access list allow Site2 subnet >

    CRYPTO_3 ip access list allow subnet training3 >

    CRYPTO_3 ip access list allow subnet training3 >

    CRYPTO_3 ip access list allow subnet training3 >

    Each of these ACLs is attributed to their respective crypto cards.  CRYPTO_1 is assigned the site1 crypto map, CRYPTO_2 is assigned to the site2 crypto card... etc.

    I hope that's clear

    In addition to this, you need to configure identity NAT / NAT provides both the HUB and the spokes of sites.

    --

    Please do not forget to select a correct answer and rate useful posts

  • With the help of ASA 5510 L2L and VPN L2TP

    I would let my remote users access to all resources bhind the ASA and my remote branches.

    Here's my setup.  ASA5510 as a hub to the data center.

    172.21.x.x of internal network directly connected

    DMZ directly connected 172.22.1.x.x

    L2L branch1 VPN 10.47.x.x

    L2L branch2 VPN 10.47.y.x

    172.21.y.x remote users L2TP Windows Client

    I can access my internal resources related to the ASA but not the DMZ or branch offices. I need injection road routing and reverse?

    You also need to configure crossed.  http://goo.GL/vLqAR

  • ASA 5510 & Windows XP VPN Client

    I want to use the VPN in Windows XP client to connect to the ASA

    VPN access
    .  I read the document after document, and I just can't get to work.  It seems what Phase 1 but I can't get the Phase 2.  In the logs ASDM, it shows that I get some QM WSF Errorsand on the Windows XP computer, I get an error 789.  I put the pre-shared on the XP machine as a result and another j.4 measures.

    I am quite new to the method of L2TP VPN, I've always used Windows Server for the VPN and now I am to find out why.  In any case, I'm sure I'm missing some info that is needed to diagnose, but here's a copy of my config.

    I hope someone can point me in the right direction to understand this because I am pulling my hair out!

    Thanks in advance!

    This set of transformation is fixed for the transport mode but not used.

    Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA ikev1
    transport mode encryption ipsec transform-set TRANS_ESP_3DES_SHA ikev1

    First, it must ensure that it is used in the list of games to turn in 'dynamic crypto-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set... ». L2TP/IPSec requires this mode.

    If it still fails, try to get him debugs following during the connection to your customer.

    Debug crypto isa 127

    Debug crypto ipsec

    Debug aaa 127 Commons

    SPSP

  • Our ASA 5510 can provide VPN to our LAN cloud?

    Hi people,

    We have a number of (1 7 or if virtual, dedicated) servers hosted in a cloud provider well known on the West coast of the USA.

    They just put an ASA5510 across our LAN Server to help protect the servers.

    I was wondering if it is possible that the ASA5510 can provide VPN access to our LAN cloud? At the moment we have the firewall block - all - ports except 80/443/3389 (RDP for our Windows servers).

    I was actually hoping to block port 3389, so nobody can RDP on all servers. BUT... VPN in our LAN cloud, then we can connect to a server via RDP or any software / port. Indeed, the VPN opens all ports... you have created a VPN tunnel has provided

    So is this possible? The ASA5510 this offer?

    Last question-> and it's a ballast: gulp:...

    We cannot install any client software 3rd party... including any cisco vpn client software. We must use the built in software Windows7 VPN... making PPTP, SSTP, L2TP-IPSEC.

    So... now the ASA5510 can offer that? If so... is there any special scripts or configs I need to give to the Cloud hosting provider, so they can set the machine to work?

    Help, please!

    -Jussy-

    Two possibilities come to mind.

    -Built-in L2tp over Ipsec client.

    ASA config Guide:

    http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/l2tp_ips.html

    -Clientless webvpn (if RDP and other plugins, but requires java/activeX for some features...

    http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/WebVPN.html

    These options should work except ASA is in mode multi-conext.

    M.

  • Split DNS on ASA 5510 access remote vpn works not

    I connect successfully to the tunnel and can ping hosts remotely by IP but am unable to browse the internet from the VPN client. Also, the resolution of host name on the remote end does not work... can only connect through the IP address. Ideas? Thanks again!

    Your group policy will SUFFER a good split tunneling and divide the dns settings. But I think that you are awarded the DfltGrpPolicy rather than your group policy will SUFFER because group policy is not set in your group of tunnel, nor be transmitted from authentication.

    Make a vpn-sessiondb distance 'show' to confirm what group policy is assigned to fix it, assign your group policy will BE to your group of tunnel as follows:

    global-tunnel-group attributes

    Will BE by default-group-policy

    -heather

  • ASA with several L2L VPN Dynamics

    I have an ASA 5510 such as VPN, used for about 30 L2L - VPN concentrator.

    I need also some VPN L2L with dynamic peer remote.

    While the configuration for a single dyn - VPN is quite simple (as described in several examples), how can I configure the ASA in the case of many dyn - VPN?

    Basically, all the VPN - dyn must use the same PSK (the DefaultL2LGroup).

    But using the "aggressive" on the remote peer mode, I could use a different PSK for every dyn - VPN:

    tunnel-group ipsec-attributes ABCD

    pre-shared-key *.

    This configuration is correct?

    Best regards

    Claudio

    Hello

    Maybe the solutions provided in the following document may also be an option to configure multiple dynamic VPN L2L connections on the SAA

    http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a0080bc7d13.shtml

    Hope this helps

    -Jouni

  • S2S VPN Asa 5510 to 5505 no traffic passing (hair Pulling)

    I have one site to another configured between a 5505 and ASA 5510, the tunnel is in place but can not pass any traffic one way or another. A 5510, 8.4.3 while the 5505 was 8.2. I find the version 8.2 the less confusing when configure the VPN. The new NAT throws me for a loop on the 5510. I have 1 tunnel upward and will already and it works fine. But when I do a new online, it won't pass any traffic.

    The traffic I'm EFS is 5510 (192.168.180.0/24, 172.25.11.0/24)<-------> 5505 (192.168.197.0/24) many thanks in advance!

    Here's the configs for the two.

    main site of 5510

    ASA Version 8.4(3) ! hostname ASA5510 domain-name fphc.us enable password dmbm8Lq9pBST.0kk encrypted passwd dmbm8Lq9pBST.0kk encrypted names ! interface Ethernet0/0 nameif Outside security-level 0 ip address x.x.x.130 255.255.255.240 ! interface Ethernet0/1 nameif Inside security-level 100 ip address 192.168.180.253 255.255.254.0 ! interface Ethernet0/2 speed 100 duplex full shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 no ip address management-only ! boot system disk0:/asa843-k8.bin ftp mode passive clock timezone CST -6 clock summer-time CDT recurring dns domain-lookup Inside dns server-group DefaultDNS name-server 192.168.180.231 name-server 192.168.180.232 name-server 192.168.180.233 domain-name fphc.us same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj-192.168.180.0 subnet 192.168.180.0 255.255.254.0 object network obj-192.168.188.0 subnet 192.168.188.0 255.255.255.0 object network obj-216.86.7.128 subnet x.x.x.128 255.255.255.240 object network Mobile_Unit subnet 192.168.193.0 255.255.255.0 object network obj-172.27.0.0 subnet 172.27.0.0 255.255.255.0 object network obj_any subnet 0.0.0.0 0.0.0.0 object network obj-172.25.11.0 subnet 172.25.11.0 255.255.255.0 object network obj-172.35.0.0 subnet 172.35.0.0 255.255.254.0 object network SpamBox_1 host 192.168.180.244 object network SpamBox_2 host 192.168.180.248 object network Exchange host 192.168.180.235 object network PMG subnet 192.168.178.0 255.255.255.0 object network Outside_Gateway host x.x.x.129 object network AHCCN subnet 172.35.0.0 255.255.254.0 object network MM subnet 10.90.254.0 255.255.255.0 object network NETWORK_OBJ_172.27.0.0_25 subnet 172.27.0.0 255.255.255.128 object network NETWORK_OBJ_172.27.0.0_26 subnet 172.27.0.0 255.255.255.192 object network obj-172.35.1.199 host 172.35.1.199 object network obj-192.168.51.5 host 192.168.51.5 object service 6004 service udp destination eq 6004 object network AT_Remote subnet 192.168.197.0 255.255.255.0 object-group service DM_INLINE_SERVICE_2 service-object icmp echo service-object icmp echo-reply service-object tcp-udp destination eq domain service-object tcp-udp destination eq www object-group network DM_INLINE_NETWORK_1 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_2 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_3 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_16 network-object object MM network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group icmp-type DM_INLINE_ICMP_1 icmp-object echo icmp-object source-quench object-group network DM_INLINE_NETWORK_5 network-object object AHCCN network-object object MM network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_6 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_4 service-object icmp service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_5 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object tcp destination eq ssh service-object icmp echo service-object icmp echo-reply service-object udp destination eq ntp service-object udp destination eq time object-group service DM_INLINE_SERVICE_6 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object tcp destination eq ssh service-object icmp echo service-object icmp echo-reply service-object udp destination eq ntp service-object udp destination eq time object-group service DM_INLINE_SERVICE_0 service-object icmp echo service-object icmp echo-reply service-object tcp destination eq www service-object tcp destination eq https service-object tcp destination eq smtp service-object tcp-udp destination eq domain service-object object 6004 object-group network DM_INLINE_NETWORK_7 network-object object MM network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 network-object object obj-172.35.0.0 object-group network DM_INLINE_NETWORK_8 network-object 172.25.11.0 255.255.255.0 network-object 172.35.0.0 255.255.254.0 object-group service DM_INLINE_SERVICE_7 service-object tcp-udp destination eq domain service-object object 6004 service-object icmp echo service-object icmp echo-reply service-object tcp destination eq www service-object tcp destination eq https service-object tcp destination eq smtp object-group network DM_INLINE_NETWORK_10 network-object 172.25.11.0 255.255.255.0 network-object 172.35.0.0 255.255.254.0 object-group network DM_INLINE_NETWORK_9 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 object-group network DM_INLINE_NETWORK_11 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_1 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group network DM_INLINE_NETWORK_13 network-object object AHCCN network-object object obj-172.25.11.0 object-group network DM_INLINE_NETWORK_14 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_12 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_3 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group service DM_INLINE_SERVICE_8 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group service Exchange-6001 udp port-object range 6001 6004 object-group network DM_INLINE_NETWORK_15 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_10 service-object ip service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_9 service-object ip service-object icmp echo service-object icmp echo-reply service-object tcp-udp destination eq domain service-object tcp destination eq citrix-ica service-object tcp destination eq www service-object tcp destination eq https object-group network DM_INLINE_NETWORK_18 network-object object AHCCN network-object object obj-172.25.11.0 object-group network DM_INLINE_NETWORK_19 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_20 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_17 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_10 object PMG access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_1 192.168.188.0 255.255.255.0 access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_7 object obj-172.27.0.0 access-list Outside_1_cryptomap extended permit ip 192.168.188.0 255.255.255.0 object-group DM_INLINE_NETWORK_14 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_9 object AT_Remote object-group DM_INLINE_NETWORK_15 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_4 any any access-list Outside_access_in extended permit ip object Mobile_Unit object-group DM_INLINE_NETWORK_12 log debugging access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_7 object PMG object-group DM_INLINE_NETWORK_8 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_0 any object Exchange access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_5 any object SpamBox_1 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_6 any object SpamBox_2 access-list Outside_access_in extended permit ip 192.168.188.0 255.255.255.0 object-group DM_INLINE_NETWORK_2 access-list Outside_access_in extended deny ip 127.0.0.0 255.255.255.0 any log access-list Outside_access_in extended deny ip 10.0.0.0 255.255.255.0 any log access-list Outside_access_in extended deny ip 169.254.0.0 255.255.0.0 any log access-list Outside_access_in extended deny ip 224.0.0.0 255.0.0.0 any log access-list Outside_access_in extended deny ip 239.0.0.0 255.0.0.0 any log access-list Outside_access_in extended deny ip 173.0.0.0 255.0.0.0 any log debugging access-list Outside_access_in extended deny ip 224.0.0.0 255.255.255.31 any access-list Outside_access_in extended deny ip 192.168.0.0 255.255.0.0 any access-list Outside_access_in extended deny ip any any access-list global_mpc extended permit ip any any access-list global_access extended permit udp object obj-172.35.1.199 any eq snmp log disable access-list global_access extended permit ip object obj-172.27.0.0 any access-list splitTunnelAcl standard permit 192.168.180.0 255.255.254.0 access-list splitTunnelAcl standard permit 172.35.0.0 255.255.254.0 access-list splitTunnelAcl standard permit 172.25.11.0 255.255.255.0 access-list splitTunnelAcl standard permit 10.90.254.0 255.255.255.0 access-list Outside_cryptomap_1 extended permit ip object PMG object-group DM_INLINE_NETWORK_13 access-list Inside_access_in extended permit ip object obj_any any access-list Inside_access_in extended permit icmp any any object-group DM_INLINE_ICMP_1 log disable access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_8 object Exchange any log access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_1 object SpamBox_1 any log access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_3 object SpamBox_2 any log access-list Inside_access_in extended deny ip any any access-list Outside_cryptomap_2 extended permit ip object-group DM_INLINE_NETWORK_17 object AT_Remote access-list Outside_cryptomap extended permit ip object-group DM_INLINE_NETWORK_18 object PMG log access-list Outside_cryptomap_4 extended permit ip object-group DM_INLINE_NETWORK_3 object Mobile_Unit pager lines 24 logging enable logging timestamp logging emblem logging rate-limit unlimited level 1 logging rate-limit unlimited level 6 logging rate-limit unlimited level 7 mtu Outside 1500 mtu Inside 1500 mtu management 1500 ip local pool Client_Pool 172.27.0.50-172.27.0.100 mask 255.255.255.0 ip local pool RA_POOL 172.27.0.1-172.27.0.49 mask 255.255.255.0 ip verify reverse-path interface Outside ip verify reverse-path interface Inside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any Outside icmp permit any Inside asdm history enable arp timeout 14400 nat (Inside,Outside) source static DM_INLINE_NETWORK_9 DM_INLINE_NETWORK_9 destination static PMG PMG no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_20 DM_INLINE_NETWORK_20 destination static AT_Remote AT_Remote no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_5 DM_INLINE_NETWORK_5 destination static NETWORK_OBJ_172.27.0.0_25 NETWORK_OBJ_172.27.0.0_25 no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_16 DM_INLINE_NETWORK_16 destination static NETWORK_OBJ_172.27.0.0_26 NETWORK_OBJ_172.27.0.0_26 no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 destination static obj-192.168.188.0 obj-192.168.188.0 no-proxy-arp nat (Inside,Outside) source static DM_INLINE_NETWORK_19 DM_INLINE_NETWORK_19 destination static Mobile_Unit Mobile_Unit no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_11 DM_INLINE_NETWORK_11 destination static AT_Remote AT_Remote no-proxy-arp route-lookup ! object network obj_any nat (Inside,Outside) dynamic interface object network SpamBox_1 nat (Inside,Outside) static x.x.x.132 object network SpamBox_2 nat (Inside,Outside) static x.x.x.133 object network Exchange nat (Inside,Outside) static x.x.x.131 dns access-group Outside_access_in in interface Outside access-group Inside_access_in in interface Inside access-group global_access global route Outside 0.0.0.0 0.0.0.0 x.x.x..129 1 route Inside 10.90.254.0 255.255.255.0 192.168.180.1 1 route Inside 172.16.200.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.10.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.11.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.12.0 255.255.255.0 192.168.180.200 1 route Inside 172.27.0.0 255.255.255.0 192.168.180.200 1 route Inside 172.29.0.0 255.255.0.0 192.168.180.200 1 route Inside 172.35.0.0 255.255.254.0 192.168.180.200 1 route Inside 192.168.182.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.183.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.184.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.185.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.186.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.187.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.189.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.190.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.191.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.192.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.194.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.195.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.196.0 255.255.255.0 192.168.180.200 1 timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server DC's protocol radius max-failed-attempts 5 aaa-server DC's (Inside) host 192.168.180.231 timeout 5 key ***** user-identity default-domain LOCAL http server enable http 192.168.180.0 255.255.255.0 Inside http 0.0.0.0 0.0.0.0 Inside http 172.27.0.0 255.255.255.0 Outside http 172.27.0.0 255.255.255.0 Inside snmp-server group Authentication&Encryption v3 priv snmp-server user trap Authentication&Encryption v3 encrypted auth md5 87:1d:3a:bd:50:49:7d:dc:45:89:a0:dc:c9:66:ed:78 priv 3des 87:1d:3a:bd:50:49:7d:dc:45:89:a0:dc:c9:66:ed:78:08:c6:ef:b2:7e:89:45:f2:6f:78:b5:01:33:47:68:c9 snmp-server host Inside 172.35.1.199 community ***** version 2c snmp-server host Inside 192.168.180.7 community ***** version 2c snmp-server location MLK snmp-server contact xxxxxxxx snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart snmp-server enable traps syslog snmp-server enable traps ipsec start stop snmp-server enable traps entity config-change fru-insert fru-remove snmp-server enable traps remote-access session-threshold-exceeded snmp-server enable traps cpu threshold rising snmp-server enable traps ikev2 start no sysopt connection reclassify-vpn sysopt connection preserve-vpn-flows crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association lifetime seconds 43200 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map Outside_map 1 match address Outside_1_cryptomap crypto map Outside_map 1 set peer 173.10.204.46 crypto map Outside_map 1 set ikev1 phase1-mode aggressive crypto map Outside_map 1 set ikev1 transform-set ESP-3DES-SHA crypto map Outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map Outside_map 1 set ikev2 pre-shared-key ***** crypto map Outside_map 1 set security-association lifetime seconds 460800 crypto map Outside_map 4 match address Outside_cryptomap_1 crypto map Outside_map 4 set peer 207.190.237.254 crypto map Outside_map 4 set ikev1 phase1-mode aggressive group5 crypto map Outside_map 4 set ikev1 transform-set ESP-AES-128-SHA crypto map Outside_map 4 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map Outside_map 4 set security-association lifetime seconds 460800 crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map 1 match address Outside_cryptomap_2 crypto map outside_map 1 set peer x.x.x.201 crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 2 match address Outside_cryptomap crypto map outside_map 2 set peer x.x.x.254 crypto map outside_map 2 set ikev1 phase1-mode aggressive group5 crypto map outside_map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 2 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map outside_map 3 match address Outside_cryptomap_4 crypto map outside_map 3 set peer x.x.216.130 crypto map outside_map 3 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface Outside crypto ca trustpoint LOCAL-CA-SERVER keypair LOCAL-CA-SERVER crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=FPHC-ASA serial-number keypair LOCAL-CA-SERVER crl configure crypto ca server shutdown crypto ca certificate chain LOCAL-CA-SERVER certificate ca 01     308201ff 30820168 a0030201 02020101 300d0609 2a864886 f70d0101 05050030     13311130 0f060355 04031308 46504843 2d415341 301e170d 31323039 32303232     34393034 5a170d31 35303932 30323234 3930345a 30133111 300f0603 55040313     08465048 432d4153 4130819f 300d0609 2a864886 f70d0101 01050003 818d0030     81890281 8100e841 eeca425c 20c47a19 3b335924 30281111 cff571d7 0bb63dd8     5f3194f5 59d99cb1 60269694 aa13c591 505e0575 2de5ebb1 92d7c931 807f807b     6e84ee54 1da4ccaf 1f109f53 94c6e567 a8064e27 e27f3ea0 94f7bf32 2fe6064c     c2bbcd0d 7b0f8806 8614fcf9 80c6e4e1 83da75c5 080c7117 09e1d574 f17de8ac     1da4f2f9 f6e10203 010001a3 63306130 0f060355 1d130101 ff040530 030101ff     300e0603 551d0f01 01ff0404 03020186 301f0603 551d2304 18301680 144cb3da     6b6a5a14 c4b78674 49609b6b 8e58ea5f a3301d06 03551d0e 04160414 4cb3da6b     6a5a14c4 b7867449 609b6b8e 58ea5fa3 300d0609 2a864886 f70d0101 05050003     818100e0 7c9e15c3 13068614 788ff4d3 f282a4f4 fde72b00 3b05748f 0a4f68ec     6a7eb5fb 40c6d505 b1c35372 87102173 bb017e4b 2697c8f5 b66395f2 1418c77c     3e959343 84674b96 33558a08 629336c8 39c742bf 6b727b00 388a7102 8619cb5a     e4227aaf b58e267c 9e8b23d6 94cdc789 eb29cd96 1e579770 a2aa58ab 40694bb9 12888d   quit crypto ca certificate chain ASDM_TrustPoint0 certificate bd555b50     308201f7 30820160 a0030201 020204bd 555b5030 0d06092a 864886f7 0d010105     05003040 3111300f 06035504 03130846 5048432d 41534131 2b301206 03550405     130b4a4d 58313632 33583130 51301506 092a8648 86f70d01 09021608 46504843     2d415341 301e170d 31323039 32303232 35383434 5a170d32 32303931 38323235     3834345a 30403111 300f0603 55040313 08465048 432d4153 41312b30 12060355     0405130b 4a4d5831 36323358 31305130 1506092a 864886f7 0d010902 16084650     48432d41 53413081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902     818100e8 41eeca42 5c20c47a 193b3359 24302811 11cff571 d70bb63d d85f3194     f559d99c b1602696 94aa13c5 91505e05 752de5eb b192d7c9 31807f80 7b6e84ee     541da4cc af1f109f 5394c6e5 67a8064e 27e27f3e a094f7bf 322fe606 4cc2bbcd     0d7b0f88 068614fc f980c6e4 e183da75 c5080c71 1709e1d5 74f17de8 ac1da4f2     f9f6e102 03010001 300d0609 2a864886 f70d0101 05050003 8181008b c7a3e119     f1c6f60c 56ab7fd4 5096cfdf abb44331 fe3a0249 7f5fe79b 38a044c2 9a8b907d     12feba5d 6298a414 c4973369 040585b8 26b8b29e dfe7e226 0b10d08e 03658648     2fb0233e 27204339 c5a1c270 a0fec5b4 834340ac 9afefe75 4f802cb6 fb21b89c     9016e32c 2e772c00 191d23e0 036c4321 93a43b48 a6b682af 5dd5c0   quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable Outside crypto ikev1 enable Outside crypto ikev1 enable management crypto ikev1 policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 192.168.180.0 255.255.255.0 Inside telnet 172.27.0.0 255.255.255.0 Inside telnet timeout 10 ssh 192.168.180.0 255.255.255.0 Inside ssh 172.27.0.0 255.255.255.0 Inside ssh timeout 20 console timeout 0 management-access Inside vpn load-balancing interface lbpublic Outside interface lbprivate Inside threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp authenticate ntp server 50.77.217.185 source Outside prefer ntp server 216.171.120.36 source Outside webvpn group-policy "S2S-RA-Group Policy" internal group-policy "S2S-RA-Group Policy" attributes vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client group-policy DfltGrpPolicy attributes vpn-filter value Inside_nat0_outbound vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless group-policy GroupPolicy_x.x.x.46 internal group-policy GroupPolicy_x.x.x.46 attributes vpn-filter value Outside_1_cryptomap vpn-tunnel-protocol ikev1 ikev2 group-policy GroupPolicy_x.x.x.254 internal group-policy GroupPolicy_x.x.x.254 attributes vpn-filter value Outside_cryptomap_1 vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec group-policy GroupPolicy_x.x.x.201 internal group-policy GroupPolicy_x.x.x.201 attributes vpn-filter value Outside_cryptomap_2 vpn-tunnel-protocol ikev1 group-policy GroupPolicy_x.x.216.130 internal group-policy GroupPolicy_x.x.216.130 attributes vpn-tunnel-protocol ikev1 group-policy VPN-GROUP2 internal group-policy VPN-GROUP2 attributes dns-server value 192.168.180.231 192.168.180.232 vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value splitTunnelAcl default-domain value fphc.us group-policy VPN-GROUP internal group-policy VPN-GROUP attributes dns-server value 192.168.180.231 192.168.180.232 vpn-filter value splitTunnelAcl vpn-tunnel-protocol ikev1 l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value splitTunnelAcl default-domain value fphc.us username mark password YTp0IwzeNwb5kS8J encrypted privilege 15 tunnel-group DefaultRAGroup general-attributes default-group-policy VPN-GROUP tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 general-attributes default-group-policy GroupPolicy_x.x.x.46 tunnel-group x.x.x.46 ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group x.x.x.201 type ipsec-l2l tunnel-group x.x.x.201 general-attributes default-group-policy GroupPolicy_x.x.x.201 tunnel-group x.x.x.201 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group VPN-GROUP type remote-access tunnel-group VPN-GROUP general-attributes address-pool Client_Pool authentication-server-group DC's default-group-policy VPN-GROUP tunnel-group VPN-GROUP ipsec-attributes ikev1 pre-shared-key ***** tunnel-group x.x.x.254 type ipsec-l2l tunnel-group x.x.x.254 general-attributes default-group-policy GroupPolicy_x.x.x.254 tunnel-group x.x.x.254 ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group VPN-GROUP2 type remote-access tunnel-group VPN-GROUP2 general-attributes address-pool RA_POOL authentication-server-group DC's default-group-policy VPN-GROUP2 tunnel-group VPN-GROUP2 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group x.x.x.130 type ipsec-l2l tunnel-group x.x.x.130 general-attributes default-group-policy GroupPolicy_x.x.x.130 tunnel-group x.x.x.130 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group PMG type ipsec-l2l tunnel-group PMG general-attributes default-group-policy GroupPolicy_x.x.x.254 tunnel-group PMG ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group-map default-group DefaultL2LGroup ! class-map global-class match access-list global_mpc class-map inspection_default match default-inspection-traffic class-map http_https description http_https match access-list Outside_access_in ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum client auto   message-length maximum 512 policy-map global_policy class inspection_default   inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options class global-class   user-statistics accounting policy-map http_https class http_https   set connection timeout idle 1:15:00 reset   user-statistics accounting ! service-policy global_policy global service-policy http_https interface Outside smtp-server 192.168.180.235 prompt hostname context no call-home reporting anonymous Cryptochecksum:fcb4c2d9a982c11054c31ee4db778012 : end 

    5505 remote site

    ASA Version 8.2(5) ! hostname AT-Remote domain-name fphc.us enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted names name 172.35.0.0 AHCCN name 172.25.11.0 AHCCN-1 name 192.168.180.0 FPHC ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport trunk allowed vlan 1,30 switchport trunk native vlan 1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.197.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address x.x.x.201 255.255.255.252 ! ! boot system disk0:/asa825-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 68.87.68.162 name-server 68.87.74.162 domain-name fphc.us dns server-group DNS_Internal name-server 192.168.180.231 name-server 192.168.180.232 domain-name fphc.us same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network obj_any object-group network 172.25.11.0 object-group network 172.35.0.0 object-group network 192.168.180.0 object-group network ASA-FW object-group network Comcast_Outside object-group network AT_Local object-group network NETWORK_OBJ_192.168.197.0_24 object-group icmp-type DM_INLINE_ICMP_1 icmp-object echo icmp-object echo-reply object-group service DM_INLINE_SERVICE_3 service-object ip service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_2 service-object ip service-object icmp object-group network obj_remote object-group network Franklin_Remote network-object AHCCN-1 255.255.255.0 network-object AHCCN 255.255.254.0 network-object FPHC 255.255.254.0 access-list outside_access_in extended permit ip object-group Franklin_Remote 192.168.197.0 255.255.255.0 access-list outside_access_in extended permit icmp any any object-group DM_INLINE_ICMP_1 log debugging access-list inside_access_in extended permit ip any any log access-list inside_access_in extended permit icmp any any echo log access-list outside_1_cryptomap extended permit ip 192.168.197.0 255.255.255.0 object-group Franklin_Remote access-list inside_nat0_outbound extended permit ip 192.168.197.0 255.255.255.0 object-group Franklin_Remote access-list inside_nat_outbound extended permit ip any interface outside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any outside asdm image disk0:/asdm-645.bin no asdm history enable arp timeout 14400 global (outside) 101 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 101 access-list inside_nat_outbound access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 x.x.x.202 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 0.0.0.0 0.0.0.0 inside http 192.168.197.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sysopt connection preserve-vpn-flows sysopt noproxyarp inside sysopt noproxyarp dmz crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 43200 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set peer 216.86.7.130 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491     308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130     0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117     30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b     13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504     0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72     20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56     65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043     65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31     30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b     30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20     496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65     74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420     68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329     3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365     63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7     0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597     a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10     9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc     7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b     15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845     63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8     18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced     4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f     81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201     db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868     7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101     ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8     45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777     2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a     1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406     03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973     69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403     02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969     6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b     c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973     69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30     1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603     551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355     1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609     2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80     4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e     b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a     6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc     481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16     b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0     5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8     6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28     6c2527b9 deb78458 c61f381e a4c4cb66   quit crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 20 authentication rsa-sig encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 30 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 40 authentication crack encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 50 authentication rsa-sig encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 60 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 70 authentication crack encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 80 authentication rsa-sig encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 90 authentication pre-share encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 100 authentication crack encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 110 authentication rsa-sig encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 120 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 130 authentication crack encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 140 authentication rsa-sig encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 150 authentication pre-share encryption des hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet x.x.x.130 255.255.255.255 outside telnet timeout 5 ssh timeout 5 console timeout 0 management-access inside dhcpd address 192.168.197.25-192.168.197.100 inside dhcpd dns 192.168.180.232 68.87.74.162 interface inside dhcpd domain fphc.us interface inside dhcpd enable inside ! dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics host threat-detection statistics protocol threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DfltGrpPolicy attributes vpn-filter value outside_1_cryptomap group-policy GroupPolicy_216.86.7.130 internal group-policy GroupPolicy_216.86.7.130 attributes vpn-filter value inside_nat0_outbound vpn-tunnel-protocol IPSec l2tp-ipsec tunnel-group x.x.x.130 type ipsec-l2l tunnel-group x.x.x.130 general-attributes default-group-policy GroupPolicy_216.86.7.130 tunnel-group x.x.x.130 ipsec-attributes pre-shared-key ***** tunnel-group-map default-group DefaultL2LGroup ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum 512 policy-map global_policy class inspection_default   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options   inspect dns ! service-policy global_policy global prompt hostname context : end 

    Hello

    The reason for the DECLINE suggests that the ASA has still attached to the L2L VPN VPN filter configuration that prevents traffic.

    Check the configuration and remove atleast VPN filter temporarily for testing purposes.

    -Jouni

  • ASA 5510 to Sonicwall TZ205 - ASA 9.1.6 upgrade breaks Tunnel VPN

    After reclassification of 8.4.5 to 9.1.6 my tunnel from site to site between an ASA 5510 and a Sonicwall TZ 205 is 'up' and I can ping the external interface of the other but I can't ping LAN to LAN.

    Hey Kevin,

    They should not be a difference on the config VPN between these versions, can you try to run a packet - trace on the SAA or place a screenshot inside while sending traffic.

    Example:

    entry Packet-trace within the icmp < src="" ip=""> 8 0

    Capture the vpn inside the match ip host host interface

    It may be useful

    -Randy-

  • All necessary licenses on ASA 5510 for old Cisco VPN Client

    We're trying to migrate our firewall Watchguard to a Cisco ASA 5510, who bought some time ago. For some reason, all of our users have already installed the old Cisco VPN client. I think it will work. Are there licensing issues on the 5510 I had to be concerned with?  No matter what special config that needs to be done on the 5510?

    Fix. You don't require licensing of AnyConnect of any type of configuration and the use of IKEv1 IPsec remote access VPN (which use the old Cisco VPN client).

    You will be limited to 250 active IPsec peers (remote access more no matter what VPN site-to-site) by the platform (hardware) device capabilities that are enforced by the software.

  • VPN Cisco ASA 5510 - 250 licenses?

    I can't find a clear answer on this.  I see that only 2 SSL VPN clients are included, but if I buy an ASA 5510 (ASA5510-BUN-K9), am I allowed to use as a VPN endpoint for up to 250 customers?  If so, is it a total of VPN 'site-to-site' and 'customer '?

    For IPSec VPN (IPSec VPN site-to-site and remote client access), there is no additional license required as it is included in the device.

    For SSL VPN, there is failure to license 2, and if you need more than 2 connections SSL VPN Client, then Yes, you must purchase an additional license (the AnyConnect Essentials or the AnyConnect license Premium depending on what you need).

  • ASA 5510 &amp; ASA 5505 VPN

    I have an ASA 5510 in HQ (Version 8.0 (3)) and an ASA 5505 (8.3 (1)) Version at remote end.  I am using easy vpn.  The vpn works fine, but when the VPN is connected the 5510 shows 17 IPSEC connections to this one device.  I watch the 5505 and it says 1.

    Thank you!

    Yes, it will create SAs for each subnet you have an ITS twinning with the remote subnet ASA 5505 and one ITS twinning with the ip of the remote ASA 5505 peer.

    He created the pair of HIS extra with the IP peer of the ASA remote for easy vpn (it is normal in easy vpn). If you configure LAN-to-LAN between the ASAs 2, it will be just half of the SAs because there won't be ITS created for peers like in the easy vpn tunnel ip address.

    Here are the SAs created matching:

    local ident (addr, mask, prot, port): (64.196.6.165/255.255.255.255/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.20.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.20.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.30.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.30.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.70.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.70.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.71.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.71.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.80.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.80.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.81.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.81.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.88.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.88.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (192.168.1.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (192.168.1.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

  • Unable to connect to server vpn behind ASA 5510 with windows clients

    Hi all

    I've seen a number of posts on this and followed by a few documents of support on this issue, but I'm totally stuck now, nothing seems to work for me.

    This is the usual scenario, I have a VPN windows 2003 Server sat on the lan deprived of our ASA 5510 firewall, and I try to get my Windows XP / 7 laptop computers to connect to it.

    Within the ASDM:

    (1) Server Public created for Protocol 1723

    (2) Public created for the GRE protocol Server

    3) created two public servers have the same public and private addresses

    (4) the foregoing has created config Public Private static route in the section NAT firewall

    (5) rules to Firewall 2 also created above on the external interface for both 1723 and GRE

    When you try to connect, I get the following entry in the debug log.

    6 August 6, 2010 17:09:37 302013 195.74.141.2 1045 1723 ChamberVPN-internal built ride connection TCP 1889195 for outside:195.74.141.2/1045 (195.74.141.2/1045) to the inside: ChamberVPN-internal/1723 (XXX.XXX.XXX.XXX/1723)

    but nothing else.

    The server shows not attempting a connection so I think I'm missing something on the firewall now.

    Also inside interface there is a temporary rule:

    Source: no

    Destination: any

    Service: IP

    Action: enabled

    This should allow all outbound traffic only as far as I know...

    Any help would be greatly appreciated.

    Chris

    Hi Chris,

    ASA newspaper indicates that the connection is interrupted because of "syn timeout. This means that asa receives no response from the Windows Server. Right now, we need to clarify some points.

    1 - your vpn server committed a correct default gateway error or the path that lies in your fw interface asa.

    is 2 - possible to start capturing packets on Windows Server. Hereby, we can get data flow information beetween client and server. And we can be sure that Windows Server wonders vpn.

    Ufuk Güler

Maybe you are looking for

  • Satellite X 200 freezes after 15 minutes of inactivity

    I'm tired of this problem: my laptop freezes after 15 minutes of inactivity and I can get it going again to reset. The problem was solved when I reinstall Vista, but after several months my laptop started hanging up. And my laptop is unable to instal

  • Satellite P10 - 554 nvidia geforce fx go5600 update driver

    Hi all I just tried to upgrade to the latest version of the driver nvidia 78.01. Running the install I got an error message stating that the installation routine could not find a driver that is compatible with the hardware installed. According to the

  • Dc7900: Hardware compatibility with HP DC7900

    Hello everyone. I have a question: I need to change the RAM and add a Video card in my PC Desktop DC7900. I already opened it, and saw that the RAM compatibility is as "with the hole in the middle of the RAM" So I guess it's DDR2 I have to buy. Do yo

  • Win 7-PC is not Accessible

    I have 2 separate computers, desktop running Win 7 Professional Edition.   My computer adding is a netbook (laptop) and it is running Vista Home Edition.   When I connect network using the laptop, I see my desktop PC in the working group with my work

  • Envy 14-3010NR wireless adapter issues, this is a strange...

    Hello, I have a 3010NR Envy14 spectrum with Intel Centrino Advanced N6230 wireless adapter. Driver is 15.9.0.5 dated 16/06/13 dated. I've updated the operating system first to W8 and then to W8.1, since I had problems with the wireless, I had to work