ASA 5520 to Juniper ss505m vpn
I'm having a problem with the vpn site to site between a asa 5520 and Juniper ss 505 m. The tunnel rises, but we seem unable to pass traffic through the vpn tunnel. It appears on the remote side makes a connection to the ftp server on the Local Server, but is never prompt identification of connection information.
April 19, 2016 13:27:13 SQL-B2B-01: % ASA-4-402116: IPSEC: received a package ESP x.x (SPI = 0xD167A5E8, sequence number = 0xD).
241.90 (user = X.X.241.90) at X.X.167.230. Inside the package décapsulés does not match policy negotiated in the SA. The
package specifies its destination as its Protocol TCP, its source such as X.X.2.68 and X.X.167.233. SA specifies its loc
proxy of Al X.X.167.233/255.255.255.255/tcp/5376 and his remote_proxy as X.X.2.68/255.255.255.255/tcp/5376.
list of remote ip-group of objects allowed extended West Local Group object
NAT static Local_Pub Local destination (indoor, outdoor) static source Remote
Crypto ipsec ikev1 transform-set esp-aes-256 Remote esp-sha-hmac
West-map 95 crypto card is the Remote address
card crypto West-map 95 set peer X.X.241.90
map West-map 95 set transform-set Remote ikev1 crypto
card crypto West-map 95 defined security-association life seconds 28800
Juniper-
"Remote-ftp" X.X.167.233 255.255.255.255
Gateway proposal P1 preshare "[email protected]/ * /" proposal "pre-g2-aes256-sha-28800.
P2-proposal "no-pfs-esp-aes256-sha-28800" No. - pfs esp aes256 sha-1 second 28800
----------------------
the top of the policy of "Trust" to "Untrust" "X.X.2.68/32" "Remote-ftp' 'ftp' vpn"Remote-vpn"tunnel log
put on top of the "Untrust" policy to the "Trust" "Remote-ftp' 'X.X.2.68/32' 'ftp' vpn"SonoraQ-vpn"tunnel sign
I do not know Juniper, but it seems that it is trying to negotiate the use of only 5376/tcp on the tunnel, when it should be negotiated just Protocol "ip".
Tags: Cisco Security
Similar Questions
-
ASA 5520 customize logo in vpn without customer portal
Hello world:
I, m set up the clientless vpn functionality in my asa 5520 version 8.2. Now I m trying to customize the clientless vpn portal. I want to change the logo of Cisco in the portal of a corporate logo but I find the option of the Don t. In addition, I want to change the language of the Help menu.
Can someone help me?
Thank you.
Concerning
Hello
Please see the bulletin:
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a008094abcb.shtml#logo
Thank you!
-Jason
-
Cisco ASA 5520 cannot ping between VPN Tunnels
I have the main site and sites A and B. A to connect to the hand and B connects to the main. I can ping from A hand and has for main. I can ping from main to B and B to main. However, I can not ping from A to B. A and B are sonicwall 2040 and main is a 5520. The question should not be with the 5520 none allowing traffic between the two VPN Tunnels, but I can't understand why it does not work. Can someone give an idea on that? Thanks in advance.
Hello
I see that you use ASDM. Always makes my eyes bleed when I need to look at the DM_INLINE of named objects and try to make sense the CLI format
Seems to me that there are problems with the NAT.
If you don't mind a small break between the main Site and remote locations, I'd say changing some follows the NAT configuration
Remove old
no nat source (indoor, outdoor) public static DM_INLINE_NETWORK_9 DM_INLINE_NETWORK_9 DM_INLINE_NETWORK_10 DM_INLINE_NETWORK_10 non-proxy-arp-search of route static destination
no nat source (indoor, outdoor) public static DM_INLINE_NETWORK_11 DM_INLINE_NETWORK_11 DM_INLINE_NETWORK_12 DM_INLINE_NETWORK_12 non-proxy-arp-search of route static destination
Add a new
object-group network NETWORK-2790
object-network 10.217.0.0 255.255.255.0
object-network 10.217.1.0 255.255.255.0
object-group network NETWORK-3820
object-network 10.216.0.0 255.255.255.0
object-network 10.216.1.0 255.255.255.0
object-group network NETWORK-COLO
object-net 10.8.0.0 255.255.255.0
destination of NETWORK of NETWORK-2790-2790 static NAT (outside, outside) static source NETWORK - 3820 - 3820
NAT static destination of NETWORK of NETWORK-COLO-COLO (indoor, outdoor) static source NETWORK - 2790 - 2790
NAT static destination of NETWORK of NETWORK-COLO-COLO (indoor, outdoor) static source NETWORK - 3820 - 3820
The first new line of configuring NAT manages the NAT0 configuration for traffic between SiteA and SiteB. The following configurations of NAT 2 manage the NAT0 for traffic between the main Site - hand Site SiteA - SiteB
-Jouni
-
What VPN work as a PPTP vpn firewall CISCO-ASA-5520.
Hi all
Can you please tell me which replace the VPN I can configure PPTP on ASA 5520 firewall. What VPN work as a PPTP vpn firewall CISCO-ASA-5520.
You can use the wizard VPN of RA with ASDM and confiugre L2TP IPSEC VPN that does not need a VPN Client must be installed.
Michael
Please note all useful posts
-
Hello
First I must admit that I am not very versed in Cisco equipment or in general IPSEC connections so my apologies if I'm doing something really good obviously stupid, but I checked through any kind of things that I could find on the internet on the configuration of IPSEC VPN.
The setup I have is an asa 5520 (o/s 8.2) firewall which, for now, is connected to a temporary connection beautiful style home broadband for testing purposes. The netopia router is configured to allow ipsec passthrough and redirect 62515 UDP, TCP 10000, 4500 UDP, UDP 500 ports in the asa 5520.
I'm trying to connein out of a laptop with disabled windows firewall and vpn cisco 5.0.02.0090 client version.
I ran several attempts through the ipsec configuration wizard options. most of the time that nothing comes in the newspaper to show that a connection was attempted, but there is a way I can set up product options the following on the firewall log:
4. Sep 24 2010 | 13: 54:29 | 713903 | Group = VPNtest9, IP = 86.44.x.x, error: cannot delete PeerTblEntry
5: Sep 24 2010 | 13: 54:29 | 713902 | Group = VPNtest9, IP = 86.44.x.x, drop table homologous counterpart does not, no match!
6. Sep 24 2010 | 13: 54:21 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF
3: Sep 24 2010 | 13: 54:21 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet.
6. Sep 24 2010 | 13: 54:16 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF
3: Sep 24 2010 | 13: 54:16 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet.
6. Sep 24 2010 | 13: 54:11 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF
3: Sep 24 2010 | 13: 54:11 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet.
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1
6. Sep 24 2010 | 13: 54:06 | 302015 | 86.44.x.x | 51905 | 192.168.0.27 | 500 | Built UDP inbound connection 7487 for Internet:86.44.x.x/51905 (86.44.x.x/51905) at identity:192.168.0.27/500 (192.168.0.27/500)
and this, in the journal of customer:
Cisco Systems VPN Client Version 5.0.02.0090
Copyright (C) 1998-2007 Cisco Systems, Inc.. All rights reserved.
Customer type: Windows, Windows NT
Running: 5.1.2600 Service Pack 3
24 13:54:08.250 24/09/10 Sev = Info/4 CM / 0 x 63100002
Start the login process
25 13:54:08.265 24/09/10 Sev = Info/4 CM / 0 x 63100004
Establish a secure connection
26 13:54:08.265 24/09/10 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "213.94.x.x".
27 13:54:08.437 24/09/10 Sev = Info/6 IKE/0x6300003B
Attempts to establish a connection with 213.94.x.x.
28 13:54:08.437 24/09/10 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 213.94.x.x
29 13:54:08.484 24/09/10 Sev = Info/4 IPSEC / 0 x 63700008
IPSec driver started successfully
30 13:54:08.484 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
31 13:54:13.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021
Retransmit the last package!
32 13:54:13.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x
33 13:54:18.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021
Retransmit the last package!
34 13:54:18.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x
35 13:54:23.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021
Retransmit the last package!
36 13:54:23.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013
SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x
37 13:54:28.484 24/09/10 Sev = Info/4 IKE / 0 x 63000017
Marking of IKE SA delete (I_Cookie = 36C50ACCE984B0B0 R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
38 13:54:28.984 24/09/10 Sev = Info/4 IKE/0x6300004B
IKE negotiation to throw HIS (I_Cookie = 36C50ACCE984B0B0 R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
39 13:54:28.984 24/09/10 Sev = Info/4 CM / 0 x 63100014
Could not establish the Phase 1 SA with the server '213.94.x.x' due to the 'DEL_REASON_PEER_NOT_RESPONDING '.
40 13:54:28.984 24/09/10 Sev = Info/5 CM / 0 x 63100025
Initializing CVPNDrv
41 13:54:28.984 24/09/10 Sev = Info/6 CM / 0 x 63100046
Set indicator established tunnel to register to 0.
42 13:54:28.984 24/09/10 Sev = Info/4 IKE / 0 x 63000001
Signal received IKE to complete the VPN connection
43 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
44 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
45 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014
Remove all keys
46 13:54:29.187 24/09/10 Sev = Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
I have connectivity full http from the internet to a machine inside the asa 5520 so I think that the static routing and NAT'ing should be ok, but I am pleased to provide you with all the details.
Can you see what I'm doing wrong?
Thank you
Sam
Pls add the following policy:
crypto ISAKMP policy 10
preshared authentication
the Encryption
md5 hash
Group 2
You can also run debug on the ASA:
debugging cry isa
debugging ipsec cry
and retrieve debug output after trying to connect.
-
Tunnel VPN ASA 5520 (DMZ + INSIDE) destined for OUTSIDE
I can't find any reference to anywhere else.
We have an ASA 5520 to our site HQ (inside the network) with several regional subnets on the DMZ interface.
We need connectivity VPN Site to Site between the INSIDE and a remote control on the OUTSIDE of the site, as well as between the DMZ subnets and even outside the site. The interface from the OUTSIDE of the SAA must be local VPN endpoint for all tunnels.
I created a S2S VPN between the INSIDE and the OUTSIDE site and it works great.
When I create a VPN S2S tunnel between a site of DMZ and even outside the site (using the same settings the and remote, but with a cryptomap different because the local subnet (DMZ) is different from the other inside the subnet, the traffic gets the mapping (show crypto isakmp his) to the same cryptomap that was created for the access to the tunnel from the OUTSIDE) , instead of to the new cryptomap, so remote endpoint deletes it, and traffic also causes SPI incorrect of for the remote endpoint, which makes the original INTERIOR outside OF THE VPN tunnel to fall from time to time.
Is this a bug?
I also did a local S2S VPN tunnel configuration test of networks as everything INSIDE and the DMZ. With the help of the wizard VPN S2S leads ASA only to create a NAT rule exempted for the subnet on the INSIDE interface. Can I manually create another tax-exempt NAT rule to the side of the DMZ and use this a S2S tunnel to connect sites inside and DMZ to the remote OFF-SITE in a connection profile?
I'm building a Rube Goldberg?
Thank you
George
Hi George,.
It seems you have a situation overlapping it, are you sure that subnets inside did not overlap with the networks from the DMZ? A package tracer could clarify wha that the ASA is actually sending.
In addition, you can merge the two interfaces on the same card encryption if you wish, just make sure that the NAT is configured correctly. For example; Source NAT (all, outside) static...
It may be useful
-Randy-
-
VPN site to site &; outdoor on ASA 5520 VPN client
Hi, I'm jonathan rivero.
I have an ASA 5520 Version 8.0 (2), I configured the site-to-site VPN and works very well, in the other device, I configured the VPN Client for remote users and works very well, but I try to cofigure 2 VPNs on ASA 5520 on the same outside interface and I have the line "outside_map interface card crypto outdoors (for VPN client). , but when I set up the "crypto map VPNL2L outside interface, it replaces the command', and so I can have only a single connection.
the executed show.
ASA1 (config) # sh run
: Saved
:
ASA Version 8.0 (2)
!
hostname ASA1
activate 7esAUjZmKQSFDCZX encrypted password
names of
!
interface Ethernet0/0
nameif inside
security-level 100
address 172.16.3.2 IP 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 200.20.20.1 255.255.255.0
!
interface Ethernet0/1.1
VLAN 1
nameif outside1
security-level 0
no ip address
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/5
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
object-group, net-LAN
object-network 172.16.0.0 255.255.255.0
object-network 172.16.1.0 255.255.255.0
object-network 172.16.2.0 255.255.255.0
object-network 172.16.3.0 255.255.255.0
object-group, NET / remote
object-network 172.16.100.0 255.255.255.0
object-network 172.16.101.0 255.255.255.0
object-network 172.16.102.0 255.255.255.0
object-network 172.16.103.0 255.255.255.0
object-group network net-poolvpn
object-network 192.168.11.0 255.255.255.0
access list outside nat extended permit ip net local group object all
access-list extended sheep allowed ip local object-group net object-group net / remote
access-list extended sheep allowed ip local object-group net net poolvpn object-group
access-list splittun-vpngroup1 extended permitted ip local object-group net net poolvpn object-group
pager lines 24
Within 1500 MTU
Outside 1500 MTU
outside1 MTU 1500
IP local pool ippool 192.168.11.1 - 192.168.11.100 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 100 burst-size 10
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 access list outside nat
Route outside 0.0.0.0 0.0.0.0 200.20.20.1 1
Route inside 172.16.0.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.1.0 255.255.255.0 172.16.3.2 1
Route inside 172.16.2.0 255.255.255.0 172.16.3.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
!
internal vpngroup1 group policy
attributes of the strategy of group vpngroup1
banner value +++ welcome to Cisco Systems 7.0. +++
value of 192.168.0.1 DNS server 192.168.1.1
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value splittun-vpngroup1
value by default-ad domain - domain.local
Split-dns value ad - domain.local
the address value ippool pools
username password asa1 VRTlLlJ48/PoDKjS encrypted privilege 15
tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared-key *.
type tunnel-group vpngroup1 remote access
tunnel-group vpngroup1 General-attributes
ippool address pool
Group Policy - by default-vpngroup1
vpngroup1 group of tunnel ipsec-attributes
pre-shared-key *.
context of prompt hostname
Cryptochecksum:00000000000000000000000000000000
: end
ASA2 (config) #sh run
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
VPNL2L interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400tunnel-group 200.30.30.1 type ipsec-l2l
IPSec-attributes tunnel-group 200.30.30.1
pre-shared key ciscomy topology:
I try with the following links, but did not work
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080912cfd.shtml
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml
Best regards...
"" I thing both the force of the SAA with the new road outside, why is that? ".
without the road ASA pushes traffic inward, by default.
In any case, this must have been a learning experience.
Hopefully, this has been no help.
Please rate, all the helful post.
Thank you
Rizwan Muhammed.
-
How many group Supportepar ASA 5520 vpn for remote access
Hello
Howmany vpn group is supported on asa 5520 with configuraion vpn remote access.
Concerning
1 if nat-control is disabled and you do not have any other order NAT in your config file, you do not have it. Try to remove the existing "NAT 0" command and "clear xlate."
2. you must ensure that your network inside know they can go by ASA to access remote vpn client IP. You have any device layer 3 behind the ASA that does the routing. If so, please verify that this is the routing table.
-
ASA 5520 8.0 (4) port depending on the ACLs vpn works not
Hi all
I have a problem with an ASA (5520 8.0 (4)) for lack of working with a port based acl for remote clients. I have a simple acl from a single line to split traffic, if I allowed the tunnel IP works fine, if I lock it up to TCP 3389 rdp will not work. I don't see anything in the logs and debug output, I did have a problem with a similar configuration (5510 8.0 (4) and I'm at a loss to explain it.)
Everyone knows about this problem before? I have nat exclusions etc and as I said, the tunnel only works if the acl permits all IP traffic between client and server.
THX in advance
Split-tunnel list cannot IP, if you want to restrict which ports are are sent via the tunnel vpn for your clients vpn, you need to use VPN filters under Group Policy:
-
SSL VPN using ASA 5520 mode cluster - several problems
I configured 2 ASA 5520 s in the load balancing cluster mode. I connect using anyconnect and I download the customer the first time and everything works well except outlook. I don't know why outlook does not work.
The second problem is after the anyconnect client is installed on your machine, he remembers that ASA (say ASA2) he first connected and the GUI shows the address IP of ASA2 instead of the virtual IP address of the cluster. I want users always connect using the virtual IP address.
The third problem I have is there is a default group of SSL VPN and I want all users to use this group. In the initial web page, there is a drop down menu which shows that this group, but I still want to disable this menu drop-down.
Any suggestions?
To disable the drop-down menu, you can turn it off with the command
WebVPN
no activation of tunnel-group-list
This will take care of your last issue.
***************************
You can create a profile of the Anyconnect client with the name of the server you want to connect with and that make the ASA that will solve your problem of virtual IP.
**************************
Regarding Outlook, do you use specific ports which allows inspection of the ASA. Take a look at the list of inspection on the SAA and perhaps try to disable inspection and see if it works.
*****************************
-
Using Cisco Client to site VPN on a behind a NAT ASA 5520
I apologize if this has been asked and we answered in the forums. I looked, and while I found a large number of entries that were dancing all around this question, I never found nothing which addressed this specific issue. We currently use an ASA 5520 as the head end of a relatively large customer to site IPSEC VPN (approximately 240 users, not consecutively). This ASA is currently sitting behind a Checkpoint firewall with a real publicly addressable IP address on its public interface. All of our customers use the legacy Cisco VPN (not the one anyconnect) client. We plan to a few controllers F5 link set up between ISPS and firewalls. For VPN connectivity F5 recommends that we NAT IP address (called a broad IP) to point back to a private IP address on the ASA and F5. My question is, will this work? I've always heard say that the head of line needed to have a public IP address on this subject because this is what will be placed in packages for the client to respond to.
For further information, here's what we have now and what we are invited to attend.
Current
ISP - router - firewall-fire - ASA (public IP address as endpoint)
Proposed
ISP - router - F5 (public IP address as endpoint using a NAT to ASA) - Firewall - ASA (10.X.X.X as its external interface)
Proposed alternative
ISP - router - F5 (public IP address as endpoint using a NAT to ASA) - ASA (10.X.X.X as its external interface)
All thoughts at this moment would be greatly appreciated. Thank you!
Hello
If there is a static NAT one by one on F5 to the external interface of the ASA, then I don't think they would be any problems.
Because when the client will attempt to connect to IKE to the translated public IP, F5 will redirect the request to ASA outside interface that is configured for the VPN.In addition, to ensure the udp500, 4500 and esp is allowed and then you should be good to go.
HTH
Concerning
Mohit -
ASA 5520 - SSL VPN (Anyconnect) licenses
Hello
Can someone clarify for me the SSL VPN/AnyConnect for the ASA 5520 license? Specifically, the differences between the AnyConnect Essentials and AnyConnect Premium. Our current license looks like this:
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 150
Internal hosts: unlimited
Failover: Active/active
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 2
GTP/GPRS: disabled
SSL VPN peers: 2
Total of the VPN peers: 750
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect Cisco VPN phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabledThis platform includes an ASA 5520 VPN Plus license.
I guess that means that we have just the 2 'free trial' SSL VPN licenses and nothing else.
I would like to add 25 or maybe 50 SSL VPN licenses and be able to use a combination of full free client, thin client and groups client AnyConnect. The 'ASA5500-SSL-25' (or 50) would be the correct license I need to buy?
Thank you
Rob
Hello
The essentials license is per device and does not allow full-tunnel.
If you need other features like Secure Desktop, without client SSL and other optional features such as shared licenses, you must go to the Premium license.
Federico.
-
ASA 5520 - VPN using LDAP access control
I'm setting up an ASA 5520 for VPN access. Authorization & authentication using an LDAP server. I have successfully configured tunnel, and I can access internal resources. What I want to do now is to limit access to a specific ad group membership. In the absence of this belonging to a group, a user cannot access the VPN.
My VPN client software testing is Cisco Systems VPN Client 5.0.05.0290 Version. The Group authentication is configured in a connection entry that identifies the Group of Tunnel. I think I wrote that correctly.
The Version of the software on the SAA is 8.3 (1).
My current challenge is getting the VPN to stop letting each request for access through little matter belonging to a group. I found the thread below to be significantly useful, but there is obviously something which is not entirely mesh with my situation.
https://supportforums.Cisco.com/message/3232649#3232649
Thanking all in advance for everything offered thoughts and advice.
Configuration (AAA LDAP, group policy and group of tunnel) is below.
AAA-Server LDAP protocol ldap
AAA-Server LDAP (inside) host x.x.y.12
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
microsoft server type
LDAP-attribute-map LDAP_MAP
AAA-Server LDAP (inside) host x.x.y.10
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
LDAP-attribute-map LDAP_MAP
AAA-Server LDAP (inside) host x.x.y.11
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
microsoft server type
LDAP-attribute-map LDAP_MAPAAA-Server LDAP (inside) host x.x.y.10
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
LDAP-attribute-map LDAP_MAP
AAA-Server LDAP (inside) host x.x.y.11
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
microsoft server type
LDAP-attribute-map LDAP_MAP
!
internal group NOACCESS strategy
NOACCESS group policy attributes
VPN - concurrent connections 0
Protocol-tunnel-VPN IPSec webvpn
address pools no
attributes of Group Policy DfltGrpPolicy
VPN - 10 concurrent connections
Protocol-tunnel-VPN IPSec webvpn
enable IPSec-udp
vpn group policy - pro internal
vpn - pro group policy attributes
value x.x.y.17 x.x.y.27 WINS server
Server DNS value x.x.y.19 x.x.y.29
VPN - 50 simultaneous connections
Protocol-tunnel-VPN IPSec svc
group-lock value vpn - pro
field default value domain.com
value of address ip-vpn-pro pools
WebVPN
client of dpd-interval SVC no
dpd-interval SVC 1800 bridge
!attributes global-tunnel-group DefaultRAGroup
LDAP authentication group-server
LDAP authorization-server-group
Group Policy - by default-vpn-pro
authorization required
type group tunnel vpn - pro remote access
attributes global-tunnel-group-vpn - pro
LDAP authentication group-server
Group-server-authentication (LDAP outside)
LDAP authorization-server-group
Group Policy - by default-vpn-pro
band-Kingdom
password-management
band-band
authorization required
type tunnel-group NOACCESSGROUP remote access
attributes global-tunnel-group NOACCESSGROUP
LDAP authentication group-server
NOACCESS by default-group-policyHello
The configuration of what you are looking for is a feature called DAP (Dynamic Access Policy)
The following link will explain how to set up the same.
http://www.ciscosystems.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml
I hope this helps.
Kind regards
Anisha
P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.
-
VPN site to Site with ASA 5520 * please help *.
I am using two ASA 5520, and try to put up a site to site VPN. This seems to be pretty simple, but I'm on my third day of train this is up and running. Both 5520's are running the latest 9.1 (5) IOS.
Please note: I replaced it with [#1-WAN IP] and [#2-WAN IP] for WAN IP of the ASA addresses.
Thanks in advance for any help you may have.
-------------------------------------------------------------------------------------------------------------------------------------------------
ASA 5520 # 1:
Crypto ikev1 allow outside
the local object of net network
10.0.0.0 subnet 255.255.255.0net remote object network
172.20.0.0 subnet 255.255.255.0outside_1_cryptomap list of allowed ip object local net net access / remote
tunnel-group [IP #2-WAN] type ipsec-l2l
IPSec-attributes tunnel-group [#2-WAN IP]
pre-shared-key cisco123IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
card crypto oustide_map 1 match address outside_1_cryptomap
card crypto oustide_map 1 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 1 set pfs Group1
map 1 set outside_map crypto peer [#2-WAN IP]
outside_map interface card crypto outsideNAT (inside, outside) 1 local static source net net-local destination static remote net net / remote
-------------------------------------------------------------------------------------------------------------------------------------------------
ASA 5520 #2:
Crypto ikev1 allow outside
the local object of net network
172.20.0.0 subnet 255.255.255.0net remote object network
10.0.0.0 subnet 255.255.255.0outside_1_cryptomap list of allowed ip object local net net access / remote
tunnel-group [#1-WAN IP] type ipsec-l2l
IPSec-attributes tunnel-group [#1-WAN IP]
pre-shared-key cisco123IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
card crypto oustide_map 1 match address outside_1_cryptomap
card crypto oustide_map 1 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 1 set pfs Group1
map 1 set outside_map crypto peer [#1-WAN IP]
outside_map interface card crypto outsideNAT (inside, outside) 1 local static source net net-local destination static remote net net / remote
Try to correct the mistakes in the two configs.
In some places, you have 'oustide_map' where you need "outside_map".
-
ASA 5520 Active standby and ssl vpn loadbalancing
I have a pair of Asa 5520 failover active rescue running. Can I use these two machines in a cluster of ssl vpn load balancing?
N ° when a couple active / standby is part of a cluster of VPN, the rescue unit is still pending - she will not be actively terminate user sessions. Only the active cluster members (and non-failover) will do.
Maybe you are looking for
-
Hi, I bought a pack of tricolor ink until I signed up for hpinstantink. How can I go on using this pack and not being charged by hpinstantink for printing? The place where I bought to refuse to refund as long as the expiration of the Pack is Oct 2015
-
Why all of a sudden I start my computer desk 2 times?
When I turn on my computer, it doesn't matter, I have to stop with the button 'walk', wait then push it again and it lights up as it should. This just started about 2 weeks ago. Once its sequel it works fine! But the thing 2 times it's embarrassing.
-
If anyone has this pc what kind of cards you have is successful by running in it?
-
Windows Update always running in background
Hi all I am running Vista and have reformatted and reinstalled three times in the last four or five months. Whenever I installed, the pc works fine for a while then after a windows update, I don't know which, I start getting a lot of substantive act
-
computer will not recognize vx 5000 webcam
After downloading the software, the computer does not recognize the lifecam vx 5000.