"Unable to detect the remote device" Bluetooth re Nokia phone

Similar Questions

• Satellite L50 - A - unable to detect the remote device on BT

  Hello

  I have a C50-A-1E9 Satellite, I bought with Windows 8.1 and it downgraded to Windows 7 change HARD for one SSD drive.

  Everything works fine except Bluetooth.
  I have an Atheros AR956x wireless network card.

  Already reinstalled battery bluetooth several times, also with the installation of Package before Bluetooth filter driver (here I do not know if the installation worked, because I do not receive a "Installation complete" message, but no error message no more).

  The Bluetooth Manager, and everything seems fine.
  Just that I can't find other devices when I try to add new connections (tried several of them - speakers bose, galaxy S2) and devices do not see my computer.

  It seems that my computer think Bluetooth works, but in fact it doesn't.

  You have ideas, what's not here? Thank you in advance!

  I don't have experience with this machine, but by the use of BT is important the BT module is successfully activated. To do this, as far as I know, you use the FN key combination.
  Issues related to the:
  You can use the FN keys in general?
  When you press the FN key you find at the top of your screen flash cards?
  You can use FN + F12 key combination?

• Imaging software unable to detect the scanning device

  I installed an Epson Perfection V700 Photo scanner as well Silverfast 8 SE who works with the scanner.  It used to work fine, but now when I start it, it says it cannot detect a scanner.  I uninstalled the scanner and Silverfast several times but the problem persists.  When I check device for devices showing Manager, there is no icon for the Scanner.  I consulted Silverfast support but so far nothing of their suggestions help.  It's as if the scanner is installed in a place that is not detected either by Silverfast or Device Manager.  The scanner works fine regardless.

  Hope you can help.

  Jim

  Hello Jim,

  I'm glad to know that you have addressed the issue.

  Your efforts to solve this problem is appreciated. We appreciate the time taken by you to share the resolution. I don't know that it would be beneficial to other members of the community as well.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• The remote device or resource does not accept the connection detected

  I have a computer that cannot connect to the internet. It is connected to a LAN line through a switch that has another computer on it. The other computer works fine. The computer in question says it is connected but when I try to open IE I get the unable to load the page.  Outlook also connects and the computer does not connect to our domain controller. When I run the windows diognostic, I get the error "the remote device or resource accepts the connection detected.  I was looking on the forums and tried everything I found. I have reset the settings of Internet Explorer and unchecked the proxy server box.  I tried to replace the switch and the CAT5, even if the other computer on the switch works fine, so it isn't a problem with the hardware. I'm out of ideas.

  The computer is running windows 7 and IE 9.

  Hello

  -Is your computer connected to the domain environment?
  -You are aware of any changes made on the computer before this problem?
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
   
  Hope this information helps.

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196

• Unable to connect the earpiece/headset Bluetooth

  Original title: Bluetooth device

  Hello

  I use a computer windows 7 dell laptop and having succumbed to my last 10 attempts to connect my sony with her bluetooth headset. Also, I went through all the links of responses provided by the site. I also downloaded the software device for her drive. The laptop also shows my SonyBTH under "Devices and Printers". But I'm still not able to connect my SonyBTH even after clicking on the indicated device.

  Please kindly help me with this problem.

  Anyone?

  Thank you

  Afonso Rajalim

  Hi Afonso,

  Thanks for posting your query in Microsoft Community.

  I understand that you are unable to connect SonyBTH to the Windows 7 machine and I appreciate the efforts made in the patches that you tried. Let me ask you;

  • Have you been able to connect to the same SonyBTH in the past?
  • Remember to no particular change in the computer before the show?
  • What security software is installed on the computer?
  • What is the model number of your Dell computer?

  There could be several reasons for this cause and diagnose the problem, we will try these steps and check.

  Step 1: Make sure that Windows is configured to accept incoming Bluetooth connections.

  You can check the compatible devices Bluetooth configuration panel. Here's how:

  1. Click the Start button, select Control Panel, click hardware and sound, and then click Bluetooth devices.
  2. Click the Options tab, select the allow the devices to connect to this computer check box, and then click OK.

  Step 2: Remove and then reinstall the device:

  1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  2 Select the device that is not working, and then click Remove.

  3. click on Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  5. follow the remaining instructions in the wizard.

  · Make sure that the device is on and that the batteries should be replaced.

  · Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  Solving problems with Bluetooth devices compatible (applicable to Windows 7 as well)

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• The remote device or resource does not accept the connection

  I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

  Hello Kyle,.

  Your computer is connected to a domain network?

  If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Otherwise, try to follow the following suggestions to solve the problem.

  "Internet Explorer cannot display the webpage" error

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also refer to:

  The remote device or resource does not accept the connection

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• the remote device or resource does not accept the connection - CIMC

  Hello

  I tried access MMIC remotely via web browser, but get the error message "the connection was refused by the target device.

  I was able to access a device similar to the same place but will not be for this particular device.

  Another diagnosis with internet explore came with reason "the remote device or resource does not accept the connection.

  Any idea please?

  Thank you

  Hi Mike,.

  Is the host this time online? Are you able to ping the server MMIC? If you are able to ping the server of CIMC, but unable to connect via SSH or the graphical user interface you can hit the following bug;

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCun88303/?reffering_site...

  I hope this helps. Please check all the useful answers as correct while others can find answers faster.

  Qiese Sa'di

• Kodak esp5250 printer 3520 error code unable to detect the edges of paper

  error code Kodak esp5250 printer 3520 unable to detect the edge of the paper?

  Please see

  http://support.en.kodak.co.uk/app/answers/detail/a_id/25352/kw/3520/selected/true .

• HP PhotoSmart C4450 All in One Printer is unable to detect the alignment (tried everything) page

  My question is very simple. I tried all the options I could think for my printer detect the alignment page and it is still unable to detect the page. Can someone who has had the same problem please send me a list of recommended procedures to solve the problem? I intend to go through one by one until it is resolved. The post that I found with this exact topic didn't have a sufficient response that other that the user placed a bunch of papers on the page alignment and the printer worked... Could really use some help, my patience is pretty much exhausted. I use a MAC Leopard operating system. Thank you.

  Hi drubio1989,

  What are the levels of ink in each cartridge?  I connected a troubleshooting document that addresses the lack of alignment.  Click here  You could take a look and perform one of the steps that you did not.  Let me know how it goes.

  Good luck!

• Vista to Windows 7 - no internet connection - "the remote device or resource accepts the connection.

  After the form of Vista to Windows 7, the office is connected to the network but cannot connect to the internet. All firewalls are disabled. The other pc on the network works well. I get the message "the remote device or resource accepts the connection.

  There's a way easier than Cody (do not hit you m8, but sometimes things can be simpler)

  Click on start/Control Panel/internet options/connections/LAN. Most likely your proxy is checked. Uncheck it and then reopen internet Explorer. Sounds like your proxy settings are on. I hope this helps.

• I can't update to of things - like iTunes, flashplayer or any error games resource or the remote device does not accept the connection

  Hi as I said in the title, whenever I have troubleshoot my connection says the remote device or resource does not accept the connection. I have a race a portable CAREB on windows 7. I can internet eyebrows and watch videos online and things like that, but I can't update things like iTunes, flashplayer or any what games that I run on my laptop. everytime I try I get a message of program control connection what ever I am updating. I checked the other computers in my house and they are all very well, as well as in home game consoles have no problem connecting to the internet and update. someone help me please

  Original title: Troubleshooting my my wireless conecction and it say the remote device or resource does not accept the connection

  Hello

  Thanks for posting in the Microsoft Community. This problem can occur because of incorrect settings of Internet Explorer. Initially, make sure you have Internet Explorer as web browser by default on the computer, refer to this link: http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

  Research I found that this problem can be solved by resetting the Internet Explorer settings. Try the following steps:

  1. Press the logo Windows + R to open the Run dialog box.

  2. Type inetcpl.cpl in the Run dialog box, press enter.

  3. Now click on the Advanced tab , and then click reset.

  4. Click apply , then ok.

   

  Note: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Please refer to this same thread http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connection-problem-troubleshooting-the-remote/24bfdbf3-4914-45a8-ae45-38243b59be1c?page=1, he is older but he helped a lot of users.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• IE9 "the remote device or resource does not accept the connection.

  IE9, "the remote device or resource does not accept the connection" appears when you try to open any website. My office to tell me that it is connected but cannot access any www. Meanwhile, my laptop connects fine. I have reset the settings in the internet options does not. I downloaded 'team' to connect (or similar) and asked for a connection and I thought that suspicious so uninstall this program... leaving me without access to the internet... * sigh * please can someone help me?

  Hello

  
  Method 1:
   
  Step 1:
   
  Run the network troubleshooter and see if that diagnoses the problem.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Step 2:
   
  Reference:
   
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  See also:
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
   
  Method 2:
   
  Temporarily disable antivirus programs and firewalls.

  Disable the anti-virus software

  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   
  Display the results.

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

  
  I'll try to install Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.

  I followed the steps described in Oracle Forms 11.1.2.0 on Win 7 64 - bit bit JVM error but still unable to solve my problem.

  Here are the details of the version of the installed JDK.

  C:\Program Files\Java\jdk1.6.0_45 > java-version

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  C:\Program Files\Java\jdk1.6.0_45 > % java_home Echo%
  C:\Program Files\Java\jdk1.6.0_45

  C:\Program Files\Java\jdk1.6.0_45 > echo %path%
  C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows; C:\Program Fi
  les\Java\jdk1.6.0_45\bin

  Installer: -.

  1 jdk-6u45-windows - x 64

  2 wls1036_generic.jar for 64-bit platform

  3 ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1

  Please advise. Thank you.

  I don't know if help.

  I have installed Oracle Forms 11 g on Windows Vista Home Edition (64-bit), had been an experience horrible (much testing), although eventually I got.

  If I'm not mistaken, I used this guide:

  Oracle WebLogic & Forms 11g Release 2 installation guide