ASA Headend ASA5505 end distance customer LAN VPN

Similar Questions

• VPN Remote LAN to LAN VPN issues

  The issue I'm having is that I have an ASA that provides Lan to Lan VPN and remote access VPN.  Lan to Lan VPN connects to another network where a remote server, and the remote vpn connects remote users to the LAN.  The two virtual private networks are currently working, however users remote connection via the remote access vpn can not connect to the server over the lan to lan vpn.  Here's our Installer.

  ASA - LAN to LAN VPN - ASA - LAN Local - Server

  |

  |

  Remote VPN access

  |

  |

  Remote users

  In this configuration remote users can access the local network, the server can access the local network, and the local network can access the server and remote users.  However, the server cannot access the remote users and remote users cannot access the server.  Any ideas on how to get this to work would be much appreciated.  I created the NAT rules I think were needed and added the necessary address so that the user remote vpn' client application lists the network on the otherside of the vpn as routable network LAN to LAN.  Also, I believe that all the rules of access are correct as tracers of package on both sides are successful.  However when you try to ping across the remote client on the server at the other end of the L2L it fails as other attempts to access the server like rdp.  Does anyone have a step by step on how to set up this type of vpn configuration remote and l2l configured on asa while leaving the two virtual private networks talk to each other.  By the way are two ASA 5505 that with two virtual private networks in this configuration is one on the other end of the l2l 7.2 and 8.2.  Any help would be appreciated, especially a tuturail or a list of commands needed to implement, because I think that I'm probably missing just a little extra configuration, I just can not understand.

  Use your favorite search engine "permit same-security-traffic intra-interface"

  Sent by Cisco Support technique iPad App

• VPN to access LAN VPN clinet.

  We use a PIX 515 as the hub of a LAN to LAN VPN as well as to access VPN Clinet. Using a multipoint configuration sites speaks (all PIX 501) are able to communicate with each other. However, the VPN to access the 515 client are not able to access the VPN sites has talked about. I think that it is due to the fact that put an end to all tunnels on the same interface of the PIX 515. Is there a way to allow the VPN CLient to communicate with the LAN VPN spoke?

  Concerning

  PD

  Currently, it is not a good way to meet the requirements above. However, add us a new item (or rather, a restriction of relax) for the PIX 7.0 code (to be released in December/January) to allow clients VPN packets 'u-turn' on a Hub PIX to PIX spoke connected via Lan-to-Lan tunnels. The program 7.0 beta is about to begin (may have just begun) so if interested, please contact your local account engineer Cisco. Sorry for the news but help is on the way.

  Scott

• How to set up a Lan to Lan VPN without using your external IP address?

  I have two 28 subnets A & B.

  My PIX and ASA outside interface addresses are both in A subnet.

  I am in the middle of a migration of the PIX to ASA and need to use the PIX outside of the address of the interface on the ASA for the last two remaining lan to lan VPN.

  I do like that because the sellers of these virtual private networks to connect to are huge dinosaurs IT and the aaages to get their sh * t tri... This means that I have to pass the IP address to my ASA, so I can't sentence have change for a new IP peer.

  I tried to figure out how to set a specific my counterpart VPN IP address but I can't figure out how...

  I even physically connected a second ethernet port and tried to give a similar IP in the same range, which it says it is not possible to have both outside the IP addresses on the same subnet.

  Hello

  It is not possible to have an IP address "secondary" on the physics/logic interface of a Cisco firewall.

  And as you've noticed, you cannot configure the same subnet on 2 different interface either.

  We are talking about such a large configuration that you want to just migrate from completely to the ASA PIX and make a switch during a maintenance window?

  Couldn't you just pass the ASAs 'outside' IP address address to that on the PIX and move the ASAs 'outside' of the PIX? Or not the ASAs "outside" IP address already some configured related to what makes this impossible?

  -Jouni

• Lan to lan VPN and VPNclient support at the same time?

  Hello I have a 2811 router.

  I put up as a VPN with Clients_vpn hub connect to it, and I used an IPSec on a stick configuration.

  At the same time, I would need to use the same Lan - to - Lan IPSec router to other different sites 2.

  I can't figure out how do it since I use already my 2811 as Concentrator VPN for Clients_vpn.

  Y at - it a trick?

  Thank you very much

  Riccardo

  Of course, here is an example of configuration of a router to be configured to stop static VPN LAN-to-LAN as customer VPN at the same time:

  http://www.Cisco.com/en/us/products/ps5855/products_configuration_example09186a00809c7171.shtml

  And another one for the router be configured to terminate dynamic LAN - to - LAN VPN as VPN Client:

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00801dddbb.shtml

  Another example of setting right on the LAN-to-LAN VPN between 2 routers:

  http://www.Cisco.com/en/us/products/HW/routers/ps221/products_configuration_example09186a008073e078.shtml

  Hope that helps.

• Cisco ASA 5500 Series end of life

  Hello

  I noticed that all 5500 series (5510,5520,5540,5550,5580) ASAs are all end-of-life announced in March 2013. However, I don't see ASA 5505 on the list. Can anyone confirm that 5505 EOL has not announced?

  http://www.Cisco.com/c/en/us/support/security/ASA-5505-Adaptive-Security...

  Thanks in advance

  The 5505 is not yet announced EOS/EOL, but the announcement can * t be extreme as 5506-X will be available soon (well, I hope... ;-)).

• Using configuration for the 2nd link of lan to lan vpn

  Hello

  Successfully, I configured a connection of lan to lan vpn between two offices. I try to add another link to a 3rd office to my office at home, but have some difficulty. I have attached my setup and hope someone can help me solve my problem. Right now I have a working vpn to the 172.16.0.0/24 network and putting in place the link to 172.16.3.0/24 so. For the new vpn connection, I can ping the external interfaces, but can't ping anything in-house.

  Thanks for your time and help,

  Jason

  Jason

  There is a major mistake that's easy to fix. You have successfully created a second instance of the encryption card to create a VPN tunnel for the second site. But as currently configured two instances of the encryption card use the same access list:

  1 ipsec-isakmp crypto map clientmap

  match address 100

  5 ipsec-isakmp crypto map clientmap

  match address 100

  But each session/tunnel VPN needs its own access list. So, I suggest that you make the following changes:

  5 ipsec-isakmp crypto map clientmap

  match address 101

  no access list 100

  access-list 100 permit ip 192.168.0.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 101 permit ip 192.168.0.0 0.0.0.255 172.16.3.0 0.0.0.255

  This provides a list of separate for each session/tunnel access and should solve this problem. Try it and tell us the result.

  HTH

  Rick

• ASA base S2S VPN, Tunnel establishes only when interesting traffic hits to end distance

  Dear all,

  I need your help to solve the problem mentioned below.

  VPN tunnel established between the unit two ASA.   A DEVICE and device B

  (1) if interesting traffic initiates a LAN device. traffic ACL hits. TUNEL is not coming

  (2) if interesting traffic initiates B LAN device. Tunnel will establish all the works of serivces

  (3) after the Tunnel device establishmnet B. We forced to tunnel down at both ends. Interesting again traffic initiates device a surpringly tunnel

  will go up.   After 2 or 3 days (after life expire 86400 seconds) initiated traffic of device A, tunnel will not esatblish.

  (it comes to rescue link: interesting won't be there all the time.)

  checked all parametrs, everthing seems fine. Here are the logs of attached but not more informative debugging on the balls. Please suggest.

  February 2, 2010 13:23:17: % ASA-7-713236: IP = 81.145.x.x, IKE_DECODE new SEND Message (msgid = 0) with payloads: HDR + HER (1), SELLER (13) + (0) NONE total length: 496

  February 2, 2010 13:23:18: % ASA-6-713219: IP = 81.x.x.x, KEY-ACQUIRE Queuing messages are treated when SA P1 is finished.

  February 2, 2010 13:23:18: % ASA-6-713219: IP = 81.x.x.x, KEY-ACQUIRE Queuing messages are treated when SA P1 is finished.

  February 2, 2010 13:23:23: % ASA-6-713219: IP = 81.x.x.x, KEY-ACQUIRE Queuing messages are treated when SA P1 is finished.

  February 2, 2010 13:23:25: % ASA-7-715065: IP = 81.x.x.x, history of mistake IKE MM Initiator WSF (struct & 0x1abb1e10) , : MM_DONE, EV_ERROR--> MM_WAIT_MSG2, EV_RETRY--> MM_WAIT_MSG2, EV_TIMEOUT--> MM_WAIT_MSG2 NullEvent--> MM_SND_MSG1, EV_SND_MSG--> MM_SND_MSG1, EV_START_TMR--> MM_SND_MSG1, EV_RESEND_MSG--> MM_WAIT_MSG2, EV_RETRY

  February 2, 2010 13:23:25: % ASA-7-713906: IP = 81.x.x.x, IKE SA MM:56f95c85 ending: flags 0 x 01000022, refcnt 0, tuncnt 0

  February 2, 2010 13:23:25: % ASA-7-713906: IP = 81.x.x.x, sending clear/delete with the message of reason

  February 2, 2010 13:23:25: % ASA-3-713902: IP = 81.x.x.x, counterpart of drop table counterpart, didn't match!

  February 2, 2010 13:23:25: % ASA-4-713903: IP = 81.x.x.x, error: cannot delete PeerTblEntry

  Hi, I have a similar problem a long time ago. You can choose which set up the tunnel in your crypto card:

  card crypto bidirectional IPsec_map 1 set-type of connection

  I hope that it might help to solve your problem. Kind regards.

• Error of customer Cisco VPN connection ASA 5505

  I am unable to connect to the vpn I created on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 is lower. Any help to solve this is appreciated.

  CISCO VPN CLIENT LOG

  Cisco Systems VPN Client Version 5.0.06.0160

  Copyright (C) 1998-2009 Cisco Systems, Inc.. All rights reserved.

  Customer type: Windows, Windows NT

  Running: 6.1.7600

  Config files directory: C:\Program Cisco Systems Client\

  1 09:34:23.030 13/04/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "71.xx.xx.253".

  4 09:34:23.061 13/04/11 Sev = Info/6 IKE/0x6300003B

  Attempts to establish a connection with 71.xx.xx.253.

  5 09:34:23.061 13/04/11 Sev = Info/4 IKE / 0 x 63000001

  From IKE Phase 1 negotiation

  6 09:34:23.077 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 71.xx.xx.253

  7 09:34:23.170 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  8 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">

  9 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer is a compatible peer Cisco-Unity

  10 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer supports XAUTH

  11 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer supports the DPD

  12 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer supports NAT - T

  13 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

  Peer supports fragmentation IKE payloads

  14 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000001

  IOS Vendor ID successful construction

  15 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) at 71.xx.xx.253

  16 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  17 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000083

  IKE port in use - Local Port = 0xEB07, Remote Port = 0 x 1194

  18 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000072

  Automatic NAT detection status:

  Remote endpoint is NOT behind a NAT device

  This effect is behind a NAT device

  19 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  20 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  21 09:34:23.186 13/04/11 Sev = Info/5 IKE/0x6300005E

  Customer address a request from firewall to hub

  22 09:34:23.186 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 71.xx.xx.253

  23 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  24 09:34:23.248 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  25 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 172.26.6.1

  26 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.0.0

  27 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 172.26.0.250

  28 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 172.26.0.251

  29 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000000

  30 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = TLCUSA

  31 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000

  32 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E

  MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (1) built by manufacturers on Wednesday 5 May 09 22:45

  33 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001

  34 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194

  35 09:34:23.248 13/04/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  36 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000056

  Received a request from key driver: local IP = 172.26.6.1, GW IP = 71.xx.xx.253, Remote IP = 0.0.0.0

  37 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SEND to > QM ISAKMP OAK * (HASH, SA, NO, ID, ID) to 71.xx.xx.253

  38 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  39 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

  40 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000045

  Answering MACHINE-LIFE notify has value of 86400 seconds

  41 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000047

  This AA is already living from 0 seconds, setting the expiration to 86400 seconds right now

  42 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  43 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">

  44 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO *(HASH, DEL) to 71.xx.xx.253

  45 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000049

  IPsec security association negotiation made scrapped, MsgID = 89EE7032

  46 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000017

  Marking of IKE SA delete (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED

  47 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = 71.xx.xx.253

  48 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000058

  Received an ISAKMP for a SA message no assets, I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8

  49 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">

  50 09:34:26.696 13/04/11 Sev = Info/4 IKE/0x6300004B

  IKE negotiation to throw HIS (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED

  51 09:34:26.696 13/04/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED".  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  52 09:34:26.696 13/04/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  53 09:34:26.696 13/04/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  54 09:34:26.696 13/04/11 Sev = Info/4 IKE / 0 x 63000001

  Signal received IKE to complete the VPN connection

  ----------------------------------------------------------------------------------------

  ASA 5505 CONFIG

  : Saved

  :

  ASA Version 8.2 (1)

  !

  ciscoasa hostname

  domain masociete.com

  activate tdkuTUSh53d2MT6B encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 172.26.0.252 255.255.0.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address 71.xx.xx.253 255.255.255.240

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  clock timezone IS - 5

  clock to summer time EDT recurring

  DNS server-group DefaultDNS

  domain masociete.com

  access-list LIMU_Split_Tunnel_List note the network of the company behind the ASA

  Standard access list LIMU_Split_Tunnel_List allow 172.26.0.0 255.255.0.0

  outside_access_in list extended access permit icmp any one

  outside_access_in list extended access udp allowed any any eq 4500

  outside_access_in list extended access udp allowed any any eq isakmp

  outside_access_in list extended access permit tcp any host 71.xx.xxx.251 eq ftp

  outside_access_in list extended access permit tcp any host 71.xx.xxx.244 eq 3389

  inside_outbound_nat0_acl list of allowed ip extended access all 172.26.5.192 255.255.255.240

  inside_outbound_nat0_acl list of allowed ip extended access all 172.26.6.0 255.255.255.128

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  local pool VPN_POOL 172.26.6.1 - 172.26.6.100 255.255.0.0 IP mask

  ICMP unreachable rate-limit 1 burst-size 1

  enable ASDM history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  NAT (inside) 1 0.0.0.0 0.0.0.0

  static (inside, outside) 71.xx.xxx.251 172.26.5.9 netmask 255.255.255.255

  static (inside, outside) 71.xx.xxx.244 172.26.0.136 netmask 255.255.255.255

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 71.xx.xxx.241 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  Enable http server

  http 172.26.0.0 255.255.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  !

  no basic threat threat detection

  no statistical access list - a threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of server WINS 172.26.0.250 172.26.0.251

  value of 172.26.0.250 DNS server 172.26.0.251

  Protocol-tunnel-VPN IPSec l2tp ipsec svc

  value by default-field TLCUSA

  internal LIMUVPNPOL1 group policy

  LIMUVPNPOL1 group policy attributes

  value of 172.26.0.250 DNS server 172.26.0.251

  VPN-idle-timeout 30

  Protocol-tunnel-VPN IPSec l2tp ipsec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list LIMU_Split_Tunnel_List

  the address value VPN_POOL pools

  internal TLCVPNGROUP group policy

  TLCVPNGROUP group policy attributes

  value of 172.26.0.250 DNS server 172.26.0.251

  Protocol-tunnel-VPN IPSec l2tp ipsec svc

  Re-xauth disable

  enable IPSec-udp

  value by default-field TLCUSA

  barry.julien YCkQv7rLwCSNRqra06 + QXg password user name is nt encrypted privilege 0

  username barry.julien attributes

  VPN-group-policy TLCVPNGROUP

  Protocol-tunnel-VPN IPSec l2tp ipsec

  bjulien bhKBinDUWhYqGbP4 encrypted password username

  username bjulien attributes

  VPN-group-policy TLCVPNGROUP

  attributes global-tunnel-group DefaultRAGroup

  address VPN_POOL pool

  Group Policy - by default-DefaultRAGroup

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared-key *.

  tunnel-group DefaultRAGroup ppp-attributes

  no authentication ms-chap-v1

  ms-chap-v2 authentication

  type tunnel-group TLCVPNGROUP remote access

  attributes global-tunnel-group TLCVPNGROUP

  address VPN_POOL pool

  Group Policy - by default-TLCVPNGROUP

  IPSec-attributes tunnel-group TLCVPNGROUP

  pre-shared-key *.

  ISAKMP ikev1-user authentication no

  tunnel-group TLCVPNGROUP ppp-attributes

  PAP Authentication

  ms-chap-v2 authentication

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum:b94898c163c59cee6c143943ba87e8a4

  : end

  enable ASDM history

  can you try to change the transformation of dynamic value ESP-3DES-SHA map.

  for example

  remove the encryption scheme dynamic-map outside_dyn_map 20 transform-set TRANS_ESP_3DES_MD5

  and replace with

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

• LAN to lan vpn between ASA and router 7200

  Hi friends,

  I need to configure the lan to lan between ASA vpn (remote location) and router 7200 (on our network).

  <7200 router="" (ip="" add:="" 10.10.5.2)="">-(Internet) -<(IP add:="" 192.168.12.2)="" asa(5510)="">---192.135.5.0/24 network

  I will have the following configuration:

  7200 router:

  crypto ISAKMP policy 80

  the enc

  AUTH pre-shared

  Group 1

  life 3600

  ISAKMP crypto key cisco123 address 192.168.12.2

  Cryto ipsec transform-set esp - esp-md5-hmac VPNtrans

  map VPNTunnel 80 ipsec-isakmp crypto

  defined by peer 192.168.12.2

  game of transformation-VPNtrans

  match address 110

  int fa0/0

  IP add 10.10.5.2 255.255.255.192

  IP virtual-reassembly

  no ip route cache

  Speed 100

  full duplex

  card crypto VPNTunnel

  access-list 110 permit ip any 192.135.5.0 0.0.0.255

  ASA:

  int e0/0

  nameif inside

  security-level 100

  192.135.5.254 Add IP 255.255.255.0

  int e0/1

  nameif outside

  security-level 0

  IP add 192.168.12.2 255.255.255.240

  access-list ACL extended ip 192.135.5.0 allow 255.255.255.0 any

  Route outside 0.0.0.0 0.0.0.0.0 192.168.12.3 1

  "pre-shared key auth" ISAKMP policy 10

  ISAKMP policy 10-enc

  ISAKMP policy 10 md5 hash

  10 1 ISAKMP policy group

  ISAKMP duration strategy of life 10-3600

  Crypto ipsec transform-set esp - esp-md5-hmac VPNtran

  card crypto VPN 10 matches the ACL address

  card crypto VPN 10 set peer 10.10.5.2

  card crypto VPN 10 the transform-set VPNtran value

  tunnel-group 10.10.5.2 type ipsec-l2l

  IPSec-attributes of type tunnel-group 10.10.5.2

  cisco123 pre-shared key

  card crypto VPN outside interface

  ISAKMP allows outside

  dhcpd address 192.135.5.1 - 192.135.5.250 inside

  dhcpd dns 172.15.4.5 172.15.4.6

  dhcpd wins 172.15.76.5 172.15.74.5

  dhcpd lease 14400

  dhcpd ping_timeout 500

  dhcpd allow inside

  Please check the configuration, please correct me if I missed something. I'm in a critical situation at the moment...

  Please advise...

  Thank you very much...

  Where it fails at the present time?

  Can you share out of after trying to establish the VPN tunnel:

  See the isa scream his

  See the ipsec scream his

  Please also run the following debug to see where it is a failure:

  debugging cry isa

  debugging ipsec cry

• ASA 5500 series as a customer VPN SSL

  Hello.

  ASA 5510 (or other products) usable as SSL VPN site to site VPN client?

  Version 8.4.2 asdm 6.4.9

  On the other end have certificate authentication and authorization through LDAP credentials

  SSL on the SAA isn't only for remote access. For the Site to Site, you must use IPSec.

• LAN to Lan VPN on ASA - than a single public address...

  Hello, I need to find a way to work around this problem.

  We have an ASA 5510 8.3, we need to use to terminate a VPN IPSEC in LAN to LAN running.

  Problem is that we have only a single public address available for having set up the link between the ASA and the Internet router on private addresses.

  Is it possible to NAT the public facing the inside or to the outside interface of the ASA and terminate the VPN on this interface?

  If this isn't the case, I have other options?

  Thanks in advance!

  Rob

  No, you can't NAT, the IP address of the ASA on the SAA itself, which is not supported.

  You can also terminate the VPN tunnel through the interface on the ASA.

  How and where you currently do NAT for internet access? You cannot configure NAT on the same device where you are currently configuring your NAT?

• Duplicate remote Lan VPN subnets

  Hello Experts,

  I have 2 lans DISTANCE double connection via VPN with the ip address of 192.168.70.X and 192.168.70.x

  We are already working, but I don't know how to add the second that is listed

  exactly the same thing. Not clear how to apply the NAT on my Local router for the second subnet duplicate.

  I found this article but he speaks of lans in double on both sides, and it does NOT

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800b07ed.shtml

  Is there something similar, but with 2 LAN REMOTE subnets?

  Thank you

  Randall

  Hi, Randall

  As far as I know, you will have to do it on the remote end. The problem is that if you have the same address for example 192.168.1.70 arriving from two sites on the same time on your side VPN device will get very confused as to where the return traffic should pass.

  You can NAT IP source on your local router to a set of addresses 192.168.70.x addresses, but I still think that the VPN device would not be able to determine what tunnel to send traffic down on the way back.

  I appreciate it is not always easy to get the 3rd party to do something, but I think that that's your only choice.

  HTH

  Jon

• Router Cisco ASA or IOS may be a SSL VPN clinet?

  I would like to know if the router Cisco ASA or IOS may be a customer of SSL VPN? Thank you.

  I'm glad to hear that.

  Indeed the ASA5505 and Cisco routers can be EzVPN customers.

  Please mark this question as answered if you have any other questions.

  Let me know.

  The rate of any position that you be useful.

• Customer global VPN will not connect on the first attempt

  Global VPN Client version 4.9.4.0306.

  I connect to a variety of virtual private networks for clients whom I manage IT systems. When I connect to their virtual private networks via devices Sonicwall TZ in my home office, the first always uptight attempt connection, implementation service or Authenticating or IP acquisition. So I click on turn off, then immediately, click Activate, and it ends. This happens every time that I log in unless I log in no time (maybe a few minutes) after I close an open connection.

  I thought that it would be fair to my laptop; However, it has persisted through two or three versions of the GVPN customer and, more important still, this does not happen when I have my laptop in the office of a client with me - that from my desktop at home.

  So I already know that there must be something on my frontier DSL modem or a service. But it's not as if the customer VPN tells me "your modem has decided to abandon the Sonicwall response during authentication" or something like that.

  Are there measures of troubleshooting/diagnosis/tests of base I can try, or any configuration of particular gateway that could be suspicious. In my case, the gateway is my modem Frontier.

  Yes, it's a little different.

  Thank you for your participation!

  Chris