Clientless VPN SSL - policy of another LDAP authentication group

Similar Questions

• Clientless VPN SSL - based credentials for different networks?

  Hi guys,.

  I want to be able to display different cifs: / / and unc paths based on the user who connects to the portal of the SSL.

  Could someone help me on how this can be done? I couldn't find that it documented somewhere... Maybe I'm just blind.

  any help is appreciated.

  Thank you very much.

  Oh, OK.  It is not difficult.  I don't have any document or anything, but assuming that you already have your separate groups already set up, here's what you have to do (in ASDM):

  1. Access Configuration--> Device Management--> users / AAA--> user accounts
  2. Select the user name that you want to assign a group policy
  3. Click on 'change '.
  4. In the pop-up window, click VPN policy from the menu on the left
  5. Your first option right must be group policy
  6. Uncheck "Inherit" and assign a group policy
  7. Click on 'OK '.
  8. Click 'apply '.

  Repeat this step for each user name.  That should do it.  I would like to know if that's what you're looking for.

  Please evaluate the useful messages.

• Clientless VPN SSL certificate

  Hello

  Is a certificate must be installed on the client in a SSL VPN configuration without client for HTTPS traffic.

  Thank you.

  NO - do not mandatory, only cert that is used is the end of SSL VPN. The user must accept it if it's a self-signed certificate (this is normal), or if the cert was signed by the normal authorities - the user will never see the cert.

  HTH

• Another failure of the LDAP authentication

  I'm trying to setup LDAP authentication for my ASA, as well as the AD Agent.  Currently my authentication fails with the following debug output...

  [- 2147483610] Starting a session

  [- 2147483610] New Session request, the 0xcc854d8c, reqType = authentication context

  [- 2147483610] Fiber has started

  [- 2147483610] Create LDAP context with uri = ldap://10.11.1.15:389

  [- 2147483610] Connect to the LDAP server:

  LDAP://10.11.1.15:389

  status = success

  supportedLDAPVersion [-2147483610]: value = 3

  supportedLDAPVersion [-2147483610]: value = 2

  [- 2147483610] Liaison as a Sargent\

  [- 2147483610] Authentication Simple for Sargent\ to 10.11.1.15

  [- 2147483610] LDAP search:

  Base DN = [DC = City, DC = charlottesville, DC = org]

  Filter = [sAMAccount = sargentm]

  Range = [subtree]

  [- 2147483610] The analysis of returned search results State failure

  [- 2147483610] Fiber output Tx = 308 bytes Rx = 677 bytes, status =-1

  [- 2147483610] End of the session

  ERROR: Authentication rejected: not specified

  I can however run successful AD etc., queries using the following commands.

  show the identity of the user ad-users city.charlottesville.org filter sargentm

  Ideas?

  Replace the below listed command within the parameters of the server:

  sAMAccount name-attribute LDAP

  With

  LDAP-naming-attribute sAMAccountName

  Note: the sAMAccountName is configured correctly.

  Jatin kone

  -Does the rate of useful messages-

• LDAP authentication problems

  Hello

  I am able to get the LDAP authentication works for the VPN, but when I go to test a user that is not defined in the VPN group in the ad, they are still able to authenticate and access to the VPN. I'm at a loss for what is the real problem, because everything seems to be set correctly.

  I joined newspapers in debugging ldap for a user that works properly and that a user that does not work properly. I think that they should be able to authenticate to a group JOB_ADMINS_VPN and if they are not in this group then they should be denied rights of VPN connection.

  LDAP attribute-map JOB_ADMIN_MAP

  name of the memberOf Group Policy map

  map-value memberOf CN = JOB_ADMINS_VPN, OU = VPN, DC = test, dc = net JOB_ADMINS

  AAA-server JOB_ADMINS protocol ldap

  AAA-server JOB_ADMINS (Prod) 10.5.1.11

  LDAP-base-dn DC = test, DC = net

  OR LDAP-group-base dn = VPN, DC = test, DC = net

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  LDAP-login-password *.

  LDAP-connection-dn CN = saVPNLDAP, CN = Users, DC = test, DC = net

  microsoft server type

  LDAP-attribute-map JOB_ADMIN_MAP

  I don't know miss me something small, but I don't know what I'm missing. Any contributions to this number will be grately apperciated.

  Thank you!

  Please review the below listed config and see what hand you lack of other "sh run" of the SAA.

  Configuration to limit access to a particular group of windows on AD

  internal group noaccess strategy

  attributes of the strategy group noaccess

  VPN - connections 1

  address pools no

  LDAP LDAP of attribute-map-MAP

  name of the memberOf IETF-Radius-class card

  map-value memberOf

  AAA-Server LDAP-AD ldap Protocol

  AAA-Server LDAP-AD

  Server-port 389

  LDAP-base-dn

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  LDAP-connection-dn

  LDAP-login-password

  microsoft server type

  LDAP-attribute-map LDAP-map

  Group Policy internal

  attributes of group policy

  VPN - connections 3

  Protocol-tunnel-VPN IPSec l2tp ipsec...

  value of address pools

  .....

  .....

  type of tunnel-group-remote access

  global-tunnel-group attributes

  Group-AD-LDAP authentication server

  NoAccess by default-group-policy

  !

  !

  attributes of the strategy group noaccess

  VPN - concurrent connections 0

  Jatin kone

  -Does the rate of useful messages-

• Vs ASA VPN SSL IPSEC

  Hello all -

  I'm working on an ASA 5510, running version 8.4. I'm looking for something that I imagine would be simple, but having a few problems.

  I am configuring the connection profile for the client and clientless VPN on the SAA. I would like the profiles of customer (who will serve with anyconnect by our internal staff) to have the possibility to select the profile to login on the login page. I have create a subnet by using policies and business unit to restrict access to various servers. This option button is displayed on the page of remote vpn in the ASDM, I select it and problem solved, they see a drop-down menu when using the anyconnect client, select one and the appropriate IP pool is assigned.

  Now, when I am configuring profiles without client (to be used by our external business clients), I don't want that they have the ability to choose a profile. At least not the ability to see all of the internal profiles, I created for our internal employees. It is displayed by selecting this option in the "client access", it also allows her to "client access". What Miss me in how I can prevent our external collaborators via SSL, see the profiles that I created for our internal employees via the drop-down list? As I hinted above, I use the ASDM.

  Any help would be appreciated-

  Brian

  Hello

  Unfortunately this is not possible because when you enable the option for users to select the connection profile, it will be available for all connections. If this is not enabled the default policy will be selected so it is a must to have chosen option.
  What you can do is to create a group URL and maps it to a specific connection profile, so when users type in the full URL for example https://my domain.com / external it will take the user directly on the specific connection profile.

  The size to the bottom of this configuration is that if someone types in the URL without the group URL it is taken to the default profile and can see the drop-down list with all connection profiles.

  Sent by Cisco Support technique iPad App

• AnyConnect VPN SSL

  My org is currently in the middle to pass to a ssl vpn ipsec VPN.

  I have setup where users can use the anyconnect client for VPN access and they can access internal servers or address, but are not able to access the internet.

  What be the best solution toa would apply to get the fucntion of users to access external Web sites.

  mask 4 .xx 255.255.255.0 IP local pool SSL 10.x.x4.xx - 10.x.x

  Line 409: pool ip SSL

  10.x.X4.XX - 10.x.x 4 .xx mask 255.255.255.0

  Line 844: ssl trust-point ASDM_TrustPoint0 on the inside

  Line 845: ssl trust-point ASDM_TrustPoint0 outside

  : 860 vpn-tunnel-Protocol ssl-client online - clientless ssl

  : 860 vpn-tunnel-Protocol ssl-client online - clientless ssl

  Line 863: anyconnect ssl deflate compression

  874 online: client vpn-tunnel-Protocol ssl-ssl-clientless ikev1

  874 online: client vpn-tunnel-Protocol ssl-ssl-clientless ikev1

  Line 917: client ssl vpn-tunnel-Protocol ikev1

  Line 1072: SSL address pool

  Line 1076: group policy - by default-SSL_VPN

  Line 1077: SSLVPN webvpn-attributes tunnel-group

  Line 1079: allow group-alias SSLVPN

  Hello

  have you also tried split tunneling?

  A sample:

  standard of tunnel access ASA5505 (config) # permit 192.168.1.0 list splitting 255.255.255.0

  attributes of SSLClientPolicy strategy group ASA5505 (config) #.

  split-tunnel-policy tunnelspecified ASA5505(config-Group-Policy) #.

  ASA5505(config-Group-Policy) # split - tunnel - network - list value split tunnel

  ASA5505(config-Group-Policy) # webvpn

  ASA5505(config-Group-WebVPN) # svc ask flawless svc

  ASA5505(config-Group-WebVPN) # svc Dungeon-Installer installed

  ASA5505(config-Group-WebVPN) # time generate a new key 30 svc

  ASA5505(config-Group-WebVPN) # svc generate a new method ssl key

  BR

  Hans-Jürgen Guenter

• AnyConnect user using the user certificate authentication and LDAP authentication

  Hello

  I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.

  Any help please.

  Hi subhasisdutta,

  This link will certainly help you with the configuration:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Hope this info helps!

  Note If you help!

  -JP-

• LDAP authentication on vty router login

  I'm trying to deploy authentication ldap (AD MS) for a connection vty router. I used the manual like this - http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_ldap/configuration/15-2mt/sec_conf_ldap.html

  But my scenario was unlucky

  My config is...

  _____

  AAA new-model

  !

  !

  AAA server ldap ad1 group

  test server

  !

  AAA authentication login default group local ad1

  AAA authorization exec default authenticated if

  !

  jump...

  !

  map1 LDAP attribute-map

  user name of card type sAMAccountName

  !

  test LDAP server

  IPv4 172.16.107.145

  attribute map map1

  Retransmission Timeout 20

  bind authenticates root-dn CN = Administrator, CN = users, DC = fabrikam, dc = com password 7 02050D 480809

  base-dn CN = users, DC = fabrikam, dc = com

  _____

  instead of "ldap attribute-map map1" I tried to use "search user-object-type-filter name. No effect

  I used wireshark for sniffer of cisco to AD packages. No package at the port of AD (389 or 3268) have been captured.

  I used the ldap debugging all the

  This is the output

  * Jun 9 19:38:45.414: LDAP: LDAP: AAA Queuing 117 of treatment application

  * Jun 9 19:38:45.414: LDAP: received the queue event, new demand for AAA

  * Jun 9 19:38:45.414: LDAP: LDAP authentication request

  * Jun 9 19:38:45.414: LDAP: no attributes to check username mental health

  * Jun 9 19:38:45.414: LDAP: name of user/password validation test failed!

  * Jun 9 19:38:45.414: LDAP: LDAP not suport interactive logon

  Note the last string. Is that what it means I can't use ldap for this?

  What I've done wrong?

  I am grateful for!

  LDAP on IOS support is limited to the VPN authentication and unfortunately cannot be used for authentication of the Admin (exec).

  CSCug65194    Document nonsupport LDAP for authentication of connection

  AAA does not support using a LDAP method for interactive logon authentication. Customers can configure 'aaa authentication login default group ldap', but when an interactive session (Terminal) attempts to authenticate via the LDAP protocol, the

  following message is syslogged:

  "LDAP: LDAP does not support interactive logon [sic]."

  This is due to the aaa/ldap/src/ldap_main.c of next record ldap_authen_req():

  If (intf & intf-> ATS) {}

  LDAP_EVENT ("LDAP don't suport interactive logon");

  ldap_method_failover (proto_req);

  Jatin kone
  -Does the rate of useful messages-

• ASA AnyConnect VPN SSL

  I have already set up site to site vpn asa.

  Now, I want to create asa ssl AnyConnectVPN.

  Please help me with the configuration for all VPN connection?

  Configuration VPN SSL Clienless already on our asa

  "If I try to access to, the error is.

  Opening of session

  Connection refused. Your environment does not respect the terms of access defined by your administrator.

  Please notify this error for me. I changed the username and password may also.

  Thank you

  Aung

  Hey Aung,

  It's the best way to get rid of this message:

  WebVPN

  No csd enabled

  !

  dynamic-access-policy-registration DfltAccessPolicy

  action continue

  The reason why you see the message is because you have a dynamic access policy refuse your connection, because your system does not meet the requirements.

  HTH.

  Portu.

• ASA to Juniper VPN with policy NAT

  I'm trying to configure a VPN tunnel between a remote site 66.18.106.160/27 and my network 192.168.190.0/24 client.  I need NAT all traffic leaving 192.168.190.0/24 to 192.168.191.0/24.

  Here is my current config:

  xxxxx host name

  domain xxxxx.local
  enable the encrypted password xxxxx
  XXXXX encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.190.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 207.98.218.26 255.255.255.248
  !
  interface Vlan3
  prior to interface Vlan1
  nameif DMZ
  security-level 50
  IP 192.168.100.1 address 255.255.255.0
  !
  interface Vlan12
  description of interface vlan2 backup
  nameif CharterBackup
  security-level 0
  IP 72.14.9.50 255.255.255.248
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  switchport access vlan 12
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  switchport access vlan 3
  !
  interface Ethernet0/7
  switchport access vlan 3
  !
  passive FTP mode
  DNS server-group DefaultDNS
  domain xxxxx.local
  access-list extended 110 permit ip 192.168.190.0 255.255.255.0 192.168.10.0 255.255.255.0
  access-list extended 110 permit ip 192.168.190.0 255.255.255.0 66.18.106.160 255.255.255.224
  access-list extended 110 permit ip 192.168.191.0 255.255.255.0 66.18.106.160 255.255.255.224
  access-list extended 100 permit tcp any host 207.98.218.27 eq 3389
  access-list extended 100 permit tcp any host 207.98.218.28 eq 3389
  access-list extended 100 permit tcp any host 207.98.218.27 eq 9000
  access-list extended 100 permit tcp any host 207.98.218.27 eq 9001
  access-list extended 100 permit tcp any host 207.98.218.28 eq 9000
  access-list extended 100 permit tcp any host 207.98.218.28 eq 9001
  access-list standard split allow 192.168.190.0 255.255.255.0
  Access extensive list ip 192.168.190.0 POLICYNAT allow 255.255.255.0 66.18.106.160 255.255.255.224
  extended VPN ip 192.168.191.0 access list allow 255.255.255.0 66.18.106.160 255.255.255.224
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  MTU 1500 DMZ
  MTU 1500 CharterBackup
  IP local pool vpnpool 192.168.10.75 - 192.168.10.85
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 524.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  Global interface (CharterBackup) 1
  NAT (inside) - 0 110 access list
  NAT (inside) 1 0.0.0.0 0.0.0.0
  NAT (DMZ) 1 0.0.0.0 0.0.0.0
  public static 192.168.191.0 (inside, outside) - POLICYNAT access list
  Access-group 100 in external interface
  Route outside 0.0.0.0 0.0.0.0 207.98.218.25 1 track 1
  Route 0.0.0.0 CharterBackup 0.0.0.0 71.14.9.49 254
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  Enable http server
  http 192.168.190.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  monitor SLA 123
  type echo protocol ipIcmpEcho 4.2.2.2 outside interface
  timeout of 1000
  frequency 3
  Annex ALS life monitor 123 to always start-time now
  Crypto ipsec transform-set esp - esp-md5-hmac romanset
  Crypto ipsec transform-set esp-aes - AES-128-SHA esp-sha-hmac
  Crypto-map dynamic dynmap 10 transform-set romanset
  romanmap card crypto 10 corresponds to the VPN address
  peer set card crypto romanmap 10 66.18.99.68
  card crypto romanmap 10 game of transformation-AES-128-SHA
  map romanmap 65535-isakmp ipsec crypto dynamic dynmap
  romanmap interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  the Encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  !
  track 1 rtr 123 accessibility
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH 0.0.0.0 0.0.0.0 CharterBackup
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd dns 8.8.8.8
  dhcpd outside auto_config
  !
  dhcpd address 192.168.100.100 - DMZ 192.168.100.130
  dhcpd enable DMZ
  !

  internal group xxxxx policy
  attributes of the strategy group xxxxx
  value of server WINS 192.168.190.3
  value of server DNS 192.168.190.3
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split
  tunnel-group xxxxx type ipsec-ra
  tunnel-group xxxxx General attributes
  address vpnpool pool
  Group Policy - by default-romangroup
  tunnel-group ipsec-attributes xxxxx
  pre-shared-key *.
  ISAKMP ikev1-user authentication no
  tunnel-group 66.18.99.68 type ipsec-l2l
  IPSec-attributes tunnel-group 66.18.99.68
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname

  Currently, traffic that originates on 192.168.190.0/24 generates no traffic phase 1.  However, if the traffic is coming in FRO the side remote (66.18.106.160/27) the tunnel arrives, but no traffic passes.

  Although this isn't my area of expertise, it seems to me that my ASA is not 'see' interesting traffic from 192.168.190.0/24 will 66.18.106.160/27.

  Any help you could provide would be GREATLY appreciated.

  Just remove the 2 following lines:

  access-list extended 110 permit ip 192.168.190.0 255.255.255.0 66.18.106.160 255.255.255.224

  access-list extended 110 permit ip 192.168.191.0 255.255.255.0 66.18.106.160 255.255.255.224

  Then 'clear xlate '.

  That should solve your problem.

• vCenter 5.5 and LDAP authentication

  Hello

  I'm new on using vCenter and had a quick question about LDAP authentication.  I installed vCenter as a device on my ESXI server and it seems to work fine, but when I connect the web client to vCenter I have no single sign on options to enable LDAP authentication

  So I did some research and a few posts mentioned that I had to enable SINGLE sign-on, so I have it configured as embedded will be fine then another message mentioned that I needed set up AD authentication on the vCenter server and ensure that the host to vcenter name was in the area...

  So I want to only LDAP authentication, I don't want to join my VMs to the domain.  So am I missing something?

  Thank you

  To be able to configure SSO, connect on the Web Client using the [email protected] account. With this account, you will be able to add your AD/LDAP as an identity Source and configure the permissions on the objects of the vCenter Server inventory...

  André

• LDAP authentication TWICE - authentication by default custom and Oracle?

  Hi all
  
  I have create an application with 2 pages (including the login page). My login page customized (for example...) 101) uses the authentication scheme that is customized with LDAP authentication.
  
  My question is...
  When I put in my URL of the login page in IE. Apex always redirect me to another page of connection (it looks like the default Oracle login page). The URL is http://xxxx.com/pls/apex_dev/wwww_flow_custom_auth_std.login_page?...
  
  After I entered the username and password, it transfers me to my custom login page. Again, I have to enter the same username and password... Can someone tell me how can I remove/disable the default Oracle login page? Because I don't want to authenticate LDAP in TWICE. I'm really grateful if anyone can guide me how to turn off in detail.
  
  
  Thank you mnay

  The Sessison. not valid Page in the authentication scheme must be set to 101 (from the selection list). Is it? There should be nothing in the invalid Session of URL attribute.

  Scott

• El Capitan LDAP authentication

  I am trying to setup on El Capitan Macbook LDAP authentication. I've prepared OpenLDAP server on the Linux host with the necessary users. This LDAP was added in the directory as LDAPv3 with set of mappings of RFC2307 utility.

  Computer can connect to LDAP, because green circle seen in there:

  Users and groups > connection options > network server account > hostname of the LDAP server

  The problem is that the user is unable to connect by using LDAP. No matter what I go to the login prompt (including complete DN), I can see say journal entry:

  SecurityAgent: Unknown user 'adrian' connection attempt SPENT for the audit.

  How can I review more about connection?

  So that the own Apple Open Directory is based on OpenLDAP, it is not the same. Not only do you have conveniently add additional entries to OpenLDAP i.e. Apple own LDAP schema, but you also need to configure Kerberos on the Linux server as well as Open Directory uses a combination of LDAP and Kerberos for authentication.

  In my view, it is possible to do all the extra steps to get a Linux server to fully act as the equivalent of an Open Directory server, but that you're barely at half way.

  See - http://deepport.net/archives/setting-up-a-linux-server-for-os-x-clients/

  and - http://www.torriefamily.org/~torriem/wiki/computer_stuff:opendir_and_ldap

  These articles do not cover Kerberos, but perhaps of additional useful information for the previous link.

  See - http://blog.michael.kuron-germany.de/2009/04/building-your-own-opendirectory-ser ver-on-linux /

  and - http://cs.unk.edu/~zhengaw/projects/openldap-server/

• setting up a vpn ssl to a netgear router

  I have setup a router netgear FVS336G at a customer and you have configured a vpn ssl to the customer. I can cinnect on a win xp machine, but not on my machine which is running Vista 64 bit. I get narrations of error message cannot install the vpn tunnel.

  Hi Jluequi,

  The issue of Windows 7 you have posted is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.