ASA5505 license?

Similar Questions

• WebVPN more ipsec ASA5505

  Hi all

  I have 2 active ipsec on ASA5505 (license secplus) tunnel.

  I would like to activate sslvpn also. Is it possible or there are issues to keep both services?

  Thank you

  Yes, you can run the IPSec and SSL VPN tunnels both at the same time.

  For SSL VPN, it comes with the license by default 2, which means that you can have 2 simultaneous SSL VPN tunnels.

  If you need more, you must purchase the license AnyConnect.

• Questions about licenses ASA5505

  Hello

  I searched in the ASA 5505 Hardware packages and I learned that there is the following text:

  -The base license, offering only 3 VLAN (3rd one limited). It also offers licenses for only 2 10 IPSec VPN and SSL VPN AnyConnect Premium (which includes the old Cisco VPN Client and EasyConnect connection), representing the two up to 10 VPN.  There are 3 types of packages, whose numbers are:

  * ASA5505-BUN - K9--> which is the basic package, offering up to 10 concurrent users internal

  * ASA5505-50-BUN - K9--> with up to 50 simultaneous users internal

  * ASA5505-UL-BUN - K9--> offering unlimited number of users at the same time internal

  -The license more than security, offering up to 20 VLAN and unlimited number of users simultaneous internal (regarding edition hardware Bundle). It also offers licenses for only 2 25 IPSec VPN and SSL VPN AnyConnect Premium (which includes the old Cisco VPN Client and EasyConnect connection), representing the two up to 25 VPNs. There is that one type of beam, whose part number is:

  * ASA5505-SEC-BUN - K9--> offering unlimited number of users at the same time internal.

  If you have the base base ASA5505-BUN-K9 license and want to upgrade to the license more than security, you would activate 2 licenses:

  + the license more security--> ASA5505-SEC-PL = (or the L-ASA5505-SEC-PL = if you wish to receive by e-mail)

  + unlimited users license--> ASA5505-SW-10-UL (as if the license more security is not hardware-Bundle, it does not come with unlimited number of users)

  and that is why it is better to buy the security more license material-Bundle from the outset that the upgrade later.

  It comes as I could get, but I have a few questions that I would like you to help me solve:

  QUESTION 1. -is the information just preceding or y at - it something wrong?

  QUESTION 2. -I heard there is a license of VPN AnyConnect Essentials offering up to 25 AnyConnect Licenses at the same time essential, and I would like to know what is the difference between these licenses and permits VPN AnyConnect Premium?  I'll be able to connect with a license of AnyConnect Essentials via RDP?

  QUESTION 3.-j' heard as it is another package called ASA5505-SSL10-K9 offering up to 10 SSL VPN AnyConnect Licenses, which has been deprecated all recently. A license more security with unlimited users included in this set of hardware?

  QUESTION 4 - otherwise, there is another license called ASA-SSL-10, which could be installed with license more security. It works the same way the material above Bundle?

  QUESTION 5. -in the case of reach the internal concurrent users allowed limit, how much time would it take to update the meter because a user is getting out of the internal network?

  Kind regards

  PEDRO

  You're right about anyConnect 4. The main difference of old licenses is to count users that must installed AnyConnect. Not the users who use it at the same time.

  But the minimum number of users is 25 users to my knowledge. But also for users of twenty-five and five-year subscription you pay usually less it AnyConnect Essentials and AnyConnect Mobile together.

  The order codes for this combination would be (you need both):

  • L AC-PLS-5 YR-G
  • AC-PLS-5 YR-25-S

  The arp timeout can be changed with the command... (drum roll) "arp timeout"! ;-)

• 3DES ASA5505-50-BUN-K9 [resolved] license problem

  Hello

  I have ASA505 with disabled 3DES, I heard that I can have the 3DES free license, so I contacted cisco more of 10 times to get the permit, and whenever they send me the same license as my base standing key: 5321ec6e 102e534b fc21e96c 841c8ca8 ce1727aa

  I don't understand the problem, here is the result show activation key:

  Running Permanent Activation Key:
  
  0x5321ec6e 0x102e534b 0xfc21e96c 0x841c8ca8 0xce1727aa
  
  

  Licensed features for this platform:

  Maximum Physical Interfaces    : 8              perpetual

  VLANs                          : 3              DMZ Restricted

  Dual ISPs                      : Disabled       perpetual

  VLAN Trunk Ports               : 0              perpetual

  Inside Hosts                   : 50             perpetual

  Failover                       : Disabled       perpetual

  VPN-DES                        : Enabled        perpetual

  VPN-3DES-AES                   : Disabled       perpetual

  SSL VPN Peers                  : 2              perpetual

  Total VPN Peers                : 10             perpetual

  Shared License                 : Disabled       perpetual

  AnyConnect for Mobile          : Disabled       perpetual

  AnyConnect for Cisco VPN Phone : Disabled       perpetual

  AnyConnect Essentials          : Disabled       perpetual

  Advanced Endpoint Assessment   : Disabled       perpetual

  Botnet Traffic Filter          : Disabled       perpetual

  Intercompany Media Engine      : Disabled       perpetual

  This platform has a Base license.

  The flash permanent activation key is the SAME as the running permanent key.

  And the license key cisco send me whenever isexactely the same, but it should enable the 3DES encryption algorithm:

  Inside Hosts                    : 50        

  Failover                        : Disabled  

  Encryption-DES                  : Enabled   

  Encryption-3DES-AES             : Enabled   

  Security Contexts               : Default   

  GTP/GPRS                        : Disabled  

  AnyConnect Premium Peers        : Default   

  Other VPN Peers                 : Default   

  Advanced Endpoint Assessment    : Disabled  

  AnyConnect for Mobile           : Disabled  

  AnyConnect for Cisco VPN Phone  : Disabled  

  Shared License                  : Disabled  

  UC Phone Proxy Sessions         : Default   

  Total UC Proxy Sessions         : Default   

  AnyConnect Essentials           : Disabled  

  Botnet Traffic Filter           : Disabled  

  Intercompany Media Engine       : Disabled  

  Platform = asa

  JMX152040DW: 5321ec6e 102e534b fc21e96c 841c8ca8 ce1727aa

  

  Can someone tell me where is the problem please?

  Thank you in advance.

  Plug this serial number on the EEG of tool licenses the activation key that you noted but also the text:

  "ASA5500-BA-K9.

  Beware, our records indicate that the material Cisco ASA firewall serial NUMBER you have submitted your registration was previously the license FOR a larger feature SET. »

  What other licenses has been done on this SAA? Are you the original owner? You must call the TAC for sorting if you aren't.

• ASA5505 VPN-VLAN and licenses requirements question

  Hi all -

  I want to know if an ASA 5505 can perform the following operations, and what type of license may not be required to do this:

  -Provide several subnets / VLAN, a port on the mode of the trunk 5505 in 802. 1 q so that a wireless access point can see all the VLANS.

  -Provide a tunnel VPN L2L to an ASA5520, such as _all traffic_ leave two or more local area networks virtual/subnets would be transported through the VPN, while another virtual local network (Internet comments) would not be passed through the VPN and would go directly to the ISP.

  -that a permit is required to provide the circuits on a port of the ASA and several VLANS?

  The idea is that the ASA 5505 would be on a remote site.

  One Vlan at this place would be the 'business' network, and a VLAN would be invited Internet.

  Enterprise Vlan would need to have all the packages to and since this Vlan sent through the VPN, including access Internet from the corporate PC.

  Comments Internet Vlan would be any transits the VPN and would be sent directly to the ISP (cable, Internet access)

  A Meraki AP would be connected to a trunk port on the SAA, providing WiFi public and also WiFi business.

  The subnets used by these SSID would be the VLAN defined on the SAA for public and corporate traffic.

  Note that this isn't "divides the tunnel" in the traditional sense of the term, where the remote PC company would send only corporate-interesting-traffic

  on the VPN and the PC company would have access to the Internet directly.

  The intention is that the traffic Internet-bound business PCs would be sent via the VPN to go through a filter of web content in the internal data center,

  and Internet comments traffic would not be sent to the internal data center.

  The ASA 5505 should be able to do what you describe as your needs. Should the safety license more to support circuits and features for several VLANs.

  This link may provide additional details that might be useful for you.

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa72/configuration/guide/conf_gd/specs.html

  HTH

  Rick

• I want to buy an ASA5505-SEC-BUN-K9 - online license key

  Hello guys I want to buy Cisco ASA 5505 license key by Online, so please can someone speak to me a very useful way to buy for this license - urgent please

  I guess that you do not have a dealer realtionship. In this case, go to Amazon.com and pick a.

  For example:

  http://www.Amazon.com/ASA-5505-sec-plus-license/DP/B000MFORRA

• Cisco ASA5505 Gigabit?

  Hi all

  Checked the POST on an ASA5505 (9.1 (3)) one it shows 2 Gigabit NIC:

  Total network cards found: 10

  88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002

  88E6095 rev 2 Ethernet @ index 08 MAC: 885a.92d9.f938

  88E6095 rev 2 Ethernet @ index 07 MAC: 885a.92d9.f937

  88E6095 rev 2 Ethernet @ index 06 MAC: 885a.92d9.f936

  88E6095 rev 2 Ethernet @ index 05 MAC: 885a.92d9.f935

  88E6095 rev 2 Ethernet @ index 04 MAC: 885a.92d9.f934

  88E6095 rev 2 Ethernet @ index 03 MAC: 885a.92d9.f933

  88E6095 rev 2 Ethernet @ index 02 MAC: 885a.92d9.f932

  88E6095 rev 2 Ethernet @ index 01 MAC: 885a.92d9.f931

  y88acs06 Gigabit Ethernet rev16 @ index MAC 00: 885a.92d9.f939

  Is there a Gigabit licenses on the roadmap?

  Kind regards

  Norbert

  Hello

  I doubt that it has nothing to do with subsequent changes, as the device is specced for only 150Mbps throughput.

  I saw Cisco release any model replacement, even if I asked a few times.

  I think that 2 GigabitEthernet interfaces refer to the internal-Data0 and Data1 internal interfaces

  It is the output of my own ASA

  The internal-Data0/0 interface ' ' is in place, line protocol is up

  The material is y88acs06, BW 1000 Mbit/s, 10 DLY usec

  (Full-duplex), (1000 Mbps)

  Internal-Data0/1 interface ' ' is in place, line protocol is up

  The material is 88E6095, BW 1000 Mbit/s, 10 DLY usec

  (Full-duplex), (1000 Mbps)

  Also, here is a picture of a Cisco Live! presentation on the architecture of the ASA5505 model (click to enlarge)

  

  Hope this helps

  -Jouni

• Should what license I for 25 SSL VPN peers

  Hi all

  I want to implement cluster active / standby with a pair of ASAs 5550 and I have a licensing question. Here's the "sh - key retail activation" leave two output devices...

  ASA1:

  SH - activation in detail key:

  Serial number: XXXXX

  No temporary key assets.

  Activation key running: XXXXX XXXXX XXXXX XXXXX XXXXX

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 250

  Internal hosts: unlimited

  Failover: Active/active

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 2

  GTP/GPRS: disabled

  SSL VPN peers: 2

  Total of the VPN peers: 5000

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect Cisco VPN phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes an ASA 5550 VPN Premium license.

  Flash activation key is the SAME as the key running.

  ASA2:

  SH - activation in detail key:

  Serial number: XXXXX

  No temporary key assets.

  Activation key running: XXXXX XXXXX XXXXX XXXXX XXXXX

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 250

  Internal hosts: unlimited

  Failover: Active/active

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 2

  GTP/GPRS: disabled

  VPN SSL counterparts: 25

  Total of the VPN peers: 5000

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect Cisco VPN phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes an ASA 5550 VPN Premium license.

  Flash activation key is the SAME as the key running.

  --------------------------------------------------------------

  It seems so obvious that I have to upgrade the first ASA to support 25 SSL VPN peers in order to create the cluster HA, right?

  Now, I want to know do I need the license "ASA5505-SSL25-K9" or something else.

  Thank you very much in advance for any help!

  Ah OK I see - right then: upgading pole will allow the license to share.

  Re the version target, I would recommend going directly to 8.4 (4.1). I have it deployed on several sites without problem.

• ASA Cisco license issues

  Hello

  I'm new with Cisco licenses... I produced Cisco ASA 5505 in house with base with the limit of 10 hosts license. More information below.

  I bought the 'L-ASA5505-10-UL =' upgrade remove limit hosts and I got the certificate with Pak. But when I go to the licenses of Cisco website to get the key of activation with this PAK I you will get the error message below.

  Unfortunately I didn't take in charge of the contract so I can not open a Service request as said.

  Any help what to do?

  Error message:

  Bad Sku (s) 'L-ASA5505-10-UL =' for 'ASA5505-BUN-K9': device contains the licenses following "K9-BA-ASA5500.

  Serial number = JMX1526Zxxx

  We're sorry, but the serial number provided is not the same type of platform that serial number has failed. An upgrade is requested is not permitted.

  If you want assistance in solving this problem, please open a Service request by using the TAC Service request tool

  > View version

  The devices allowed for this platform:

  The maximum physical Interfaces: 8 perpetual

  VLAN: 3 restricted DMZ

  Double ISP: Disabled perpetual

  Junction VIRTUAL LAN ports: perpetual 0

  The hosts on the inside: 10 perpetual

  Failover: Disabled perpetual

  VPN - A: enabled perpetual

  VPN-3DES-AES: activated perpetual

  AnyConnect Premium peers: 2 perpetual

  AnyConnect Essentials: Disabled perpetual

  Counterparts in other VPNS: 10 perpetual

  Total VPN counterparts: 25 perpetual

  Shared license: disabled perpetual

  AnyConnect for Mobile: disabled perpetual

  AnyConnect Cisco VPN phone: disabled perpetual

  Assessment of Advanced endpoint: disabled perpetual

  Proxy UC phone sessions: 2 perpetual

  Proxy total UC sessions: 2 perpetual

  Botnet traffic filter: disabled perpetual

  Intercompany Media Engine: Disabled perpetual

  This platform includes a basic license.

  See you soon,.

  Henri

  It's an automatic response, or a person actually answered? License Rep must respond to your e-mail. They would be able to rehost the license for you.

• Transfer DHCP requires more 802. 1 q ASA5505 trunk

  We run an ASA5505 with ip + licenses, which allows us to run multiple VLANs (in our case 3: outside, data and voice). Members of VLANs (the same two levels of security) voice and data a 802. 1 q trunk on eth0/4, passing the VLAN voice and data through the trunk to a 3750 switch.

  Our DHCP server is the data lan. Is there an equivalent command on the SAA to the Cisco router command 'helper-ip address x.x.x.x"which should be placed on the SAA voice interface vlan (svi) to pass these dhcp requests? If this is not the case, how do we get the dhcp requests through the ASA? FYI "permit same-security-traffic inter-interface" and "allowed same-security-traffic intra-interface" are configured on the firewall.

  We do not all entries in our dhcp server to Cisco phones litters, but phones are enrolled in the subnet out of Mgr call and use addresses at the level of the vocal range of dhcp on the server.

  Strange, one for sure... any help is appreciated.

  -Scott

  Scott,

  Is that what you are looking for:

  Server dhcprelay

  dhcprelay enable

  dhcprelay 90 time-out

  Check out this link given below:

  http://www.Cisco.com/univercd/CC/TD/doc/product/multisec/asa_sw/v_7_2/cmd_ref/d2_711.htm#wp1775980

  The rate of this post, if that helps.

  See you soon

  Gilbert

• ASA5505 configure VPN primary and backup

  Dear experts,

  I would like to ask you a few question that now I didn't get any primary VPN and backup connection, how can we do on this is sue? (I mean that when the primary reduction, then backup connection is automatically)

  Could you advice me how can I do?

  Best regards

  Rechard_hk

  I guess we should have asked for a bit more information, it seems Marwan and I responded almost at the same time, and I'm sure he'll provide great info.

  I had more geared towards a scenario of a firewall failure fault tolerance or an ISP connection failed in an architecture Fw DOUBLE and DOUBLE tis.

  Assuming that you want to have redundant firewall design, is when you look into the firewall active / standby to provide firewall redundancy, but when it comes to connections continues with VPN when one firewall fails, this is with characteristic State in place.

  IM providing links for reference belloe to get an idea of fws active and reserve but ASA5505 is the only model who is a stateless person, it is not dynamic which means connections will have to re - perform when one firewall fails.

  Also to implement two firewalls for the implementation of the changeover you need security more license to enable the active feature and reserve. This license will also include the activation of support DMZ and power create a VLAN to 20, as well as support Double TIS.

  Example of active / standby

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml

  Comparison of the ASA - Look into Ipsec more license and features.

  http://www.Cisco.com/en/us/products/ps6120/prod_models_comparison.html

  On the other hand you may have in the future a backup ISP link, not only do you have active failover / standby but you can also have a backup ISP must link primary link fails with ALS and follow-up of Staic routing.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

  Rgds

  Jorge

• ASA5505-SEC-PL Vs ASA5505-SEC-BUN-K9

  Hello gentlemen and ladies.

  I have a question about licensing on the SAA. I found on a Cisco's Web site the following:

  Cisco ASA 5505 Security Plus bundle ASA5505-SEC-BUN-K9

  #Includes cisco ASA 5505, unlimited number of users, switch 8-port Fast Ethernet, firewall stateful, 25 VPN IPsec peers, 2 peers of SSL VPN, stateless active / standby high availability, dual ISP support, support of DMZ, 3DES/AES license and 1 extension housing

  #Cisco ASA 5505 Security Plus bundle ASA5505-SEC-PL

  Cisco ASA 5505 Security Plus's license (provides high without active state availability / standby dual ISP, DMZ support, supported VLAN trunking and session increased and support capacity peer IPSec VPN)

  Issues related to the:

  (a) what is the difference between the two? other than the obvious like VLAN Trunking and increased session and peer VPN capabilities

  (b) can take us about which we can get is one of them or a license and the other is a collection of products (including the hardware + license)

  I get conflicting information from people so wanted to get this settled once and for all

  Thank you very much in advance

  Knoa IT

  It is an update license of all or nothing, and it is the only one offered.

• licenses for ASA 5505, site-to-site vpn

  Hi, gang,

  I've not worked on ASA for a few years, so a little rusty on the issuance of licenses. my client has 5 locations, a few computers at each location. 4 tunnels vpn site-to-site will be implemented, so that 1 Server @ main location of accounting is accessible from other. simple configuration. I wonder if I have to purchase additional licenses? This is the part number of the device that I'm aiming for:

  ASA5505-BUN-K9
  Cisco ASA 5505 Adaptive Security Appliance 8 ports Fast Ethernet Switch with 10 user licenses

  Thank you!

  Jonathan

  Your license for the VPN is perfectly fine as the Base license supports 10 VPN-peers. The 10 user license is what could restrict more.

  And if the 5505 is not yet bought, go directly to the ASA 5506 - X as the 5505 is a legacy device and will probably go little EOS.

• Confused about licensing ASA 5505

  The ASA 5505 base license not limited somehow how 'inside' subnets you can have if they are configured on a layer 3 switch that is connected to the ASA5505? I know that I can configure only 3 VLAN on the ASA - but I don't think that it forbids me to use several VLANS on my switch...

  No it does not limit the number of subnets behind it. According to your user license it will limit the number of users can go through the firewall. A version see show how many users are you licensed it. Also make sure you have all routing in place in your ASA.

• ASA5505 with 10 users. Need to connect 25 remote users with AnyConnect Client

  Hello to everyone.

  I ASA5505 with license 10 users. I need to connect 25 remote users via SSL VPN (in my case cisco Anyconnect client). So I have to buy the license more security (ASA5505-SEC-PL =) for more then 10 simultaneous VPN connections on Cisco ASA 5505. Fix?

  And the main question. What I need to order the user getting up-to-date (for example ASA5505-SW-10-50 =, or ASA5505-SW-10-UL =) license for my device Cisco ASA5505 in order to have 25 connections of concurrent remote users without restriction for each remote user?

  You need the license SecPlus for increased remote access users. But you don't need an extra user license if you still only up to 10 internal systems.