WebVPN more ipsec ASA5505

Hi all

I have 2 active ipsec on ASA5505 (license secplus) tunnel.

I would like to activate sslvpn also. Is it possible or there are issues to keep both services?

Thank you

Yes, you can run the IPSec and SSL VPN tunnels both at the same time.

For SSL VPN, it comes with the license by default 2, which means that you can have 2 simultaneous SSL VPN tunnels.

If you need more, you must purchase the license AnyConnect.

Tags: Cisco Security

Similar Questions

Questions about licenses ASA5505

Hello

I searched in the ASA 5505 Hardware packages and I learned that there is the following text:

-The base license, offering only 3 VLAN (3rd one limited). It also offers licenses for only 2 10 IPSec VPN and SSL VPN AnyConnect Premium (which includes the old Cisco VPN Client and EasyConnect connection), representing the two up to 10 VPN. There are 3 types of packages, whose numbers are:

* ASA5505-BUN - K9--> which is the basic package, offering up to 10 concurrent users internal

* ASA5505-50-BUN - K9--> with up to 50 simultaneous users internal

* ASA5505-UL-BUN - K9--> offering unlimited number of users at the same time internal

-The license more than security, offering up to 20 VLAN and unlimited number of users simultaneous internal (regarding edition hardware Bundle). It also offers licenses for only 2 25 IPSec VPN and SSL VPN AnyConnect Premium (which includes the old Cisco VPN Client and EasyConnect connection), representing the two up to 25 VPNs. There is that one type of beam, whose part number is:

* ASA5505-SEC-BUN - K9--> offering unlimited number of users at the same time internal.

If you have the base base ASA5505-BUN-K9 license and want to upgrade to the license more than security, you would activate 2 licenses:

+ the license more security--> ASA5505-SEC-PL = (or the L-ASA5505-SEC-PL = if you wish to receive by e-mail)

+ unlimited users license--> ASA5505-SW-10-UL (as if the license more security is not hardware-Bundle, it does not come with unlimited number of users)

and that is why it is better to buy the security more license material-Bundle from the outset that the upgrade later.

It comes as I could get, but I have a few questions that I would like you to help me solve:

QUESTION 1. -is the information just preceding or y at - it something wrong?

QUESTION 2. -I heard there is a license of VPN AnyConnect Essentials offering up to 25 AnyConnect Licenses at the same time essential, and I would like to know what is the difference between these licenses and permits VPN AnyConnect Premium? I'll be able to connect with a license of AnyConnect Essentials via RDP?

QUESTION 3.-j' heard as it is another package called ASA5505-SSL10-K9 offering up to 10 SSL VPN AnyConnect Licenses, which has been deprecated all recently. A license more security with unlimited users included in this set of hardware?

QUESTION 4 - otherwise, there is another license called ASA-SSL-10, which could be installed with license more security. It works the same way the material above Bundle?

QUESTION 5. -in the case of reach the internal concurrent users allowed limit, how much time would it take to update the meter because a user is getting out of the internal network?

Kind regards

PEDRO

You're right about anyConnect 4. The main difference of old licenses is to count users that must installed AnyConnect. Not the users who use it at the same time.

But the minimum number of users is 25 users to my knowledge. But also for users of twenty-five and five-year subscription you pay usually less it AnyConnect Essentials and AnyConnect Mobile together.

The order codes for this combination would be (you need both):
- L AC-PLS-5 YR-G
- AC-PLS-5 YR-25-S
The arp timeout can be changed with the command... (drum roll) "arp timeout"! ;-)

Cisco ASA 5515 two asa firewall ipsec vpn tunnel is not coming

HelloW everyone.

I configured ipsec vpn tunnel between Singapore and Malaysia with asa firewall.

but the vpn does not come to the top. can someone tell me what can be the root cause?

Here is the configuration of twa asa: (I changed the ip address all the)

Singapore:

See the race
ASA 2.0000 Version 4
!
ASA5515-SSG520M hostname
activate the encrypted password of PVSASRJovmamnVkD
names of
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 192.168.15.4 255.255.255.0
!
interface GigabitEthernet0/1
nameif DMZ
security-level 50
IP 192.168.5.3 255.255.255.0
!
interface GigabitEthernet0/2
nameif outside
security-level 0
IP 160.83.172.8 255.255.255.224
<--- more="" ---="">

!
<--- more="" ---="">

interface GigabitEthernet0/3
<--- more="" ---="">

Shutdown
<--- more="" ---="">

No nameif
<--- more="" ---="">

no level of security
<--- more="" ---="">

no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif test
security-level 100
IP 192.168.168.219 255.255.255.0
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
connection of the banner ^ C please disconnect if you are unauthorized access ^ C
connection of the banner please disconnect if you are unauthorized access
boot system Disk0: / asa922-4-smp - k8.bin
passive FTP mode
network of the SG object
<--- more="" ---="">

192.168.15.0 subnet 255.255.255.0
network of the MK object
192.168.6.0 subnet 255.255.255.0
service of the TCP_5938 object
Service tcp destination eq 5938
Team Viewer description
service tcp_3306 object
Service tcp destination eq 3306
service tcp_465 object
tcp destination eq 465 service
service tcp_587 object
Service tcp destination eq 587
service tcp_995 object
tcp destination eq 995 service
service of the TCP_9000 object
tcp destination eq 9000 service
network of the Inside_host object
Home 192.168.15.202
service tcp_1111 object
Service tcp destination eq 1111
service tcp_7878 object
Service tcp destination eq 7878
service tcp_5060 object
SIP, service tcp destination eq
<--- more="" ---="">

service tcp_5080 object
Service tcp destination eq 5080
network of the NETWORK_OBJ_192.168.15.0_24 object
192.168.15.0 subnet 255.255.255.0
inside_access_in list extended access allowed object SG ip everything
OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
access extensive list ip 192.168.15.0 outside_cryptomap allow 255.255.255.0 object MK
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 30000
debug logging in buffered memory
recording of debug trap
debugging in the history record
asdm of logging of information
host test 192.168.168.231 record
host test 192.168.168.203 record
Within 1500 MTU
MTU 1500 DMZ
Outside 1500 MTU
test MTU 1500
management of MTU 1500
no failover
<--- more="" ---="">

ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 7221.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source SG SG static destination MK MK non-proxy-arp-search to itinerary
!
network of the SG object
NAT dynamic interface (indoor, outdoor)
network of the Inside_host object
NAT (inside, outside) interface static 9000 9000 tcp service
inside_access_in access to the interface inside group
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 160.83.172.x 1
Route inside 10.0.1.0 255.255.255.0 192.168.15.199 1
Route inside 10.0.2.0 255.255.255.0 192.168.15.199 1
Route inside 10.0.11.0 255.255.255.0 192.168.15.199 1
Route inside 10.1.0.0 255.255.0.0 192.168.15.199 1
Route inside 10.8.0.0 255.255.0.0 192.168.15.199 1
Route inside 10.104.0.0 255.255.0.0 192.168.15.199 1
Route inside 192.168.8.0 255.255.255.0 192.168.15.199 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
<--- more="" ---="">

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server

Community trap SNMP-server host test 192.168.168.231 *.
No snmp server location
No snmp Server contact
Server enable SNMP traps syslog
Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
<--- more="" ---="">

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
<--- more="" ---="">

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
card crypto CRYPTO-map 2 set peer 103.246.3.54
card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto CRYPTO-map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
CRYPTO-card interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400

Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
internal GroupPolicy1 group strategy
attributes of Group Policy GroupPolicy1
Ikev1 VPN-tunnel-Protocol
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
tunnel-group 143.216.30.7 type ipsec-l2l
tunnel-group 143.216.30.7 General-attributes
Group Policy - by default-GroupPolicy1
<--- more="" ---="">

IPSec-attributes tunnel-group 143.216.30.7
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
Overall description
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
<--- more="" ---="">

inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:ccce9a600b491c8db30143590825c01d
: end

Malaysia:

:
ASA 2.0000 Version 4
!
hostname ASA5515-SSG5-MK
activate the encrypted password of PVSASRJovmamnVkD
names of
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 192.168.6.70 255.255.255.0
!
interface GigabitEthernet0/1
nameif DMZ
security-level 50
IP 192.168.12.2 255.255.255.0
!
interface GigabitEthernet0/2
nameif outside
security-level 0
IP 143.216.30.7 255.255.255.248
<--- more="" ---="">

!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif test
security-level 100
IP 192.168.168.218 255.255.255.0
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
<--- more="" ---="">

Interface Port - Channel 1
No nameif
no level of security
IP 1.1.1.1 255.255.255.0
!
boot system Disk0: / asa922-4-smp - k8.bin
passive FTP mode
clock timezone GMT + 8 8
network of the SG object
192.168.15.0 subnet 255.255.255.0
network of the MK object
192.168.6.0 subnet 255.255.255.0
service of the TCP_5938 object
Service tcp destination eq 5938
Team Viewer description
service tcp_3306 object
Service tcp destination eq 3306
service tcp_465 object
tcp destination eq 465 service
service tcp_587 object
Service tcp destination eq 587
service tcp_995 object
tcp destination eq 995 service
service of the TCP_9000 object
<--- more="" ---="">

tcp destination eq 9000 service
network of the Inside_host object
Home 192.168.6.23
service tcp_1111 object
Service tcp destination eq 1111
service tcp_7878 object
Service tcp destination eq 7878
service tcp_5060 object
SIP, service tcp destination eq
service tcp_5080 object
Service tcp destination eq 5080
network of the NETWORK_OBJ_192.168.2.0_24 object
192.168.6.0 subnet 255.255.255.0
inside_access_in list extended access allowed object SG ip everything
VPN-INTERESTING-TRAFFIC extended access list permit ip object MK SG
OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
outside_cryptomap to access extended list ip 192.168.6.0 allow 255.255.255.0 object SG
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 30000
debug logging in buffered memory
recording of debug trap
asdm of logging of information
<--- more="" ---="">

host test 192.168.168.231 record
host test 192.168.168.203 record
Within 1500 MTU
MTU 1500 DMZ
Outside 1500 MTU
test MTU 1500
management of MTU 1500
reverse IP check management interface path
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 7221.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source MK MK static destination SG SG route no-proxy-arp-search
NAT (inside, outside) static source NETWORK_OBJ_192.168.2.0_24 NETWORK_OBJ_192.168.2.0_24 static destination SG SG route no-proxy-arp-search
!
network of the MK object
NAT dynamic interface (indoor, outdoor)
network of the Inside_host object
NAT (inside, outside) interface static 9000 9000 tcp service
inside_access_in access to the interface inside group
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 143.216.30.x 1
<--- more="" ---="">

Route inside 10.2.0.0 255.255.0.0 192.168.6.200 1
Route inside 10.6.0.0 255.255.0.0 192.168.6.200 1
Route inside 192.168.254.0 255.255.255.0 192.168.6.200 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
Enable http server

No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
<--- more="" ---="">

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
<--- more="" ---="">

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
card crypto CRYPTO-map 2 set peer 160.83.172.8
card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
CRYPTO-card interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
SSH timeout 60
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
internal GroupPolicy1 group strategy
attributes of Group Policy GroupPolicy1
Ikev1 VPN-tunnel-Protocol
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
<--- more="" ---="">

tunnel-group MK SG type ipsec-l2l
IPSec-attributes tunnel-group MK-to-SG
IKEv1 pre-shared-key *.
tunnel-group 160.83.172.8 type ipsec-l2l
tunnel-group 160.83.172.8 General-attributes
Group Policy - by default-GroupPolicy1
IPSec-attributes tunnel-group 160.83.172.8
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
<--- more="" ---="">

inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: end

Good news, that VPN has been implemented!

According to the ping problem, my suggestion is to check, if some type of firewall based on host computers on both sides block ICMP requests.

Anyway, you can still use the capture of packets on the inside of the interfaces of the two ASAs, to check if the ICMP traffic is to reach the ASA.

In addition, you can try to enable ICMP inspection:

Policy-map global_policy
class inspection_default

inspect the icmp

inspect the icmp error

ASA5505 with 10 users. Need to connect 25 remote users with AnyConnect Client

Hello to everyone.

I ASA5505 with license 10 users. I need to connect 25 remote users via SSL VPN (in my case cisco Anyconnect client). So I have to buy the license more security (ASA5505-SEC-PL =) for more then 10 simultaneous VPN connections on Cisco ASA 5505. Fix?

And the main question. What I need to order the user getting up-to-date (for example ASA5505-SW-10-50 =, or ASA5505-SW-10-UL =) license for my device Cisco ASA5505 in order to have 25 connections of concurrent remote users without restriction for each remote user?

You need the license SecPlus for increased remote access users. But you don't need an extra user license if you still only up to 10 internal systems.

IPSEC of AnyConnect-IKEv2 authentication failure

I have configure Anyconnect webvpn using IPsec (IKEv2) to an ASA with version 8.4 (2). When I try to connect with Anyconnect Client mobility, I got an error message (see screenshot) authentication failed. I can't even invite him to put the name of user and password. Since him debugs, I get the following errors:

% ASA-6-302015: built connection UDP incoming 354 for outside:x.x.x.x/52171 (x.x.x.x/52171) at identity:172.16.4.2/500 (172.16.4.2/500)

% 5-ASA-750002: Local: 172.16.4.2:500 Remote:x.x.x.x:52171 Username:Unknown received a request IKE_INIT_SA

% ASA-6-302015: built connection UDP incoming 355 for outside:x.x.x.x/52172 (x.x.x.x/52172) at identity:172.16.4.2/4500 (172.16.4.2/4500)

% ASA-3-751006: failed local authentication: 172.16.4.2:4500 Remote:x.x.x.x:52172 Username:Unknown certificate. Error: Impossible to retrieve the certificate chain

% ASA-4-750003: Local: 172.16.4.2:4500 Remote:x.x.x.x:52172 Username:Unknown negotiation failed due to the ERROR: exchange Auth failed

% ASA-6-302013: built of TCP connections incoming 356 for outside:x.x.x.x/52175 (x.x.x.x/52175) at identity:172.16.4.2/443 (172.16.4.2/443)

% ASA-6-725001: from transfer SSL client outside:x.x.x.x/52175 for TLSv1 session.

% ASA-725010 7: device supports the following 4 cipher (s).

% ASA-7-725011: [1] encryption: RC4 - SHA

% ASA-7-725011: [2] encryption: AES128-SHA

% ASA-7-725011: [3] encryption: AES 256 - SHA

% ASA-7-725011: [4] encryption: DES-CBC3-SHA

% 7-ASA-725008: outside:x.x.x.x/52175 client SSL offers the following 18 cipher (s).

% ASA-7-725011: encryption [1]: DHE-RSA-AES256-SHA

% ASA-7-725011: [2] encryption: DHE-DSS-AES256-SHA

% ASA-7-725011: [3] encryption: AES 256 - SHA

% ASA-7-725011: [4] encryption: EDH-RSA-DES-CBC3-SHA

% ASA-7-725011: [5] encryption: EDH-DSS-DES-CBC3-SHA

% ASA-7-725011: [6] encryption: DES-CBC3-SHA

% ASA-7-725011: [7] encryption: DHE-RSA-AES128-SHA

% ASA-7-725011: [8] encryption: DHE-DSS-AES128-SHA

% ASA-7-725011: [9] encryption: AES128-SHA

% ASA-7-725011: [10] encryption: RC4 - SHA

% ASA-7-725011: [11] encryption: RC4 - MD5

% ASA-7-725011: [12] encryption: EDH-RSA-DES-CBC-SHA

% ASA-7-725011: [13] encryption: EDH-DSS-DES-CBC-SHA

% ASA-7-725011: [14] encryption: DES-CBC-SHA

% ASA-7-725011: encryption [15]: EXP-EDH-RSA-DES-CBC-SHA

% ASA-7-725011: encryption [16]: EXP-EDH-DSS-DES-CBC-SHA

% ASA-7-725011: [17] encryption: EXP-DES-CBC-SHA

% ASA-7-725011: [18] encryption: EXP-RC4-MD5

% ASA-725012 7: device chooses cipher: RC4 - SHA for the SSL session with client outside:x.x.x.x/52175

% ASA-6-725002: aircraft completed the SSL negotiation with customer outside:x.x.x.x/52175

% ASA-6-725007: end of the SSL session with client outside:x.x.x.x/52175.

% ASA-6-302014: disassembly of the TCP connection 356 for outside:x.x.x.x/52175 to identity:172.16.4.2/443 duration 0: 00:00 872 bytes TCP fins

Here is my configuration:

local pool VPNPOOL 172.17.1.1 - 172.17.1.40 255.255.255.0 IP mask

object obj-vpnpool network

172.17.1.0 subnet 255.255.255.0

NAT (inside, outside) static source any any destination static obj-vpnpool obj-vpnpool

standard SPLITUN-ACL access-list allowed 192.168.0.0 255.255.255.0

standard SPLITUN-ACL access-list allowed 10.1.1.0 255.255.255.0

IKEv2 crypto policy 1

aes-256 encryption

integrity sha

Group 5 2 1

FRP sha

second life 86400

Crypto ikev2 activate out of service the customer port 443

Trustpoint crypto ikev2 remote access _SmartCallHome_ServerCA

Crypto ipsec ikev2 ipsec-proposal TS1-IKEV2

Protocol esp 3des, aes to aes-192, aes-256 encryption

Esp integrity sha - 1, md5 Protocol

crypto dynamic-map DYN-map 40 value ikev2 ipsec-proposal TS1-IKEV2

card crypto ASA1VPN 65535 isakmp ipsec dynamic DYN-map

ASA1VPN interface card crypto outside

ISAKMP nat-traversal crypto

WebVPN

AnyConnect image disk0:/anyconnect-linux-3.0.5075-k9.pkg 1

AnyConnect image disk0:/anyconnect-macosx-i386-3.0.5075-k9.pkg 2

AnyConnect image disk0:/anyconnect-win-3.0.5075-k9.pkg 5

AnyConnect profiles Main_IKEv2_client_profile disk0: / Main_IKEv2_client_profile.xml

AnyConnect enable

allow outside

tunnel-group-list activate

internal GroupPolicy_Main_IKEv2 group strategy

attributes of Group Policy GroupPolicy_Main_IKEv2

Ikev2 VPN-tunnel-Protocol

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value SPLITUN-ACL

value of server DNS 192.168.0.245

value of server WINS 192.168.0.245

jiffix.local value by default-field

WebVPN

AnyConnect value Main_IKEv2_client_profile type user profiles

AnyConnect Dungeon-Installer installed

type tunnel-group RemoteAccessIKEv2 remote access

attributes global-tunnel-group RemoteAccessIKEv2

Group Policy - by default-GroupPolicy_Main_IKEv2

address VPNPOOL pool

tunnel-group RemoteAccessIKEv2 webvpn-attributes

enable Main_IKEv2 group-alias

username user password xxxxx

attributes of user username

VPN-group-policy GroupPolicy_Main_IKEv2

management-access inside

SSH 172.17.1.0 255.255.255.0 inside

Main_IKEv2_client_profile. XML

http://schemas.xmlsoap.org/encoding/">

hostname - ASA (IPsec)

y.y.y.y

IPsec

You have the trustpoint with configured '_SmartCallHome_ServerCA' certificate? The partial configuration above don't indicte something little script which is where authentication does not reach your output to the log above.

The output from the output of 'show crypto ca server certificates' would be useful.

VPN site to Site - Cisco 2621

Hello

I want to load an IOS on my Cisco 2621 router. My router is NOT a XM router. My router does not a GOAL card on board. My mem & flash is:

2621 (MPC860) processor of Cisco (revision 0 x 00) with 61440K / 4096K bytes of memory

Its my assumption that I do not have a card BUT and that a large part of the map of the GOAL is to make the treatment...

So, can anyone recommend an IOS that would make a site to ipsec/3des VPN?

Here's the last IOS with crypto-

IP/FW/IDS MORE IPSEC 3DES BASIC

C2600-ik9o3s3 - mz.123 - 26.bin

Release date: 18 March 2008

Size: 15706,82 KB (16083780 bytes)

Minimum memory: DRAM: 64 MB Flash: 16 MB

Hope that helps.

ASA 5520 - VPN using LDAP access control

I'm setting up an ASA 5520 for VPN access. Authorization & authentication using an LDAP server. I have successfully configured tunnel, and I can access internal resources. What I want to do now is to limit access to a specific ad group membership. In the absence of this belonging to a group, a user cannot access the VPN.

My VPN client software testing is Cisco Systems VPN Client 5.0.05.0290 Version. The Group authentication is configured in a connection entry that identifies the Group of Tunnel. I think I wrote that correctly.

The Version of the software on the SAA is 8.3 (1).

My current challenge is getting the VPN to stop letting each request for access through little matter belonging to a group. I found the thread below to be significantly useful, but there is obviously something which is not entirely mesh with my situation.

https://supportforums.Cisco.com/message/3232649#3232649

Thanking all in advance for everything offered thoughts and advice.

Configuration (AAA LDAP, group policy and group of tunnel) is below.

AAA-Server LDAP protocol ldap
AAA-Server LDAP (inside) host x.x.y.12
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
microsoft server type
LDAP-attribute-map LDAP_MAP
AAA-Server LDAP (inside) host x.x.y.10
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
LDAP-attribute-map LDAP_MAP
AAA-Server LDAP (inside) host x.x.y.11
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
microsoft server type
LDAP-attribute-map LDAP_MAP

AAA-Server LDAP (inside) host x.x.y.10
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
LDAP-attribute-map LDAP_MAP
AAA-Server LDAP (inside) host x.x.y.11
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
microsoft server type
LDAP-attribute-map LDAP_MAP
!
internal group NOACCESS strategy
NOACCESS group policy attributes
VPN - concurrent connections 0
Protocol-tunnel-VPN IPSec webvpn
address pools no
attributes of Group Policy DfltGrpPolicy
VPN - 10 concurrent connections
Protocol-tunnel-VPN IPSec webvpn
enable IPSec-udp
vpn group policy - pro internal
vpn - pro group policy attributes
value x.x.y.17 x.x.y.27 WINS server
Server DNS value x.x.y.19 x.x.y.29
VPN - 50 simultaneous connections
Protocol-tunnel-VPN IPSec svc
group-lock value vpn - pro
field default value domain.com
value of address ip-vpn-pro pools
WebVPN
client of dpd-interval SVC no
dpd-interval SVC 1800 bridge
!

attributes global-tunnel-group DefaultRAGroup
LDAP authentication group-server
LDAP authorization-server-group
Group Policy - by default-vpn-pro
authorization required
type group tunnel vpn - pro remote access
attributes global-tunnel-group-vpn - pro
LDAP authentication group-server
Group-server-authentication (LDAP outside)
LDAP authorization-server-group
Group Policy - by default-vpn-pro
band-Kingdom
password-management
band-band
authorization required
type tunnel-group NOACCESSGROUP remote access
attributes global-tunnel-group NOACCESSGROUP
LDAP authentication group-server
NOACCESS by default-group-policy

Hello

The configuration of what you are looking for is a feature called DAP (Dynamic Access Policy)

The following link will explain how to set up the same.

http://www.ciscosystems.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml

I hope this helps.

Kind regards

Anisha

P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

My router supports CBAC?

It seems that some router IOS versions 12.2 or better to support CBAC and others do not. Is there something that I can look in the NVA SH or SH RUN where I can tell if the operating system supports the IOS Firewall Feature Set?

OK, let's try again. I know it can be confusing. In 12.1 images and earlier versions (I think), you can identify an IOS image that has the CBAC (or IOS Firewall because it sometimes referred to as) features enabled by finding an 'o' in the name of the image file. Beginning in paragraph 12.2 and later versions, you can identify it with a 'o3' in the name of the image file. They both mean the same thing. The image I posted wasn't c1600-osy56i-l. 121 - 11.bin. Note the "o" in the name of the image after the flag of the platform.

Now, to the FW part. In the center of software for different IOS images, you will see various lengthy game descriptions. The active CBAC feature sets will have FW in the description. For example, http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi?get_crypto=&data_from=&hardware_name=1601-1604&software_name=&release_name=12.2.19a&majorRel=12.2&state=:HW:RL & type = limited % 20Deployment you can see the following: IP/FW MORE IPSEC 56

Note the above FW. This indicates that this link will take you to an image which has features of firewall enabled and has also a 'o' or 'o3' in the name of the image file.

Do not confuse the version "bootstrap" in the code with the version of the code that is running on the router. You can go back and review the output. This should be the code of 12.1 (11) for a 1600.

CBAC has been added to IOS in 12.0 (5) T and later in 12.1 mainline as well. All versions should subsequently have active CBAC IF a 'o' or 'o3' exists in the name of the image file.

I really hope this helps.

Scott

Cisco ASA5505 with double tis + IPSEC

Hello guys,.

I have problem with double ISP + IPSEC on my cisco ASA5505 dry more license.

Routing works OK (to connect to the Internet from siteA is work trought

1 also second ISP) but IPSEC works trought just the first

INTERNET SERVICE PROVIDER! There seemt that phase 1 and 2 of the Protocol IPSEC is correct but the packages

Encrypt just but no not decryption. You have an idea what is the problem?

I try to ping from the (PC - 10.4.1.66) siteA siteB (PC - 10.3.128.50)

Thank you

config site A:

##########################################################################

ASA5505 Version 8.2 (1)

interface Vlan1

nameif inside

security-level 100

IP 10.4.1.65 255.255.255.248

!

interface Vlan2

nameif outside

security-level 0

IP 192.168.1.2 255.255.255.0

!

interface Vlan3

internet nameif

security-level 0

IP address 212.89.235.yy 255.255.255.248

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

switchport access vlan 3

outside_cryptomap list extended access allow icmp 10.4.1.64 255.255.255.248 10.3.128.0 255.255.255.0

10.4.1.64 IP Access-list extended sheep 255.255.255.248 allow 10.3.0.0 255.255.0.0

10.4.1.64 IP Access-list extended sheep 255.255.255.248 allow 10.16.0.0 255.255.0.0

access inside extended ip permit list an entire

extended permitted inside a whole icmp access list

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

Internet MTU 1500

no failover

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 621.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

Global interface (internet) 1

NAT (inside) 0 access-list sheep

NAT (inside) 1 10.4.1.64 255.255.255.248

Access-group internet_in in interface outside

internet_in group to access the Web interface

Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 track 1

Internet route 0.0.0.0 0.0.0.0 212.89.235.yy 254

Server enable SNMP traps snmp authentication linkup, linkdown cold start

monitor SLA 123

interface type echo protocol ipIcmpEcho 212.89.229.xx outdoor

NUM-package of 3

frequency 10

Annex ALS life monitor 123 to always start-time now

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

3600 seconds, duration of life crypto ipsec security association

Crypto ipsec kilobytes of life - safety 4608000 association

card crypto outside_map0 1 match address outside_cryptomap

card crypto outside_map0 1 set 212.89.229.xx counterpart

outside_map0 card crypto 1jeu transform-set ESP-AES-256-SHA

outside_map0 map 1 lifetime of security association set seconds 28800 crypto

card crypto outside_map0 1 set security-association life kilobytes 4608000

card crypto game 2 outside_map0 address outside_cryptomap_1

outside_map0 interface card crypto outside

outside_map0 card crypto internet interface

ISAKMP crypto identity hostname

crypto ISAKMP allow outside

crypto ISAKMP enable internet

crypto ISAKMP policy 3

preshared authentication

aes-256 encryption

sha hash

Group 2

life 300

!

track 1 rtr 123 accessibility

Telnet 10.4.1.64 255.255.255.248 inside

Telnet timeout 1440

SSH 10.4.1.64 255.255.255.248 inside

SSH 212.89.229.xx 255.255.255.255 outside

SSH timeout 60

SSH version 2

Console timeout 0

management-access inside

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

NTP server 194.160.23.2 source outdoors

WebVPN

attributes of Group Policy DfltGrpPolicy

Protocol-tunnel-VPN IPSec l2tp ipsec

username xx

tunnel-group 212.89.229.xx type ipsec-l2l

212.89.229.XX group of tunnel ipsec-attributes

pre-shared-key *.

siteA # sh crypto isakmp his d

ITS enabled: 1

Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)

Total SA IKE: 1

1 peer IKE: 212.89.229.xx

Type: L2L role: initiator

Generate a new key: no State: MM_ACTIVE

Encryption: aes - 256 Hash: SHA

AUTH: preshared to life: 300

Remaining life: 91

# sh crypto ipsec siteA his

Interface: internet

Tag crypto map: outside_map0, seq num: 1, local addr: 212.89.235.yy

outside_cryptomap list of access allowed icmp 10.4.1.64 255.255.255.248 10.3.128.0 255.255.255.0

local ident (addr, mask, prot, port): (10.4.1.64/255.255.255.248/1/0)

Remote ident (addr, mask, prot, port): (10.3.128.0/255.255.255.0/1/0)

current_peer: 212.89.229.xx

program #pkts: 7, #pkts encrypt: 7, #pkts digest: 7

#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0

compressed #pkts: 0, unzipped #pkts: 0

#pkts uncompressed: 7, comp #pkts failed: 0, #pkts Dang failed: 0

success #frag before: 0, failures before #frag: 0, #fragments created: 0

Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0

#send errors: 0, #recv errors: 0

local crypto endpt. : 212.89.235.115, remote Start crypto. : 212.89.229.2

Path mtu 1500, fresh ipsec generals 74, media, mtu 1500

current outbound SPI: 2A9B550B

SAS of the esp on arrival:

SPI: 0xCF456F65 (3477434213)

transform: aes-256-esp esp-sha-hmac no compression

running parameters = {L2L, Tunnel}

slot: 0, id_conn: 32768, crypto-card: outside_map0

calendar of his: service life remaining (KB/s) key: (4374000/28629)

Size IV: 16 bytes

support for replay detection: Y

Anti-replay bitmap:

0x00000000 0x00000001

outgoing esp sas:

SPI: 0x2A9B550B (714822923)

transform: aes-256-esp esp-sha-hmac no compression

running parameters = {L2L, Tunnel}

slot: 0, id_conn: 32768, crypto-card: outside_map0

calendar of his: service life remaining (KB/s) key: (4373999/28629)

Size IV: 16 bytes

support for replay detection: Y

Anti-replay bitmap:

0x00000000 0x00000001

# sh logging asdm siteA | I have 10.3.128.50

6. 19 sep 2011 10:27:37 | 302020: built outgoing ICMP connection for faddr gaddr laddr 10.4.1.66/1024 10.4.1.66/1024 10.3.128.50/0

6. 19 sep 2011 10:27:39 | 302021: connection of disassembly ICMP for faddr gaddr laddr 10.4.1.66/1024 10.4.1.66/1024 10.3.128.50/0

config site B:

##########################################################################

ASA 5510 Version 8.0 (4)

interface Ethernet0/0

nameif outside

security-level 0

IP address 212.89.229.xx 255.255.255.240

OSPF cost 10

interface Ethernet0/1.10

VLAN 10

nameif users

security-level 50

IP 10.3.128.0 255.255.255.0

10.3.128.0 IP Access-list extended siteA 255.255.255.0 allow 10.4.1.64 255.255.255.248

Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

3600 seconds, duration of life crypto ipsec security association

Crypto ipsec kilobytes of life - safety 4608000 association

outside_map crypto card 9 matches the address SiteA

card crypto outside_map 9 peers set 212.89.229.xx

card crypto outside_map 9 game of transformation-ESP-AES-256-SHA

life card crypto outside_map 9 set security-association seconds 28800

card crypto outside_map 9 set security-association life kilobytes 4608000

outside_map crypto 10 card matches the address SiteA

card crypto outside_map 10 peers set 212.89.235.yy

outside_map crypto 10 card value transform-set ESP-AES-256-SHA

life safety association set card crypto outside_map 10 28800 seconds

card crypto outside_map 10 set security-association life kilobytes 4608000

crypto ISAKMP policy 20

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

tunnel-group 212.89.229.xx type ipsec-l2l

212.89.229.XX group of tunnel ipsec-attributes

pre-shared-key *.

tunnel-group 212.89.235.yy type ipsec-l2l

212.89.235.yy group of tunnel ipsec-attributes

pre-shared-key *.

SiteB # sh crypto isakmp his d

HIS active: 7

Generate a new key SA: 1 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)

Total SA IKE: 8

8 peer IKE: 212.89.235.115

Type: L2L role: initiator

Generate a new key: no State: MM_ACTIVE

Encryption: aes - 256 Hash: SHA

AUTH: preshared to life: 300

Remaining life: 245

# Sh crypto ipsec SiteB his | b 212.89.235.yy

current_peer: 212.89.235.yy

#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0

decaps #pkts: 12, #pkts decrypt: 12, #pkts check: 12

compressed #pkts: 0, unzipped #pkts: 0

#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0

success #frag before: 0, failures before #frag: 0, #fragments created: 0

Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0

#send errors: 0, #recv errors: 0

local crypto endpt. : 212.89.229.xx, remote Start crypto. : 212.89.235.yy

Path mtu 1500, fresh ipsec generals 74, media, mtu 1500

current outbound SPI: CF456F65

SAS of the esp on arrival:

SPI: 0x2A9B550B (714822923)

transform: aes-256-esp esp-sha-hmac no compression

running parameters = {L2L, Tunnel}

slot: 0, id_conn: 4378624, crypto-card: outside_map

calendar of his: service life remaining (KB/s) key: (3914999/27310)

Size IV: 16 bytes

support for replay detection: Y

Anti-replay bitmap:

0 x 00000000 0x00001FFF

outgoing esp sas:

SPI: 0xCF456F65 (3477434213)

transform: aes-256-esp esp-sha-hmac no compression

running parameters = {L2L, Tunnel}

slot: 0, id_conn: 4378624, crypto-card: outside_map

calendar of his: service life remaining (KB/s) key: (3915000/27308)

Size IV: 16 bytes

support for replay detection: Y

# sh logging asdm siteB. I have 10.4.1.66

6. 19 sep 2011 10:29:49 | 302021: connection of disassembly ICMP for faddr gaddr laddr 10.3.128.50/0 10.3.128.50/0 10.4.1.66/1024

6. 19 sep 2011 10:29:50 | 302020: built ICMP incoming connections for faddr gaddr laddr 10.3.128.50/0 10.3.128.50/0 10.4.1.66/1024

I'm glad that this answer to your question, feel free to mark the post as answered and the rate of useful messages

Good day.

Is there one GUI, other than Assistant Deputy Ministers, and the CSM for test site vpn to ipsec tunnels on an asa5505/asa5510?

Is there a GUI, other than the Assistant Deputy Ministers and the Security Manager cisco IPSec of Cisco ASA5505/5510 test site to vpn tunnels. I usually go through the steps listed in here in the link below in the terminal window, but it sucks when you have several tunnels to keep abreast of.

http://www.nwdump.com/troubleshooting-IPSec-VPN-on-ASA/

I would have preferred one that works with Freebsd or LInux, as the cisco security manager CSM v4.1 is limited to only current running on windows server 2008 ent.

Thank you

Jason

No, for troubleshooting the best way is to use the CLI that will give you debug output on where it is lacking.

For configuration, outside the CLI, ASDM and CSM, unfortunately there is no other tool that works on Linux/Freebsd because it is more specific orders of the ASA and only limited to the CLI, ASDM, or CSM.

IPSEC VPN on ASA5505

Hello, hope you can help me:

I need to configure an IPSEC VPN on an ASA5505, with one. PFX certificate to authenticate with the VPN endpoint. I can install the certificate as a certificate authority, but when I use the VPN Site - to - Site Wizard, I put the IP address peer, afterI try to select the certificate that is downloaded, but when I click on the name of the certificate, there is no certificate

I don't I can solve this problem?

Thanks to all in advance

Hello

Do you see the certificate imported as cert ID? If so, you can follow this guide

http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

HTH

Averroès.

ASA5505 - connection reset when you try to SSH IPSEC tunnel

Hello

VPN IPSEC just bought myself an ASA5505 to replace a PIX 501 and having been transferred to the bulk of the previous configuration, I managed to get the two tunnels to work as before.

Unfortunately when I try and SSH for the SAA the right connection restores instantly even when the tunnel is up. It seems as if the ASA actively refuses the connection, if the journal does not specify this. I had always assumed that the traffic on an established IPSEC tunnel has been implicitly trust and not subject to the usual rules of access list.

I can't SSH to the ASA in the 10.0.0.x range, but I can't SSH to a machine on 10.27.0.4 (I know the tunnel is up and working)

Reference attached config (less sensitive information not relevant).

Also - although I'm not sure of the relevance is given the tunnels seem to work - when I get the line "meepnet-map outside crypto map interface" in the reports of the ASA configuration mode "warning: the crypto map entry is incomplete!" even though I provided the access list, peers, and transform-set variables.

Any help gratefully received! :)

Thank you

DAZ

Hello Darren,

Please mark as answer, if your querry is resolved. Enjoy your time!

Kind regards

Ankur Thukral

Community Manager - security & VPN

Transfer DHCP requires more 802. 1 q ASA5505 trunk

We run an ASA5505 with ip + licenses, which allows us to run multiple VLANs (in our case 3: outside, data and voice). Members of VLANs (the same two levels of security) voice and data a 802. 1 q trunk on eth0/4, passing the VLAN voice and data through the trunk to a 3750 switch.

Our DHCP server is the data lan. Is there an equivalent command on the SAA to the Cisco router command 'helper-ip address x.x.x.x"which should be placed on the SAA voice interface vlan (svi) to pass these dhcp requests? If this is not the case, how do we get the dhcp requests through the ASA? FYI "permit same-security-traffic inter-interface" and "allowed same-security-traffic intra-interface" are configured on the firewall.

We do not all entries in our dhcp server to Cisco phones litters, but phones are enrolled in the subnet out of Mgr call and use addresses at the level of the vocal range of dhcp on the server.

Strange, one for sure... any help is appreciated.

-Scott

Scott,

Is that what you are looking for:

Server dhcprelay

dhcprelay enable

dhcprelay 90 time-out

Check out this link given below:

http://www.Cisco.com/univercd/CC/TD/doc/product/multisec/asa_sw/v_7_2/cmd_ref/d2_711.htm#wp1775980

The rate of this post, if that helps.

See you soon

Gilbert

Difference between webVPN, SSL vpn and ipsec client

Hello

We just bought an ASA5510 and I am trying to understand the difference of the possibilities mentioned VPN. Can anyone describe the differences and use scenarios of all types of remote access vpn of the asa?

Thanks in advance.

Rgds,

Rasmus

Hi Rasmus,

They use different SSH and IPSEC protocols, and there is also of course in terms of security.

SSL is easy to deploy than ipsec. Imagine that you have 200 + users and to connect to the vpn, you must give them the pcf file and client software, which is not required in the case of SSL.

Kind regards

~ JG

Please note if assistance

Wildcard to attribute LDAP - IPSEC not WebVPN

Hello

I have installation using LDAP authentication and it works fine.

I'm trying to limit to only users who are members of a security group (VPN users) to VPN in.

I created a map to attribute LDAP (vpnmap) that checks if the user is a member of the required security group and if correct assigns a group policy (XXXvpntunnel).

However, if a user is not a member of the group, the plan of ldap attribute does not affect Group Policy above it, but the user can always VPN in and when I do a check for group policy being used sh vpn-sessiondb remote detail, it shows me the same XXXvpntunnel used group policy.

I created another group policy called XXXvpntunneldeny with ipsec sessions set to 0, but how can I assign this profile to group users who aren't a memberOf VPN users, so that they can not VPN in?

I also tested by adding SamAccountname in the map of the attribute and the value "Administrator" and "xxxvpntunneldeny" group policy and it stops falling administrator in the via the VPN, but I want to be able to use a wildcard character to prevent all users not in the security VPN users group to connect through the VPN.

Any suggestions on the best way to prevent users are not part of the VPN users group in AD to VPN in?

Thank you.

Here is a good link http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008089149d.shtml

modify the group policy by default for vpn - concurrent connections 0

apply a vpn simultaneous connections in the new group policy-specific.

attributes of Group Policy DfltGrpPolicy

VPN - concurrent connections 0

Group POLICY-policy attributes

VPN - 10 concurrent connections

I was able to get this to work.

forget the mapping for the call permissions. not necessary here.

If someone are mapped to one of your manually created group policies, only default group policy applies, and they are unable to open a session.

WebVPN more ipsec ASA5505

Similar Questions

Maybe you are looking for