ASCII data logging / or something readable!

Similar Questions

• Access ntuser.dat.log in NETWORK services folder refused even in safe MODE

  I try to accessntuser.dat.log in the file services NETWORK even in safe MODE but not private.  I am logged in as ADMINISTRATOR.  I guess that's the case as well if I connected any other user?

  I looked in the MGR TASK to try and identify what process this block, but I am at a loss.  Anyone know which circles I need to pass through power to life this file?

  Guessing that you mean this file:

  c:\Documents and Settings\NetworkService

  You cannot open the file because XP is running and the file is in use and the Task Manager will not help you indicate what (s) blocking process your effort to open the file (it is not what is the Task Manager for).

  Sometimes, you can copy a file open and then open the copy, but it will not work with ntuser.dat.log and your efforts to access the file will give results like:

  

  

  

  If you want to open the file, you can open a session under a different name and access the file of ntuser.dat.log of another user in this way (since the other user will not in use).

  For example, if I am logged on as user ElderK I can't access my ntuser.dat.log file but I can access the file owned by another user as Jose in looking here:

  c:\Documents and Settings\Jose

  Or, you can start on something like a Hiren Boot CD and access the file from there since your XP will not work.

  I see no reason to watch the ntuser.dat.log file is binary data, then maybe you can tell us what you're trying to do and why (or you just practice).

• RS - 232 ascii data analysis

  I have a need to compare the incoming of RS-232 ascii data tables or tables for accuracy. I can generate data using the RS-232 module, but I don't know what to do with incoming data. Orders and incoming data vary. The data is a string variable. Because it varies with the command that I don't know how to compare it to a table of choice etc.

  JLW

  There is an error in my formula... it is based on a variable that is not really defined.

  Thus,.

  strval (substr (${STR_3}, strind (${STR_3}, "current =" "") + 10, strind (${STR_3}, "(") - strind (${STR_3}, "current =" "") + 10 ")))

  the syntax is:

  substr (String, start, length)

  STRIND (String, search string) - gives you a number that is the beginning of the search string, must be added in advance at the end of the search string

  strval (string) - transforms a string in a number

  So, to deconstruct the formula

  Browse to the location of the number, in this case, it is immediately after "current =", so look for this string and add 10 to advance beyond it. "

  Find the location of the next bracket, look for "().

  Calculate the length of the number by subtracting the position of the bracket of the position of the beginning of the number

  current XXXXXXX = 42.0 (ampsx10)

  ^              ^      ^

  A             B     C

  East strind (${STR_3}, "current =" "")

  B = A + 10 or strind (${STR_3}, "current =" "") + 10

  C = strind (${STR_3} "(" ")")

  length b = C - B or C - 10 A +.

  So, using this notation, the above formula is

  STRVAL (SUBSTR (STRING, A + 10, C - A + 10))

• the Ntuser.dat.log file size

  Hello

  I found this hidden file (located in the C:\Document and Settings\MyUsername\ folder) ntuser.dat.log , keeps changing itself... (every few seconds/minutes)
  its size is 1 KB to 400kb ~
  Is this normal?
  I thought that he should only updated when logging in or out, am I wrong?
  My OS is Windows XP SP3.

  Hello

  The NTUSER. DAT is a registry file. NTUSER each user. DAT file contains the registry settings to their individual account. The Windows registry, is a "central hierarchical database" that contains information about user profiles, hardware and software contained on a computer. Does Windows constantly reference registry throughout its operation of its files. The configuration of the "HKEY_CURRENT_USER" of the registry branch is supported by NTUSER the current user. DAT file.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry. Check out the following link.
  http://support.Microsoft.com/kb/322756

• Ntuser.dat.LOG files are important to include in a backup to transfer files to a new computer?

  Ntuser.dat.LOG files are important to include in a backup that is used to transfer files to a new computer? When you try to backup or copy files I get the message that these files (there are 4 of them) cannot be saved or copied because they have already opened and used on the computer. A single file is 256 KB and another has 0 KB. Can not see the other two

  Hi MAnnetteFox,

  Thanks for posting the query on Microsoft Community.

  You do not need to take backup of these files and they are normal files that will be generated.

  In the future, if you have problems with Windows, get back to us. We will be happy to help you.

• Unable to show the data logged in simple cdc?

  Hello

  I want to get the changed data only inserted into the target table.

  For this,.

  I create model & select JKM Oracle Simple.

  I create the data store (with data) source & target (empty) table.

  Next. I add source table to cdc and start log.

  again, I insert a row in the source table. After I check source table-> cdc > data logged--> "changed data are coming with success.

  
  

  
  

  
  

  I create interface for the changed data only inserted into the target table.

  I drag the Table logged as a source and the required target. On the data from the Source store, check the option box " JOURNALISÉ DATA ONLY " for this example I used IKM SQL update SQL command.

  I checked the source data after selecting " JOURNALISÉ DATA ONLY " option in the properties of the source. I have not logged data.

  
  

  Please help me,

  Thanks in advance,

  A.Kavya.
  

  
  

  You must define who subscribed using Jornalized data, in this case, 'CONTROLLER '.

  

• Error ORA to rename data/log files

  Hello
  
  I wanted to move my data files to the new location, and now my TEMP was not moving properly.
  
  SQL > bootable media.
  ORACLE instance started.
  
  Total System Global Area 4259082240 bytes
  Bytes of size 2166488 fixed
  922747176 variable size bytes
  3321888768 of database buffers bytes
  Redo buffers 12279808 bytes
  Mounted database.
  SQL > ALTER DATABASE RENAME FILE ' / oracleGC/oem11g/oradata/oem11g/temp01.dbf' TO ' / oradata/oem11g/data/temp01.dbf';
  
  Database altered.
  
  SQL >
  SQL >
  SQL > alter database open;
  
  Database altered.
  
  
  SQL > SELECT name FROM v$ datafile;
  
  NAME
  --------------------------------------------------------------------------------
  /oradata/oem11g/data/System01.dbf
  /oradata/oem11g/data/undotbs01.dbf
  /oradata/oem11g/data/sysaux01.dbf
  /oradata/oem11g/data/users01.dbf
  /oradata/oem11g/data/Mgmt.dbf
  /oradata/oem11g/data/mgmt_ecm_depot1.dbf
  
  Now, I get the following errors:
  
  
  When I try to rename, I get the error below: the dbf is in both places.
  
  SQL > ALTER DATABASE RENAME FILE ' / oracleGC/oem11g/oradata/oem11g/temp01.dbf' TO ' / oradata/oem11g/data/temp01.dbf';
  ALTER DATABASE RENAME FILE ' / oracleGC/oem11g/oradata/oem11g/temp01.dbf' TO ' / oradata/oem11g/data/temp01.dbf'
  *
  ERROR on line 1:
  ORA-01511: Error renaming data/log files
  ORA-01516: file nonexistent log, datafile or tempfile
  "/ oracleGC/oem11g/oradata/oem11g/temp01.dbf".

  user771256 wrote:
  Yes is working now.
  Wouldn't it appears with the following?

  SELECT NAME FROM V$ DATAFILE;

  Nope,
  Given that the file that you are interested in is a temporary file (temporary tablespace) and not of datafile he show up in v$ datafile but v$ tempfile

  Concerning
  Anurag

• Import ASCII dates with different format

  Hello

  I need to import data from a CSV of ASCII.

  The problem is the date format in this particular data file (.csv)

  The date format for day< 10="" and="" month="" from="" jan="" to="" sep="">

  AAAA/_M/_Dthe character '_' is a simple space, not an underscore literally

  The format of the date days > = 10 and Jan to Sep month is:

  _M/JJ/AAAA

  The format of the date days > = 10 and months of Oct to dec is:

  YYYY/MM/DD

  The date format for day< 10="" and="" months="" from="" oct="" to="" dec="">

  YYYY/MM/_D

  Possible solution:

  I already create a routine that recognizes the date in the title and one of the 4 (.stp) filter uses for data processing. These are the works.

  Next problem:

  The days are separated into 2 files, a file from 09:00 to 21:00 one day and the other from 21:00 to 09:00 on the following day. It's the way I've lost data when the day changes from 9th to the 10th of each month and the month change of Sept Oct and Dec to Jan.

  I just need to delete the blankspace unconfortable before the changes of dates 2-digit, but I do not know how to deal with the before CSV imported to tiara (10.2).

  My other idea is to recognize this file and any double (once with each please) but I need to exactly position the import is not the problem with the data of novalue. (Until know I got complicated for a simple mistake of blankspace).

  I hope that you have ideas...

  Thanks in advance...

  I don't know if I understand that measures are not clear. Here's what I think you want to do:

  (1) load data from different files in DIAdem

  To do this, you must use "DataFileLoad("E:\Customer_Requests\caracasnet\log(111231).csv","caracasnet_log","Load") call.

  You call DataFileLoad for each of the files.

  (2) you want to concatenate the groups.
  This should be no different than what you've done up to now

  (3) you want to store the data in a file (TDM).
  To do this, you must call DataFileSave (...)

  Let me know if you have any other questions...

• Challenge of data logging

  I designed the VI attached to achieve a certain task. I've been on it since yesterday but decided to take a different approach.

  I want to save data in the log.xls file every five seconds (or as the timer would clarify), continuously. When the counter reaches 2 loop the inner circle, ends the inner loop. This means that there will always be three records in the log at any time.

  By clicking on the button, a 'snapshot' of the file log.xls must be taken, which means that all the content of the log.xls file should be stored in the snapshot.xls file. This should happen only once and the inner loop will continue to run afterwards (IE continue to record data in the log.xls file). Please make sure that the snapshot.xls file is not overridded with new data from the log.xls file.

  Indeed the Instant file would contain all the log.xls file at the point of the inner loop ends once the button is pressed.

  I ran the code several times, but nothing in the file snapshot.xls.

  Where should I go from here please?

  
  

• Smaller data logs

  I use SignalExpress, full version, with a cDAQ9174 3.5.0, 9205 and 9217.

  The temperature data are 1 sample/s.  The tension strings are 1000/s.  I use the DC function on data V and which seems to be of 10 samples/s.  I also monitor the AC RMS voltage after a high-pass filter.

  The test runs for a day or two, I would like to log in order to keep the data every 10 seconds or more.

  From what I found, I should be able to use the statistical function, set it to the average, set the time for the calculation of the average of ten seconds, and then check the measurement to restart at each iteration, and then connect the statistical data.

  However, I can't find the setting for the length of the iteration, and the reboot box is not available on the DC database.

  Thanks for your help!

  Hi Arvo,

  The acquisition steps DAQmx returns an array of data sampled at treat - for the length of the iteration, I would change the number of samples on DAQmx Acquire input.  For example, if you buy 1000 Hz, acquiring 10 k samples will cause DAQmx Acquire back 10 seconds of data to be processed.  Log on the DC values and value at the end of this treatment and the result should be a point every 10 seconds.

  Best regards

  John

• Scope of data logging

  Hello

  I'm trying to create a scope that will record a data section so that it can be consulted at a later date... I use a queue to store the data that I log on, although when the section of my code is run that stores the data in the queue, no data ends here and no error is produced. I really don't see what I'm doing wrong. Is it possible someone could have a look att the attached vi (recorded for LabVIEW 8.0) and see what I'm doing wrong, it would be greatly appreciated!

  Thank you, Alec

  You AND-ing, the event to place of Capture with a FALSE constant, which will always give you false and you'll never go to the "Stored update" event. Remove this piece of code and it will work as you can hear.

  The best way to determine which button was pressed would be to use a structure of the event. In addition, it would be better to have a one Stop button that stops all the loops. See this post for options on how to do it: http://forums.ni.com/t5/LabVIEW/What-is-the-preferred-way-to-stop-multiple-loops/m-p/1035851

• SonicWALL TZ-215 how to convert .exp into something readable

  Since the Sonicwalls make it very difficult to read their configuration files and they do not have their own conversion tool (do not know why they do not), can anyone recommend some options. I have Sonic player but it has a bug that I keep hitting, so I was hoping for others.

  Thank you

  Mike

  This link has a couple of different options that you may find useful.

  You can still be disappointed by the results because it is still quite unreadable just because of the amount of data returned.

  https://community.Spiceworks.com/topic/465032-convert-a-SonicWALL-config-file-to-a-readable-text-file

• BlackBerry Smartphones how can I convert save the file into something readable!

  Using the Desktop Manager that I created a .ipd backup file.

  Now... How can I convert these data into something I can easily recognize?

  Oops - I forgot that the app... JSanders thanks!

• CPU, RAM and disk, file system information for the data, logs, temp, Archive for database

  Hello gurus,
  
  How can we see what size of CPU and RAM for the database? According to the previous steps of this great site, I could able to do
  

  SQL> show parameter sga_max_size
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  sga_max_size                         big integer 800M
  SQL> exit

  Therefore, the size of the RAM for the database to which I have connected
  

  rootd2n3v5# ioscan -kfn |grep -i processor
  processor    0  13/120         processor CLAIMED     PROCESSOR    Processor
  processor    1  13/121         processor CLAIMED     PROCESSOR    Processor
  processor    2  13/122         processor CLAIMED     PROCESSOR    Processor
  processor    3  13/123         processor CLAIMED     PROCESSOR    Processor
  rootd2n3v5#

  The one above was the command give the OS level that I don't know what information he gives and what database, since there are 12 databases on this server.
  
  How can I get the CPU information?
  
  And where can I find information for information of system data files, logs, temp, Archive?
  

  <div class="jive-quote">select * from v$version</div>
  BANNER                                                           
  ---------------------------------------------------------------- 
  Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi 
  PL/SQL Release 10.2.0.5.0 - Production                           
  CORE     10.2.0.5.0     Production                                         
  TNS for HPUX: Version 10.2.0.5.0 - Production                    
  NLSRTL Version 10.2.0.5.0 - Production

  Ask the system administrator if the database server is a physical machine, if it is hardware partitioned or created under a virtual machine Manager? Check the operating system utilities. On AIX uname to identify if you are on an LPAR.

  In Oracle, you can query the parameter $ v to cpu_count to see how many cpu Oracle says he sees.

  HTH - Mark D Powell.

• upsert xmltype data xpath - missing something obvious?

  Version: 10.2.0 * 2 * EA
  
  I'm doing a upsert (update / insert) of an xmltype for a given xpath.
  
  The xml data is passed as an xmltype, xpath is a string (varchar2), the new value is a string, varchar2.
  
  If the node specified by the xpath expression exists it is trivial using updatexml; of course if the node is not nothing happens. I can verify the existence of nodes using is node, but I just take off, trying to figure out how to insert the node.
  
  All the APIs I can find who to insert XML (APPENDCHILDXML, INSERTXMLBEFORE, INSERTCHILDXML) do not take an xpath but require an xmltype. Which means that if I'm reading this right I have no other choice to the parse varchar2 string xpath to create an xmltype (ugh!).
  
  I can't find any API that takes an xpath as a varchar2 and a value and gives me an xmltype. Ideally I want same, here an API that returns the XML updated which took the set xpath to update (or inserted if it did not exist) with the new value.
  
  I'm not an XML expert but I'm pretty handy with SQL and PL/SQL. For me this seems incredibly heavy just to do something as mundane as an upsert, so I hope I'm missing something obvious!
  
  Can soemone please put me everything right with a pointer or an example?
  
  On top of the XML uses namespaces, but they are not registered, there is no record of current schema.

  Marco Gralike wrote:
  Could not be done through XQuery, although the version of database doesn't really help...

  It would be possible with a dynamic, but 'painful' XQuery with a static expression expression because it would require parsing the XPath expression and rebuild the entire document of entry with the necessary adaptations.
  I think XSLT would be more effective in this case.

  Perhaps, one day, when the database is XQuery Update Facility, we will be able to do:

  copy $a := $doc/Address
  modify (
    if ($a/zip)
      then replace value of node $a/zip with "12345"
      else insert node element zip {"12345"} into $a
  )
  return $a
  

  user12083137 wrote: for me, from a SQL background, I can't believe this simple case is simply not covered.

  Perhaps not as simple as it sounds. :)

  The feature can be simulated by an IF/THEN/ELSE logic, or a DELETE/INSERT sequence.
  For example:

  case when existsNode(doc, xpath) = 1
    then updateXML(
           doc
         , xpath || '/text()'
         , somevalue
         )
    else appendchildxml(
           doc
         , substr(xpath, 1, instr(xpath, '/', -1)-1)
         , xmlelement(
             evalname(substr(xpath, instr(xpath, '/', -1)+1))
           , somevalue
           )
         )
  end
  

  or,

  appendChildXML(
    deleteXML(doc, xpath)
  , substr(xpath, 1, instr(xpath, '/', -1)-1)
  , xmlelement(
      evalname(substr(xpath, instr(xpath, '/', -1)+1))
    , somevalue
    )
  )