I need help for my DCR-TRV280 appear on WIn7 and save the tape (do not have the disc)

Similar Questions

• Need help with EEM applet 'info type snmp oid' and 'Add' the syntax of commands

  I am trying sample and adding a number of OIDs in the mib/ISDN on 2431 & 2921 boxes.  The number of T1s on the boxes can vary with the model and configuration of the box. I studied the OID I want to loop through and am sure those to whom I need to try, but I can't build the digital oid using the command 'Add' and get the SNMP get command use the result.  Here is my test cmdlet:

  config t

  No test event manager applet

  applet Test Event manager

  event no

  Info action 200 type snmp oid 1.3.6.1.2.1.10.20.1.3.1.0 get-exact type! isdnSignalingGetIndex

  game action 202 j "$_info_snmp_value".

  game action 203 I '1 '.

  game action 204 k '2 '.

  206 action value calls '0 '.

  action 210 all $i lt $j! Browse the ISDN interfaces

  action 215 all 4 $k! Browse calls in & stats connectes.2 &.4

  game action 220 myoides "1.3.6.1.2.1.10.20.1.3.3.1."

  action 222 Add $myoid ' $k$ I ".

  Info action 223 type snmp oid get exact $myoid

  action 224 puts "" myoides = $myoid, i = $i, j $j, k = $k, value = snmp oid = $_info_snmp_value ".

  action 225 regexp ' [0-9] + "" $_info_snmp_value ".

  the 226 if action $_regexp_result eq 1

  227 Add $Calls action $_info_snmp_value

  game action 228 $Calls "$_result '.

  229 action puts 'calls is $Calls. "

  230 action ended

  action 232 increment k 2

  end of the 234 action

  action 240 increment i

  250 action ended

  end

  clear all system event handler

  test run the event handler

  Here is the result when I run the cmdlet:

  bctrunks-2431-2 #event man run test

  myoides = 1.3.6.1.2.1.10.20.1.3.3.1, i = 1, j = 2, k = 2, 2 = snmp oid value

  Calls = 0

  myoides = 1.3.6.1.2.1.10.20.1.3.3.1, i = 1, j = 2, k = 4, 2 = snmp oid value

  Calls = 0

  Here's a snmpwalk on Solaris 10 of the poll server the OID I am trying sample and add

  -bash-3, $00 snmpwalk-v1 - c TWC-default 10.40.209.2 1.3.6.1.2.1.10.20.1.3.1.0

  SNMPv2 - SMI:transmission.20.1.3.1.0 = INTEGER: 2<---- this="" is="" isdnsignallinggetindex="" which="" is="" 1="" +="" last="" isdn="" port="">

  -bash-3, $00 snmpwalk-v1 - c TWC-default 10.40.209.2 1.3.6.1.2.1.10.20.1.3.3.1

  SNMPv2-SMI::transmission.20.1.3.3.1.1.1 = Counter32 : 10

  SNMPv2-SMI::transmission.20.1.3.3.1.2.1 = Counter32 : 10<----- this="" is="" the="" number="" of="" isdn="" outbound="" calls="">

  SNMPv2-SMI::transmission.20.1.3.3.1.3.1 = Counter32 : 2

  SNMPv2-SMI::transmission.20.1.3.3.1.4.1 = Counter32 : 2<------ this="" is="" the="" number="" of="" isdn="" inbound="" calls="">

  SNMPv2-SMI::transmission.20.1.3.3.1.5.1 = Counter32 : 0

  -bash-3, $ 00

  In this case, the cmdlet must obtain the OID 1.3.6.1.2.1.10.20.1.3.3.1.2.1 & 1.3.6.1.2.1.10.20.1.3.3.1.4.1 values and add them.

  The comand 'append' does not seem to be working properly, as indicated by the value of myoides.  The IOS command result search tool for the "add action".

  order does not explicitly say where the result of append it is placed, so I guess that the result is placed in the variable 'myoides' in my test applet.

  I have successfully used the 'action info exact snmp oid get-type type' syntax in the past, but I do not know if it works using a constructed string variable.

  Let me know if you can help me.  Thanks in advance.

  Add use the variable name not its value.  Try this instead:

  action 222 Add myoides ' k $I ".

• Need help for - LifeCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  Trying to get my Microsoft Life Cam HD5000 video work.  He worked until a week on Windows XP there and all of a sudden stopped sending this message

  LifeCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  I uninstalled the program and reinstalled and this notice appears again with this 'mistake' being

  AppName: lifecam.exe AppVer: 3.60.253.0 ModName: kernel32.dll

  Any ideas on how to fix as all drivers are up-to-date and update of the software.   As mentioned he wasn't working a week so there is no idea why the video suddenly stopped.

  Concerned

  Hi Concerned25,

  This problem may occur if you have one of the programs listed below, installed in conjunction with the lifecam.

  Earthlink total access.

  Venturi VClient

  Nero

  Studio9 Pinnacle systems software

  F-Secure internet security

  Dell Web cyber coach

  AOL or Yahoo toolbar

  FixIt utility.

  To solve this problem and find workarounds, see the link below.

  http://support.Microsoft.com/kb/953692

• Need help for import that were previously imported photos and then deleted

  I am trying to import a few photos that I initially imported... then deleted (off the coast of LR and my HDD + remove my trash). LR says already imported photos, but I know for a fact that they have been deleted and I want just their reimportation. Is there a way to get around this? IMO

  If you erased them from your computer by using your browser in the system, then Lightroom perhaps even previews of the files. Did you remove them from Lightroom using Lightroom?

• I need help for my laptop to stop, he is frozen on the page "shutting down".

  I have a dell laptop inspiron 1520 with Windows Vista Home Basic Edition.  My mother downloaded the program Picasa on it last night, and since then it will not be closed.  I don't know if downloading caused a problem or what's happening.  I tried CTRL ALT DELETE it who did nothing, I pushed the power button on repeatedly, shut down the computer to see if it would be closed.  I disconnected to see if it would be fair to the battery and reboot, but it will take about 4 hours and I don't know if that will solve the problem or not.  I threw the computer, as with an old computer, I have had there is a tiny stick you could put a pen in and restart it, I have find a Plug and put a pen... He did nothing.  If anyone has any ideas, I would really appreciate it.  I don't know much about computers.   Thank you very much. -Jen

  Unplug it of the plug, turn it over and find the battery latch. Remove the battery. If he stops.

• Need help for optical safety circuit.

  I buy these parts and prototype with real components, but since I multisim, I thought it would be nice to create the circuit and maybe work through issues I can practically.

  I need a circuit that takes 120 VCA, generates 5 VDC and 1.5Vdc power of optical transmitter and receiver.  I actually use a data port because he has great range and is pretty cheap.  Rather than send the binary code well I just send a light stead that is broken or not broken through doors and windows in my house.  Then the receiver sees this as an entry and order a relay.

  I tried several voltage regulators that come with multisim, but I get an error of execution of my circuit.  Really I can't the 120 VAC to power levels necessary for the functioning of the optics.

  Otherwise I might want to run on a system 120Vdc with battery backup, so throw a 120Vdc up to 20 v DC switching power supply - but I have not found a SMP in the library which takes 120 as input and as output 20.

  Basic plan: 120VAC source-> transform to 24Vac-> Full bridge rectifier to ~ 20 v DC-> voltage capacitor filter on the input of two voltage regulators (1 to 5 VDC, 1 to 1.5Vdc) - then circuit since the two power supply of the transmitter and the receiver.

  I just need help for 5V and 1.5V, from there, I know that the real world circuit will work component tests already carried out.  Thanks for reading.

  I didn't Multism so I can't advise you on the compatible models. I ran the model on semiconductors with slight modifications of format on my SPICE simulator based on Berkeley Spice 3f5. I had to change the format of model resistance semiconductors appeal but has not changed any values.

  The output of your power supply circuit 3 (with 5 V, not the 1.5 V regulator regulator) was 4.99995 V.

  There are a few messages about changing templates published for compatibility Multisim woth. You can search those to see if there are any suggestions on what you'll need to fix in the model.

  Lynn

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I need help for activation of the real administrator account.

  I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.

  I need help for that.

  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Read the above info.

  See you soon. Mick Murphy - Microsoft partner

• I'm at school and only paid help for my adobe membership. I can't do the cloud to download to my new computer, I had only a front tray. Now, I need this software on my new computer and can't figure out how to download or if I have where it

  I'm at school and only paid help for my adobe membership. I can't do the cloud to download to my new computer, I had only a front tray. Now, I need this software on my new computer and cannot figure out how to download it, or if I where it is, or anything. I'm a person who needs to be talked through things so I can ask questions and get the responces immedent that I'm not good with typing and reading.

  Restart the computer and try again.

• I need help for my reader to USB drive on my windows 10 ACER?

  I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?

  What Adobe application that you use?

  This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.

  Thank you

  Regalo

• Hello, I need help for cancel the payment on my adobe account.

  Hello, I need help for cancel the payment on my adobe account. I'm from Peru, Im paying a monthly fee as a student. Help, please...

  Cancel your membership creative cloud

• Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hey ihorl18351266,

  Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.

  Kind regards

  Ana Maria

• I need help for VMWare WS 8

  Hello

  I'm about to evaluate VmWare workstation 8 but immediately ran into a problem where I simply can't find an answer or a clue how I can possibly create a virtual machine, as described below. As I am trying to provide as much as possible for what I intend to create, please bear with me for the description below might be a bit long:

  1. I'm migration of Windows XP 32 bit on a machine Intel Core2Quote 9400 to Win7 64 bit on an Intel Core i5 2500 K PC processor.

  2. among all the possible VM that I might want to create with VMWare 8, one of the very crucial VM that interests me is a WinXP BACK (i.e. MSDOS ver 5.5) like the one I get when I open a fullscreen WinXP DosBox.  i.e.
  (a) I want to launch my new PC with Win7 64 bit.
  ((b) in the Win7 as indicates it a) above, I want 8 WS VMWare to run a virtual machine, which is essentially an MS-DOS 5.5 environment.
  
  3. Thus, it is possible for me to create a virtual machine such as in 2. (b) above? How do I create that? i.e. for 2.b) above, I don't want any Windows XP, I just need his full-screen DOSBOX.

  Moreover,.
  Is it possible to run a virtual machine MS-DOS 6.22, is there than a fact easily MSDOS 6.22 VM that I can import into my VMWare 8? I don't think I'm able to find my old MSDOS 6.22 floppy, even if I can, I do not have a disc torrent with my new PC...

  to start a machine virtual without EFI-Bios from USB you must boot from a Plop - bootmanager.iso first - then once the Plop bootmanager has started you can let him call the USB device.

  The problem with this approach - you may need to run a few times - often the USB device only will start with a USB 1 speed during the first attempt

• Need help for life!

  I want my life to = 0, it goes to the end screen.

  I enter this code to my layer "score":

  If (lives == 0) {}

  removeMovieClip (face);

  gotoAndStop (5);

  }

  You need to do things in terms of targeting, agree and if the function checkLives() lives in another scenario, you must target this another timeline during his appeal...  I don't know what is your program installation/hierarchy, but you seem to use _root to things of the target.  If this function is not on the _root timeline, then you need to adjust things to it as well.  Unfortunately I can't tell you how you have things set up, it's something you know now, so I can't tell you how to properly target things.  At this stage, I can only present the concept, and it is up to you to work to tie things together.  The code works, you just need to understand how you should implement.

  If the function is too much for you to solve, maybe you can try buildiing code where you change the life rather value...

  If (this.hitTest (_root ["glad" + i]) & .dead _root ["happy" + i] == 0) {}

  _root.score +=-5;

  _root. Lives = _root.lives - 1;

  If (_root. Lives == 0) {}

  _root.removeMovieClip (face);

  _root.gotoAndStop (5);

  }

  _root ["Glad" + i] .gotoAndPlay (2);

  }

  I don't know if you use _root in what I have just shown applies to all cases, so I used it

• Error - "Launcher requires the write permission for World of Warcraft key to locate and launch the game successfully. Please turn on write access to the registry key with the help of an administrator account"

  Original title - edit registry of the world of Warcraft Launcher to write

  I downloaded the patch more recent game in my computer, I did a cleanup of the system and tried to log in again, but now the States window it "(Launcher requires permission in writing for World of Warcraft key to locate and launch the game successfully." Please allow write access to the registry key by using an administrator account)", how can I access the registry to resolve this problem? Help please

  Hello DaTurtle !

  I had exactly the same problem, I have not found the sollution here...

  But I found how to fix very easy !

  You do a right click on the WOW icon at the office-
  then browse to the location of the file -
  It will appear a lot of files-
  Click on the WoW program file instead of the pitcher-
  will start your wow game-
  Log in as normal-
  then he will come to the top to update...

  After the update your wow will work as usual!

  It worked on my computer, please respond!

  Hans_Craft