Ask for extra help - tagging?

There are moments when one knows another poster would be able to solve the problem or at least throw a few more trouble light line when the first shot of options is exhausted

Is there a way of marking using top displays another the @ function? Or we rely somewhat on the luck for the expert to notice the thread and chime?

I fully understand the opinion of everyone here is a volunteer and donated their time and expertise - this is not intended to impose on any of their generosity and benevolence but perhaps a little nudge in the sense of "If you're here at some point - could you please take a look at...» »

Is it still possible?

Thanks for any idea

Once you have enough points to reach the living room you can post a thread, ask for help from another Member of salon, assuming that they frequent the area. You can also check the activity of the Member that you are talking about and find a thread that they participate and post here with a link. As you would expect, there is no way to mark anyone.

Tags: Using Support Communities

Similar Questions

  • URGENT! Nice day. I want to cancel the tariff for monthly payments that will be automatically withdrawn from the account today. Yesterday set a new annual rate. Asking for your help.

    URGENT! Nice day. I want to cancel the tariff for monthly payments that will be automatically withdrawn from the account today. Yesterday set a new annual rate. Asking for your help.

    Hi Agataa,

    Please refer to cancel your Adobe Creative Cloud membership

    Feel free to contact customer service if you have additional questions.

    Kind regards

    Shelly

  • Hello, asking for ideas/help for high vi.

    Hello, excuse my rookieness lol.  Just, I acquired my CLAD certification and began to get wet feet.

    With all of your experience, I was wondering what you might think, this is the best way (read simpler) to create a vi that is a simple drop-down menu to launch the other vi who have created.

    I have 6 operating modes which are supplemented by an experienced developer and I would like to be able to call on any of those through a master vi.  I know that it is a question of annoying n00b, but for any help or suggestion would be greatly appreciated.

    I guess you're talking about, you can use these other screws as subVIs in VI Launcher.

    Do you agree with them just appearing as a popup? You want to be accessible at the same time? Do you need information out of the screw after having completed?

    If you don't care that the subVIs after they launched can make an call and Forget using the reference of VI. If you want to wait before the end of the VI, you can call it as a Subvi, and this means that the Launcher will be glued on this call Subvi until you are finished.

    As far as the interface goes, you could just do something simple with a structure of the event and a selection option:

  • I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers.

    * Original title: drivers

    I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers. help please?

    What drivers?

    Your hardware such as a video card may require pilots. Only you know what is in your version of the computer.

  • update failed opinion said: something is trying to trick firefox by accepting a security update. Please, contact your network provider and ask for help. help please

    What is the solution to this issue - is there one that will not make my eyes roll back in my head? What is a true message from Firefox?

    the popup looks like this:

    [firefix logo] Software update

    Update failed

    Something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help

    Whenever you get a message / popup that software / files must be updated.

    DO NOT USE ONE OF THE LINKS PROVIDED.

    If this can be a legitimate message, could also be a Virus or Malware.
    No matter when you want or need to check updates.
    Go to the website of the real owner of the program in question.
    For example, for Firefox, go to Mozilla.org
    or Firefox in any language.

  • Something tries to trick firefox by accepting a security update. Please contact your network provider to ask for help.

    The warning came after connecting to the internet.
    Something tries to trick firefox by accepting a nonsecure update. Please contact your network provider to ask for help.

    This problem may be caused by the presence of remains files in the program folder Firefox (defaults\pref) as a file firefox.js which replaces the URL of update with a wrong link.

    Do a clean reinstall and do not forget to remove the Firefox program folder to delete files that are the problem.

    See also:

  • I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. »

    I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. "Do you know what is happening here - what could be the problem? (I have the latest version of Firefox already installed. I previously got Firefox error messages indicating "Firefox update failed". However, I already have the latest version of Firefox installed when I got these error messages.)

    I think that we must hope that the problem will be resolved at the present time. If you see the error message again post in this thread. Also, it would be unusual get this message while trying not to update, but if you get if you try to copy and paste the details of console error that they can be useful.

    Use

    • keyboard Ctrl + Shif + J
    • or button-> Web Developer Firefox-> Console errors

    This kind of message is apparently the only normally expected when you try to update to Firefox. It seems strange that you get the message using a 'Œuvres' document, but others have reported this message seemingly random incidents.
    (So normally, you must clear the error console, and then try to update knowing the error messages have been the result of this attempt to update)

    If I had this problem my concern would be that some kind of malware may be involved, but the message can then indicate that all this malicious program is upset.

  • Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

    Had sent the message about the Blue error screen.

    Has been asked for more details.

    I hope this helps.

    BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

    BCP3: BF90DB41 BCP4: 00000000

    OSVer: 5_1_2600 SP: 3_0 product: 768_1

    Hi VASANTHFERNANDES,

    ·         You did changes to the computer before the show?

    ·         When exactly you receive the blue screen error?

    ·         What is the full error message?

    Follow these methods.

    Method 1: Disconnect all external devices and check if the problem persists.

    Method 2: Start the computer in last known good configuration and check.

    How to start your computer by using last good known Windows XP Configuration

    http://support.Microsoft.com/kb/307852

    Method 3: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 4: Follow the steps in the article to check the drive for errors.

    How to perform disk error checking in Windows XP

    http://support.Microsoft.com/kb/315265

    Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

    For reference:

    Demystifying the 'Blue Screen of Death'

    http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

  • Always ask for help.

    I have asked for help but received none. I have an e machines T6520 in and all of a suddenn I have no audio device. I have no idea where it went and how to get it back. I went to the website of machines e and downloaded audion drivers, then I extracted the file now what I'm doing and that will fix it? Please please some can help me.

    Go here:

    http://support.gateway.com/us/en/EMAC/product/default.aspx?tab=1&modelId=1645

    Download the file and save it to your hard drive.

    Make a new folder somewhere and unzip him compressed file you donwloaded inside.

    Double-click setup.exe to install. Follow the instructions on the screen.

    See you soon,.

    Jerry

  • How would enable remote desktop connection and asking for help?

    How would enable remote desktop connection and asking for help?

    Do you mean on this site?  Sorry, but we don't do that.  We do not have the software required to make the connection (it's too expensive to buy personally) and even if we did we would not get in this practice.  We work by display.

    If you mean for someone else to help you, here is the procedure: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Hoax call on notifications about a virus tries to hijack your computer and ask for help to remove the files?

    OT: security.

    Dear community,

    Did anyone out there contacted by "windows" say you they receive notifications about a virus tries to hijack your computer and ask for help to remove the files? Initially, it was an area code 855, but now the number is unavailable. I get a lot of calls.

    any help would be appreciated

    Thank you

    Hello

    It's a scam.

    Here are the tips that we regularly give the posters who receive these types of calls:

    We have all the errors and warnings in our Event Viewer

    Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

    You are the only person who knows if you gave them remote access.

    If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

    If you use your online credit card, cancel and get a new one issued to you.

    And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

    There is an article in the link I'm you provide at the end of this one

    Read this Information from Microsoft:

    "Avoid scams to phone for tech support.

    http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

    Don't be fooled of unsolicited calls. Don't provide personal information.

    Here are some of the organizations that cyber criminals claim to come:

    • Helpdesk Windows

    • Windows repair center

    • Microsoft technical support

    • Microsoft technical support

    • Windows Support Group Technical Department

    • Microsoft Research and Development Team (team of Microsoft R & D)

    See you soon.

  • ask for help, I had to cancel a package of adobe Illustrator in this Bill at all. Please help me

    ask for help I had to cancel a lot of Illustrator from adobe in this Bill at all. Please help me

    Hello

    Please refer to cancel your Adobe Creative Cloud membership

    Incase you still need help please contact the support.

    https://helpx.Adobe.com/contact.html

    Concerning

  • I can't install my AD018640672 order number because you ask for the previous issue. Adobe came with my computer I don't have that. Can you help me!

    I can't install my AD018640672 order number because you ask for the previous issue. Adobe came with my computer I don't have that. Can you help me!

    Hi bobj39626549,

    We could certainly help you.

    If she asks for the previous version number, then you could acquire a version upgrade.

    You must purchase the full Acrobat version so that it can be installed and activated with the serial key.

    Hope that helps.

    Kind regards

    Ana Maria

  • I'm so frustrated!  I have CS5 Master Collection.  I want to UPGRADE to CS6 Master Collection.  I want to be on the cloud!  I can't find where to put up-to-date or any CONTACT to ask for help.  It shouldn't be this hard.  HELP Please!

    I'm so frustrated!  I have CS5 Master Collection.  I want to UPGRADE to CS6 Master Collection.  I want to be on the cloud!  I can't find where to put up-to-date or any CONTACT to ask for help.  It shouldn't be this hard.  HELP Please!

    See the link below:

    Creative Suite 6

  • Creative Colud doesn´t work and ask for re-instalation. Could you help me?

    I installed Creative Cloud Deskstop and after intalled Ligthroom and Photoshop, so when I stop or revive the work of doesn´t W8.1 Colud Creative and ask for re-instalation. Could someone help me?

    Gustavo, could you please share the exact message that you have found so that we can help you properly.

    In the meantime, here's what you can try:

    1. Delete creative cloud app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    2. Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

Maybe you are looking for

  • Deactivation of the system, Hp pavilion g6

    Then my brother set bios password of my computer hp laptop pavilion g6 and password forgotten... I tried to guess, but it says 'disabled system' now I get only white screen when starting my laptop... But I can open "bios setup" I got the code when I

  • My Y510 does not recognize my new Linksys WPC600 Wireless-n laptop notebook adapter

    Product information I put in the card and that it snaps, but he seems safe in there. It can easily be removed. He feels like he doesn't have all the adapter. When I insert it, Vista doesn't recognize or recognize it. The Y510 accepts only a certain t

  • Internet keeps hanging up when idle

    I have XP with SP3. If I don't use internet for a while, it automatically stops working (until I reboot) and it does connect almost anything - that if I try to repair the connection, or disconnect and reconnect my USB wireless stick etc. How can I fi

  • my instant chat where now that I have the new yahoo Messenger

    iI can't find my chat window now that I have the new version of yahoo messenger.

  • Desktop to large for my monitor screen

    original title: screen size is great for my current screen. I have vista and this problem started on two__weeks there. I'm tired of moving the screen to see. This used to be easy to fix, __but I can't find in Control Panel. See above