My Y510 does not recognize my new Linksys WPC600 Wireless-n laptop notebook adapter

Similar Questions

• My adapter does not recognize the new (oem) battery in my laptop

  I have a laptop dell inspiron 1545 that is 2 years old. I ordered a real Dell 9 cell replacement battery because my old one would not hold a charge for a long time. When I replaced the battery... that is when my problems began. Now... I see plugged supported and sometimes there's some time a message that says that the power adapter is not recognized and sometimes he'll say... said... trendy... do not load. If anyone knows what I could check I'd appreciate any help. Reference Dell tells me I need a new motherboard... but... I say NO

  Hello

  Well there may not be any answer, but maybe this will help you:

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• ITunes on my old MacBook Pro does not recognize my new Iphone

  ITunes on my old MacBook Pro does not recognize my new Iphone... but apparently I can't download the new version of Itunes to this model of MacBook Pro? (according to the message that I get)... So I can't transfer my photos / apps / data, etc., for my new phone... Does anyone have advice?

  Thank you

  It is not so much the Macbook Pro model as what operating system your help, for example, if you're running Lion and trying to download Itunes for El Captian. Impossible to run your operating system which. Updates for your system come from apple. Ether through a software update or the Apple app store. Generally, you will receive a notification if an update is available. What operating system you're running and what Iphone model? IPhone 6plus has for example need OS 10.7.5 or newer.

• Epson sx438w does not recognize the new ink cartridge

  Epson sx438w does not recognize the new ink cartridge, when change original are

  Contact Epson.  This isn't a problem of Windows or Microsoft.  They should be able to help or offer troubleshooting instructions.

• My computer does not recognize my new printer HP Deskjet 3054 A J611

  my computer hp with windows xp does not recognize my new hp deskjet printer j611 3054a. It is supposed to be wireless and is connected to my router but there is no way the station will be operated wirelessly.i tried the instruction booklet and other tips, but nothing helped.

  Router connections generally need to be configured in "internet connection".

  Properties. Or try to open "printers" in the Panel, xp need address

  Properties to connect. In addition, wireless technology, blue tooth, etc., done years of

  perfection, the tech just has not been developed yet...

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• My HP Deskjet 5740 printer does not recognize my new HP Photocartridge 348

  My HP Deskjet 5740 printer does not recognize my new HP Photocartridge 348. It is brand new, not expired, official but I only get black prints. I can't find anything useful on the HP support site. The printer is not set to only print in black.

  The cartridge goes in the slot for cartridges of blacks, there is no colourcartridge in the other location at this time. So either he needs a color cartridge to work together (but how to know I'm not only to print my photos with the colourcartridge and using the photocartridge as a black cartridge cheap?) or the printer believes that the photocartridge is just one other black ink cartridge.

  Any suggestions?

  The Photo cartridge has not all the colors, Photo black, cyan and light magenta.  It is used in conjunction with the color cartridge (which feeds the cyan, magenta and yellow) for photo printing.

  If you want to print in color, you will need a color cartridge.  The color cartridge can print in black (approximately) by itself, but the photo or black print cartridge cannot print without the color cartridge color.

• Thunderbird does not recognize my new Verizon smpt settings and I can not send e-mails. Help!

  I tried to change my setting smpt for the new setting to verizon, but when I try to send an email, I get a message that Thunderbird does not recognize the smpt.verizon.net as a framework smpt.

  It's smtp.verizon.net. You must correct your typo fault.

• Why my iMac does not recognize my new iPhone 6?

  I have a new iPhone 6. When I plug it into a USB port on the back of the iMac, it does not recognize the phone. What can I do to fix this?

  Hello. Try methods of troubleshooting here: If iTunes does not your iPad, iPhone or iPod - Apple Support

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• ITunes does not recognize my new 6 iPhone

  My first iPhone 6s and I installed itunes on windows 10, but now when I plug my phone with my computer does not recognize my device, but I see the phone is charging and I can see the memory of the device to the computer.

  But does not appear I tunes.

  Hi Mr. Amjad,.

  Congratulations on the purchase of your new iPhone 6 s!  If your iPhone is not recognized by iTunes on your PC, try the troubleshooting steps in the resources below.

  iPhone, iPad, or iPod not recognized in iTunes for Windows

  Take a look at the iPhone user Guide for a guided tour of your device, including services such as Apple's music and iCloud to access your music, contacts, calendars, photos, etc., directly from your iPhone.

  The iPhone to iOS user guide 9

  Take care

• OfficeJet 6600 does not recognize my new HP Pavilion windows 8.1 for scanning

  I have a HP Officejet 6600 networking with my new HP Pavilion windows 8.1 it prints fine but does not recognize my computer when I want to scan. Whenever I want to scan a document to my computer I have to run Scan doctor. I called tech support and they can't help me because my printer is no longer under warranty as I bought it December 2012. but my office was purchased November 2013. They said that it is clearly a problem with the printer and not on the computer. They won't even talk to me or answer my questions without fees being paid first.  The scanner recognizes my laptop and desktop to the husband who have vista and 7, respectively. But I don't understand why it will print without difficulty and habit of scanning.

  Hi leila1964,

  Welcome to the Forums of HP's Support.

  I want to offer a helping hand with the 8.1 of Windows not scanning with your HP Officejet 6600. When you run the HP print and Dr. Scan on the computer it says it fixes some thing or that it cannot fix what whether?

  Given that the printer works on the other two computers (Vista and 7), the problem is with the WIndows 8.1. I want to uninstall the printer software and the HP printer install wizard makes sure that we get the newest software possible.

  Let me know how it works.

  Thank you

• C4385 does not recognize the new router

  Just changed internet service providers.  Although I used this vendor before and not had any problems with my printer, I now have a problem.  My C4385 will not recognize the new network.  Hp network connection software that I run has no effect.   It will not detect a network even if my computer shows an excellent connection to the network.

  When I run the wireless network test report it shows "FAIL" next to "Network Name (SSID) Found."  The recommendation is to "check that your HP printer (SSID) name exactly matches your name (SSID) wireless router.

  I am completely baffled by the present.  I've seen other questions that are similar to this, but none that refer to my model exactly.  Any help is appreciated.

  Please, try the following:

  1. disconnect the USB cable from your printer

  2. make sure to delete any previous copies of your HP printer from the printers (in Control Panel) screen

  3. restart your PC

  4. under the printers screen, enter the following print server properties screen:

  XP: File > print server properties

  Vista: right click on the area of the screen information, and then select run as administrator > print server properties (law as Administrator option will not allway appear)

  Win7: Select any other printer in a left click and you will see the properties of the print server to the Menu bar top

  On the Ports tab, be sure to remove any existing TCP/IP port.

  5. remove temporarily disable your firewall software

  6. start the installation and select reconfigure the network connection / add a device.