Ask for others in OIM 11 g R2 PS3

Similar Questions

• Downgrade to XP (CQ61-403SA) - ask for other Sata drivers

  > When AMD Sata drivers that are presented in the guide not work for then start you ' new message ' on our forum to ask some other drivers Sata for this chipset. Please write there what drivers you used and give information out there about your p/n too.

  Hello

  I'm trying to downgrade my CompaQ CQ61-403SA to XP in order to use a piece of software that we use in the office which is XP only.

  I followed the instructions here to create a disc to start xp for my AMD chipset:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x000000...

  the problem is that the laptop won't boot from this drive (I reorganized the sequence of boot on the computer laptop. it will say "Press any key to boot from the CD"... and when I do it will pass temporarily to a CompaQ red screen before coming back to the same message "Press any key to boot from CD")

  additional information in the CPU - Z program:

  Motherboard:

  Hewlett-Packard

  Model:

  363 42,15

  Chipset: AMD 785GX Rev:00

  Southbridge: AMD ID439D

  BIOS:

  Version: F.13

  Date: 25/01/2010

  Any help would be appreciated.

  1. In Nlite, choose Insert -> multiple driver folder option
  2. Select ONLY x 86 driver for AMD SATA AHCI when asked if you are using a windows xp 32-bit cd
  3. Never choose x 64 driver when asked if youre 32-bit installation cd...

  Click on the star to say thank you...

  Click on accept as solution if my answer has solved your problem

• I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  You have to ask Apple why the design has changed. You should still be able to delete songs by changing your selection of synchronization and synchronize.

  Or you can delete songs directly on your iPad and other iOS devices, directly in the music app or via settings > general > storage & use iCloud > storage management > music

• Thunderbird, constantly asking for passwords by e-mail

  Thunderbird has worked for years OK but recently decided to ask for passwords of e-mail, and then ask again, several times, even though I told it to remember using pw Manager. When pw is given, he just keeps asking until I have abandon. Receives emails from Gmail, but I can't send Tbird. No problem with gmail itself as I can connect directly and send and receive mail, but then I get a message from gmail on Tbird telling me that I just connected via my browser. All very disappointing.

  most common cause defective or reach products anti antivirus.

  Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.

  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

  The other option is that your provider has changed the parameters required to connect.

  Please add the troubleshooting information to your post
  To find troubleshooting information:

  • Open the help (or click Help three-line-icon and select)
  • Choose troubleshooting information
  • Use the copy button in the Clipboard to select them all. Do not check box "include account names!
  • Paste this into your post.

  Please post back with that information and any other questions you may have.

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• http authentication fails on all sites, don't ask for user/pass

  Hello

  After an update of apt - get, sites that use HTTP authentication do not ask for credentials and go directly to HTTP:401. It only affects this browser, others have no problems. I've also updated a FF in Windows, no problem there after the update.

  See https://developer.mozilla.org/en-US/Firefox/Releases/30/Site_Compatibility#Security for details and workaround.

• Apple Mail keeps asking for password and won't accept it.

  My iMac mail keeps asking for the password for one of my email addresses.

  The address is... @hotmail.co.uk, when I enter the password it doesn't recognize it and declare it invalid.

  Moments later, the mail is delivered.

  A month ago I had the same problem which at any mail arriving. I tried many things and finally put in place a new internet/mail account in preferences. So, after having removed the old settings and reinsert the it worked, until today.

  I have 2 other addresses of e-mail which are not affected by this bug.

  This happened only since I changed to El Capitan.

  Your email provider may reject your password for several reasons, including:

  • You do not use your current e-mail password. If you updated the password on another device, make sure you use the same password on this device.
  • Your email provider needs you to update or reset your password for security reasons. For example, if you have turned on googles two step of checking your Gmail account in Mail now requires the appropriate password app.
  • Your disabled email provider or suspension of your account. Your provider of e-mail for help.

• Firefox keeps asking for exceptions of security for many Web sites after the reset of the browser after Yahoo hacked my search engine toolbar

  Yahoo has hijacked my search bar where I could not find anything other than this site. I reset Firefox and now MANY sites continue to ask for a security exception. At amazon, gmail, google, and every google search. Even after that I confirm my exception of gmail security, gmail messenger does not work and my photo on my gmail theme model. I removed the cert8 and certoverride files in my profile. I also SSL and TSL checked under Option > advanced > encryption. Help, please. I want to use Firefox.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox and all the leftover program files and then reinstall Firefox. Please follow these steps one by one:

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click Exit in the file menu or Firefox) and confirm all future messages.
  3. Now, uninstall Firefox by following the steps mentioned in the article to Uninstall Firefox .

  IMPORTANT: Under Windows, the uninstall program has the option to remove your personal data and settings. Make sure that you have not check this option. If not all of your bookmarks, passwords, extensions, customizations and other Firefox data user profile will be removed from your computer.

  After uninstalling Firefox on Windows, delete the folder of the program "Mozilla Firefox", located by default in one of the following locations:

  • (Windows 32-bit) C:\Program Files\Mozilla Firefox
  • (On 64-bit Windows) C:\Program Files (x 86) \Mozilla Firefox
  1. Go to the Windows Start menu and click on 'computer '.
  2. In the Explorer window that opens, double-click on disk Local (c) to open the C:\ drive.
  3. Find the folder "Program Files (x 86)" or "Program Files".
     • On 32-bit Windows, double-click the Program Files folder to open it.
     • On 64-bit Windows, you'll see a folder "Program Files (x 86)" AND a "Program Files" folder. Open the Program Files (x 86) folder.
  4. You are looking for a folder of Mozilla Firefox . If you find one, right click and select delete and confirm that you want to move the folder to the trash.

  Now, go ahead and reinstall Firefox:

  1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
  2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• El Capitan always ask for an authorization or passwords!

  Hi all.  I just used most recent iMac, mid-2011. 27 "i5 2.7, ram 4 GB, 12.2, first use

  El Capitan of Snow Leopard.

  So frustrating that almost every simple task I want to do, I have a

  Authenticate or enter the user name and password. EG just to move a file in

  a folder, or in the trash.  In addition, either after just want to move a file, copy it

  It is!  I guess it's a problem of user group; I tried disk utility, found

  No permissions problem, don't know what to do.  This isn't the Mac I have

  known and used since 1990!  Thanks for any help, Bob, prisoner of El Capitan.

  Before purchasing a used computer, you must have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.

  The first thing to do after the acquisition of the computer is to wipe the internal drive and install a new copy of Mac OS X. You - not the original owner, must do. Changes made by Apple over the years have made this very complex seemingly simple task.

  How would you do it depends on the model, and if you already have another Mac. If you are not sure of the model, enter the serial number on this page. Then, find the model on this page to see which version of the OS was initially installed.

  It is dangerous and may be illegal to use a computer with software installed by a previous owner.

  1. If you do not have another Mac

  a. If the machine comes with OS X 10.4 or 10.5, you need a Snow Leopard install disc (OS X 10.6) retail boxed and "Shrink Wrap" on the Apple Store or a reputable dealer - no eBay or something of the sort. If the machine is very old and has less than 1 GB of memory, you need to add in order to install 10.6. Preferably, install as much memory can take, according to the technical specifications.

  (b) if the machine comes with OS X 10.6, you need the installation media that accompanies it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media of the original owner, but if you do not, order replacements from Apple. A disc at retail, or the gray discs of another model, will not work.

  To start from an optical disc or a flash drive, insert it, and then restart the computer and hold the C key to start ringing. Release the button when you see the gray Apple logo on the screen.

  c. If the machine comes with OS X 10.7 or later version, you don't need media. It should start in the mode of Recovery of the Internet when you hold down the key combination option-command-R to start ringing. Release the keys when you see a spinning globe. Note that Mac Pro models turn over end of 2014 (with the box of "cheese grater") cannot use Internet recovery, regardless of what version of OS they shipped with. The Mac Pro round (2014 or later) can use it.

  d. some models 2010-2011 comes with OS X 10.6 and received a firmware update after 10.7 was released, allowing them to use Internet recovery. If you have one of these models, you cannot reinstall 10.6 even from the original media, and recovery of the Internet won't work either without Apple ID of the original owner, in this case, contact Apple technical supportor take the machine to an Apple Retail Store or other authorized service provider to have an operating system installed.

  2. If you do not have another Mac

  If you already have another Mac which has been upgraded in the App Store to the version of Mac OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use the recovery disk wizard to prepare a USB device, and then starts the new Mac of it by pressing the C key to start ringing. Alternatively, if you have a backup of OS X Time Machine 10.7.3 or later on an external hard drive (not a time Capsule or other network device), you can start by holding down the option key and clicking in the row of icons that is displayed. Note that if your other Mac has never updated in the App Store, you can not use this method.

  3 partition and install OS X

  a: If you see a lock screen trying to boot from the support installation or recovery mode, then a firmware password has been defined by the previous owner, or the machine was locked remotely via iCloud. You will need to either contact the owner or by the machine to an Apple Retail Store or other provider of service to be unlocked. May asked you proof of ownership.

  b. launch disk utility, and then select the internal drive icon - no volume icons nested beneath it. In the Partition tab, select the default options: a partition table GUID with the volume of data in Mac OS extended (journaled) format. This permanently deletes all existing data on the disk.

  c. an unusual problem can occur if all the following conditions apply:

  OS X 10.7 or later version has been installed by the previous owner

  The boot volume has been encrypted with FileVault

  You start in recovery mode (that is, not of a 10.6 disk installation)

  In this case, you will not be able to unlock the volume or partition the drive without the FileVault password. Ask for advice or see this discussion of the CSA.

  d. after partitioning, quit disk utility and run the OS X Installer. If you install a version of OS X was acquired from the App Store, you will need the Apple ID and password you used. When the installation is complete, the system reboots automatically in the Migration Wizard, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have all the data to be transferred, it is usually the best time to do it.

  e. run the software update and install all available Apple system updates. To upgrade to a major version of Mac OS X newer than 10.6, get it from the Mac App Store. Note that you can not keep an improved version that was installed by the first owner. He or she cannot legally transfer to you, and without the Apple ID, you will be able to update in a software update or reinstall, if it becomes necessary. Is the same for all App Store products that the previous owner installed, you will need to buy.

  4. other issues

  a. If the original owner "accepted" bundled iLife (iPhoto, iMovie and Garage Band) applications in the App Store so that he or she could put up-to-date, IRREVOCABLY linked to that Apple ID and you can download them without having to buy them. Reportedly, the Mac App Store Customer Service sometimes issued codes of reimbursement for these applications to second owners who asked.

  (b) if the previous owner has not Deauthorize the computer in the iTunes Store under his Apple ID, you will not be able to authorize immediately under your username. In this case, you will have either to wait up to 90 days or contact iTunes Support.

  c. When you try to create a new iCloud account, you could get a failure message: "Account limit reached." Apple imposes a limit of life of three configurations by device iCloud account. Erasure of the unit does not reset the limit. You can always use iCloud account that was created on another device, but you will not be able to create a new. Contact iCloud Support for more information. Configuration limit does not apply to the Apple ID accounts used for other services, such as iTunes and Mac App Store or iMessage. You can create as many accounts you want.

• Applications such as Firefox and Pandora, do not recognize that I have updated to v 9.0.1 of Firefox, even though that I have updated to him twice. What can I do for other applications to recognize that I use Firefox 9.0.1?

  I've updated to Firefox 9.0.1 twice. I still get messages from Firefox and Mozilla among others asking me to upgrade to the latest version of Firefox so that my system works. When I do help > about Firefox, it shows that I'm using version 9.0.1. What additional steps are needed for other applications, including Firefox, to recognize that I am using 9.0.1 version?
  Thank you.
  Rory

  Your user agent is corrupted by the Fast Browser Search (FBSMTWB) that identifies you as Firefox/3.5.7

  see your user agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.1.7) Gecko/20091221 Firefox/3.5.7 FBSMTWB

  reset the user as mha007 above answer agent

  See also these pages and discussions on Fast Browser Search (FBSMTWB in the user agent).

  http://help.fastbrowsersearch.com/

  http://www.pccybertek.com/2009/05/remove-fast-browser-search

  Thank you

• Problem restoring last Session in Firefox. It restores the last session without asking for password

  whenever computer stops because of the cut to the top or any other reason while you work in Mozilla Firefox as the use of Facebook. When you turn on the computer and open Firefox it stores the session, without asking for password or username that the effects seriously privacy.i has been using Facebook on Mozilla and my computer shuts down after a few minutes, another has turned on the computer and it went into my account on Facebook because of the last session of restoration. Please, do something about it. This is a larger problem in Firefox

  You can set the browser.sessionstore.privacy_level pref 2 (never) or 1 (no HTTPS, default in the Firefox 3 versions) on the topic: config page to disable the registration of cookies via session restore.

  • http://KB.mozillazine.org/browser.sessionstore.privacy_level

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. »

  I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. "Do you know what is happening here - what could be the problem? (I have the latest version of Firefox already installed. I previously got Firefox error messages indicating "Firefox update failed". However, I already have the latest version of Firefox installed when I got these error messages.)

  I think that we must hope that the problem will be resolved at the present time. If you see the error message again post in this thread. Also, it would be unusual get this message while trying not to update, but if you get if you try to copy and paste the details of console error that they can be useful.

  Use

  • keyboard Ctrl + Shif + J
  • or button-> Web Developer Firefox-> Console errors

  This kind of message is apparently the only normally expected when you try to update to Firefox. It seems strange that you get the message using a 'Œuvres' document, but others have reported this message seemingly random incidents.
  (So normally, you must clear the error console, and then try to update knowing the error messages have been the result of this attempt to update)

  If I had this problem my concern would be that some kind of malware may be involved, but the message can then indicate that all this malicious program is upset.

• Suddenly Mail asks for a password, but it does not accept

  I didn't mail in three days on my desktop computer.  It keeps asking for my password for aol, but will not accept it.  My password has not changed, but it does not accept it.  On all my other devices, the mail comes, and the password is accepted.

  Anyone?

  As is the case with many email providers, AOL may have made some changes at their end. The usual troubleshooting step is to delete this email account > then add it back back

  Let us know - best chance

• unlocked iPhone, but ask for the activation of the SIM

  I bought an iPhone 6 from the UK as a factory unlocked. I have never had any problem with any carrier other whatsoever. Recently, I restored (also tried in DFU mode) iOS phone and on the restoration, he asked for activation and said that my SIM card was "invalid". I tried with several SIM cards and yet no progress. At the same time, I checked the IMEI and it showed that it was locked to O2 UK, I spoke to O2 and they said that the phone is unlocked. Since then, I have restarted the phone and tried again, but made no progress. Is there something that I am missing? Can someone help me?

  I would appreciate your help as I was without a phone for 2 days.

  I get the following on my iPhone:

  

  And the following in iTunes:

  

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET