Similar Questions

• This card will suit my Precision 490 workstation?

  First of all, I want to thank Hunter for this thread and JMichael (and all) for reactions/answers interesting and very informative!

  I bought a refurbished Dell Precision 490 work coming arrived today. (yay!) The one I bought has the following specifications:

  • Dell Precision 490 workstation cases
  • Card mother Dell
  • Two processors dual-core Intel Xeon 2.0 GHz each for Total of 4 units of execution
  • 500 GB SATA hard drive
  • ATI FireGL V3350 video card with DVI output double
  • 750 watts power

  I bought (after consultation with Tiger Direct) from NewEgg.com (renovated) graphics card include:

   01 G-P3-1371-RX of EVGA GeForce GTX 460 (Fermi) 1 GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card

  In the specifications of the card it says that it is "double slot" However, the specs on the 490 show that it has a PCI-e 2.0 x 16 slot. The guys from Tiger Direct (after looking at the specs for the 490) said he would do. So my question is - is this the case? (no pun intended... well, maybe a little )

  In addition, given that the map is a refurb, it comes not with cables or CDs with drivers. I found the article on EVGA website and saw that he (originally) comes with two cables for the power - it looks like two cables of 6 pin Molex (3rd picture from the left row, at the top), it also says:

  Requirements
  At least a 450 Watt power supply.
  (Recommended minimum power supply + 12 volt current rating of 24 amperes).
  Two dongles available power of PCI-E 6 pin

  And people to revisit the issue on NewEgg.com said that they had to order power cables separated - then... I ordered two of these. Those who will work with the Precision 490 and this card?

  Additional information: the 490 I bought has the following:

  • 2 slot PCI-e x 8 wired as x 4
  • 1 PCI - e x 16 graphics slot
  • 2 slots for 64-bit / 100 MHz PCI - X with support for 3.3V or universal cards
  • 1 slot PCI 32-bit / 33 Mhz

  I really am crossing fingers and toes that they will work together, because even if I don't play (except SolSuite Solitaire lol) I have do many 3d work in 3dsMax, (CUDA is so extremely important!), Daz3d and also a lot of work in the Adobe CS5 programs, so I had to switch to the Precision 490 workstation (am also installation of 8 GB of RAM (4 x 2 GB each) for a total of 10) GB of RAM. Hoping it will be a monster and my models will look stunning in my pictures!

  Any help is greatly appreciated!

  Given that the card mother a 490, 3 PCI-E slots with the 16 X being in the Center, I would say that Yes it will fit in the slot.

  If it fits the length wise or past the heat sinks I have no idea.

  
  larger image and
  larger image and

  Comments

  
  larger image and
  
  larger image and
  

  

  Dell Precision 490 Workstation Motherboard GU083 Dual CPU Socket
  [GU083] GU083

  220,00 $89,99 $
  Save: 59%

  There are currently no product reviews.
  
  NOTE: Comments may require prior approval before they will be displayed
  

• Dell Precision 490 CPU Upgrade

  Hello

  My Dell Precision 490 currently runs 2 x Intel Xeon 5130 (Woodcrest) 771 socket LBA.  The Intel Xeon 5160 next would be compatible with my system. My mobo is ODT031 / 5000 X of Chipset / 6321ESB Southbridge.

  Server Intel Xeon 5160 3.0 GHz dual core Socket 771 CPU SL9RT 4 M/1333 64 - bit

  Type of CPU / microprocessor
  Server market segment
  Family Intel Xeon 5100
  Model number? 5160
  CPU HH80556KJ0804M reference numbers are a microprocessor tray/OEM
  BX805565160A is a microprocessor in a box
  BX805565160P is a microprocessor in a box
  Frequency? 3000 MHz
  The bus speed? 1333 MHz
  Clock multiplier? 9
  The package 771-land Flip - Chip Land Grid Array (FC-LGA6)
  1.48 "x 1.48" (3.75 x 3.75 cm)
  Socket Socket 771 (LGA771)
  Introduction date 26 June 2006
  Price at introduction $851

  S-spec numbers
  Production processors of'RE / QS
  Part number QLUF QOXI QTII QXQT SL9RT PLATE SLAG9
  BX805565160A +++
  BX805565160P +++
  HH80556KJ0804M +++

  Architecture / Microarchitecture
  Core microarchitecture
  Bensley Platform
  Cranberry Lake
  Glidewell
  Core processor? Woodcrest
  Review of basic? B0 (QLUF)
  B1 (QOXI)
  B2 (QTII, SL9RT, SLABS)
  G0 (QXQT, SLAG9)
  CPUIDs 6F6 (SL9RT, SLABS)
  6FB (QXQT, SLAG9)
  0.065 micron manufacturing process
  Data width 64-bit
  The number of cores 2
  The number of threads 2
  Floating Point Unit integrated
  Level 1 cache size? 2 x 32 KB instruction caches
  data cache 2 x 32 KB
  Level 2 cache size? 4 MB of shared cache
  Multiprocessing up to 2 processors
  With MMX technology
  SSE
  SSE2
  SSE3
  Extended Memory 64 technology (EM64T)?
  Virtualization technology?
  Execute disable bit?
  Power mode low features HALT
  Extended halt mode
  Stop grant mode?
  Enhanced SpeedStep technology?

  Thermal/electrical parameters
  Nucleus of V? 1V - 1, 5V (B2 Stepping)
  0.85V - 1, 5V (G0 stepping)
  Minimum/Maximum operating temperature? 5 ° C - 56.5 ° C (B2 Stepping)
  5 ° C - 60.7 ° C (B2 Stepping)
  5 ° C to 65 ° C (G0 Stepping)
  Maximum power dissipation? 130.83 watt
  104,84 watt (continued)
  Thermal design power? 65 watt

  Notes on Intel HH80556KJ0804M
  The bus frequency is 333 MHz. Because the processor uses Quad bus Data Rate effective bus speed is 1333 MHz
  Part BX805565160A includes 3U + active / passive thermal solution 1U
  Part BX805565160P includes the 2U passive thermal solution

  I tried an Intel x 5365 and it remains as a CPU not supported. I'm under revision of BIOS A08. There is sauce more involved magic, such as a general release BIOS rev no?

• Product key OEM Windows Vista Business on Precision 490

  Just bought a Dell Precision 490. It comes with 32-bit Windows 7 HP... The product key for Windows 7 is on the case. With this key, there is a Microsoft Windows Vista Business OEM key. My first question is how do I know if it is a key of 32 or 64-bit of Windows Vista? Or can be used for either (it does not specify the key). My second question is how properly to reinstall Windows Vista. I noticed there are a lot of different people who sell different restart/reinstall/repair disk. Thank you.

  Windows OEM product keys can be used to install either 32-bit or 64-bit.

  You can ask Dell support (if in the United States, and after a "transfer of property") or use a disc from another system that corresponds to the version of that license is for (Home, Ultimate, etc.):

  support.Dell.com/.../backupcd_form

  You can use Retail media, then activate by phone from Microsoft (not Dell) using your product key:

  en.Community.Dell.com/.../3317.2-3-Microsoft-Windows-Vista-Official-ISO-Download-Links-Digital-River.aspx

  Just boot on the Windows DVD, delete all partitions that are shown to you, then call install... you will have to install drivers after Windows is installed, but you can ask that once Windows is on.

  You must also determine if you have a RAID controller that requires special drivers during installation.  The 490 could use a PERC or SAS RAID 5 card.  You can check the box to see where the disks are wired to and/or check during POST to see if you have a CTRL-C or a prompt CTRL-R, while the loading devices.

• ESXi and Dell Precision 490

  First of all, let me say that, if this isn't the right place, I'm sorry.  I have a problem with installing ESXi on a precision.  I burned the ISO several times to several different discs.  I formatted the 490 three times now with a Ministry of defence approved the method via killdisk.  I pulled my hair to Googling for an answer, but it seems to elude me.

  I'm trying to install VMware-VMvisor-Installer - 4.1.0-260247.x86_64.iso on a workstation Precision 490 with dual intel woodcrest xeon 5110 processorsand Buffered ECC memory of 4 GB and an AttachedSCSI reader series 74 GB.  I burned the ISO to a variety of different drives, including CD and DVD from three different companies.

  Whenever I have ask the system to boot from the cd or dvd, drive it starts to Dr - Dos, spits out a ton of information so fast on the screen, I can not copy everything, disables the USB keyboard and the level of A:\  I have to remove the seizure of power or press and hold the power button in order to get the machine to answer.

  I tried to disconnect the hard drive and boot from the disc, but the same thing happens.  I tried removing the HD and no cd/dvd in the drive and it fair errors by saying there is no disk.

  When I installed vmserver, I came across some problems with download it VMwares site.  After sending an email to the subject they broke the download link, I got a call from a vmware support agent who helped get a working vmware server image.  He investigated what I was doing and explained I should use esxi because it would be much better, but I was unable to get the software to install even.

  Googling has not donnГ no results that would be useful.  Most seem to point to something always on the hard drive, but the hard drive has been erased to the standards of the Ministry of defence.

  Any help or thoughts would be grateful to you.  I would like to get this machine running.  My plans (do not know if it would be useful or not) are to install Freepbx on a virtual machine and another virtual machine to use as a sandbox environment to test Linux.  The machine would be dedicated PRIMARILY to the PBX and would have the largest piece of the resources.

  Thank you for your time and your consideration.

  Kind regards.

  Type in google esxi unofficial hcl. I think it's on vmetc do not look first. Otherwise I would try to find a controller from Dell which is supported in the official HCL or not

  Sent from my iPhone

• Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  OVERVIEW
  Introduced	June 2012
  Discontinued	October 2013
  Model identifier	MacBookPro9, 1
  Model number	A1286

  Edit: in fact this model number is used for some units, from a late model ' 08.

• Model of motherboard?

  
  

  For the chipset, you can download the software as CPU-Z, you will know.
  For the model of motherboard, I'm not sure what you really want, but you can find all the numbers in the expedition of Tabuk of your generation. this might help a little.

• U2715H, Precision 490, Quadro FX 3500, with resolution (2560 x 1440) max?

  Hello group,

  I was lucky enough to get a screen of U2715H at work, but I can't seem to get it properly set up. After many trips to Best Buy for purchases serveral adapter, I just want to know how to get the screen running in high resulution, that my graphic adaper allows: 2560 x 1440. Is there a specific adapter that would work? I'm out of ideas.

  System:

  Dell Precision 490 with a NVIDIA Quadro® FX 3500 (all drivers date etc.)

  U2715H screen

  Windows7

  Attempt:

  http://www.BestBuy.ca/en-CA/product/Rocketfish-Rocketfish-DisplayPort-to-DVI-cable-RF-dp40601-RF-dp40601/10254117.aspx

  http://www.BestBuy.ca/en-CA/product/insignia-insignia-1-8M-6-ft-HDMI-to-DVI-cable-NS-pi06502-c-NS-pi06502-c/10296335.aspx

  Thank you very much for your help!

  Marcus

  One is to do =
  DP video monitor DVI - DL cardD

  The other is to do =
  HDMI to DVI video card -D SL monitor

  Nine years, Dell OEM Nvidia Quadro FX 3500 has two DVI -I DL ports. I don't think there is such a thing as a DP/DVI-I cable or HDMI/DVI - I cable? You can buy a modern PCIe x 16 a DP or CDM out video card. Then connect to the U2715H using his DP in the cable of the CDM.

• Dell Precision 490 - specifications?

  Hello

  Y at - it a link to the detailed specifications of Dell for the 490 please? I want to remove the hard drive from my Optiplex 760 and insert it into the 490 as the auxiliary drive.

  Any suggestions please?

  Thank you

  http://downloads.Dell.com/published/pages/precision-490-DT.html

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dell_precision_workstation/precision-490-dt_user%27s%20guide_en-us.PDF

• Precision 490 does not start: LED 3 and 4 on the constant and green power button LIT stable!

  My Dell precision 490 starts not No bios screen, that it stops before it happens at this point and a LED number 3 and 4 are on constantly and the power that is lit button green. All the fans in the system comes on and stay on, but it's like that. No video appears on the screen. The monitor works but like I said it seems that he stops before the system reached the stage of the bios boot screen. Graphics card is ok tested in another machine from dell.
  I've deleted all the ram cards and hard drive even the system battery (and reinstalled it) and tried to start but the same result with the fans on and the same façade turns on with the power button on steady green. His market XP Professional SP3 32-bit with 4 GB of ram a dual core Xeon 5160 3 GHz processor and disk of 1 TB sata hard.
  Any suggestions would be great,
  Thank you
  George

  John,

  Thank you for your response. I found my problem and currently running fine. I bought a couple of xeon E5440 processors who don't are not supported by the Council. I had to find it takes 5100 or 5300 series. Once I installed the 5300 series, everything was fine.

  Thank you for your response.

  Vince

• Precision 490

  I'm having some trouble with a clarification on this issue

  Are the PCI-E slots on the precision 490 1.0, 2.0, or 2.1 to a combination of who?

  All what I can't find is that some people say that the slot 16 x is 2.0, but what about 8 x (which are wired in x 4) slots.  Questions about the ability of speed SSD.    I do not know the sata onboard are 3gbs.

  PCIe 1.0 Ram DDR2 intel 5000 X chipset

  Lane Width	Clock Speed	Flow (Duplex, bits)	Flow (Duplex, bytes)	Expected use
  Note: The table above contains PCI Express 1.0 bus speeds. For version 2.0, multiply all bandwidths by 2.
  x 1	2.5 GHz	5 Gbps	400 MB/s	Slots, Gigabit Ethernet
  x 2	2.5 GHz	10 Gbps	800 MB/s
  X 4	2.5 GHz	20 Gbit/s	1.6 Gbps	Slots, Ethernet 10 GB, SCSI, SAS
  x 8	2.5 GHz	40 Gbps	3.2 Gbps
  X 16	2.5 GHz	80 Gbps	6.4 Gbps	Graphics cards

  PCIe architecture	Gross bit rate	Bandwidth through feel	Total bandwidth for a x 16 link
  Note: The table above contains PCI Express 1.0 bus speeds. For version 2.0, multiply all bandwidths by 2.
  PCIe 1.0	2.5 Spwg	~ 250 MB/s	~ 8 Gbps
  PCIe 2.0	5.0 Spwg	~ 500 MB/s	~ 16 Gbps
  PCIe 3.0	8.0 Spwg	~ 1 Gbps	~ 32 Gbps

• Dell Precision 490 - Installer reboots after loading install.tgz

  Heya,

  I'm trying to install VMWare ESXi Update 1 4.0 on a Dell Precision 490 workstation. (Yes, not on HCL, I think).

  In any case, I boot on the CD, and it proceeds along until the "Loading image.tgz" Stadium, after which it restarts without delay.

  I took a video of the process, and in the last screen, just before the restart, he says:

  Module: install.tgz

  Loading install.tgz...

  Start-up: MBI = 0 00010150 x, entrance = 0 x 0...

  I tried to add that the 'noACPI' switch to the boot options, same result.

  There seems to be something similar to what occurred here:

  http://communities.VMware.com/thread/263240;JSESSIONID=9C89E876F761BC5E6D528BBB5ABC810F?TSTART=30

  But there is an answer. (I posted here to see if the author has managed to operate).

  See you soon,.

  Victor

  What you use for storage in the PWS490? What the rest of the specification of it (processors, amount of RAM, etc.)? Have you tried to install ESXi on a USB key (a device 2 GB +, SanDisk Cruzer work)?

  Once I have my iSCSI SAN built, I'll be able to see how to boot from the USB goes on my Tower of PWS490... Should be some time later in the day...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Compaq Presario CQ61-430SV: model of motherboard

  I have a Compaq Presario CQ61-430SV I would like to know the reference number of the motherboard has this laptop. Can someone help me?

  Map of discrete PM45 system for use with separate computer models, select (including integrated modem Digital Media Slot and replacement thermal material) 517838-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Damaged Qosmio X 500 - need info on the model of motherboard

  + Hey everyone. +

  Unfortunately, my X 500 has been damaged (probably graphics card). Anyway... in Poland no one can fix it.
  So I have a few questions:

  1. What is the exact model of the motherboard for this Toshiba (I do not want to disassemble the entire laptop):

  * QOSMIO * X 500-118 *.
  * PQX33E *-* 01M012PL *.

  2. is it possible to come up with something this motherboard (with the graphics card)?

  THX.

  >.. .in Poland, no one can fix it.
  It can be fixed, but I put t know what you expect under the attachment. Problem is when the graphic card is faulty entire motherboard will be exchanged and it can be done by the service provider in Poland.
  If you wish to contact ASP, addresses and phone numbers, you can find on http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/

  It is not easy to get the info or part number exact for motherboards. Always is it that Toshiba offers two models Qosmio X 500 and looking PQX33E mainboard.
  Have you tried to find a company in Poland where you can buy refurbished mainboard?

  By curiosity, but what is the problem with your Qosmio?

• Foxconn/Hp: Model of motherboard Indentyfying

  Hello everyone.

  I have a little problem, I want to sell a new motherboard, but I don't know what is the model number or manufacturer, while I know what are the full specifications of it.  I searched the Internet, but nothing is specifically bulging.

  AFAIK do watch, it is probably some models of HP desktop, I guess EliteDesk 800 G2, but I'm not sure. There is a label bar code, with some numbers on it, if there is a way to check for this, would be great.

  Here are some pictures.

  

  Hello:

  The results of my research, AS # is 646549-003 HP part # 795972-001, and the motherboard for a HP Prodesk 600 G1 Tower.

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5387438&docid=emr_na-c03812602&docLocale=en_US