Similar Questions

• This card will fit in my XPS 8700?

  I recently bought an XPS 8700 and thought to upgrade his graphics card. I'm looking at one is the EVGA 4 GB Geforce GTX 770 here:

  http://www.amazon.com/EVGA-Superclocked-Dual-Link-Graphics-04G-P4-3774-KR/dp/B00E5AEIKE/ref=sr_1_1?s=electronics&ie=UTF8&qid=1382478542&sr=1-1&keywords=EVGA+GeForce+GTX+770+Superclocked+with+ACX+Cooler+4+GB+GDDR5+256-Bit+Dual-Link+DVI-I%2FDVI-D+HDMI+DP+SLI+Ready+Graphics+Card+04G-P4-3774-KR

  The card is listed with the dimensions of 12.9 x 9.5 x 2.9 inches. After looking at the inside of the case I am afraid that this card does not. Can someone help me with the question of whether this card will fit in a case of XPS 8700?

  Either by the way, I am aware of the problems of compatibility with the 8700 UEFI and have already bought a beefier power supply for a new card.

  Thanks for the help!

  Hello NinthLayer,

  Dell XPS 8700 has never been tested with the EVGA 4 GB GeForce GXT 770. However, few users have installed nVIdia GeForce GTX 770 2 GB successfully on their XPS 8700. The nVIdia GeForce GTX 770 2 GB size is 10.3 "x 4.3" x double Slot. So before you buy the card, I suggest you take the computer to a local store and check if the graphics card works on the system.

  Please note: the EVGA 4 GB GeForce GXT 770 requires minimum of POWER supply 600W with PCI-E power 2 connector x 8 pins.

  I hope this helps!

• This card will work?

  I was thinking about an update on my HP G5120uk desktop PC. And I was wondering if this card would work on my computer?

  The map I was looking at was a

  ASUS GeForce GTX 560 810 MHz 1 GB DirectCU PCI-Express HDMI

  Hello

  I am pleased that you measured for this card. I hope that the radiator of the map is low enough for the card to fit.

  Try the Corsair CX500.

• I use a Belkin USB wireless adapter. In Device Manager, I see this same adapter listed several times... with a yellow exclamation mark over it. However, an entry for this card will not have any problems indicated and work well.

  I think that whenever this USB adapter is removed and reinstalled, the system is seen as a new USB device.  However, if I try to uninstall the list in Device Manager showing a yellow exclamation point, the system will not... I get a message saying "Uninstall failed...". This device may be required for the system startup.
  Suggestion?

  Hello Fgibson1911,

  Thank you for your message.  All of these entries stay after you restart your computer?  In addition, what happens when you search for new hardware?  Try this and let us know the result.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on Device Manager.
  Right click on "Network adapters", and select "search the hardware changes.
  The "Yellow!" entries disappear?
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• These two graphics card will suit my HP Pavilion G5410UK?

  Hi, I'm running on windows 7 64 bit and I was wondering if this graphics card would fit into the case of a G5410UK, in any case this is the graphics card:
  http://www.Amazon.co.UK/Sapphire-11179-09-20G-6870-GDDR5-graphics/DP/tech-data/B004R7MTPQ/ref=de_a_s...

  Yes - it is a PCIe card. It must adapt perfectly to your average waist.
  http://support.HP.com/us-en/document/c01903990
  http://support.HP.com/us-en/document/c02866007
  The integrated graphics card should automaticalybe disab leads when you install the new card.

• This card works in my PC? GeForce® ZOTAC GTX 480 in a HP Pavilion

  Hello everyone

  I have a small question I need help with my son computers, details are below.

  Computer:
  Computer Type PC ACPI x 64
  Operating system Microsoft Windows Vista Home Premium
  Operating system Service Pack [TRIAL VERSION]
  Internet Explorer 9.0.8112.16421 (IE 9.0)
  DirectX DirectX 11.0
  CHARLIE-PC computer name
  User name Charlie
  Connection domain [TRIAL VERSION]
  Date / time 2012-10-11 / 23:18
  
  Motherboard:
  CPU type QuadCore AMD Phenom X 4 9550, 2200 MHz (11 x 200)
  Name of the motherboard Asus M2N68-(Narra3) (1 PCI, 2 PCI - E x 1, 1 PCI-E x 16, 4 DDR2 DIMM, Audio, Video, LAN, IEEE-1394)
  Motherboard chipset nVIDIA nForce 430 6150SE, AMD K10
  Memory system [TRIAL VERSION]
  DIMM1: Qimonda 64T128020EU2.5B2 1 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
  DIMM2: Qimonda 64T128020EU2.5B2 [TRIAL VERSION]
  DIMM3: Qimonda 64T128020EU2.5B2 [TRIAL VERSION]
  DIMM4: Qimonda 64T128020EU2.5B2 [TRIAL VERSION]
  Type of Award BIOS (02/05/08)

  He wants a good graphics card for around £100 and I have my eye on this map

  GeForce® ZOTAC GTX 480 1.5 GB

  It says it is compatible with PCI or PCI 2.0 v1.1

  but as I have I can not know what PCI version he has on his Board or any model number, all I know is that there the motherboard is Asus M2N68-(Narra3) and it's HP Pavilion

  Hello:

  As far as the PCIe slot is concerned, the card should be fine.  The biggest problem I see is that if you put a much larger power supply that comes with additional PCIe power connectors that need to plug into the video card, there is no way this card will work on your PC.

  That's what worries me.

  Package contents

  ZT-40101-10 P Driver disk ZOTAC Technology demos disc User manual Mini-HDMI-HDMI adapter Adapter DVI / VGA Double 6-pin to 8-pin power cable PCIe Dual MOLEX to PCIe 6-pin power cable

  Paul

• Dell Precision 490 - Installer reboots after loading install.tgz

  Heya,

  I'm trying to install VMWare ESXi Update 1 4.0 on a Dell Precision 490 workstation. (Yes, not on HCL, I think).

  In any case, I boot on the CD, and it proceeds along until the "Loading image.tgz" Stadium, after which it restarts without delay.

  I took a video of the process, and in the last screen, just before the restart, he says:

  Module: install.tgz

  Loading install.tgz...

  Start-up: MBI = 0 00010150 x, entrance = 0 x 0...

  I tried to add that the 'noACPI' switch to the boot options, same result.

  There seems to be something similar to what occurred here:

  http://communities.VMware.com/thread/263240;JSESSIONID=9C89E876F761BC5E6D528BBB5ABC810F?TSTART=30

  But there is an answer. (I posted here to see if the author has managed to operate).

  See you soon,.

  Victor

  What you use for storage in the PWS490? What the rest of the specification of it (processors, amount of RAM, etc.)? Have you tried to install ESXi on a USB key (a device 2 GB +, SanDisk Cruzer work)?

  Once I have my iSCSI SAN built, I'll be able to see how to boot from the USB goes on my Tower of PWS490... Should be some time later in the day...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Cards will be open any after update 9.3. Anyone else having this problem?

  Cards will be open any after update 9.3. Anyone else having this problem?

  No, not at all. Cards work properly.

  Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

  Also, make sure card is configured to use mobile data (settings app > cell phones > cards [turn it on if it isn't already].) And that location services is enabled for it (settings app > privacy > location Services)

• This video card will fit with my card mother MS-7613 (Iona-GL8E)?

  Hello.

  I am looking to update my video card in my Pavilion elite HPE-431f desktop PC with this card:

  http://www.Newegg.com/product/product.aspx?item=N82E16814130910

  The dimensions are 9.5 "H slot card 4.37" 2. I'm worried about the bottom of the card to hit the heat sink:

  

  I think it will clear the RAM and the power connector 24 pin but looks like it might hit the heat sink, because it takes 2 slots.

  And before ask you, I improve my diet too for the card. I haven't ordered yet to the card and I did not really

  want the hassle of a return.

  Anyone can shed some light?

  Thank you.

  On condition that the heatsink you speak is not larger or only slightly as the PCIe x 16 slot, you should be fine.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I bought the program to transfer pdf in word, but I n rooms buy this. And now my card will be charged. Can I cancel it?

  I bought the program to transfer pdf in word, but I n rooms buy this. And now my card will be charged. Can I cancel it?

  Hi deborab95796310,

  Please contact the customer service

  Thank you

  Abhishek

• APPLE GIFT CARD WILL NOT ANALYZE IN - SAID NEEDS AVTIVATING EVEN WHEN I HAVE THIS FIST IN

  Apple gift card - will be activated-

  I manually hit it - and scan it with camera always will NEED to INITALISE - HELP

  Hello

  Try the instructions here > If you do not redeem your gift card iTunes Store or code - Apple Support

• This X 240 WAN card will work in England?

  Hi, I have in Sweden we use this laptop 20AL00C7MS Lenovo ThinkPad X 240 20AL - 12.5 "- Core i7 4600U in our trucks."
  We run on the windows computer and business software.
  Computers use the 4G connection to cumminicate with our servers.
  Now US city use the same type of equipment at our office in England.
  But I don't know if this model will work in the English mobile network.
  Anyone who knows where I can get the information?
  Thank you and Merry Christmas.

  Moderator edit: added detail to the subject

  As long as the 4G modem is EM7345 http://support.lenovo.com/us/en/documents/pd031021 it will work almost everywhere in the world except US.

  According to this http://en.wikipedia.org/wiki/List_of_LTE_networks#Europe the only problem is the network to broadband UK on strips of LTE TDD 42 and 43. Other FDD UK networks will work.

• Product key OEM Windows Vista Business on Precision 490

  Just bought a Dell Precision 490. It comes with 32-bit Windows 7 HP... The product key for Windows 7 is on the case. With this key, there is a Microsoft Windows Vista Business OEM key. My first question is how do I know if it is a key of 32 or 64-bit of Windows Vista? Or can be used for either (it does not specify the key). My second question is how properly to reinstall Windows Vista. I noticed there are a lot of different people who sell different restart/reinstall/repair disk. Thank you.

  Windows OEM product keys can be used to install either 32-bit or 64-bit.

  You can ask Dell support (if in the United States, and after a "transfer of property") or use a disc from another system that corresponds to the version of that license is for (Home, Ultimate, etc.):

  support.Dell.com/.../backupcd_form

  You can use Retail media, then activate by phone from Microsoft (not Dell) using your product key:

  en.Community.Dell.com/.../3317.2-3-Microsoft-Windows-Vista-Official-ISO-Download-Links-Digital-River.aspx

  Just boot on the Windows DVD, delete all partitions that are shown to you, then call install... you will have to install drivers after Windows is installed, but you can ask that once Windows is on.

  You must also determine if you have a RAID controller that requires special drivers during installation.  The 490 could use a PERC or SAS RAID 5 card.  You can check the box to see where the disks are wired to and/or check during POST to see if you have a CTRL-C or a prompt CTRL-R, while the loading devices.

• Precision 490 does not start: LED 3 and 4 on the constant and green power button LIT stable!

  My Dell precision 490 starts not No bios screen, that it stops before it happens at this point and a LED number 3 and 4 are on constantly and the power that is lit button green. All the fans in the system comes on and stay on, but it's like that. No video appears on the screen. The monitor works but like I said it seems that he stops before the system reached the stage of the bios boot screen. Graphics card is ok tested in another machine from dell.
  I've deleted all the ram cards and hard drive even the system battery (and reinstalled it) and tried to start but the same result with the fans on and the same façade turns on with the power button on steady green. His market XP Professional SP3 32-bit with 4 GB of ram a dual core Xeon 5160 3 GHz processor and disk of 1 TB sata hard.
  Any suggestions would be great,
  Thank you
  George

  John,

  Thank you for your response. I found my problem and currently running fine. I bought a couple of xeon E5440 processors who don't are not supported by the Council. I had to find it takes 5100 or 5300 series. Once I installed the 5300 series, everything was fine.

  Thank you for your response.

  Vince

• Precision 490

  I'm having some trouble with a clarification on this issue

  Are the PCI-E slots on the precision 490 1.0, 2.0, or 2.1 to a combination of who?

  All what I can't find is that some people say that the slot 16 x is 2.0, but what about 8 x (which are wired in x 4) slots.  Questions about the ability of speed SSD.    I do not know the sata onboard are 3gbs.

  PCIe 1.0 Ram DDR2 intel 5000 X chipset

  Lane Width	Clock Speed	Flow (Duplex, bits)	Flow (Duplex, bytes)	Expected use
  Note: The table above contains PCI Express 1.0 bus speeds. For version 2.0, multiply all bandwidths by 2.
  x 1	2.5 GHz	5 Gbps	400 MB/s	Slots, Gigabit Ethernet
  x 2	2.5 GHz	10 Gbps	800 MB/s
  X 4	2.5 GHz	20 Gbit/s	1.6 Gbps	Slots, Ethernet 10 GB, SCSI, SAS
  x 8	2.5 GHz	40 Gbps	3.2 Gbps
  X 16	2.5 GHz	80 Gbps	6.4 Gbps	Graphics cards

  PCIe architecture	Gross bit rate	Bandwidth through feel	Total bandwidth for a x 16 link
  Note: The table above contains PCI Express 1.0 bus speeds. For version 2.0, multiply all bandwidths by 2.
  PCIe 1.0	2.5 Spwg	~ 250 MB/s	~ 8 Gbps
  PCIe 2.0	5.0 Spwg	~ 500 MB/s	~ 16 Gbps
  PCIe 3.0	8.0 Spwg	~ 1 Gbps	~ 32 Gbps