ASM high redundancy on the quarter grid should be possible

Similar Questions

• ASM external redundancy and the number of disks

  Hello
  
  
  We are about to install a solution RAC on IBM AIX 5.3 LPAR and VIO.
  According to Oracle certification, we are forced to use DSO (11 g) for storage.
  Because we have a huge SAN solution for all our systems, also the installation of the DSO will run on the SAN
  The complete SAN is in a RAID5 or RAID10 configuration. This automatically means that we will use external redundancy
  The database that will be placed on the system is currently around 50 GB in size.
  
  Now that you guys and women think how to set start, if
  
  one)
  We set up initially only 1 disc in the diskgroup to 60 GB for example,
  ASM does support the ability to increase a logical disk, because we are currently used, using the VIO Server?
  If it is not supported there so if the diskgroup needs to be extended, add another disk the same size, or we can add disks with smaller sizes
  
  (b)
  We set up initially more discs of small size in the diskgroup, making a total of 60 GB
  ASM will probably begin the distribution of the data on the three disks.
  Overhead that does?
  That this has a negative impact, because the three logical drives are already in a striped solution (RAID10)?
  
  
  (If the extension of the logical drive using the VIO in Setup a) only supported, automatically end up in b).
  But I would like to know head/experiences and advice.
  
  Thanks in advance
  
  FJF

  You can increase the size of the logical unit number, which is a Member
  ASM diskgroup, after that, to increase
  the disk partition of this LUN to cover the new size of this LUN,
  and the last step is to tell ASM this member disk has been resized
  "alter diskgroup resizing disk.

• Redundancy of the Normal ASM - three stores, three groups of failure

  Hello

  I have a question about groups of failure in ASM. I have an ASM diskgroup with normal redundancy and records of three different preparations. Each storage disks are in separate groups of failure (see screen below). I know what ASM allocates to a point as it allocates a copy of copy and the primary mirror and mirror copy is placed on a different disk that is part of a group of different failure. And it is understood for the configuration with two storage (or controllers) and two different groups of failure. But what with configuration where are three storages and failure groups? My question is: If I failed three groups if new extensions are allocated are mirrored are placed on the other two discs are it is a part of a group of different failure? Or maybe this kind of configuration (with three groups of normal redundancy ASM failure) is not supported?

  

  I know what ASM allocates to a point as it allocates a copy of copy and the primary mirror and mirror copy is placed on a different disk that is part of a group of different failure. And it is understood for the configuration with two storage (or controllers) and two different groups of failure. But what with configuration where are three storages and failure groups? My question is: if I have three groups of failure, if new extensions are allocated are mirrored are placed on the other two discs are it is a part of a group of different failure? Or maybe this kind of configuration (with three groups of normal redundancy ASM failure) is not supported?

  No matter how much you failgroup. Normal redundancy requires at least 2 Failgroup.

  Oracle will allocate primary measure in a failgroup and place the mirror of the scopes in an another failgroup.

  The order does not matter since you always have a copy in a different failgroup.

  See example below (d = data extended)

  FG1 |   FG2 | FG3

  ========|===============|=========
  

  d1      |   d1_copy:

  |   d2          | d2_copy

  d3_copy |               | d3

  When you create a Diskgroup without specifying the failgroup, Oracle will automatically create a failgroup to each diskgroup. So, if you create a normal with normal redundancy Diskgroup and ASMDISK 10, ASM will create 10 failgroups.

  You have 3 warehouses and 3 Failgroup

  If you loss storage (h/f) ASM will tolerate because you measure mirror in any other failgroup (h, l, square).

  If you loss both storage (h/f) or two different storage disk/controller at the same time ASM will not tolerate. (Need to restore a backup database)

  Your point of failure: you must make sure that the two storages/controllers/disks will still be available.

  If your concern is: can I have a situation where two storage can do fail (or cut) at the same time. Then, you need high redundancy, because this configuration will tolerate you two storages loss (h/f) at the same time and Diskgroup will remain active.

• Redundancy of the ASM

  Hello
  
  I have a 1 TB raid 10 storage san for RAC DB installation and wanted to ask you what redundancy is preferred for my installation. External/Normal/high?
  And as I know if I want external I don't need to partition my 1 TB storage, if I put it as Normal I have to partition to 2 partitions and if I put at the top, I have to partition the storage of 3 parts, am I right?
  
  Thank you

  I'd go for the normal redundancy, it's a good compromise. Make sure you have 2 independent physical devices. Partitioning is not clear to me, what do you mean? It is not supposed to partition a physical device and set the redundancy of the DSO on that, if you lose this device the mirror (s) have also disappeared.
  External redundancy can be used if you are mirroring a typical RAID implementation. I wouldn't mix redundancy RAID and ASM, choose one of them.

  Werner

• Redundancy of the workspace

  How can I make my Horizon Workspace deployment highly available in the event of failure?  There are 5 VMs to vApp, but none of them are there to provide redundancy for the others.  I'm afraid that the workspace is a single point failure for my environment to view giant.  I saw a "addvm" command... should I just run which, for all 5 mV in the vApp and then I'll have 10VMs with each VM with compensation for redundancy?  Or it does not work like that?

  T

  Today, with the data - will, Yes, we have redundancy. Basically, a set of users are assigned to each data - going. If this goes data fails, these users will not be able to access the data horizon features. We actively try to fix this in our future versions.

  You mentioned that you use view integration, which should not have any how reliance on data - will go down. Please let us know if you are using data to horizon as well. If so, we should call for webex and we can guide you through a few ways of redundancy using HA etc.

• Satellite A200-1TP - the high temperature of the processor

  Hello, I have never had a problem with my laptop up to now... I was playing a game when I couldn't play more because my keyboard was raging on the left side.
  I checked the temperature of the cpu and it was 80 c! I don't know too much about temperatures, but I think it is too high.
  I closed the game and he lowered to ~ 60, then I tried a program called orthos to check the performance of the PC while making 400 iterations of lucas-lehmer and it reached 95 C! OK, it's time to do something.
  I tried to format my laptop and see what happpens... On 'high performance', it of about 64 c and on 'power saver' must be between 50 - 55 c, a better way but I think it should be lower. I tried to clean the fan with a vacuum and I think it helped a little... I dare not open my phone because I don't know that I'll break it.
  The fan is not broken, it is running, I tried using 'speedfan' change rpm, but this program does not detect my fan so I can't do anything...
  I don't know why this is happening. I was so happy until now... I would like to repair the laptop, not to buy a laptop cooler, then... what I need to do?

  Thank you

  -Furthermore, the disc is 41 c and GPU temperature is 27 c, I think these are ok.

  Hello

  > I tried to format my laptop and see what happens... On 'high performance', it of about 64 c and on 'power saver' must be between 50 - 55 c, a better way but I think it should be lower.

  No contact, the temperature will not stay if you run applications of high performance as the games for example.
  Running high-performance programs all internal devices must run with max performance which leads to a higher heat dissipation and this leads to a higher temperature

  Of course clean dust cooling modules and debris should help cool the laptop better but it won't change the fact that you will always see a higher temperature, running games

  PS: CPU keeps the temperature of 100 degrees, that's what I found on the Intel page!

• ICS error - "the service of the redundancy or the grope does not start.

  These days I was facing this problem on ICS. Whenever I try to share my internet connection with wifi, it gives an error saying: "the service of the redundancy or the grope does not start" I have reset the connection, disable on surroundings & & restart the system as well, but not the changes even error every time. Is there someone can help on this desire to please much appreciated.

  Hi kaliszewski,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks that you are facing with Internet connection sharing problems.

  Please follow the steps mentioned below that can help us to solve the cause of the problem.

  Method 1:

  Maybe not all services that run the Internet (ICS) ICS are enabled. I suggest to start over and make sure that the underside of addiction services are activated.

  1. click on Start, run, type services.msc and click OK.

  2. to activate a service, find in the right pane and double click on its entry.

  3. make sure that the Startup Type is set to Automatic , and then click OK.

   

  All the following services must be so configured to use ICS:

  Application Layer Gateway Service
  Network connections
  Knowledge of the network (NLA) locations
  Plug-And-Play
  Remote Access Auto Connection Manager
  Remote Access Connection Manager
  Remote procedure call (RPC)
  Telephony

  After checking and automatic startup for each of these services configuration, close the Services window and restart the computer before trying again to enable ICS.

  Method 2:

  To disable and then re-enable the Internet connection sharing on the Internet connection of the Windows 7 computer. If it asks you to select a private network connection, select the one that connects to the hub. Check the connections to the LAN on each computer:

  1. Press Windows Key + R.
  2. Type ncpa.cpl in the box and press enter.
  3. Right click on the connection to the local network, and then click status.
  4. Click on Details. It should show these values:
  • IPv4 address: 192.168. *. *
  • IPv4 subnet mask: 255.255. *. *

  If the values are not good, Internet connection sharing is not configured correctly.

  You can also consult the following link for troubleshooting Internet connection sharing problems:

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Hope the above caliper problems

  If you need further clarification or additional assistance, please let us know, we will contact you as soon as possible.

  Thank you.

• My "BOLD" of blackBerry Smartphones is turned off as soon as the loading page less reaches the quarter

  Hello, I woke up this morning and my phone was working fine. I am back asleep and woke up it was off and everytime I try to turn it on I see the red light and then it starts to load until it reaches the quarter or even less, and it shuts off and restarts with the red light and the loading page... etc. What should I do? I mean my phones not died and I bought a new battery for it, so the problem is not the battery

  If your BlackBerry is still under tension turned off with a black screen, or constantly restarts, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• ' Start the new grid: Yes "does not start new grid.

  Hello

  I use apex 4.2.6.

  I encountered a problem. I want to create my own grid of the apex. So I created templates in the PAGE template for container, column and line.

  
  I expect apex to create the new html markup for grid (as defined in the model) whenever I set something like "START NEW GRID: YES.

  And I expect him to create a new tag html line whenever I set something like "START NEW ROW: YES '.

  
  But this isn't the case. For example, my region parent in this example is set to start new grid. But he isn't getting wrapped.

  <div class="ui grid">
  ....REGION SHOULD GO HERE...
  </div>
  

  
  Is there something obvious that I'm missing?

  
  

  Apex. Oracle.com

  Application 47718

  
  

  TINO

  
  

  [email protected]

  
  

  password: test123
  

  
  

  Para wrote:

  https://Apex.Oracle.com/pls/Apex/f?p=87910:1

  OK, I'm always busy with this one.

  What I want to accomplish is this kind of layout.

  

  This is a documentation on the ui semantics that I use.

  http://Semantic-UI.com/collections/grid.html

  I got tangled up with grid new departure, the new starting line, new column... And so on.

  I only got tangled up with regions tho. I don't know why, but when I used the apex grid place my input elements that they behaved exactly as I wanted them to have.

  The problem with the problem of layout is that the div for the first line is not closed when it should be. I didn't spot that is still, but doing so is not being facilitated by a large number of other HTML validation errors.

  One was that the title of model of region report had an opening H1 tag and a closing tag H2. I fixed this one, but there are also a number of problems with the tables in the report (including the use of the substitution #REPORT_ATTRIBUTES string #: attributes are not synonymous of classes).

  I suggest that resolve you all these fundamental (and so easy to fix) error HTML first before focusing on the layout problem more complex. Paste the source code of the page in the W3C HTML Validator and try to fix the errors reported. Focus on those in the body of the page, which arise from the model code.

• Higher price in the future?

  I intend to order the subscription to 11.98 euros. The price remains stable or should be calculated with a higher price in the future?

  How and what type of subscription subscription?

  The specialized photography plan has a low, fixed subscription price

  A subscription to education has a low price the first year, and then the cost rises

  If you received a special offer, you must read the terms contained in the offer

• Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  It was the strangest thing, but I think I solved the problem. Use the CC version 2015.1 on a Wacom tablet using Win 8.1 and inadvertently from the same batch of photos, I had downloaded twice and it was very confusing because it did not prevent the duplication of files, but the files where not really there. I didn't know whether to remove or delete the files with question marks for fear of destroying a link or something so merged files and now everything works as it should, once chosen in the library that the photo appears in develop mode.

• Consolidate the Snap Shot or remove the snapshot, which should not

  Dear Experts,

  We have a Linux virtual machine, and we recently increased its vmdk to add more than 10 GB but before doing so, we took a snapshot of State off the machine. Increase now the space is done and now if I see the drive for this machine, it shows me 'thick' 35GB

  It is the only snap shot we have for this machine. If I click with the right button on computer and go the snapshot > I see here snapshot manager, take a snapshot, back to the snapshot current and last is to consolidate.

  If I go to the Snapshot Manager, I see the point where I am now and the last point that is marked as 'before you increase the space', so I need to click on consolidate OR click the old cliché and delete to maintain the current state of the machine? How the two are different consolidate and remove all?

  If the disk is thick, I can still get rid of snapshots? Please see attached images

  Thank you and waiting for response.

  So what I understand now is the consolidation option should be used when on condition is true:

  operation "snapshot disks compress after delete or clear all ', other wise I should go for delete snapshot in normal condition, please correct me if I got hurt?

  Peacebuilding operation removes all your recovery logs 'redundant '. But removing any operation remove your shots and consolidate on a single disc.

  Consolidation will cause no change in the number of snapshots. But delete / delete all will remove them actually snapshots and the present changes in this snapshot will be written back to the parent disk. And also always remove snapshot operation was launched with a peacebuilding operation.

  Let me know if you need additional information here.

  Delta records are created whenever a snapshot is taken?

  Yes.

  I have a vcenter Server virtual and it have a snapshot that we created when we start building the vcenter, can I remove it so that I am connected to vcenter server using Vsphere client.

  Yes you can delete it. But since its vCenter, please ensure that you have enough space available in your data store to perform a snapshot of deletion operation. The required space are perfectly explained by Duncan Epping in his blog...
  Snapshots, the revision - yellow bricks

  You could see some more pictures to the 'section of the messages at the bottom of the linked page.

  Please post your request here, if you want more help.

  ~ dGeorgey

• Do not stretch the fluid grid header image

  The grid of fluid image (hero div) meets the mobile and Tablet level queries, but not at the office 1232 px.

  Image develops only for a max of 1125 px of 1540 px for the nav main div, which is 73%.

  the CSS code is as follows for the desktop mode:

  / * Office Layout: 769px to a maximum of 1232px.  Inherits the styles of: Mobile and tablet. */

  @media only screen and (min-width: 769px) {}

  {.gridContainer}
  Width: 88.7142%;
  Max-width: 1232px;
  padding-left: 0,6428%;
  padding-right: 0,6428%;
  margin: auto;
  Clear: none;
  float: none;
  left margin: auto;
  }
  #top {}
  }
  {#mainNav}
  }
  {#menuSystem}
  }
  .menuItem {}
  Width: 13.0434%;
  Clear: none;
  margin left: 1.4492%;
  }

  Any suggestions how I can develop and stretch the image to the same width as the main nav (7 horizontal buttons) in the fluid grid container?

  If the value of 88.7142% should be increased to 100%, why then the image only develops to 73% and not of 88.7142%

  URL is < tyndall.net.au >

  Any suggestions greatly appreciated.

  Thank you

  Jonathan

  By default, FGLayout sets the images with a maximum width of 100%. The image can resize up to its native file size but not more.

  To do this, your image must be at least as wide as the layout of office max AND you should not add height or width attributes to the image itself.

  

  Nancy O.

• I have illustrator cs5, and I have plans, side, rear, fronts of vehicles. I did a trace of the line of these elevations and projected using the perspective for the perspective grid tool, but I get a distorted view on it, I'm trying

  I have illustrator cs5. I have front, side, rear, plans of vehicles. I need to create 3D illustrations. I did a trace of the line of these elevations and them projected on the perspective grid using the perspective tool.  I got a distorted view of each side of the rack.  What should I do?

  Please see the establishment.

• Best practices for the redundancy of the network in vSphere 4

  I'm running a cluster of production with 3 3850 m2 running at this time around 70 machines virtual, with more to come in the future.

  I have 6 CARDS each to use for networking.

  I'm not sure which is the best award of the NICs process.

  The redundancy for the VMKernel can I?

  Team for the Service Console NIC?

  I currently have the following:

  vswif0 Console of Service vmnic0

  vswif1 network of the VM vmnic3, 4, 5

  vswif2 VMotion vmnic1, 2 (different subnet)

  I have need of 3 NICs for the virtual machine or should I team the Service Console?

  It would be better to put a second Service Console on the Virtual Network machine's power switch, or do I have to put it on the switch of VMotion?

  My prefereence is for VMotion switch, but I'm ready to hear the recommendations of those wiser than me!

  I have 8 currently

  2 > SC (1 active, 1 standby on separate physical switches)

  3 > VMotion, FT, customer iSCSI PG (Etherchannel) MTU = 9000

  3 > VM PG VLAN (Etherchannel)

  previous to this, I had 4 I did:

  2 > SC, (2 active) VMotion, VST (vSwitch VLan Tagging)

  2 > VM (2 active) VLAN, VST (vSwitch VLan Tagging)

  Saw some problems with STP so separated back SC.

  6 as you do it sounds like a very good Setup.

  (2) SC, VMotion (active on each, Eve for each)

  (4) networking VM

  Don't forget that just them having active only effects not inbound traffic coming out unless you have all these ports in an Etherchannel configuration.  There is an example in the kB for this.  But depends on the amount of traffic all VM networks have if they network traffic a lot you could get by with less ports there.

  The SC definatally you want some kind of uplink port intelligence network as with ESX SC with HA ports check insulation network through these ports, so if this one is down which could lead to problems of isolation.  It's not like you'll do any FT? so it's something else to think about with the installation program.