My "BOLD" of blackBerry Smartphones is turned off as soon as the loading page less reaches the quarter

Similar Questions

• BlackBerry Smartphones backlight turns off after that I have a dial

  Whenever I have dial a number, the backlight turns off until the time wherever I disconnect. So if anyone wants any information about me that is stored on my phone, I can't just read from the phone. I got to wait for the call ends, find the info and then call them back!

  What is the use of call waiting if I can't see who's calling while I am already on another call.

  It's frustrating, I tried Googling, but have not been able to solve this problem. My bb torch is only 7 days old!

  Help, please!

  p.s. extending the duration of backlight in 'options' doesn't help either.

  Your flashlight is not only a smartphone, it's a "smart phone".  When you dial a number and place the phone in your face, the photocell detects this and turns off the display to save battery power.  If at any time you need to remove the phone from your face during a call (to add some numbers or receive another call, etc.), your phone reactivates the backlight, so you can see what is on the screen.

  If this isn't the case for you, remove the battery while your phone is on, then replace it (to do outside of a call, not on a call).  Try once more after that to dial a number.

  Let us know if that helps you.

• BlackBerry Torch 9800 Blackberry Smartphones constantly turn off, won't stay

  I would like to apologize in advance if this question has been asked before, I tried looking for a solution to this problem, but I can't seem to find the right answer.

  Today, after a full day of use my phone normally & no problem my phone turn off automatically. I didn't think much, I just turned it back on. After doing this, I noticed that he couldn't quite charge throughout the Blackerry splash screen. I initially attributed a low battery, because he was dying. Now that I'm home and I plugged my phone in charge that the real problem begins to manifest.

  He's trying to turn it on every time, it is trying to load via the Blackberry home screen, sometimes it gets fully load, sometimes it doesn't. If it isn't, it shuts off and restarts this whole process again. If it does get through the splash screen, I can access my home screen, but after a few seconds it stops again.

  I did a battery pull, even removed my card a few minutes - no change. I thought that I could reload the software and restore everything, but it will not even stay on long enough for me to check all parameters in this topic.

  Does anyone have advice for me? I hope that my phone is not quite dead.

  Info on the device

  Carrier: Rogers (AT & T)

  Model information and the version of the OS: Blackberry 9800, Blackberry OS 6

  Installed applications: Facebook, Twitter, words mingled, Dropbox, executioner

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  Good luck and let us know!

• Memory card blackBerry Smartphones keeps turning off my blackberry...

  my memory card was functioning normally (SanDisk) until yesterday when it started to turn off my bb and any other bb when I place in them... I don't want to lose the my data plz help!

  I even used memory card reader nd itt ddnt work...

  Hello

  To diagnose correctly, follow these steps:

  (1) Insert your card in identical property and known (as it is 100% certain that he can read a card BB) BB... see what happens.

  (2) insert a well-known (as it is already formatted to and useful in a same BB) media in your BB card... see what happens.

  You already point is just 1... According to me but point 2 will give the final decision as to whether it's your card or your BB that went wrong. From what you say, it looks like your press card.

  It also seems that you already have the next thing... using a card on a PC reader. Therefore, it is likely that all is already lost. You can try various recovery tools, but those who are usually much less success with memory devices traditional FLASH with magnetic disk drives.

  As with all things in the category "backup", it's a good idea to copy your media to your PC card whenever attach you it. Of course, it is something that must be done before the problem arises.

  Good luck!

• BlackBerry Smartphones QUICK TURN OFF / ONE RING

  Hello

  I went through the user manaual for Curve 9360; looking for a quick stop ringing/off voltage. Pressing the key 'A' is a quick & easy to lock the keys. Is there a way fast & easy to stop the ringing/disable? If you are in a place where the cell phone rings does not fit, it would be nice to silence the beast quickly.

  Thank you

  Hi Tachyon2,

  Welcome to the BB community...

  Use Curve 9300 n in this when the phone rings, if I press the trackpad, the stop ring (maybe too much work for your model of BB)... best way to stop ringing if suddenly your phone starts ringing at a place where it shouldn't sound...

  Next, you can put your BB "vibrate" mode by pressing the "Q" for 1 second and to change to the previous mode, simply press the 'Q' again for 1 sec...

• Menu "BOLD" of blackBerry Smartphones changes back to default after changing the battery, but changes back when original battery in

  I wanted some advice about batteries for my Blackberry "BOLD". I bought what was believed be an OEM battery so I had a back up when the original battery ran low on the ground outside, etc. But when I turned off the phone and remove the original OEM battery and place my purchase new battery in the phone, the menu has changed the appearance of the default menu and with no icons email I normally 5. The phone works fine, but the email icons disappeared now. If I replace the 2nd battery with the original OEM battery, he then returned to my menu customized with all the messaging icons in the menu.  Can someone please help with this problem. Is this happening because the 2nd battery purchased well stated as an OEM does not have the secure chip and alleged encryption that is used by the "BOLD" BB Phone to ensure that you are using an authentic product OEM Blackberry? Should I just buy the battery via Blackberry at full price or can I get the other distributors who claim to sell the correct OEM battery with the chip but at 1/2 to 2/3 of the price.  Or all the compatible batteries should operate independently without changing my settings and I may encounter an error with my phone, or is there an option that can be turned off in the phone to stop the resets.

  Thank you

  Hello

  I can't guarantee that the use of the OEM battery will fix the problem.

  I have no experience with Mugen batteries, so I can't help with that.

  I don't think that a battery of expensive means better. Specifications only.

  I buy my OEM batteries with the carrier that sold me the unit.

  It might cost a little more, but peace of mind and no warranty problem

  are worth it.

  I think there is a very good reason that RIM makes batteries,.

  and I am not prepared to find out why!

  JMHO,

  Bifocals

• BlackBerry Smartphones phone turns off automatically

  For some reason, my phone (Blackberry Curve 8310) keeps cutting off on its own, and then when I try to turn it back on, it will not. So, I have to take the battery and again to bring it back on. And my phone is not yet dead, or on a low battery. Any help?

  Yes, it's free.

  Follow the directions here and you'll be fine. Perform a full backup of your BB first, using Desktop Manager.

  http://www.BlackBerryForums.com/General-8300-Series-discussion-curve/164898-latest-OS-8310-4-5-0-152...

• Option no. blackBerry Smartphones to turn off the automatic signature

  I just got the blackberry Pearl... and there isn't an option to disable their auto signature "Sent from my BlackBerry® with SprintSpeed Smartphone".  When I go to the e-mail settings (or other parameters in the message section) there is not an option for auto signature or even add a signature.  Any ideas on why it would be or if there is an upgrade that I need to download to be able to disable this option or add a signature?

  I don't use a Blackberry Enterprise Server with this account, but do not know if it matters.

  You must log into your BIS account and click on Edit next to your email and then delete the text in the signature field

• BlackBerry Smartphones how turn off the e-mail attachments?

  I have been informed that it is possible to do, and it'll be important for me when I travel abroad: I don't want to incur large download of attachments when I don't want to.

  Anyone know how I can do this (I have a 8820)?

  Thanks in advance!

  Attachments are not downloaded in the default BlackBerry. They are downloaded only when you specifically choose to do. There is nothing that you need to configure to do this.

• Smartphones blackBerry how to turn off 3G and keeping the smartphone connected to the network.

  How we pearl 9105 deselect option 3G to put off everything using the connectivity with the existing network? Sometimes, because of the power of the battery and connect to a Wifi network for a better internet addition for a couple reasons...

  Manage connections > Mobile network > Data Services = Off.

• BlackBerry Smartphones phone turns off at any time

  Hi, my blackberry9700, bold2 with v.6.0 bundle, who is two weeks off when the battery is still at 60%. I bought three new batteries, hoping that the problem will stop but to no avail. Please I need your help in time is it y a. thanks.

  I had the same problem.  After several software reloads and spare batteries, my operator has replaced the unit.  The memory on Board was bad causing the random restarts.  Please bring to share.  the phone would restart itself if I use it or not.  I hope they do this because it will save you a headache... I know the feeling!

• Software of blackBerry Smartphones problem: Turn Off / Full Power Off function & cannot open programs

  My Blackberrry Bold 9900 always (approximately every 2-5 minutes) appears automatically 'unit is expected to start Jan. 17. 2012 at 06:20 "(it shows always the next day and time that I set up the alarm time). This is issue No 1. So, not until the problem no 2: after ignoring this shutting down - something I want to open any program (WhatsApp, facebook or any other program). But it does not work. It opens just a second and it closes automatically after. BTW, I downloaded yesterday a new version of the software... But the problem exists already the day before. Thanks for your fast support. Nicolas

  Unfortunately not!
  BTW, I called my provider Swisscom yesterday, but they told me it's a software problem with the BB and they are not the problem.
  After calling the supplier, I sent my Bold 9900 back to the retailer (guarantee).
  I hope they will fix it for free in the next few days!

• Display turns off as soon as the administrative permissions are required

  Many programs require administrative previledges to run (i.e. they want to check the updates and install them).  At the beginning I felt the problem was due to display drivers, but now I'm sure that this is due to the system you want to put a request for administrative permissions.  If I run several programs as administrator, they will run correctly.  I tried to change their properties to include 'run as administrator' but I get a blank screen and I assume he's asking for permissions.  It seems that the system performs a swift in view to request the permissions my diver display cannot handle.
  I am running Windows 7 Enterprise on a card mother ASUS A8N5X very with an AMD A64 3800 2.4 GB, 4 GB of Ram and an ATI RADEON X 800 GTO by using the latest version of the driver (8.56.1.15).  I can reproduce the problem in 100% of the time.

  Many programs require administrative previledges to run (i.e. they want to check the updates and install them).  At the beginning I felt the problem was due to display drivers, but now I'm sure that this is due to the system you want to put a request for administrative permissions.  If I run several programs as administrator, they will run correctly.  I tried to change their properties to include 'run as administrator' but I get a blank screen and I assume he's asking for permissions.  It seems that the system performs a swift in view to request the permissions my diver display cannot handle.
  I am running Windows 7 Enterprise on a card mother ASUS A8N5X very with an AMD A64 3800 2.4 GB, 4 GB of Ram and an ATI RADEON X 800 GTO by using the latest version of the driver (8.56.1.15).  I can reproduce the problem in 100% of the time.

  Hello

  Looks like an ati problem, contact them

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• iPod touch cannot turn off and connect to the server

  He always responds to my touch, but it does not turn off when I press the lock button or the lock screen in a long time.

  At first, I tried to open an application, but he was stuck with the logo page, so I thought it re - install but then when I opened the app store it is impossible to connect with the Wi - Fi connection. Then he started does not, stuck with notif center I have accidentally fired. When he locked the door, that I unlocked it and it was back to normal. So I tried to disconnect and reconnect to the definition of id apple, but it says verification failed and I couldn't sign.

  I also tried checking on the software update, but it says unable to connect, and I do not remember whether or not I have updated to the new iOS.

  Help, please!

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• Can I turn off fieldpoint devices if the pc crashes?

  I am running a labview 8.6 application that manages multiple fieldpoint devices, these units are used among others to power phase 3 drive motor. If windows or the application crashes or fails or if the user for some reason any hit CTRL > ALT > DEL or just turns off the PC fieldpoint devices remain under tension, thus leaving the 3 phase power on! How can I make sure that if one of the following situations occur fieldpoint devices are turned off and 3 phases is turned off?

  Configure the watchdog.

  Ben