ASMLIB with UEK / patches Oracle Linux 5 7 Group

Similar Questions

• R12.2.2 certified on Oracle Linux 6.5 with UEK module 3

  EBS R12.2.2 certified on Oracle Linux Server version 6.5 x 86-64 with Unbreakable Enterprise 3 Kernel release (3.8.13 - 16.2.2.el6uek.x86_64)?  I checked the MOS certification matrix and it's vague.  She shows just Linux 6, so my guess would be that it is supported on 6.5, but it does not mention UEK.  Any idea would be appreciated.

  Have you reviewed (Oracle E-Business Suite Installation and upgrade 12 Release Notes (12.2) for Linux x 86-64 (Doc ID 1330701.1)), kernel section "Requirements" which list the minimum requirements? The versions above should be helped for the same version of the OS.

  You can also connect a SR and confirm the same thing with Oracle support.

  Thank you

  Hussein

• Packages, patches, required RPM in Oracle Linux 6 for the installation of the EBS R12.

  Hello
  I am not a beginner and I'm doing a vision of Oracle EBS R12 installation on my laptop.
  
  I downloaded the pack of 3 journalists Oracle Enterprise Linux version 6 update of edelivery.com and installed Oracle Linux on Vmware preinstalled.
  Now, I want to know what all the patches, the packaging and the RPM is necessary as a prerequisite before proceeding with the installation of R12.
  How to check if they are already present and how to install them.
  I have referred to the oracle notes but tangled in what points to be followed and that jump.
  
  Please guide.
  
  Thank you
  Patricia

  swapnil_yeole wrote:
  Hello
  I am not a beginner and I'm doing a vision of Oracle EBS R12 installation on my laptop.

  I downloaded the pack of 3 journalists Oracle Enterprise Linux version 6 update of edelivery.com and installed Oracle Linux on Vmware preinstalled.
  Now, I want to know what all the patches, the packaging and the RPM is necessary as a prerequisite before proceeding with the installation of R12.
  How to check if they are already present and how to install them.
  I have referred to the oracle notes but tangled in what points to be followed and that jump.

  Please guide.

  Thank you
  Patricia

  All BONES and RPM packages can be found in these docs.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID 761566.1]
  Installation of Oracle E-Business Suite and 12 (12.1.1) for Linux x 86 version upgrade Notes [ID 761564.1]

  "Rpm - qa" command to check if the package is installed or not.

  To install the packages, please use "yum install" or 'rpm - Uvh' command.

  Thank you
  Hussein

• PS6100 with firmware version 7.0.5 + Oracle Linux 5.10 + multipathd question

  I try to use the multipath regular linux (device-map-multipath) with my PS6100 and it doesn't quite work. It gives me "readsector0 Auditor reports path is down," "pdu (op 0 x 50000370 itt 0x1) rejected.» Code 0 x 4 reason"errors and my iSCSI connections are reset every few seconds. My OS is Oracle Linux 5.10 (fully updated) and my PS6100 is running with the latest firmware version 7.0.5.

  The latest kit from Dell STRUCK for Linux, 1.3.0-2, works fine on this machine, but the reason why I'm putting multipathd is to compare the performance between the two solution. If we look at the other system we have that run the ordinary multipathd, paths of Dell could give us performance. We doubt it, but we want to do the tests and a comparison of its performance stats.

  We have another server which has almost the same configuration (same OS connected to an another PS6100) and multipathd works well on this one. And one of the difference between this system and no work is that the PS6100 is running on firmware 5.2.5 instead of 7.0.5. I'd be willing to downgrade firmware (this unit is not yet in production, and I don't mind losing the data on it) but I'm not find anything on the internet that show how other that of the "call from Dell and it'll do it for you. If the only thing you need to do is a special command in the CLI then why there is no documentation on this subject?

  So I wonder if anyone here runs a firmware equallogic 7.0.5 with the multipathd of linux and a RedHat 5 of operating system (Oracle Linux, Redhat, CentOS, etc.)?

  Hello

  It is documented in the release notes for the firmware 7.0.x.  There is a bug in Multipathd, which is exposed with 7.0.x. firmware.   Replace readsector0 TUR or ARM and restart multipathd.  Protocol errors will stop and Linux MPIO works perfectly.

  Kind regards

• Oracle linux 7 with Oracle 12 c, it is necessary GUI?

  I will install Oracle Linux 7 and I would get a minimal installation, then I'll install the latest version of the Oracle server that is version 12 c.

  Can I avoid to install GUI? I am interesting to the environment of the text.

  Which type of installation that I can choose? I would choose "minimum installation"

  -Minimal Install

  -Multi server

  -File and print server

  -Web server based

  -Virtualization host

  -Server with a graphical interface

  Where can I find the requirements for the operating system for this version of Oracle?

  Is there before installation for Linux Oracle packages list to the 12 c features Oracle database?

  Why you post the same question in different forums? You have already received a response.

  https://community.Oracle.com/thread/3797527

  https://community.Oracle.com/thread/3797436

  Why is it so hard to understand? The Oracle for Linux database setup is a Java based installer that requires X Window. No X Window - no graphical interface. There is no text based installer. If you do not use any GUI, do a silent install, you can look in the documentation.

• Cluster verification utility Oracle failed with the INS-20802 then install 12.1.0.2 on Oracle Linux 7.1 x 64

  Hello!

  You want to install Oracle Clusterware 12.1.0.2 on Oracle linux 7.1 x 64. When installing, everything was fine, except the last step - utility of Cluster Oracle verification failed with the INS 20802.

  In the log file, I found:

  INFO: From audits to clock using Network Time Protocol (NTP) synchronization...

  INFO: NTP configuration file "/ etc/ntp.conf ' verification of the past existence

  INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs1.

  INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs0.

  INFO: GLWB-1024: the demon NTP or Service didn't work on one of the nodes in the cluster.

  INFO: PRVF-5415: check to see if the NTP daemon or service runs failed

  NEWS: Control of synchronization using network time Protocol (NTP) failed

  INFO: PRVF-9652: Cluster Time Synchronization Services check failed

  also in xml file like:

  < ELEMENT > Network Time Protocol (NTP) < / ITEM >

  < DESC > this task checks the synchronization schedule cluster on clusters that use the Protocol NTP (Network Time). < / DESC >

  < MORE_DETAILS > < / MORE_DETAILS >

  < SUCC_NODES > < / SUCC_NODES >

  < FAILED_NODES >

  < NODE ID = 'pdc-sap-ascs1' > < / NŒUD >

  < NODE ID = 'pdc-sap-ascs0' > < / NŒUD >

  < / FAILED_NODES >

  < GLOBAL_ERROR_DESC_LIST >

  < ERROR_DESC >

  < MSG_TXT > PRVF-5507: NTP daemon or service is not running on any node, but the NTP configuration file exists on the following nodes:

  PDC-sap-ascs1, pdc-sap-ascs0< / MSG_TXT >

  < CASE > the configuration file has been found at a node if no NTP daemon or service was running. < / CAUSE >

  < ACTION > if you plan to use CTSS for time synchronization, then NTP configuration must be uninstalled on all nodes of the cluster. < / ACTION >

  < / ERROR_DESC >

  But of all the nodes ntpd is running:

  [root @pdc-sap-ascs0 ~] # ps ax | grep ntpd

  2214 s + 0 pts/0:00 grep - color = auto ntpd

  19438?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

  [root @pdc-sap-ascs1 ~] # ps ax | grep ntpd

  11492 pts/0 s + 0:00 grep - color = auto ntpd

  19090?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

  So, why postinstall auditor has not found of ntpd running?

  This situation was prior to installation, I started, but this time I ignored the warning.

  Thank you very much for your answers!

  The problem is that in both servers, I want to use ntp, and I wrote in the configuration on both servers,

  Server ntp.myorg.local iburst

  but we use two IPs for ntp, both resolved through dns servers, so in my case the first server got a single for the ntp server ip address and then got another ip. It was a problem and check postinstall determine that the servers use different time sources and do not like this situation.

  Once I changed ntpd config to use ips, check postinstall succeeded.

• Installation of Oracle RAC with Oracle Linux 5.8(64bit) and 11 GR 2 on EXSI 5.5

  Well, I'm trying to install oralce RAC on oracle Linux 5.8(64bit) with 11 GR 2.

  After installation oracle Linux package required by it I m is problem for oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm.

  I triyed with rpm - Uvh oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm and the result is rpmlib (FileDigests) and (PayloadisXz) rpmlib need for oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm

  I triyed with yum localinstall oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm and get an error of public key for 2.0.4 - oracleasmlib - 1.el6.x86_64.rpm is not installed...

  I tried on 3 machines and same result.

  With 32-bit I m not getting any problem

  Found the solution

  the inadequacy of the kernel version and oracle asm

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian

• R12 Quick Installation on Suse Linux or Oracle Linux fails

  Hello

  I tried several combinations of operating systems to try and install correctly using the Oracle R12 / quick installation but I could not. My last attempt was on Suse Linux 10. When the installation wizard is complete, database checks are successful but HTTP server is unresponsive and all subsequent checks fail.

  The reading of google and the various threads on this forum, I found that for Oracle Linux, we must apply the patch that contains libdb.so.2. Since then, I do not have an account to support oracle, I cannot get this fix and based on rules, no body can send it in an email, which means that we can not install this distribution on Oracle Linux without having to pay for the supported. Since then, it is a learning exercise without the use of serious production of R12 apps, we do not have any arrangement with Oracle support.

  For Suse, I also have the same problem, but when I try to start the opmn manually using opmnctl beginning, she responds with message, began. But when I use opmn stopall, the computer stops responding. Now, I don't know yet how to start debugging this problem.

  I would give just to try to install it or there at - it a hope?

  Thank you.

  Hello

  I finally managed to install R12 on Suse Linux Enterprise 10 SP3. I decided to start again after a repair for the past two days. Here's the process:

  a. install Suse Enterprise 10 SP3 with office and all development packages offered in the facility.

  b. click the computer--> install the software--> search for the 'db1 '. It will give you two or more packages. Install db1_185xx (from Berkley). This provides a required libdb.so.2.

  c. then go through the installation as outlined in the instructions using rapidwiz.

  It fills correctly and I can see the login screen now.

  Now, I need to know how to put in place to automatically start all services after startup.

  Thank you for your help.

  Kind regards

  Sohail naima.

• Setting of baud rate with CVI runtime for Linux

  Hello people,

  I have a problem regarding the setting of baud rate with the CVI for Linux runtime.

  I want to communicate with a device that has a USB-to-serial of FTDI chip. The driver for this device is already included in the kernel (openSUSE 11.1, 2.6.27.23 - 0.1 - default i686 kernel).

  I can use a terminal program (HTerm 0.8.1beta) to open the serial port at/dev/ttyUSB0 and can set all baudrates, the unit supports (38400, 115200, 921600) and communication works perfectly.

  Now I take the example of series of NEITHER and go under Windows. I developed to support 921600 baud, and it works very well. So I try to run this example on Linux (I've expanded in order to open/dev/ttyUSB0), but it only works for 38400 baud. If I try to put 115200 or 921600 baud, then I get error RS232-14 (invalid baud rate).

  It would be nice if there is someone who can give me a suggestion what I need to do to get the job to 921600 baud.

  Best regards

  Martin

  Hi NickB,

  the patch done!

  Thank you very much.

  Best regards

  Martin

• Oracle Linux (Red Hat) on 14 t Envy Touchsmart

  I am looking for a compact machine to install Oracle Linux (based on RHEL)

  for purposes of development.

  The 14 t Envy Touchsmart ticked all my boxes (with the exception of the touchscreen) and I'm

  a point where I am seriously considering this machine. I checked the recommended

  material on Red Hat ( https://hardware.redhat.com ) that lists several HP machines,

  who did not understand the desire, but I was wondering if there is a significant difference

  prohibiting the RHEL running on the machine of envy from the officially

  support of the HP machines.

  I understand that RHEL is through a thorough process and some materials may

  do not be taken in charge yet, but I'm ready to compile and install all the required drivers and

  swap the minor components of the material if necessary.

  Essentially, what are the problems that I'm likely to expect in terms of compatibility of equipment?

  A.

  Well, never mind.

  I'll just take the EliteBook 840.

• Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  Hi all

  I tried to apply the patch from Jan 2016 to the Weblogic Server that runs the RMS Application.

  The version of the Weblogic Server is 10.3.6

  The version of RMS App is 13.2.6

  While applying the patch that has a PATCH-LIST of S8C2 on the Weblogic Server, I encountered the following error:

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  After reading the forums, I followed the suggestion to delete the previous patch: EJUW and who has obtained successfully removed as shown below, when I tried to install the Patch Jan complained conflict ZLNA patch and when trying to remove the ZLNA encountered unrecognized patch ID patch: ZLNA.

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = EJUW-prod_dir = $WLS_HOME/wlserver_10.3

  Checking for conflicts...

  No conflict detected

  Removal of the Patch ID: EJUW...

  Result: success

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = ZLNA-prod_dir = $WLS_HOME/wlserver_10.3

  Encountered unrecognized patch ID: ZLNA

  Any suggestions how to solve and apply the fix successfully Jan would be useful.

  Thank you.

  Hello

  Can you please set the download directory of the fix for MW_HOME/utils/bsu/cache_dir/with the help of Smart updated interface and test again.

  To designate a directory to download the hotfix, follow these steps:

  Start the smart update.

  On the Smart Update main window, choose file > Preferences.

  The Preferences dialog box appears.

  In the section Patch download directory of the Preferences dialog box, specify the path to the download patch directory.

  https://docs.Oracle.com/CD/E14759_01/doc.32/e14143/start.htm

  Thank you

  Aishwarya

• The Oracle Linux 5.10 ADR 11.1.1.6.0 installation problem

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to create the web page application online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g

  (2) the server application: Tuxedo 11 g

  3) web server: logic of Web 10.3.6.0

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

  I just finished installing Oracle ADR (Application Development Runtime) 11.1.1.6.0 with Weblogic 10.3.6.0 in Oracle Linux 5.10 Server machine. In step 3 of 8 required checks, impossible to pass the 2 items below:

  (1) verification of recommended operating system Packages (no pass)

  (2) verification of the parameters of the kernel (no pass)

  Oracle Linux 5 is certified with ADR and prerequisite verification certificate of operating system is spent, so, I keep the installation to the end successfully.

  My question is:

  2 items not moved will not affect the development of applications or performance later? If so, how to fix?

  Thanks in advance.

  (1) the parameters are necessary, but the system is running with a lower number. Right in the middle of the execution of your application, enter you the maximum and your system stops. It is best to set the values for the given numbers. When you run the Setup program and go to the test page and the test fails, you should be able to click the test below and the installation should continue. If the continue button is not active, you must correct the error.

  (2) I don't have an oel5 system. Missed, you have not all if necessary values in your limits.conf file? The syntax for the Scriptures is essential. Look at the other lives in the files. How do they look like?

  I guess you need to add a space after the * who would set the setting for all users, or set you it only for user oracle, which is the one you normally install the software with. Check out the tutorial I posted the link with my last post. You may need to add the line /etc/pam.d/login and etc/pam.d/sshd.

  Timo

• Install the ADF 12.1.3.0 essential WegLogic 11 g and Oracle Linux 5

  People,

  Hello. I install ADF essential 12.1.3.0 with WegLogic 11 g with Oracle Linux 5 operating system.

  The WebLogic 11 g and JDK 1.7 have been installed in my machine and work properly for a long time.

  
  

  I downloaded Oracle ADF critical 12.1.3.0 on http://www.Oracle.com/technetwork/developer-tools/ADF/downloads/index.html .

  The tutorial http://orafapp.blogspot.com/2014/07/install-and-configure-ADF-development.html installs ADF with WebLogic 12 c and 3 parts as below:

  Part i: install ADF and set the field of the logic of the Web.

  Part II: creating the RCU for ADF.

  Part III: Configure the WebLogic domain.

  There are 3 files in the package: adf - essentials.zip, adf-essentials-customer - ear.zip and adf-essentials-client - war.zip

  I unzip the file "adf - essentials.zip" and run the file .jar as below:

  java $-jar oracle.xdb_12.1.0.jar

  Error message: cannot load oracle.xdb_12.1.0.jar Main-class manifest attributes

  My questions are:

  First of all, I have to follow the 3 parties above to install ADF 12.1.3 essential for WebLogic 11 g with Oracle Linux 5?

  Second, how to solve the error message above? People allow a tutorial for me to install?

  Thirdly, what are the client 2 client-essentials-adf - ear.zip and adf-essentials-customer files - war.zip do?

  Thanks in advance.

  First you read for example http://docs.oracle.com/cd/E28280_01/doc.1111/e14860/products.htm#FMWLC109

  to find out what license you need, then you buy a license. Discover what you need is the hardest part

  As I said, you must call an OrOracl sales representative or an Oracle partner who can help you.

  Timo

• How to install the web 32-bit server on Oracle Linux 7 (64 bit) for Siebel SWE?

  Hello community,

  I'm being a sandbox Siebel installation in a Virtualbox machine using Oracle Linux 7, Oracle DB 12 c and Siebel 15.5.

  I did very well for all installation process since it became a large number of Frank from previous versions.

  However, I still have a remaining item left which I have not been able to solve: Web server

  Originally, I installed 64 bit version of HTTP Server Oracle 11g of Web tier that filled well.

  However, after you apply the profile SWE logic, web server would fail start given that 32 libraries cannot be interpreted in 64-bit.

  Therefore, I tried to download 32 bit Web layer HTTP server only to find out that I could not even install using the linux32 command.

  Finally, I tried to build my own Apache server that required me to also build apr and apr-util libs.

  It was beautiful.

  [siebel@sbl-lab bin] $. / apachectl v

  Server version: Apache/2.4.17 (Unix)

  Built-in Server: 11 November 2015 00:41:35

  For the Server Module magic number: 20120211:51

  Server loaded: APR APR-UTIL 1.5.4 1.5.2

  Compiled using: APR APR-UTIL 1.5.4 1.5.2

  Architecture: 32-bit

  Server MPM: event

  thread: Yes (fixed thread count)

  forked: Yes (variable process count)

  Server compiled with...

  D APR_HAS_SENDFILE

  D APR_HAS_MMAP

  D - APR_HAVE_IPV6 (mapped IPv4 addresses enabled)

  D APR_USE_SYSVSEM_SERIALIZE

  D APR_USE_PTHREAD_SERIALIZE

  D SINGLE_LISTEN_UNSERIALIZED_ACCEPT

  D APR_HAS_OTHER_CHILD

  D AP_HAVE_RELIABLE_PIPED_LOGS

  D DYNAMIC_MODULE_LIMIT = 256

  D HTTPD_ROOT = "/ opt/siebel/apache".

  D SUEXEC_BIN = "/ opt/siebel/apache/bin/suexec".

  DEFAULT_PIDLOG = ' log/httpd.pid' d

  D DEFAULT_SCOREBOARD = "logs/apache_runtime_status".

  D DEFAULT_ERRORLOG = "logs/error_log".

  D AP_TYPES_CONFIG_FILE = "conf/mime.types"

  D - SERVER_CONFIG_FILE = conf/httpd.conf"

  However, once I started the web server after you apply the SWE, I received the following message:

  [siebel@sbl-lab bin] $. / startapa

  httpd: syntax on line 503 of /opt/siebel/apache/conf/httpd.conf error: structure of the API module 'swe_module' in the file /opt/siebel/apache/modules/libmod_swe.so is garbled - signature expected 41503234 but 41503232 - perhaps it is not an Apache DSO module, or has been compiled for a different version of Apache?

  I've been contemplating installing a chroot, a container or even another virtual machine exclusively for the web server.

  Before proceeding with additional measures that I might regret, could you please how you would proceed in this case?

  Thanks in advance

  Kind regards

  Alejandro Soto Laguas

  Nevermind, I checked certifications and Apache 2.2 should be used instead of Apache 2.4

  Everything is ok now.