Aspire 571 E5 problems reinstalling usb

Similar Questions

• Windows recovery does not. Acer Aspire 571 E1

  Hello

  I have an Acer Aspire 571 E1, then I installed windows 8 pro upgrade to 8.1 pro, now my ram show I have 6 Gig of ram but available only 2.45.

  I tried to reinstall windows, but he used, I tried using recovery of acer (at start up press Alt + F10). nothing happens

  Even when I tried to install I have hollow windows itself, after I get the product key, he asks what I want (Nothing)

  Then, it shows that there are things I need to fix, but there is only a blank page that shows nothing.

  I also tried to boot from the disc, but when I press install now, an error, saying that I entered the product key is not valid. but he never asked a.

  No idea how I might solve this problem.

  Kind regards

  Philip Pienaar

  Hi, sorry, but a friend of mine contacted me on the problem, it has something to do with the Windows I have installed.

  My windows came with the laptop must be resettled and not to try to install windows 8 pro.

  Sorry if I wasted your time, but thank you.

  Kind regards

  [private under the leadership of life]

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.

• Strange problem recognizing USB

  I'm having a strange problem, recognized system repeated for some drivers, as if something (such as a USB flash drive) just to connect to the USB port while nothing has been connected. This happens so often, so you can see the small indication icon flashes next to the clock in the start bar

  Hello

  1 did you change on your computer before this problem?

  2. When you receive this message?

  You can follow the methods below and see if it helps.

  Method 1

  You can run the fix in the article below and see if it helps.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  a.Click Start, click Run, type sysdm.cpl in the Open box, and then click OK.
  b the Hardware tab.
  c the Device Manager button.
  d.Expand Bus USB controllers.
  e.Right click on all devices under the USB Bus controllers node, and then click on uninstall to remove them one at a time.
  f.Restart the computer, and then reinstall the USB controllers.
  g.Plug in the device of USB removable storage and then test to make sure that the problem is solved.

  Restart the computer, it automatically installs the drivers.

• Window vista xps 420 problem with USB ports.

  I have problems with window vista dell xps 420 machine, all USB ports are not recognized, unless the computer is restarted or rebooted. anyone has a suggestion.

  Hi Miguelsmith,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  You can uninstall and reinstall all USB device manager entries and check if it helps.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  You can also consult the following article:

  Tips for solving problems of USB devices

  Hope this information is useful.

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• problem mouse USB

  Hello

  I bought Tohsiba satellite a50-106.

  for this model, I bought the optical mouse A4 Tech AK-5, but after you have connected to comp, it doesn't.
  technicly mouse it's ok, I checked on my desk.

  After connection to the optical sensor usb in the mouse does not light, but there is new message device to find, then comes another message, which is device may not work correctly. Does not install the mouse drivers.

  When I get out the slot usb mouse comes another problem. USB slot is inactive (not see). When I connect diferent peripheral (floppy drive) system not to see too.

  I need to uninstall & then install the drivers for the usb hub.

  If any 1 know whwt 2 so that the work of memo please help me.

  Hello

  Do you have a few with this mouse driver CD? You have the same problem with all three USB ports? Can you also check the BIOS settings if there is option called the pointing device settings. There are a few options. You can change it with the space bar. I don't know, but there must be option called simultaneous or something like that.

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• problem ejecting usb mass storage device

  After the synchronization when you try to eject the ipod's message problem ejecting usb mass storage device

  Are eject you using the eject of the iPod in iTunes?

  If you do not have the case, restart the computer with the always-connected iPod.  After reboot, this problem persists?

• HP Pavilion 15-n203sx: problem of usb 3.0 of 15-n203sx HP Pavilion with Windows 10

  I managed to install all the Windows 10 and some drivers Windows 8.1 left.

  My problem is when I connect my external usb3.0 HARD drive to the USB 2.0 on the right, it connects successfully, but when I connect it to two ports usb3.0 on the left, the HARD drive lights, but it does not appear in windows. I suspect that the ports are not fed enough current (amperage).

  I suspect that the reason is the generic driver from Microsoft for the eXtensible Host Controller:

  

  I tried to install the driver Windows 8.1:

  HP 3005pr USB 3.0 Port Replicator driver 7.6.56275.0 Rev.A

  or https://downloadcenter.intel.com/download/22824

  or http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405424&idx=&swEnvOID=4059&action=driverD...

  But all have failed to install.

  Help, please!

  Hi @ahmedz_1991,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-n203sx and problems with USB 3.0 does not properly. Here is a download that I found for Windows 10 and HP 3005pr USB 3.0 Port Replicator which should solve your problems. You need to uninstall both Intel that are listed, and then install the Windows 10 we. Once the installation is complete, restart your laptop and check the drivers.

  I hope it suits it.

  Please let me know how it goes.

  Thank you.

• My Acer Aspire 571 e5 allows me to connect, but then I get a black screen and I see my cursor

  Hello

  So my Acer Aspire 571 e5 which ive been using for about 3 days just had a windows update. Now, it starts well but I get a black screen when I connect. However, some programs are always able to see and popup randomly. I also tried to go into my bIOS, but it asks for a password that I don't know.

  If you press CTRL + ALT + DELETE you are able to open the Task Manager?

  or try this:

  (1) once you are on the screen of login password, press on and hold down the SHIFT key and click on the power icon (lower right corner of the screen) and restart your computer... (Remember do not type a password)
  (2) you will get advance options. Click on troubleshoot---> advanced---> start---> restart settings---> and select SAFE MODE WITH NETWORKING

  (3) once in office in safe mode, open Device Manager, click on the video card, right-click on it and choose unisntall

  (4) restart and check if it works

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• I have an Aspire 571 V3 that I thought that I was restoring the factory settings and save my files for

  Hi everyone, I hope that there is someone out there who can help me. I have an Aspire 571 V3 that I picked up at the factory settings, or so I thought. After all the files had been cleared and the system recovered it restarted and displayed a black screen with 'the installation program starts services' and a flashing light below are progressing. It has been that way for hours eight (8). is this normal or should I worry? In its current form, I have no control on the machine on the touch pad or mouse. I have provided with Currys computer recovery discs, but they are not to be recognized.

  Kalimera

  8 hours is a little too, you can try to stop it and repair the resumption of the process.

  do a long press on the power button to stop it

  at the next startup, press Alt + F10, and then check if you are able to start the Acer recovery process

  If it isn't

  Enter the BIOS by pressing F2 at startup

  enable F12 boot menu if not already enabled

  Save and exit

  put your first recovery disk on your laptop

  stop your laptop making the long press the power button / stop

  at the next startup, press F12, and then on the startup list select DVD/CD player

• Downgrade of BIOS N100 (problems of USB voltage and battery charger)

  Hello. (Sorry for my English). I have problem with my computer laptop lenovo 3000 n100. I must downgrade my bios to version 1.08, because I have problem with USB - when I click on a button on my keyboard for example my USB was disconnect. Can someone tell me what should I do to downgrade? (Windows XP SP2)

  I have download v1.08, install, but when the program flash my new version of bios of my laptop BSOD 1 seconds...

  Concerning