Aspire 5742 screws

Similar Questions

• Aspire 5742 recovery disc question

  This is a long post.  I went through a lot of steps already.  I'm not an expert in technology, but I read directions well (most of the time), and my knowledge comes from working through the problems as they come.  I use a newer laptop to make different drives and disks.

  I have an Acer Aspire 5742 Windows 7 hp 08. I had a few deep-rooted malware and decided to do a system restore. The system restore worked and the first thing I did was last updated from windows. There were 192 updates and it took a few hours for them to download and install. After the restart, while it was down to the 5 latest updates to install, a message appeared on the screen, indicating that updates failed, and all of the updates would return. Eight hours later nothing had changed. The screen looked exactly the same. I don't know if I did the wrong thing, but I assumed that the restoration was in an infinite loop and made a decision to perform recovery with my Acer OEM drives.

  There is a system disk and the value of three with the Acer recovery disks. I don't know if all the recovery disks work exactly the same but in case they are not, I will include the information which has come to the screen. After the system disk is inserted and that windows support files, the options in this box Acer Recovery Management are-

  Restore OS - OS restore to default factory default status. All the data on the C: drive will be deleted. (It was the option that I tried to use)
  Restore the operating system and to keep the data of the user - only restore the operating system of your PC to the factory default. Your user account files will be transferred to C:\backup. This option does not remove the malware. (When I tried this: no user data were found on your computer)
  Fully restore computer to factory settings - restore your computer back to the factory default state. All data in the hidden partition and the system partition will be restored. Before restoring, please delete all data on the hard drive (when I tried this: Please delete all files from your hard drive before you start.) This function will not work if there is no file on the hard disk.)

  So by clicking on option 1, there's the box in the view of what is happening. The area becomes "restore the Destination."
  The hard drive name: ST500LM000 - 1EJ162 ATA device
  Partition label: Acer
  Size 8.0 GB partition
  Copy of disk files.
  Please insert the restore disc 1.
  Copy of disk files
  Insert disk 2.
  Copy of disk files
  Insert disk 3 (it is 80% complete)
  Copy of disk files.

  Shortly after that the disk turns on a message box appears saying "There are not enough disk space for the temporary files needed for this operation"

  Press Ok. Wait a minute please. Acer boot screen then back "BOOTMGR is missing. Press Ctrl + Alt + Delete.
  Pressing C + A + earrings back to the boot screen Acer and return to "BOOTMGR, etc.".
   
  The original crapped out drive and I replaced it with a hybrid 500 GB drive.  I have partitioned the hard drive for the upgrade of windows 8, which was offered when I bought the laptop.  I rarely used it, and it remained a 20 GB partition.  Think that the partition might be the problem I downloaded the portable computer Wizard mini partition my new tool and copied the files to a CD, a DVD and a flash drive.  All contained errors. Failure of the Conference on disarmament.  I tried another, he sounded like he was going to start and then returned to the screen BOOTMGR.  I pulled out a blank dvd, copied the file .iso from the score to it. The message on the screen: drive hard virtual cannot be mounted from image files or from removable media that is not formatted with the NTFS file.

  I dug around and eventually find my flash drives. The flash player has a default FAT32 and I changed to NTFS (based on the above message) and formatted. I copied the file to the partition.  The message on the screen: a BONE was not found. Try disconnecting all drives that do not contain a BONE.  I made in all attempts above that I changed the boot order in the bios.

  I tried another flash drive and kept the default FAT32.  It would sound like he was trying to start then:
  PX - E61 Media test failure. Check the cable of
  Output of MOF broadcom PXE

  What I am doing wrong?  What can I do to correct this player so that it be cleaned?

  I forgot that I had an external enclosure for a hard drive, so I took out the hard drive for Acer and it subservient to my new laptop. I bought it when the original Acer hard drive became corrupt to try to look at the files. Here I am trying to understand the hard and a less complicated solution (for me) was at hand.  Of course, he had 4 partitions with only 8 GB for the Acer.  Don't know how it happened.  I am planning to wipe the disk completely and using the disks from Acer to start all over again.

  Please accept my sincere thanks for taking the time to help me.  I learn something new every time I have to correct a problem and without the help of message boards I would be screwed.

• Need to find the correct reference for replacement screen Aspire 5742

  Hello

  I need to find the correct part for replacement screen Aspire 5742.  The backlight does not work anymore, and I already bought a UPS to see that this model/version does not use a UPS (as the backlight is LED and integrated in the element of the screen).  I find the somewhat confusing model numbers table.  The full model version seems to be:

  5742 - 464G50Mnnk

  S/N: [redacted to comply with guidelines]

  SNID [redacted to comply with guidelines]

  This seems to be a very good laptop that belongs to a mine Guigou, but not worth repair at the local dealership, and I'm sure I can replace the screen myself if I can get the right part, having already dismantled the set of sieves and to be an electronic engineer.

  Either way, I guess that this version of model is the 5742, not the 5742 G (even if the model number has a 'G' in it: some of the confusion).  Any help would be appreciated.

  Part numbers for the 15.6 TFT LCD for the Aspire 5742 are:

  LK.15605.004
  LK.15605.010
  LK.15606.009
  LK.15608.007
  LK.15608.011
  LK.1560A.004
  LK.1560D.010
  LK.1560E.004
  LK.15605.019
  LK.15606.012

• How can I know which series my acer aspire 5742 is?

  I have a question in a discussion forum, but don't know what Ant to publish on.

  Can someone please advise.

  Thank you

  Go to discussion (header) > mobile > netbooks and laptops Legacy. You will be able to create a topic on your laptop in this group. Aspire 5742 is a legacy laptop (old model).

• I need to my Aspire 5742 is recommended to replace the battery, but what size/type of battery do?

  I need to my Aspire 5742 is recommended to replace the battery, but what size/type of battery do?

  I find nothing in the settings or anywhere on the PC that gives me the necessary information.

  Hello

  1. This battery is compatible with your laptop.
  2. Here are the original batteries (first column) references:

• Aspire 5742-6798 UEFI boot problem

  I have an Aspire 5742-6798 provided with Windows 7 installed.  Someone tried to upgrade to Windows 8.

  Now, the laptop isn't even trying to boot from the hard drive. It goes directly to the initialization of the network.

  I started from the 8.1 Windows installation media and clicked on "computer repair". I tried a reset, which has almost immediately. Discount did the same.  I went with Options in advance and went to a command prompt. bcdedit gives:

  "The boot configuration data store could not be opened.

  The requested system device cannot be found. »

  DiskPart displays all partitions and volumes, normal and healthy.  volume of the list shows:

  Acer volume 1 C NTFS Partition 579 GB healthy

  Hidden 2 RECOVERY NTFS Partition 600 MB Healthy volume

  Hidden 3 ESP FAT32 Partition of 300 MB Healthy volume

  Volume 4 Partition 15 GB NTFS healthy hidden button

  So I would like to boot from the recovery partition, so I can restore the default out-of-box laptop.  I suppose one of these partitions would do what I want.  Car-Alt + F10 does nothing to start.  Hard disk is configured for TPG.

  How can I select a partition to boot from?  I know that I did a time, years; but I don't know how I did it.  The fact that the laptop uses UEFI change everything?

  Thanks in advance.

  CJ

  Someone please mark this resolved.

  I'm a fool.

  The laptop isn't UEFI.  This is why I couldn't manipulate the GPT disk.

  Sorry for wasting time in person.

• Acer aspire 5742 goes from black to a screen that says acer enter startup f2 then back to

  My acer aspire 5742 doesn't start correctly, it goes from a black screen to a screen that says acer enter startup f2, then alternates between these two screens.

  Right now I have managed to turn it on and I'm in the treatment of support up to an external hardrive.

  I rang acer support and they told me I did this install windows 10 (about six months ago) and although he seemed fine, it was corrupting the (motherboard? I think that's what she said). the lady told me that I should restore laptop to factory settings.

  Can someone please confirm for me that's what I have to do?

  The fact that you were able to start normally after F2 in the bios menu, F9 to re - set the bios to factory default then F10 to save this setting, the default BIOS * strongly * suggest that the bios was losing his in the memory of the specific hard drive that was installed.

  Jack E/NJ

• Acer Aspire 5742 G died. I think the BIOS is damaged because all I get is a blank screen.

  I was a heavy task on my other laptop and I wanted more RAM, so I decided out of the 4gigs of my Aspire 5742 G only to find out that this is not not a 4 × 1 GB of RAM (instead a 2x2gb DDR3). All I've done is out of RAM, I saw that it was only 2gigs and put in (nothing else, I know my way around computers quite). Then I thought to share work on the network, only to find out that my Aspire 5742 G will not start. Nothing. Not eveb the Acer logo appears. Access to the hard drive led is always off (not a single blink). Terrified. I thought it would be to display, but like I said the HARD drive light flashes once again.

  So I jumped to Google. Discovered it probably a BIOS problem. So I downloaded the BIOS Acer will, comes to be welcomed with a ZIP file of gibberish. I have no idead how to use this ZIP to update my BIOS. The exe file is not good as the PC starts no and all other methods seem unlikely given the boot selection is not yet possible.

  Can someone please guide me to the right maybe average to refresh my BIOS?

  Thanks in advance,

  PC Info and specifications:

  Acer Aspire 5742 Series
  Model No.: PEW71
  Aspire 5742 G-374G50Mnkk
  MFG Date: 1011
  Current OS: Windows 8 Pro
  Original OS: Windows 7 Home Premium
  RAM: 4 GB (2x2gb) DDR3
  CPU: Intel Core i3 - 370 M
  GPU: ATI Mobility Radeon HD 5470
  HARD DRIVE: 500 GB 2.5 "SATA

  [private under the leadership of life]

  It may be almost impossible to diagnose a problem remotely, I hazard a guess and suggest that your problem has nothing to do with your BIOS.

  Given your description of your actions, I would recommend you check and double-check your RAM seats. Also, make sure there is no damage to the socket. There is also the probability that static was able to destroy the RAM. You may need to try known good RAM to exclude this possibility.

  It is not always possible to update a BIOS if there is a hardware problem.

  Of course, I can't risk a BIOS Setup until there is absolutely no doubt that a problem does not exist elsewhere. If an update attempt fails, you might find yourself worse. In short, make sure that your RAM and the seating is 100% before looking elsewhere. Your choice of courses.

• Aspire 5742 Bluetooth Stacker stopped working.

  Immediately after, boots mobile message "Bluetooth stack has stopped working". There are two options 1) search on the web for the solution and close the program 2) close the program. There is no need to select option 1. It provides no solution or information about the problem. I tried all of the solutions provided by Windows Help. I also deleted the "Suite Bluetooth Win 7 (64) and pilots." the same error occurs after relaoding after the software and drivers. I can't connect to any Bluetooth device without encountering the error. Is there a solution? If not, are there other available software that are compatible with the Atheros Wireless adapter included with the Aspire 5742?

  Thank you for your response.

  Since the last version of the driver has not fixed my problem, I reloaded the operating system, programs, and drivers. Now the bluetooth works properly.

• ACER Aspire 5742 i5 with 16 GB of RAM?

  Hello

  I have an Acer Aspire 5742 i5 model, now with 8 GB of RAM.

  I tried to install the two 8 GB DDR3 modules, but the machine will not work. It will boot, but crashes on Ubuntu when I connect.

  I tried memtest86 and it crashes almost immediately.

  I've already updated the BIOS with the latest version I could find (1.30), but not luck...

  When I go into the BIOS, he notices the extra memory, although the screen shows only 4 characters (6384 instead of 16384).

  I tried just one 8 GB modules, one of them with another 4 GB (12 GB total) etc. All attempts have resulted in the same way: Boot, but the accident.

  Officially, I know it supports only 8GB, but the other laptop where I write is also an i5 that officially goes up to only 8 GB, but is now happy with the same memory modules...

  So, I was wondering... is - this really impossible to have 16 GB on this model? Or is there a workaround? I searched (Google takes me...) and I couldn't find a solution...

  At least, I would like to know the reason why it does not work... BIOS?, Chipset? CPU?

  Thanks in advance.

  Hello domusonline,

  You said "I have an Acer Aspire 5742 i5 model". For example, the processor Intel Core i5 - 480 M processor---> max memory size: 8 GB.

  Check your model of processor on the Intel site.

• Aspire 5742-6682 Please HELP with recovery installation question

  Help, please!

  I had to replace my HD after an accident on my ASPIRE 5742-6682 laptop and I got an Acer restore disk set and tried to fix it today.  After loading the disc and reboot, it started to load all of the WINDOWS and the drivers... etc.  Must "install LITE-ON crystal eye... utility. "(29 42 installs) and has been stuck there.  Another pop-up - Acer Crystal Eye webcam Installation Wizard window (and said) ' the web camera is not found! Please plug in the camera and try the installation again. »    .. .one problem with this solution, is that I have no camera to connect. The single camera or video camera is built into the laptop. How to solve this problem or go beyond that, the rest of the installation can be completed?

  Thanks, DD

  Please see this link:
  http://community.Acer.com/T5/community-KB/using-Acer-Crystal-Eye-webcam/Ta-p/55951

  Please see this link:
  http://community.Acer.com/T5/community-KB/reloading-your-Acer-computer/Ta-p/45793

• Aspire 5742 usb3 now usb2 with windows 10

  When 10 Windows (shiny) on Win7 your USB3 cabability is lost, it is up to the USB2 only, because there is no update available from ACER for existing laptops driver. ACER can indicate how to obtain a driver USB3?

  Thank you in advance.

  Uh, Acer Aspire 5742 features USB 3.0 capabilities?

• Aspire 5742 will not get past Windows screen

  I have an Acer Aspire 5742 w/Windows last week. He has worked for several days, but nto starts today; It's not beyond the screen of Windows (with Space Needle).  Different keys tab and c + a + del does a dark blue screen and tells me to "Please wait".  The drop-down menu near the top of the page ot the needle on the screen has the same effect.  (Mouse works fine)

  How can I get the laptop to go to work?  I am currently using my old computer for this message.

  What happens when you press on & hold the power button until it stops, then press again to start system cold?

  Jack E/NJ

• Acer aspire 5742 does not start

  Hi all hope you can help - I have an acer aspire 5742 running windows 7. the problem is that it doesn't start not until after bios acer launched toward the top of page and just continuously loop around. F2 and F12 keys available no. function F8 or F10. tried to re-don't boot from the recovery disk no joy. Startup disk in the bios change still no joy. Cannot make a secure boot or system reset as unavailable F8 and F10 keys.

  fan does not (not over heating)

  HD is running

  can you please help

  Hi - I've worked with thanks to you all, I'll wish to explain how to fix at the base.

  1 - Download partition manager free 2014. http://www.Paragon-Software.com/home/pm-express/

  2. run the partition manager and select go delet.

  3 - Select the partition that has 100 MB space and delete

  4. then select the larger partition and delete.

  5 - turn off the power to the laptop

  6 - Turn on the laptop

  7. when the acer page appears, press ALT + F10 ONLY once.

  8. then I chose to install full. higher setting.

  Bingo it completed the complete installation without blocking upward on the desktop.

  This has been mentioned somewhere else where but should be simplified.

  hope that it all works for you.

• I can't stream the video of my Acer Aspire 5742 on my Sony Bravia KDL-55NX720 Windows 7

  I can't stream the video of my Acer Aspire 5742 to my Sony Bravia KDL-55NX720, Windows 7

  Hello

  1. what happens when you try Acer laptop to Sony Bravia TV videos?

  2. do you receive any error messages?

  3. it worked before? If Yes, did you changes to the computer before the show?

  4. you use a wired connection or wireless to connect TV and laptop?

  I suggest you provide more information about the issue so that we can better help you.