Feedback sound and shrill noises

Similar Questions

• Premiere Pro CC - impossible to H.264 encoding & its used to load as inaudible feedback sounds, and now he is not good at all

  Holy damn, I'm stressed. So I launched a channel on YouTube and I had to get a video out about a week ago. I have a new laptop on the 4th (Lenovo y510p) and transferred to this laptop to a Macbook Pro. On my Macbook, I had absolutely no problem making and editing videos using Quicktime Player and Final Cut Pro X, but now that I have a Windows computer I have no idea how I'm supposed to run lots of those things. Let's get into the details:

  I bought Bandicam, started to record, had a really good clip that I was going to use for the video, and then I'm going to change (the clip is .avi and H.264 btw). So I'm going to drag and drop it in first and it cannot load in because it's a file unsupported or damaged. Turns, I can't load this file into ANY software. I tried to install the drivers for H.264, but I don't know if I installed it right or it did not.

  This is my first problem.

  The second problem is that when I worked my way around H.264 encoding (and recorded in MPEG-1), he loaded in the first, but he played the Larsen effect where my voice would go. I spent an hour or two, try to fix it and looking upward in order to do it, but no luck. Finally, this is just no sound. Nothing at all.

  If you guys can help me, it would be fantastic. Thank you!

  I use Bandicam for screenshot and when I imported into first the audio should sound like noise. I was able to solve the problem of audio by changing the audio codec bandicam uses.

  Open bandicam and go to the video tab and then in the format section, choose settings and under audio change the codec on pcm.

  I hope this helps.

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• bottleneck of apparent control "sounds and audio device properties | audio tab | sound

  Lately, this becomes a little more than one gene, to the point where it seems there are already some solution out there : I often want to spend (internet radio or mp3s) music that I send now based Creative Media USB "broadcasting" (home use - audio send anywhere where I could want him in my house)-for a random downloaded video programming.  Video noise must never be sent to the speakers of my monitor-entertainment (although I wouldn't mind if that sound signal should also go through the creative system to other points in the House.)  But it's scary, sometimes I have to play music, to turn on the monitor and sauté with the music of great volume until I can mute or mute the volume.  But it is never necessary for my music be routed to the monitor.

  I drive the monitor via a HDMI cable and adapters changed just after the last of them went wrong, so the new audio software NVIDIA can get complicated this unduly now.  But it seems that the only way for me to join the audio track from any video source given the monitor is to go through the tedious process to navigate to the audio tab and then change the default devices of the Creative device to the NVIDIA device.  If I have already started the video until I realize that I am still set up for music, I have to leave the VCR and the restart before it will route the audio through the HDMI.

  Then of course if I want to stop watching the video source and go back to something with music as a background, I must reverse this procedure as a whole.

  More complicated still is the panic that can ensue when I receive a Skype call - it can be quite EXPLOSION on the monitor speakers.  These levels seem to chronically inadequate because I assume that they share the same slider control as something else (it's still too low volume without be turned up to 11) and are not put to level automatically, or something like that...

  Certainly I'm not the only one annoyed by these audio problems.  What are the solutions are there for these problems?  I would like to be able to choose speakers, based on sources: mp3s and other audio-only stuff would be default to the Creative device, while avi and other video stuff would be only of course exit by default for the NVIDIA card.  Seems kind of obvious... but it does not work like that?

  Hi 808pants,

  You can try to change the settings for the audio mixer Panel to help relieve this problem:

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  In addition, most programs can be configured to use a specific audio adapter. In the case of Skype, you can check the following link to set up Skype:

  http://www.Skype.com/help/guides/soundsetup_vista.HTML#4

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Unless the program is designed to specify the audio adapter, the only way that you can choose where will the audio is by setting the audio adapter by default.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A30-921 PSA33E - no sound and the missing "speaker" icon

  Some time ago, I lost the sound and also the missing "speaker" icon.
  But the sounds in the control panel and all its grayed out. Restarted the system and everything has been restored.

  Once again lost both and rebooted but is more than this noise of restoration. Icon was back at the helm of the tasks, but when you click on it, all greyed out.

  Uninstalled the audio driver and used the disk utility to try to restore the sound, but does not work: visited the download from Toshiba site and I tried the Realtek driver, no luck. Checked with my Bios Update and I have the latest version.

  What is going on???

  If anyone can help...

  Congratulations to all.

  Hello

  I think that you must first remove the old sound driver.
  Check if there is an entry in Control Panel-> Add & Remove programs.

  In addition, you should go to the Device Manager and should remove the sound card in the list of devices.
  Just mark the sound card and remove it.
  Reboot the laptop.

  After that restart of the operating system (Win XP) should start looking for a new device and should ask the audio driver.
  This is the time to point the driver package, and files that you downloaded from the Toshiba European page.

  Check to see if that would help!

• Accident sound and graphics of P200D-11R satellite after the awakening of the mode standby

  Hello

  I was wondering if anyone here has had experiences similar to mine (below) or he can offer solutions.

  I have updated my OS P200D-11R for Vista 64 Ultimate to take advantage of the additional performance. I also add that the BIOS has already been updated to version 1.4.

  Well, everything works fine with the standard 2Gig of RAM that the laptop came with originally, however, when I update the 4Gig RAM (2 x 2 GB Samsung 667 mHz modules), sound problems and graphics appear each time that the machine is reduced from mode 'sleep'.

  The soundcard is a noise fuzzy laud very whenever he wants to play a sound and graphics to produce a lot of horizontal lines on the screen. I then just restart the machine which means losing all my unsaved work.

  Everything works fine as long as the machine is not fashion "Eve". Currently, I disabled sleep mode to prevent the machine from entering, but I find life very difficult without it.

  I am very surprised and also disappointed by the fact that Toshiba didn't test these machines with Vista 64 Ultimate and 4Gig of RAM!

  Additional info:
  Memory is the same type of Samsung as 1Gig modules supplied by Toshiba initially with the machine, and the Toshiba part number is recommended.
  I tried to install other (newer) device drivers from Realtek and ATI with no improvement.
  Memory modules all trials and are not defective. They have also been tested on my laptop Dell friends without any problems even in mode 'sleep'.
  I installed my friends 2Gig Dell memory modules in my P200D and they produce exactly the same results with sleep after accidents.

  My thoughts are that it must be another problem of BIOS unless anyone can shed some light on the question from another angle.

  Help, please! Thanks in advance.

  > Well, everything works fine with the standard 2Gig of RAM that the laptop came with originally, however, when I update the 4Gig RAM (2 x 2 GB Samsung 667 mHz modules), sound problems and graphics appear each time that the machine is reduced from mode 'sleep'.

  So if I understand this right, everything works fine using the standard RAM modules.
  In my opinion, the problem is caused by the new additional RAM.

  I have no idea why this happens, but in my opinion, it would be really interesting to know if this problem still persists with other memory modules live.
  I think this should be verified without a doubt because in this case, you might find what? s evil exactly!

• Practical measurement "sound and Vibration Assistant.

  Hallo,

  ICH möchte eine Maschine von Gerauschemissionen untersuchen. Dazu soll mit Hilfe der Norm DIN EN ISO 11201 der emissions-Schalldruckpegel altitute werden. ALS Messhard-und software are mir following components available:

  Software:

  -LabVIEW 2010
  -Noise and Vibration Assistant 2010
  -Windows 7

  Material:
  -NI 9234 Messsystem mit NI USB-9162
  Condenser-Mikrofon
  -Laptop

  ICH möchte mit dem 'Sound and Vibration Assistant' ein Oktavspektrum bzw. Ein 1/3 - Oktavspektrum-> Terzspektrum aufnehmen. Dazu sind mir ein paar aufgekommen questions.

  -Laut Norm is die Messdauer bei measurements in 30s Oktav-Terzbandern fur Frequenzbander mit Mittenfrequenzen von 160 Hz low sowie für die 15s und Frequenzbander mit Mittenfrequenzen von 200 Hz und high.

  • Wenn ich alglemein eine measurement starte andert sich jede Sekunde bei einer sampling frequency von 51, 2 k und den zu lesenden 51, 2K das all Spektrum von samples. Also jede Sekunde ein neues result. Wenn ich also 30 Sekunden mass, means are dann, dass ich aus 30 results (Pro result ein entire Terzspektrum) den Mittelwert bilden kann bzw. muss?
  
  
  • Wie ich dann die unterschiedlichen Aufnahmedauer auf die Frequenzbander anwenden should? Should ich die highest frequency und niedrigste frequency q und dann der Zeit messen vorgegebenen correspondingly?

  -Laut Norm should as jedes Frequenzband eine Pegeldifferenz von mind. 10db zum Umgebungsgerausch available breast.

  • Also ich z.B. das Hintergundgerausch über 30 Sekunden mass. Dann jedes Frequenzband über 30 Mittelwert den Werten as image. DAS same mache ich dann bei Betrieb der Maschine. Kann ich dann die dB values direkt miteinander comparisons sprich Gabriel bilden die um zu sehen, ob die Pegeldifferenz 10dB kleiner oder grosser ist oder muss ich eine Logarithmische Pegelsubtraktion paper? nach der Formel section = 10 * lg(10^0,1*L1-10^0,1*L2) z.B.?

  -Wenn ich den aquivalenten Dauerschallpegel Leq messen möchte, die Die Formel Gesamtmessdauer wo mit einfliesst, wird dann der Mittelungspegel über eine Sekunde bei einer sampling frequency von 51, 2 k und den zu lesenden samples von 51, 2 K berechnet oder ist das result über die ganze Messzeit (wieder 30 Sekunden z.B.) berechnet worden? Oder ich aus den werten eine weitere Mittelung paper individual should?

  Viele Grüße

  Hallo Voyage200,

  Wenn ich alglemein eine measurement starte andert sich jede Sekunde bei einer sampling frequency von 51, 2 k und den zu lesenden 51, 2K das all Spektrum von samples. Also jede Sekunde ein neues result. Wenn ich also 30 Sekunden mass, means are dann, dass ich aus 30 results (Pro result ein entire Terzspektrum) den Mittelwert bilden kann bzw. muss?

  -> Should der Arbeitsspeicher gross genug breast ware are ermöglichen das auch Signal 30 Sekunden gepuffert mit dem mittelfristig-Verbraucher-Entwurfsmuster appears und die exported analysis often.

  Wie ich dann die unterschiedlichen Aufnahmedauer auf die Frequenzbander anwenden should? Should ich die highest frequency und niedrigste frequency q und dann der Zeit messen vorgegebenen correspondingly?

  -->--> Als Tipp Ja am examples of Anfang arbeiten mit den einfachen und Express VI. Powerful exported Programmieren mit den Low Level VI.

  I hope sharp Antworten helfen Ihnen weiter

  und verbleibe mit thank wurde

  Lorenz Casper

• Sound does not work. Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.

  Original title: audio device problem
  just reinstalled windows xp.  Sound does not work.  Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.  Microsoft Fix it, but the best I get is "do not set as default audio device.  The lack of sound recording does show a device.  Ideas?  BTW, I sometimes get static noises out of the speakers.

  Hello

  I suggest you to follow the steps from the link and check if it helps.

  No sound in Windows

  I hope this helps.

• I can't change "sounds and audio devices" in the Panel

  original title: I can't change "sounds and audio devices" in the control panel after the update my card NVIDIA vidio driver and Microsoft DirectX in my Windows XP SP3 update.  How can I fix it?

  I recently updated my card (NVIDIA GeForce 6800 GT) video driver and Microsoft DirectX after you have experienced a problem with a casual game.  That fixed the problem, but then I noticed that my sound 'e-mail notification' had failed in its original supplied with Windows.  I changed "Sounds and Audio devices", registered, registered as a new regime, etc., and still plays the old default Windows sound.  It was the only noise I had on Windows.  When I check "Sounds and Audio devices", the sound, I have chosen is the one listed, and it does not play when I check, but when the mail arrives, I hear the old Windows by default.  I don't know if the updates, to happen or not, caused only that it took place at the same time.  Thanks for any help you can give.

  Thank you for your suggestions.  It turns out that my e-mail client, "Eudora", had somehow reset the default mode in the Windows sounds.  I forgot that there is a choice to "Be careful" in Eudora Tools.  After I changed it back, it worked perfectly.  Once again, thank you to answer me.

• Lose sound and resolution

  Hello

  All in one shot, I lost sound completely and since last night, I also lost the resolution too and now I work with very weak graphics and no noise at all.

  There are many other functions that I can't use more for example, I can't download a video recorded.

  I would be grateful if you can help me.

  Thank you very much.

  Fareed Saiepour
  removed phone number *.

  Hello

  · Were there any changes made on the computer before the show?

  · What is the service pack installed?

  Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  You can also check the link: no sound in Windows: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• Sounds and Wi - Fi are unusable after the awakening of Windows XP SP3 of stand-by

  original title: XP SP3 cannot wake up from standby correctly

  I recently upgraded my system from Windows XP SP2 to SP3 and installed onenote 2010 professional office 2010 but still not active. I found if I maintain my system, and cannot be used as alarm clock, sound and wireless.

  When I click the speaker button, I can hear the sound of 'Bang', which implies a mistake, and a pop-up box displays saying that «...» No audio mixer table cannot be found... ». I can't play music or watch the video.

  When I find out wireless available in the range, he said: "another program manages wireless" these words. But I have installed no utility to manage my wireless.

  There could be another problem. So far, I find just above two.

  After the system restarts, everything is recovered, until next time, I stand by my system.

  Hi Edwin.Xi,

  Given that you have upgraded your system from Windows XP SP2 to SP3, you may need to consult the manufacturer's Web site and download and install the latest version for Wi - Fi and sound drivers and check if that helps:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  You can view the following articles in the KB for more information:

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Loss of system sounds and the internet, speakers pass test.

  I have seen this issue a couple of times for its complete loss, but only once for my specific problem.  I am running Windows Vista 32 - bit OS with speakers Realtek High Definition Audio on a HP Pavilion Media Center m7760n.  I have run the diagnostics on my speakers and that they work properly.

  Here's my question:

  Lost computer system sounds and flashplayer/internet despite the audio device in place and work properly.  I still have sound when playing Windows Media Player and iTunes, so it doesn't seem like a problem of device or driver, although I did uninstall and reinstall the driver.  I also performed some diagnostics on the speakers and in the test that they did play sounds, but they haven't played the system sounds in the sounds/system folder.  Another strange appearance is the presence of the sound of my PC, an alert tone, I don't remember having heard it before and cannot be bound.  These are the programs that have been installed around the time I lost sound: Windows Update, Package of device driver of network adapters Apple and Serial Bus controller device driver Package universal of Apple, Inc.  This computer has always run Vista, so is not upgrade, and I don't think it's a Service Pack, it could only be that of the update, so I don't know if these answers would really help me.  I searched on Google, CNet, HP and the basis of knowledge of Windows without success.

  Here is a link to a question from CNet which reflects mine, but relates to the execution of a registry cleaner, that I did not.  http://forums.CNET.com/5208-12546_102-0.html?ThreadId=345265

  I read on one of my research about it being a registry with Flash or a missing codec problem, but it wants me to download K-Lite codec pack which I don't know that I need.

  I run a restore if there is no available answer, but it would be good to know what the problem is.  I can't be the only one with this problem, if there is someone out there who knows how to solve this problem, your help would be greatly appreciated!

  Terri,
  If this problem started when you downloaded the updates listed in your first post, you tried to remove these updates to see if the problem goes away?  What are the Apple updates that you noted in your post - what kind of Apple devices you have installed?  And what Vista update - what is has been downloaded just before this problem?  Just try to identify what it is a very strange problem with it only affects some sounds, but not all.  I know that some Vista updates can return drivers for Windows by default, crushing the drivers from the manufacturer, so you could check and make sure you have the latest drivers from the manufacturer and not the default Windows drivers.  Also check your templates of sounds in the control panel.  Try selecting different models of sounds to see if any of them will play sounds.  As a first step, you said that the sound works with Media Player and iTunes, but in your last post, you said that it gives you an error when you try to play a CD.  What is the exact error and what program are you trying to use to play the CD?  I know that you do not want to do the system restore, but you may need.

  Here's one thing to try before you perform the restore:
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  LST know us if this has been helpful for you and how we can be of further assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Lifecam VX-1000: sound and picture out of sync.

  I bought a webcam for my laptop (VISTA). Microsoft LifeCam VX-1000. I can not get the video and synchronized sound. With software or with Skype.

  How can I solve this problem?

  Thanks for your help.

  Hello Ben-01,

  1. have you installed the latest drivers for the Webcam?

  I suggest that you try to check the Audio settings and video with Windows Live Messenger Web cameras are optimized with Windows Live Messenger. You can see the underside of section which will give you information on Audio and video settings:

  http://support.Microsoft.com/kb/921332

  Also try to download and install the latest drivers for the webcam. Here is a link you can follow to download the latest drivers:

  http://www.Microsoft.com/hardware/download/download.aspx?category=ice

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Not plugged into the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Original title: high speed HDMI does not.

  I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Hi lisa,

  Try these steps and check the result.
  Step 1: Manage audio devices
  a. Click Start and then click Control Panel.
  b. click hardware and sound.
  c. under sound, click on manage audio devices.
  d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
  e. Select the device and click on set as default and then click OK.

  See http://support.Microsoft.com/kb/953500

  Step 2: Graphics output to monitor
  a. right click on the desktop, click chart options.
  b. output to monitor.

  Step 3: Adjust graphics hardware acceleration
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: Some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider at different levels and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sound and image's market during video playback by electronic mail.

  Original title: videos sent in emails

  Sound and image's market during video playback by electronic mail. (IE, trailer attached, you tube)

  Hello
   
  
  1. How do you access the email? Using any email or via an Internet browser client?
  2. If you are using Internet explorer, which version is installed on your computer?
   
   
  Method 1.
  Given that most online videos require Adobe flash to work I suggest you install Adobe Flash player in Internet Explorer.

  I recommend you update Adobe flash player from the website below:
  http://get.Adobe.com/flashplayer/

   
  Method 2.
  a. If the problem persists, you can optimize Internet Explorer.
  See the link below for more information.
  How to optimize Internet Explorer?
  http://support.Microsoft.com/kb/936213
   
  b. If nothing works to solve the issue try reset Internet Explorer.
  How to reset Internet explorer:
  http://support.Microsoft.com/kb/923737
  Note: After resetting Internet explorer you will need to install Java runtime library and Adobe flash again.
  WARNING:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.