Aspire AX1430G motherboard (D1F - AD v1.0) power supply

Similar Questions

• Power supply replacement for Acer Aspire x 1800 desktop mini

  I need help to identify what supplies I can get to replace the rather noisy in there.

  Also, if anyone knows about the actual model and details of one that comes with (pines, watts, efficiency) that would be appreciated.

  Once I bought a replacement and it didn't fit because of the very compact housing.

  Thanks in advance.

  Well, in regards to the power, I think that a 220 watt power supply will do. Regarding the size, if you live in America, I take to Tiger Direct and let them help you. They are very friendly and intelligent. Help most basic is free. It wouldn't hurt.

  They carry several alternative energy supplies. They wear very probably one you need.

  After checking, it looks like the power you need.

  http://www.eBay.com/ITM/new-genuine-Acer-Aspire-X1700-X1800-X1900-X1920-X3100-X3200-power-supply-220...

  Here is the link where I got most of the info:

  http://www.CNET.com/products/Acer-Aspire-x1800-u9002-core-2-Quad-Q8300-2-5-GHz-4-GB-750-GB/specs/

  Most of the supplies are about the same size. But I can't say its size for a mini.

  But again, you could call Acer for most of the information you need.

  CoolJoe

• Qosmio X X 770-11 - new motherboard and power supply for sale

  Brand new motherboard and power supply for sale

  Posted by jtk
  

  Brand new motherboard and power supply for sale

  Also Intel® Core i7-2670QM CPU
  4 096 + 4 096) MB, DDR3 RAM (1 333 MHz) memory
  1 000 hard drive (Solid State hybrid 4 G Drive with 500 GB and 4 GB of memory NAND flash + 500 GB) GB
  Jim Kerr sent from my iPad

• Looking for an update of the bios for Acer aspire M1641 motherboard

  Looking for an update of the bios for Acer aspire M1641 motherboard

  All I could find was the one for the acer aspire M1640 which has a different card number, but is as close as I can get for it. That's the good? If this isn't the case, anyone would be able to point me in the right direction?

  Thank you.

  FTP://FTP.Acer-euro.com/desktop/aspire_m1641/BIOS/

• Missing power supply Aspire S3-391

  Hello

  I just got my S3 of Aspire new-391 (NC-S3-391-53314G12ADD).
  The Quick Guide indicates that I must first read the installation Poster.
  The power supply is missing from the box!

  Does anyone know where and how to find the power supply?
  I'd rather make a configuration before the first use of my laptop.

  The box also says to check the content after the seal is broken.

  I guess that the checklist is on the same installation plan...

  Thank you for your very useful comments!

  Best wishes from the Netherlands

  My only advice would be to contact your local support center to see if they have a Poster of installation available for the system.

• Alienware CPU liquid cooling and fans and power supply on the new motherboard

  Hello. Would be my Alienware Aurora R4 CPU liquid cooling and fans, and the power supply inside of light on a new motherboard which is in a different situation? Because my R4 Alienware Aurora case is too big and occupy us too much space, and my office is weak. Thank you.

  You can get a better response if you re - post it in the forum of the Club of Alienware .

• Power supply with Acer Aspire X 1200 problem

  Hello world. I need help. I'm new to Acer Community Forum, but have a problem with my off-warranty X 1200 desktop model. It turns off and I am unable to start it. I changed outlets and also changed the power supply cord. Still nothing. The only thing I see on the Acer Support site is "check the tension on the system setting", but no explanation on how to do this. The system has a fuse that could be replaced? Someone had a similar problem? Any ideas as to what I can do to feed her top? Thank you.

  Ethel

  Thanks for your comments. It turns out that I was able to 'test' the PSU using the method "trombone" (20-24 pin, placing the trombone open between the Green and of the sons of black earth) and confirmed that the most likely guilty was in fact the power supply. I bought a new one on eBay (about $53) and in 2 days it had in my hands. I followed an other UTube on how to replace the power SUPPLY and even if I there was, cleaned dust on the fan, etc., put everything together, and SUCCESS! Now everything works fine. I agree that it would have been probably not cost-effective to have Geek Squad troubleshoot and replace the power supply, but to do it myself, I would say that it was well worth! Considering that it was the first time that I NEVER opened a tour, I feel pretty good on the result. Thanks again for your response! Ethel

• My new power supply work with my motherboard?

  Hello

  I reasontly bourght a few upgrades for my PC.

  I bourght an i7 870 and an AMD 5670 + a new power supply

  So my question, what ive in doubt, my new PSU(CX-500) work with my motherboad (MS-7613(Lona-GL8E)?

  Thanks in advance

  René Tyrsted

  Thank you.

  Yes. It will work.

  However you will probably find a little tight because of remaining unused cable bundles. My preference for the PC ATX Mid-size boxes are of the modular power supply. With a modular power supply connect only s connector as much as you want.

  Do the upgrades one at a time.  Start with the power SUPPLY and any other origin. Check that it works and then close.  Then go to the graphics card.

  Happy update.

  Best regards
  ERICO

• Fan power supply ATX Vostro 420 * or shot? !

  I'm looking to replace the power supply in my Vostro 420 with a standard ATX power supply.

  New ATX power supplies have a large 120mm positioned on top of the PSU fan. Does this or *?

  It is important because the Vostro is not really compatible with ATX design - the case has a solid above the PSU Panel so that the power supply unit must be mounted with the fan down on the mother/CPU card. A fan which breath would simply blow the hot air on the CPU.

  Conversely, a fan who * would * hot air from the motherboard in the power supply and on the side.

  None of these options is great.

  I am puzzled how to mount a new ATX PSU and if the fan * or breath.

  What is the best way to mount a new ATX PSU in a case of Vostro 420?

  The shift of the 4 screws on the back, you CANNOT point the fan at the top.  He is pointing down and draws air upward.  Graphics also of VENTILATION at the back. AFAIKT ZERO types bring in air from the rear.  Even the location VENTILATION fans in the back.

  I hear from the front the front of the case.  The power supply is located on top of the CPU fan and hoovers to the top of the hot air and sends it to the back of the case.   This is the norm for almost all Dell I can think.  There are fans of aspiration to the front of the case and video cards and blow hot air from the PSU to the rear.

  

  

• G4 MDD power supply Issue

  My MDD was recently stop only two or three minutes after a cold start. The power led lights up, the gray screen with the Apple logo appears with the spinning wheel, but then the machine suddenly loses power as if the power cord was disconnected. These are the things I've already tried:

  1. Removed the PRAM Battery
  2. Disconnected all devices except the keyboard and the monitor
  3. Tried a different power cord

  Start in safe mode did not help. The fans are all running, the red LED lights on the logic board and disk drives seem to work. This could be a power supply issue or a problem with the motherboard and is it possible that I can definitely identify the problem without being able to start the G4? The startup time has been considering more when everything worked last week, would that be a clue? I've owned this machine for more than twelve years and it put to the test so I wonder if it's time to retire him.

  Thanks in advance for any help you can offer!

  Hi, looks a lot like a problem of heat from the CPU, thermal paste is usually good for 5 years or more.

  It runs longer open door?

• Compaq Mini 110: Polarity of power supply jack

  Hello

  I have a HP/Compaq Mini 110 that was given to me because both the battery and the AC adapter was lost. I have a power supply of the correct voltage (19 VDC) and can get an outlet of the right size. I need to know what the polarity of the plug must be, for example, is the center of the end positive or negative? I also need to know if the computer will be also powered if one battery (even dead) is not installed. If it will power-up with the polarity a/c adapter, I'm going to buy a battery, otherwise I don't lose money. Shame on HP/Compaq to not show a pictorial of polarity on the camera body. If I can get going, have enough moxie upgrade to Windows 10? Thank you.

  Here is the Service Manual:

  Manual

  See p. 54 on the hard drive. She straight plug the motherboard, but it shows a cart or make sledding which does not move there and the SSD is welded to a SATA connector. For some time I took one of these apart.

  He's a regular SATA and the size limit, it's what is on the market, not the hardware, so you could theoretically install a 2 TB or a 2.5 inch SATA SSD. You could probably get one inch 80 gig SATA SSD 2.5 for a pittance and it would run as well as he is capable of running.

  The memory you have is DDR2-800, but the system he clocks up to speed DDR2-533.

  The power Jack is soldered to the motherboard and there is no way I know to stretch upward. A lot of youtube videos on the welding on a new jack and you can find the plug for a few dollars. It is not a work that I do, but I saw several times and I think you can probably manage it if you have the soldering equipment.

  If this has answered your questions please make it easier for others to find by marking "accept as a Solution.

• Z640: Upgraded the video card to 1070 GTX. I have to upgrade power supply?

  My Z640 has a supply of poer 925w but the power plug 6 pins only I think remaining is not enough to feed my 1070 GTX video card in use heavt. It requires care supply 2 x 8 pins and adapter I installed is not always able to provide enough power. HP chat support wasn't any help. Do I need to install a new power supply that provides power sheets 8 pin pci-e?

  @MacTheSteve, welcome to the forum.

  This is Service and Maintenance Guide for the workstation.

  I contacted StarTech to see if they would have an adapter 'Y' which had two 8-pin power connectors.  However, those that they should be the following on your motherboard or the power supply:

  StarTech Brandon: basically, there are 4 SATA power or LP4 molex.

  I believe that your diet is enough power, but simply do not have the required connectors.  At least, I don't the seen on the diagram of the motherboard.  It seems that you need to upgrade the PSU.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite U500 - 11 C - power supply unit not detected

  Hello

  on my Satellite U500 - 11 C, the power supply is no longer recognizes (the rest green LED turns off when I plug)

  I tested my diet and it's OK

  I disassemble my laptop to check the connector and the power is OK of the external connector to the connector on the motherboard.

  with my battery, the computer works normally (but the battery is not more)

  You have an idea on how to solve this problem?
  What can I check?

  > Do you have an idea on how to fix this?
  If the battery and the mains adapter are ok, while a single problem can cause this: faulty motherboard.
  Maybe there is something wrong with the electronic power supply on the motherboard.

  Of course this is only my personal opinion, but I put t see any other reason for that

• Corsair POWER supply update does not post, powers of the powers of 5 seconds down and loops...

  Have the HP Pavilion Elite m9650f with motherboard replaced in April 2012 class good to go.

  Replaced the stock GPU Nvidia GeForce 9800 GT with a Zotac GTX 560 Ti GPU and

  the stock HP 460 Watt power supply with a W0388RU Thermaltake TR2 600 Watt PSU in may 2012.

  All goes well until October 2012.

  PC randomly starts shutting itself off the coast and not feed until I have unplug the power cord and wait 5-10 minutes.

  Finally, he stopped turning on all together.  Reinstall all power PSU connectors, etc.  same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstall the stock HP 460 Watt PSU, now everything works fine.

  Thought it was a premature failure of Thermaltake PSU.

  Bought and installed a Corsair CMPSU - 850TXV2 850 Watt power supply for a few days but still not good to go.

  Lights, fans spin, but no MESSAGE, no video, tracks for all

  5 seconds, stops, turns on itself over and over again.

  Reinstall all power PSU connectors, etc. same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstalled the HP PSU stock, now everything works perfectly again.  ?

  Spends hours reading the forums...

  Some say that the RAM may not report correct voltage for power supply.

  If so, what can I change RAM voltage in the BIOS?

  Others say reset CMOS I did, same result.

  And someone on this forum HP thought that perhaps the Pegatron IPMTB-TK

  Card mother Truckee can only accommodate up to 750 Watts POWER supply.

  Any ideas?

  Can I get away with just using my HP 460 Watt power supply after all stock?

  Thank you.

  I have an additive to add to this topic.

  To refresh, my questions focus on a possible shift of the power supply and card mother specs:

  What is an ATX 12 v 2.0 and above technical problem or a power CAP problem?

  I posted my questions on the Forum of power SUPPLY Corsair PSU

  at the same time and I paste it here now, a response

  to GUY of RAM.

  "Hey RAM GUY."
  
  Sorry I couldn't answer until now.
  
  Please specify the difference between the ATX 2.0 specification and 2.01
  
  Spec that the negative - 5 v Rail is not present in the 2.01 spec and
  
  beyond.  As I mentioned previously, the Thermaltake PSU that has been
  
  running in my 2009, HP i7 tour for 7 last month said 12 volt ATX 2.2
  
  on the case and even if the power supply HP OEM said 12 volt ATX
  
  2.0 in the technical literature, that I found on Google, the real PSU I have does not work
  
  have any note on the case ATX specification.  So I think it's safe to say, my
  
  motherboard does not have the negative Rail v-5 at which he played
  
  nicely with 12 volt ATX 2.2 spec, until recently.
  
  Although theoretically it is supposed to be no limit on the amount of
  
  Absorbed power, you can use to power your motherboard, the motherboard because
  
  is supposed to use only what suits him and cap the rest, it seems that the OEM
  
  can dial up limitations of power if they deem necessary.
  
  Could be as simple HP, without wanting to compete with some of his HPs
  
  Professional workstations, caps so power on some Pavilion Elite
  
  Series models to prevent them from becoming a much cheaper
  
  solution.
  
  In any case, I think that all the available information, digested, he does not speak
  
  Specification of the ATX, but rather my motherboard HP has a limit of 650 Watts of power
  
  If I think that I read that someone else got the same motherboard goes with
  
  750 watts, but I do not remember where to find this announcement. »
  
  I'm back and Yes!
  
  Thanks again Lasvegaswireman!

• HP Compaq 8000 Elite power supply upgarde

  I have a HP Compaq 8000 Elite 2010 and you must update the power to launch my new Radeon HD 6850 graphics card. After much research I found that this particular computer motherboard does not have a normal diet of 20 or 24 pins but use instead of 2 separate connections from 4 pins for power supply PWR and PWRCPU and a third cable that seems to me to be an ancient and obsolete 6-pin auxiliary power (http://www.playtool.com/pages/psuconnectors/connectors.html#aux) for the PWRCMD supply Cable. I also found that all power is carried out through the motherboard for each piece of hardware in the computer and therefor, most likely has a limit for the maximum possible power supply. Y at - it sort of a power supply that will fit both into the slot in the power supply (which is not the standard size of power supply, but rather measures approximately 6 "x 5.75" x 3.75") and will also be able to connect to and sufficient power to the motherboard? Or am I stuck with an ugly 320W? Help, please!

  Service card: (http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01944841/c01944841.pdf)

  Similar cases: (http://h30434.www3.hp.com/t5/Desktop-Hardware/replacing-PSU-on-HP-COMPAQ-8000-ELITE-Convertible-Mini... )

  Maverickv2,

  You will not be able to upgrade this power supply, model # 508154-001. It is not possible with these connectors. The most absurd part is that the material (disks) are actually powered off the coast of the motherboard. (As you said).