Aspire connected bluetooth V3-731, signal drop internet wifi

Similar Questions

• The misfortunes of WRT610N - signal high but dropping internet

  So I got a WRT610N since June 2011 - works perfectly without having to think about, I just hooked it up and it has been on the default settings and never gave us any problems.

  About a week ago the power went out - and it caused the router to reset to the factory settings. I've put up with our network name and the security and don't think much. After that, we started to notice questions on our phones and laptop in the kitchen.

  I work in the same room as the router, wifi and did not have the signal drop once since then--my work laptop is about 3-4 feet from the router. Another PC through the router works fine

  Continuously on the strip of the 5 GHz for tv, a room, works perfectly, like netflix, youtube, etc on the TV.

  Once you get to the kitchen, on the laptop there (which has been there for months without problem), wifi is completely laminated. This is maybe the router through only 1 wall of 40 feet. The signal of 3 to 4 bars and windows reports still says 'internet access' for the State of the connection, but the connection drops on a regular basis, and you must manually disconnect and reconnect to the wifi to restore internet access. It of the same story with the phones if you are more that about 20 feet from the router - they have a strong signal, but will be lowered on a regular basis, requiring you to disconnect and reconnect. The 2.4 GHz and 5 GHz bands seem to be behaving in the same way.

  Normally, I would say that the power outage fried the right thing and get a new one - but he is works perfectly at short range and still give a strong signal to longer-range - juggling just not the internet.

  I factory reset it several times since it began. I tried different settings on both bands, different security, no security, etc. But nothing seems to help, that's why I post here - help!

  Thank you for reading.

  Try to reset to the factory settings and then update the firmware. After the update of the firmware, a 30-30-30 reset hard and then reconfigure the linksys from scratch.

  InSSIDer allows to find the best channel. And try to use 20 MHz only for the width of the channel.

  If by chance your modem is a router too (for example. "You have DSL), try to change the local IP address of the linksys 192.168.2.1.

• HP6600 drops internet connection, can't print wireless

  My 6600 seems to drop our wifi signal every few minutes.  I can not connect to the printer from any device without wire (iMac, HP desktop or laptop).  I tried the unplug reset twice and entered manually our wifi information.  Any advice on how to improve our connection?

  Thank you dzanotti. Assuming you have a "HP Officejet 6600 e-all-in-one printer - H711a/H711g' is a specific document to: printer does not maintain the wireless connection.
  
  Follow the path of troubleshooting for your operating system and let me know if that helps.

• EX7300 drops internet connectivity

  Hello

  so I bought myself an EX7300. Manual configuration went all well.

  My problem is, that, although Windows indicates that it has access to the internet and the wireless signal is at the highest level, my internet connection is lost every few minutes. I have to toggle the WIFI connection to regain access to the internet, but once again, it's just for a short period.

  When you perform a repair of Windows, the message is: Windows cannot communicate with the device or resource (primary DNS server) [main DNS server is 192.168.0.1]

  The Extender has a static IP address which is 192.168.0.50, but gives the router a DHCP IP which is 192.168.0.106.

  Firmware is the newest: 1.0.0.44

  It's really annoying and restores the Extender completely useless.

  Any suggestions?

  Thank you

  NX

  I think I solved the problem by giving the router a channel fixed wLAN (48) and the Repeater another (40). Have not had this problem since.

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect any device bluetooth on my windows vista, go to bluetooth devices but the drop down menu will not drop

  Original title: mouse bluetooyh
  Unable to connect any bluetooth devices on my computer windows vista, go to bluetooth devices but the drop down menu will not drop iam so unable to connect any bluetooth. any suggestions

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  f the foregoing does not fix it contact the manufacturer of the device

• Wireless network connection is connected with the strong signal, but stops working at random times

  Original title: internet says is connected with the strong signal, but stops working at random times?

  Hello
  For the last few weeks, I had problems with my internet connection. Wireless connections say I am connected and have the strength of the excellent signal. I know that this is not an ISP problem because my other computer works fine. I will be reviewed fine and then all of a sudden, the site doesn't load any more, although I'm always connected to the internet. This happens on Firefox and Internet Explorer, this isn't a browser issue.

  I read other offered on the internet and tried all, but nothing has changed. I have checked proxies, disabled antivirus and installed new, checked firewall, ran a check for malware, etc..

  Any help will be much appreciated because it becomes very frustrating to have to keep reconnected my internet when he says he's working.

  Hello

  I suggest you follow the links below and check them with the question:

  Method 1:

  Step 1:

  Start your computer in safe mode with network and check the number: http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Step 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters, and then click on uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  For reference:

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  I hope this helps.

• Any old Android can connect Bluetooth to my imac, why my iPhone 6 cannot? !!

  I am SUPER frustrated and annoyed by this question. My iPhone 6 unable to connect bluetooth to anything. Why Apple did not find that. Any old cheap android phone can connect to what whether bluetooth but my dear super high-tech iPhone 6 can't, why? Since 2013 and perhaps earlier, I had this problem with iPhones, something so simple, so helpful, and Apple may not understand it. Come on!! I am really annoyed on this issue! PLEASE DO SOMETHING QUICK! SOLVE THIS PROBLEM! WE NEED BLUETOOTH AT WORK! Apple has simplified many things in life, but it has bluetooth connectivity completely SCREWED UP.

  And the iPhone is not intended to be connected to a computer via Bluetooth.

• Why the memo does not play on a connected Bluetooth device device?

  Why can't I read my voice memos on a connected bluetooth device?

  What type of Bluetooth device? What happens when you try to read this memo?

• On the screen that it says "the proxy server refuses connections" Firefox is configured to use a proxy server refusing connections. The result is no internet.

  the proxy server refuses connections"Firefox is configured to use a proxy server refusing connections. The result is no internet

  You are welcome

• Unable to connect bluetooth microsoft (Yosemite 10.10.5) mouse

  I use Yosemite 10.10.5 on an iMac "mid-2007".  I recently bought a Microsoft Bluetooth Mouse.  When I try to connect, Bluetooth does not recognize the mouse trying to connect with him.  If there is anything I can do otherwise than throw the mouse, I would welcome any suggestions!

  Hello

  It happens the same thing for me. I'm on Mac OSX 10.11.6 El Capitan on a MacBook Pro (13 inch, late 2011).

  I have a Microsoft Bluetooth mouse 3600 (https://www.microsoft.com/accessories/en-us/products/mice/bluetooth-mobile-mouse-3600/pn7-00001) which, under the plug is compatible with MacOS 10.10 (it was the last version for the moment).

  The problem is that my mac does not detect the mouse, so that I can detect it other windows.

  Is it possible that, regardless of the OS x version, the version of bluetooth mouse (4.0) does not work with MacBook of 2011? I checked my version of the laptop was the last of them using bluetooth 2.1.

  Thank you

• Satellite A305-S6825: unable to connect Bluetooth to a wireless mouse

  Hello!

  I'm from Russia and I recently bought a portable Satellite A305-S6825 my friend in the United States (and is not on sale in Russia yet).
  Everything is OK except one thing - I can not connect Bluetooth to a mouse wireless (of course active and put just nearby).
  I went on Bluetooth in "Bluetooth settings" but whenever I press the button "Add a new connection..." I see the following statement appears on
  the display "BLUETOOTH IS NOT READY." But how to make it "ready"?

  This problem really intrigues me.

  Many thanks in advance for me have helped!
  Looking forward to get a quick answer!

  Sergey
  Moscow

  Maybe I'm a little confused, but use BT, to BT mouse too. I'm afraid that your laptop has no BT.

  In addition, Googling around, I found this page. Is this the right specification for Satellite A305-S6825?

• iPhone 5 s signal drops randomly

  I have an iphone 5 and recently I had a few problems of signal, the first thing is that if I do not send an iMessage for 5-10 minutes and then I'll send a message, it takes a lot of time for the message to be sent and then I get a bunch of iMessages as I get earlier, then I use FaceTime a lot and recently there has been very little reliable disconnection after 10-20 minutes , I also tried using the oovoo app an appellant video application and the same thing happned it disconnected after 10-20 minutes (note that after it disconnects I recall and it disconnects again, I can do that for hours) the last thing is my signal drop subsistence and not comin back, I'll be in my house and I notice my signal dropped and he won't come back until I turn the phone and the turn it back on again. I'm not sure if the problem is with my service provider or my phone, any help would be appreciated.

  Hey Kieran.

  I just want to point out a few grammatical errors, you did.

  (1) capital 'i' every time that it is the only

  (2) fix your run on sentences

  (3) "ooVoo. "a Soft video call, and.

  (4) entry

  (5) AN iMessage. not an iMessage

  Good luck to find ways to solve your problem, although I'm not sure why anyone would want to facetime someone who is illiterate.

  Much love❤️

• My connection between my PC and the Internet.

  MY CONNECTION BETWEEN MY PC AND THE INTERNET.

  I sent a message yesterday - don't know if I got a response.

  My question is that something is wrong with my internet connection.  He died in line every 4-10 minutes of use.  I bought a new computer because my technician told me that I had a bad virus on my PC.  But now I have a new PC but my problem remains.

  Can what tests I do to see if the problem is with my wireless router, the Arris modem provided by Comcast, or something else.

  Please help me.

  Dave Fox

  my main email is , but I think I have the address of e-mail as .  so when you meet me you you the man or the other.

  But please reply to this email.

  You have the same problem if you connect directly to your router?

• After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

  Hello..

  After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

  Hello

  1 windows operating system is installed on the computer?

  2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

  3. What is the number of brand and model of the computer?

  Method 1:

  If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  The link applies to the Windows Vista and Windows 7 operating system.

  Method 2:

  Check the link and try using the network troubleshooter to fix the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 3:

  See the link and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.