My connection between my PC and the Internet.

Similar Questions

• I have a Palm Z22. It won't hotsync. It tries to connect, but then "problem, the connection between your device and the desktop could not be established. Please check your configuration and try again. »

  null

  Chillie wrote:
  Sorry I put my question in the wrong place.  I use Windows XP.  My Palm is a Z22.  I restarted my computer, if that's what you mean by a soft reset.  I have no answers-don't know my hot Sync Manager.

  A soft reset is performed on your computer Z22.  Look for the small "Reset" button on the back of the unit and press it with the tip of your pen or a paperclip.

  Reset draw your Palm.  Try to HotSync again.

  HotSync Manager is what your computer to connect to the computer Z22.  Do you see the HotSync icon in the lower tool bar?  If this isn't the case, you can not connect.  Go here:

  Start Manager button / all programs/Palm/HotSync.  This selection must load the HotSync Manager.

  I would help you with HotSync Manager, but you neglected to answer my question on "What version of Palm Desktop?"

  WyreNut

• When you connect to Windows 7, get the error "the trust relationship between this workstation and the primary domain failed."

  You open a session in Windows 7, you get an error stating "the trust relationship between this workstation and the primary domain failed."
  Can someone help me please...

  AC of Phil wrote:
  > As you connect to Windows 7 you get an error saying "the trust relationship.
  ' > between this workstation and the primary domain failed.
  > Can someone help me please...

  Contact your domain administrator for the domain of the computer account
  recreated or reactivated, as appropriate.

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot

• Problem of password of account, without that we can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid.

  Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him.  Thank you

  If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:

  • A domain administrator account.
  • A local administrator account.

  When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.

• I can't connect my HP 7520 to the internet.

  Hello

  I can't connect my HP 7520 to the internet. The network works for all customers, but not for my HP 7520. He wants me to enter settings Proy address and port. What is computer /?

  I have an AUSUS router.

  Best regards / Robert

  Given that the printer can connect to the network and will allow you to print, I'm not sure that there is a network problem. Connection to another network and checking the EWS and applications Internet would be a great step in troubleshooting, and I'd be curious results if you try.

  The only other option I can suggest would be to contact the HP Cloud support team, if you have not yet. If you live in the USA/Canada, 1-855-785-2777. If you live outside the USA/Canada, click HERE to find the number of Technical Support for your country/region.

• Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I keep getting "the trust relationship between this workstation and the primary domain failed" error windows 2008R2

  Hi all

  I appreciate your help. And I hope that this issue has been addressed previously, although I couldn't find any solution there.

  I manage a domain windows 2008 with 3 domain controllers. Recently my workstations continue to fall out of the field. I get "the trust relationship between this workstation and the primary domain failed" to many workstations.

  I know how to fix properly, use netdom.exe. But the mistakes keep coming back. I don't know where to look for the source of this error. A possible problem might be the time in any field is out of sync. But all my workstations synchronize with the domain controller with the primary domain controller role and seems to work correctly.

  Are there other sources, that I need to check? This is getting frustrating.

  Thank you much for the help.

  Sincerely,

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• My XP VM is enabled but the backround becomes black and and the internet comes up saying that I have to upgrade to windows 7. What to do.

  Hi all

  I have a virtual xp machine but the backround becomes black and and the internet comes up saying that I have to upgrade to windows 7. What to do.

  It is activated

  What should do

  Danbot 1

  Hi Danbot 1.

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope the helps of information.

• integrates the desktop of Windows XP and the internet

  which integrates the desktop of windows xp and the internet?

  You a modem and your ISP

• The trust relationship between this workstation and the primary domain failed.

  The trust relationship between this workstation and the primary domain failed.  This only happens on the Windows 7 desktop.  It is sporadic.   Add the computer account to the domain is not a viable solution.  It happens far too often.

  There is nothing coherent we found on systems that are removed from the field.  Some time its workstations users, sometimes its laptops to students and sometimes he posts of laboratory work.  Different types of systems use different images.  All images are syspreped before creating the image.

  Hi Geoffrey,.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question on the Technet Windows 7 Security Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IPSec VPN connectivity between multiple subnet for the unique subnet

  Hello

  I have headquarters where several VLANs are running and branch has a subnet.following is subnet details

  Head office subnets

  192.168.0.0

  192.168.101.0

  192.168.50.0

  192.168.10.0

  192.168.20.0

  192.168.30.0 all are 24

  branch

  192.168.1.0/24

  Headquarters I have PIX and branch, I have cisco router 2600. I want my subnet all headquarters access to my office of general management of the LAN

  I want to create an ipsec vpn, my question is that I can combine several subnets of headquarters in a subnet because I want ot get rid of several ACL entries

  Hello

  Well, if we look at the site of the Directorate. He has only the single network and even with the destination network that overlap, it shouldn't be a problem. If a host on the network of agencies needs to connect to another host to local subnets will connect directly to him and the traffic flow through the router.

  I don't know if there should be no problem on the PIX side or the other.

  But to be honest, it's a very small amount of networks, and I don't see a particular reason, that I would not configure each network specifically, even if it should procude a few lines more to the ACL. Personally, I prefer to be as specific as possible in configurations to avoid any problems.

  -Jouni

• Why lightroom 5.7.1 patch for the dvd version does not support the Elimination of fog and the internet the trial version only?

  Why lightroom 5.7.1 patch for the dvd version does not support the Elimination of fog and the internet the trial version only?

  I have the dvd of my camera samsung nx3000 and got version and upgrade to 5.7.1 (high-end) and it is not the removal of the trial version of lightroom download creative cloud fog. How to get this tool software mi?

  Hi nicoa,.

  Dehaze feature has been introduced in the version of Lightroom CC2015.1 and is not a part of 5.7.1 version which is the previous version.

  If you need the dehaze feature, you must subscribe to plan creative cloud so that you use the latest version of Lightroom.

  Kind regards

  Claes

• Can I save between a test and the stand alone version?

  Can I save between a test and the stand alone version?

  You're right, the CC version is activated with your Adobe ID and password once you have signed up for the plan of creative cloud. You can uninstall this CC version and install the standalone version. It of the same program and opens the same catalog. You don't need to save anything. Simply move to the standalone version and start Lightroom. Everything will work out just the same6.

• The connection between your access point, router or cable modem and the Internet is broken...

  -router

  connection internet dropmy every 20 minutes and again after one minute everything is as before... pls help has me... mb my router is a waste

  Wire? Wireless? Status of other computers (if any)? Router? Network devices? Type of Internet connection?

  Have you other computers can connect to the Internet using the same network hardware?

  You have any kind of 3rd party Network Manager installed, like Hello, Netmagic and the likes?

  Do you have the "Fancy" 3rd part security suits, or as the hybrid of nVidia Firewall Firewall.

  You are using more than one firewall (including native Windows), AV or other security applications active?

  If you use any 3rd part above, try to configure them to work corretly on your network, or get rid of them and see if it helps (RID, means getting rid, not just disable ).

  ------------------

  Assuming that you are connected with the wireless to the router.

  First scan the computer against the viruses and Malwares.

  When you are sure that it is clean.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• our airport time capsule connects to computers and the internet, but does not record on the usefulness of the airport as being there - is it dying or is their a reset?

  Our computers connect via wifi to a capsule of time to the airport and to the internet, but can't find the time capsule, nor can its hard drive. Y at - it a reset, we can try or he dies. It's only a couple of months.

  Turn about your Airport Extreme for 15 seconds and then power back on. As soon as you see the green light, you should be able to see him for a minute or two in the Airport utility. In the affirmative, and see if you have Back to My Mac active. If so, disable it by removing all the e-mail addresses of the back section of my Mac. Then update your Airport Extreme. Work quickly.

  Many have started having this problem within the last week, probably because Apple changed something in its servers CCMM. A real difficulty would come from Apple, but it should work if you currently have active CCMM.