The misfortunes of WRT610N - signal high but dropping internet

Similar Questions

• WRT54G good signal wireless but no internet connectivity.

  I have a WRT54G that has worked well for about a year. Last Sunday, I installed a couple of small updates from Microsoft on my main computer (cable via an ethernet cable from the router). At the same time, I installed service pack 3 on my girls (wireless) counter top.

  Since that time, on my three computers wireless I shows the strength of very good signal from the router but no internet connectivity. Internet works fine on the computer by cable.

  I have reset the router, no luck. Updated the firmware, no luck. Released and renewed until the cows came home and still no luck.

  I uninstalled the router of my main computer and reinstalled. During the installation it tells me that the router cannot find the internet even if the computer that works is connected through the router.

  I tried a different router (even part old version) which was a router to work when uninstalled about six months ago. I went through the installation process and it is the same, the router cannot find the internet.

  Is it possible to have two bad routers that the internet can pass through but the router cannot detect?

  At first I thought changing the setting of the Microsoft updates, but I restored my computer to a date before the updates and still have the same problem.

  Any help that anyone can give is most appreciated.

  Well there are some knows the problem with Service Pack 3 from Microsoft with wireless connectivity. You can uninstall SP3 from your computer and it will not solve the problem.

• Wireless signal recognized but not internet connectivity: laptop HP 2000, model QE334UA, Windows 7

  I have a 2000 Notebook PC HP, Model # QE334UA, running Windows 7.  The wireless signal is showing all the bars at the bottom right, but I am unable connect wireless to what anyone (for example, any web browser, Outlook, Dropbox).  When you connect via a LAN, however, I have no problem.  Here are some details on what I tried:

  1.) this same problem occurs on all the networks I tried, even if the other computers are on these networks, is not a problem of router/modem.  Yet, I restarted those and nothing helped.

  Rebooted 2.) the computer.

  3.) done a system restore.

  4.) checked IPV4 settings make sure IP & DNS server addresses are configured to automatically get.

  5.) turned on and off the wireless on the keyboard button.

  6.) as gone with the Device Manager and press update driver software for all network adapters.

  7.) deactivated and reactivated all NICs.

  I have read many other forums - than where I got these ideas- and it seems a common problem, but I could not find an answer that works.  I'm not too technically savvy, so maybe I'm missing something, but any help would be LARGELY APPRECIATED, especially because my warranty just expired.

  Thank you

  Zack

  I have it!  It turns out that my SonicWall VPN has been the origin of the problem.  Thank you!

• using Firefox 11.0 when trying to 'bookmark this page' in the bookmarks drop-down menu at the top of the browser bookmark pop-up window, but it disappears when I move my mouse to the bookmark window

  using Firefox 11.0 on Windows 7 prof 64 bit, when trying to 'bookmark this page' in the bookmarks drop-down menu at the top of the browser bookmark pop-up window. When I move my mouse over the bookmark pop-up window to change the directory where you will store the bookmark, it disappears before I can do something? If I move my mouse near the yellow star on the right side of the window to the url, the menu bookmark can appear again, but it disappears when I move my mouse over it?

  Hello!

  We have seen similar problems in the past. Read this 2-wire and let me know if they help you:

  https://support.Mozilla.org/en-us/questions/899098
  https://support.Mozilla.org/en-us/questions/850203

  Good luck
  Ibai

• Found 0 results for my browser missing important elements, the menu..., whole tool bar drop down to print, copy, work offline, file, save, bookmarks, history. I just installed latest foxfire on windows xp. Found a few instructions, but they called in the

  Found 0 results for my browser missing important elements, the menu..., whole tool bar drop down to print, copy, work offline, file, save, bookmarks, history. I just installed latest foxfire on windows xp. Found a few instructions, but they called the keys of my computer does not have (key under OSX there no file, edit, history, help, tools, navigation, all the things that your directions say to use. Also, I'm still hanging and the message a scrip is running. I don't know what are the thises scripts but I of course don't need them.

  This has happened

  Each time Firefox opened

  == I just noticed it. It probably happened when I upgraded foxfire.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (Linux and OSX see: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal.

  original title: pictures playing on tv

  I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal. I know that I have selected the right input of the TV. Is there something that I need to set up the laptop to send the signal to the s-video connector?

  Perhaps the following links will propose a few ideas:

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set How to connect my computer to a TV
  http://hookpctotv.com/ PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• When I look at my pictures on library it loads and it is super grainy, as my iso was too high, but when I look on developing it seems. What is happening and how I keep good fixed when I get back to the library and export?

  When I look at my pictures on library it loads and it is super grainy, as my iso was too high, but when I look on developing it seems. What is happening and how I keep good fixed when I get back to the library and export?

  Please see: photos look grainy on library but not on developing

  soft blurry images / when you view in the library but strong in develop mode? Lightroom forums

  Kind regards

  Mohit

• Hi there, when I drop my photo in photoshop it disappears, it shows in the layers that it is there, but not in my screen

  Hi there, when I drop my photo in photoshop it disappears, it shows in the layers that it is there, but not in my screen?

  Hello

  May I know if you use mac or a window.

  If you are using windows, please check the color profile assigned to the monitor, it could be because of the corrupt color profile.

  • Right-click anywhere on the desktop, and then choose the screen resolution
  • In the resolution of the screen the dialog box click the parameters in advance
  • The graphics card settings box will be the opening upwards
  • Go in the color management tab and click on color management

  

  • Click Add at the bottom, if this button is not highlighted check the option 'use my settings for this device'

  

  • In the next screen, provide you a list of the color profile. Scroll down and choose "sRGB IEC61966 - 2.1"

  

  • Click ok in each window.

  Restart Photoshop, and then try again.

  Thank you

• I have cs4 master and I want to get the creative cloud which according to it, you can get lower prices if you have cs3 or higher, but he says that I can not why?

  I have cs4 master and I want to get the creative cloud which according to it, you can get lower prices if you have cs3 or higher, but he says that I can not why?

  Hi Quinn7,

  Was that you upgrading from an educational version? If so, that could be related. I would recommend reaching out to our support for assistance. I think that there is a link to the chat or by phone at the bottom of the page of the plans: plans pricing and membership creative cloud | Adobe Creative Cloud

  -Dave

• Problems with the power of the Xbox 360 WRT54G signal

  Here's what I have high down.

  ActionTek GT701 (Qwest 7.0Mbps)

  Linksys WRT54G

  Reference Dell 530 (wired)

  XBOX 360 Arcade (wired)

  XBOX 360 Elite (wired)

  Printer Dell Wireless (wireless)

  Dell Dimension 2350 (wireless)

  I started with an xbox connected to the linksys router and had the excellent signal (HD quality) for Netflix strength. I added the second xbox and was still five bars of signal strength. About three days ago for netflix on the xboxs signal strength is only cut up to two bars. The rest of the House working at full power, but I can't get Netflix on the xboxs back to what is a. I tried to reset the two routers, by disconnecting and then changing the port to the xboxs, upgrading the firmware for the router and finally tried just an xbox connected both. (not in that order)

  I contacted Netflix and thay make any change on the end there, no changes have been made by my ISP.

  Xbox live is running at full speed, I'm not able to get the strength of Netflix.

  Any help is greatly appreciated. We use no cable, and that's how my family watches TV

  Just a note speedtest .net - downstream - 6: 19 (average of 3 tests)

  Upstrem-. 69 (average of 3 tests)

  If the X - Box is connected by Ethernet, then, change the wireless channel wouldn't make any difference. I suggest to update the firmware on the router, reset the router and reconfigure go to zero and then check the signal strength.

• I can't sync my phone to my computer and get the message that my phone doesn't have the latest version of Itunes. I downloaded the latest version on my mac, but what I do on my phone. I'm used to be able to synchronize the two.

  I am more able to sync my I phone on my Mac and get the message that my phone cannot be used because it requires a newer version of iTunes. He tells me to go to www.itunes.com to download the latest version of iTunes... I downloaded the latest version on my mac, but what I do on my phone? I used to be able to sync the two and now I can't even download the photos from my phone on my mac...

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• Why the extreme to express signal is broken

  I have an Airport Extreme b, g, n, ac cable (ethernet) to my router Verizon Wireless. The router has been updated by Verizon end of last year and works very well. From there, I have an iMac with 802.11 b/g/n/ac cable into the extreme as well. I have a Windows pc in another room wired with ethernet to the extreme as well.

  At the back of my house, I have an Airport Express b/g/n I used to extend my Airport Extreme signal for the past 18 months without any problem. I had problems of signal with the Express and it seems to re-defining the Express worked, but the image of my signal has changed my Airport utility on my iMac. Previously, the signal was solid from the far down to the Express, and the image on my iPhone 6, at the launch of my Airport utility has been broken from the extreme to the Express.

  Now the images are reversed where my iPhone has the solid signal, and my iMac broke the line signal. Someone knows why? It works, but the lines threw me.

  A dotted line between the terminal of the AirPort Express and AirPort Extreme indicates that the Express connects to the extreme by using a wireless connection.

  What do you want?... or... the Express linking to the extreme by using a wired Ethernet cable connection?  If If this is the case, there should be a continuous line between the Express and Extreme.

  What device do you have used when you reset and reconfigured the Express... the iMac or the iPhone?

  Did you completely turn off the iPhone, has waited a minute or two and then he fed up and checked the AirPort utility again this way?

• I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2 but I can not Airpay icon on the menu bar of my mac to turn blue when I select the apple TV conn

  I have a Mac Book Air of 2015 running El Captain I see the airplay icon in my menu bar and I've upgraded to the latest version of the software on my AppleTV 2, but I can't get the Airpay icon on the menu bar of my mac to turn blue when I select the apple TV connected to a HD from LG smart TV. Help!

  Hi, Arghbee1.

  Please visit Apple support communities.

  I understand that you are unable to AirPlay from your Mac to your Apple TV.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you do not see the AirPlay icon , make sure that your Apple TV is awake and that it meets the system requirements.

  If you do not see your Apple TV in the AirPlay menu, make sure that your Mac and Apple TV comply with the system requirementsand your software from the Apple TV is updated. Also check your firewall settings:

  1. Choose the Apple menu > System Preferences, click Security & Privacy, and then click the Firewall tab.
  2. Click the lock icon and enter an administrator name and password.
  3. Click Firewall Options.
  4. Deselect the option "block all incoming connections".
  5. Select the option "automatically allow signed software to receive incoming connections.

  If your office does not look great on your HDTV, high-definition TV could apply image quality improvements that are not the best for the computer images. Check the manual of your HDTV for more information on how to adjust your HDTV settings for use with a computer. Your HD TV could offer a more appropriate display mode, such as the computer or game mode mode. Also try adjusting the HDTV settings like sharpness, retail building and noise reduction.

  If you mirror your screen and the image correspond to your HDTV screen, you can adjust the size of the Office for the best image. Click the AirPlay icon, and then select an option under "game size desk to." If you fit to desktop size to your Apple TV, the image fills the screen HDTV but will not look as good on your Mac screen. Learn more about overscan and underscan and what you can do about it.

  If AirPlay disconnects itself, your wireless network can be too busy or have too many wireless interference to maintain the connection of the antenna. Learn how to solve the problems of Wi-Fi connectivity. The manual of your router network may have additional suggestions for maintaining a strong and fast connection with your devices.

  Use AirPlay to view a video of your Mac on a HDTV

  See you soon

• Equium A100: Crisp & slows down sound while the use of CP's high

  When I play a cd/dvd, or extract the contents of cd for laptop, or whatever it is which includes the use of the D: drive, the sound is all distorted and crunchy and slows down. also, the CPU usage is very high, and it won't let me write anything on disks.

  This has happened a few months now, it was workin perfectly before hand and I've only had the phone since Christmas, so it is still under warranty. It's an equium A100 series.

  I've been looking around on the forums and found athread on a similar problem but on a laptop satellite, and which was resolved by a new drive being installed because the original was defective. the link to this thread is:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21308

  so is that what someone had the same problem? does anyone know if a new hard drive would solve the problem on my laptop? and if not does anyone have any suggestions?

  Thanks for any help, dave.

  Hello

  Equium A100 is very similar to the Satellite A100. So maybe it's really a problem even as described in the other thread.

  But listen David, before you send the laptop and want to replace the HDD try first to reinstall the OS from the recovery CD!

  Try everything first format the whole HARD drive, erase the partitions and reinstall the OS.

  If this does not help, it would be wise to check, if the same thing would happen with the new HARD drive!