Aspire E1-510-2669 Boot, reading, RAM and piracy? questions.

Similar Questions

• The upgrade of RAM and warranty questions

  Hi all

  So, I have a dv6-7031tx, which has 4 GB of Ram. Now I want to remove the 4 GB of Ram on my laptop and replace it with 2 sticks of Ram of 4 GB, will be canceled warranty if I do this? The RAM brand im going for is G.Skill, Patriot or Kingston.

  Edited: I talked to HP support last week and apprently they recommend not third party as G.Skill RAM, they recommend only Mircon. I know not even how good are the Micron reputation and they are not well known.

  Thank you.

  Hello:

  You will not void the warranty by installing the memory of any provider.

  The only way you will cancel the guarantee is if damage you the memory slot, plastic cover, physically or does not follow the procedures in the service manual to install memory (like removing the battery and the power of a/c before working inside your laptop.

  I used the Patriot, G.Skill, Kingston, Crucial, Mushkin in HP laptop computers and desktop PC with a lot of success.

  I can also tell you that HP uses no chips Micron exclusively in their PC.

  Question... Why do you want to delete a module of memory 4 GB perfect condition except if they put a PC3-1333 chip here and you want to install 2 PC3-12800 (1600 MHz) memory?

  Another question?  If this is the case, why go to halfway?

  I just max the thing out to its capacity of 16 GB and buy 2 x 8 GB PC3-1600 (PC3-12800), memory modules.

  The page of the form is incorrect about the maximum of 8 GB.

  Please consult the owner's manual at the link below, Chapter 1, page 4.

  http://h10032.www1.HP.com/CTG/manual/c03216834.PDF

  Paul

• Acer Aspire Aspire E1 - 510 ram ddr3l missing 2nd sodimm socket on motherboard

  I have Acer Aspire E1-510-35204G50Mnkk and 4 GB of RAM making, I would like to upgrade with an another 4 GB of memory, but physically there is no second plug for so dimm ddr3l memory of ram on the motherboard. There is place for it on the motherboard, but no plug to plug the ram.

  what I can and where to buy second taken, this metal thing on the motherboard and use also second ram memory?

  Thanks in advance

  The second slot was an option on some variants E1-510. If you simply want to renovate a second take is hard to say because there may be additional components necessary.

  However, the easiest solution would be to simply replace your current 4 GB of RAM with a suitable 8 GB of RAM (which is the maximum for the only hold on your machine). (One or two variants both have a max of 8 GB RAM.)

• I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  You can buy or download a copy retail Microsoft windows and install it on your computer.

  You can download and install the device driver windows for your computer to Acer support website.

• RAM and SSD for my new Acer Aspire R7 752-5893

  Suggestions for the type of RAM and SSD memory for my new Acer Aspire R7 752-5893? TX in advance.

  You will need RAM SO-DIMM 204 format pins for your laptop. DDR3-1600 (PC3-12800, also known as) should work a treat.

  Your SSD should have an MSATA interface, so depending on what is here right now, you can place in a Plextor M6M disc.

  There are a few live hidden on the chassis of R7 - you can take a look here and see how to open it, and then you will know what players and the RAM slots you have available.

• is it possble to upgrade of ram and storage for Aspire P3

  I have Aspire P3, I love him...

  Currently only is 2 GB of Ram and 60 GB of storage, possible to upgrade to 120 GB of storage? and 4 GB of ram?

  Thank you

  Aries is shipped, is not extensible.

  The SSD would require a complete disassembly of system upgrade and is not supported.

  We offer versions of the P3 Aspire with 4 GB of RAM and a 120 GB SSD.

• I've updated my Ram in my Acer Aspire 5532 3 GB to 4 GB and it shows that I use only 2 GB and I have an empty slot

  I've updated my Ram in my 5532 Acer Aspire from 3 GB to 4 GB and
  When I run a check on my computer using my Norton 360 it shows
  I have 2 GB and I have an empty slot for the ram, but I have a 2 GB
  in it. What can I do about it? How should I do?

  Make sure that the RAM module is installed correctly.

  If you are running Windows 7 32 bit, you can recognize 3.2 GB of RAM.

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• Font managers of the RAM and fonts

  Hi all

  I feel that the ability to enable and disable individual fonts using font (font book or third party) management software is designed to eliminate RAM memory (or at least somehow the unloading of the treatment of the Mac).

  I also believe I read that he mentioned somewhere that all fonts placed in the user/Library/Fonts location are always active in the RAM, and this is perhaps why it is important to not just throw hundreds of fonts in this folder.

  I wonder:

  -If above are true?

  -If you use third-party font management software to disable a font placed in the folder User/Library/Fonts eliminates actually he RAM memory (as is probably for policies outside the system of appointed police records)?

  -If none of this is true, then why even should we use font management software to disable or deactivate fonts - why not just let them all turned on if they are not in the RAM?

  I want to make sure that I fully understand. I hope that this will help me make more informed decisions about my workflow of font management.

  I'm under El Capitan 10.11.6, although I don't think that this specificity is relevant.

  Thanks for the informed answers!

  I don't think you are quite correct, I hope someone will correct me if I'm wrong but here is my assessment of the situation...

  All installed or active policies are not loaded in RAM at startup because it would be than a useless on memory limited to Macs. System fonts will be loaded into memory as they are usually required.

  I believe that certain police functions get cached, such as previews of the fonts that are used in some applications, these selection committees are often written cache files stored on the drive that I can tell.

  Installation and activation of the thousands of fonts may cause some problems as apps may need to generate previews of these fonts - for example MS Word has its own custom selector of fonts that use the real font for names selection. Some design apps can analyze or search fonts when opening certain documents with the related font styles. Other applications such as TextEdit, Mail system use based Gatherer so that they benefit the plan puts large fonts in cache.

  The reason of FontBook is to assist in the management of fonts. OS X uses the 'library' system to allow multiple levels of abstraction, by example/System/Library is for OS-level files (stuff own apples), / library of the third parties who rely on the scale of the support system, ~/Library for user specific files. There is even in charge of resources to be stored in/Network/Library for use with a server on a WAN.

  Manage all this complex without a central application. In my view, that order preference is the user on the highest levels, so your own user fonts folder is selected on the system if you named the same way fonts. Part of the idea is also that you can export fonts in your own home library without affecting the other users of the system.

  Third parties also have police managers this attempt to 'do the right thing' based on what documents and applications you use. These are for most major design offices that use custom fonts or is needed to deal with versions of specific fonts, variations and even if the fonts are licenses for specific customers etc.. Fonts dynamically loading & unloading can cause headaches depending on what software you use.

  I do not think that average users need to think about fonts on OS X (beyond adding their favorites occasionally), you may be overthinking it unless you're in lots of design work.

  If you are concerned about running out of RAM, you probably need to install more, get a better Mac or run applications less. Just keep in mind what OS X tent now to use all the RAM available most of the time if not what is the point of installing it?

• A1103 new Ram and HARD drive will not start

  Hello.

  I have a Mac mini A1103. When I got there the folder flashing with question mark. I got a macbook earlier where this problem was solved by installing a new hard drive. so I ordered a new 160 GB IDE 2.5 "5400 RPM and 1 GB Corsair Valueselect DDR1 333 MHz hoping that this will help me get the mini running and preforming a little better with 512 MB of Ram.

  When I boot the mini after swapping ram and hard drive I always see the same flashing folder. I can reset the NVRAM Boot, enter diskmode target? (I think) and the Boot Manager.

  When I enter the Boot Manager I can see the following screen

  

  a few times I get to this screen for Open Firmware screen where I can use certain commands such as vram-reset reset-all rebot and so, but sometimes I'm just stuck on this screen.

  Anyone have any suggestions on what is wrong and what I can try next? I do not have the boot original dvd but I have a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original) but I can't get botting from any of the devices.

  A Mac Mini A1103 has a G4 Power PC processor and cannot be greater than 10.5.8. Superior OSX versions require an Intel processor.

  In this statement "a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original)" I think you mean OSX, not of iOS. You must obtain a copy of the original installation disc which was 10.3 or 10.4 or disk to upgrade to 10.4 or 10.5 full retail. Coverall A1103 all three 2005 models of the Mac Mini G4.

  You cannot use a grey disc unless it was delivered with your specific Mac.  Native gray disc with Macs and can not e used on the other model of disc.

  You can probably call Apple and order a copy of the original disks

• What can I put the RAM and the hard drive of a Macbook Pro 13 "2014 in a Macbook Pro 13" 2016?

  The main logic of my Macbook Pro 13 "2014 card is broken, and it turns out that it will be much easier and just slightly more expensive, buying a new Macbook Pro that, in order to replace. I would like to set up my new Macbook Pro 13 "online in a way such that it is as cheap as possible, while always respecting the level of my former. So, if I could order one with the minimum of RAM and disk space hard and then put these pieces of my old in the new, this would be ideal. I don't know so much about it, and the question is: is it possible?

  my old Mackbook Pro 13 ":"

  -purchased new August 2014

  -3.0 GHz dual-core Intel Core i7, Turbo Boost up to 3.5

  -DDR3L 16 GB 1600 MHz SDRAM

  -Storage flash 512 GB PCIe

  -Intel Iris graphics card

  I'll get to buy e new generation Mackbook Pro 13 "with:"

  -2.9 GHz i5 or i7 3.1 (I've not yet decided)

  -RAM: Here I want to configure it with as little as possible, if I can just put the chips of the old in the new. Is this possible?

  -Hard drive: same thing: if possible, I want to get the cheapest option and simply put the old in the new. Possible?

  Thank you in advance to anyone who might take a few minutes to help out me! It would be much appreciated!

  •

  The RAM is not transferable, and the reader will be not as fast as the original of the newest computer; In addition, change it the warranty of the news of the computer.

  (143318)

• Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  To be honest, Windows 10 is compatible with your Mac, but Apple does not release from Windows 10 drivers for it. There are various guides on the Internet to install the drivers for Boot Camp Windows 10 even if your Mac is not supported, but follow them at your own risk (don't forget that you won't receive help to make).

  However, you are free to run Windows 10 on a virtual machine. To do this, you can use Parallels, VMware or VirtualBox, but remember that a virtual machine will give you less performance than Windows natively on your iMac. Read-> Windows in BootCamp or Virtual Machine?

• Pavilion 15-p045TX: HP Pavilion 15-p045TX RAM and SSD upgrade?

  Hello Sir/Madam,

  I want to upgrade RAM and HDD (SSD) in my computer laptop HP Pavilion 15-p045TX, please answer my money issues:

  I have a 64 Bit Windows 10 installed on my laptop.

  Associated with RAM-

  (1) I have 2 RAM slots, 1 is used with ADATA 8 GB of RAM, which is the maximum limit of RAM that I can use in my second slot (8/16)?

  (2) is it expandable to Rams 2 * 16 GB (32 GB total)?

  (3) can I use any brand DDR3 8 GB / 16 GB of RAM?

  (4) there must be 1600 MHz? Or 1333 Mhz will also work? What is the best?

  Associated with SSD-

  (1) is there a limit on the size of the SSD memory support? 1 taken to support?

  (2) can I use any brand SSD? Transcend SSD 370 s 250 GB and Samsung 850 EVO 250GB OK?

  Linux 64-Bit installation will make a difference on Performance or questions above?

  --

  Thank you

  Sandeep

  Here is the Service Manual:

  Manual

  See page 3 of the memory card. It is said 12 GB is the maximum, but we know from experience, you can install 2 x 8 GB in total 16 concerts. No 32 GB. It must be low voltage, and if you already have a single module of 8 GB you want to duplicate its specifications. If it has 8 black blocks on the side, you need to get a module like this.

  It is not easy to work on this system. You must remove the top cover to get to the hard drive Bay and remove the motherboard to add RAM. See p. 105 and 116.

  Module of memory of 8 GB 693374-005

  There's a 16 gig module listed, but it is for AMD laptops with a single location and will not work on your motherboard, even if you could find it.

  https://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_1?ie=UTF8 & qid = 1475841671 & SR = 8-1 & Keywords = 693374-005

  

  You can install a type SATA 2.5-inch 1 TB SSD. There is no definitive list brands supported. People sometimes have problems with some specific SSD as some determinative seem to cause problems, but the Evo to Samsung 850 is a good choice with a record few if any questions.

  The computer does not know if she is running only Windows or Linux and the RAM or the SSD works with Linux or Windows, or in dual boot. The Linux kernels current used in the current distributions like Ubuntu 16.04 SSD handle very well with a maximum return.

  Post back with more questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• New SSD + RAM and mbp worsened?

  Data sheet: 2010 13-inch, 2.4 GHz Intel Core 2 Duo MBP

  8 GB ram

  SSD 256 g

  System: el capitan

  Hey guys, quick question: thought I'd give my mbp a second life recently and traded the BLAH new ssd hard drive and is increased from 4 GB to 8 GB of ram.

  Kept reading other users as their like new mbp...

  On the contrary to me: it is slow, programs, videos offset, always have the beach ball. WiFi is always terrible, compared to when I had the mavericks. It is also very often about 80 degrees with the fan blowing...

  It almost feels like the new ram made 'worse', is it possible?

  If it of too 'old' to manage el capitan, should I just wipe and go back to the Mavericks (my original system)?

  Or try sth else?

  Any help would be appreciated, thanks!

  Please provide the brand (s) of RAM and SSD drive you have installed.

  Download and view a report of Etrecheck:

  https://www.etresoft.com/etrecheck

  Ciao.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.