Aspire E1-571 touchpad not working not

Similar Questions

• Aspire S5 - 391: Touchpad not in Device Manager, does not!

  I'm not sure what I've done - the touchpad was behaving VERY badly, I tried to download and reinstall the drivers (used Synaptics because I couldn't tell what was on my machine)... but now I have nothing:

  running Windows 7

  Under "Input" in the system information (not Device Manager) - "Keyboard" a USB Input Device (Logitech Download Assistant) [this is a Logitech M505 mouse USB Bluetooth - integrated USB Atheros has not worked in years] and Standard PS/2 keyboard. "Pointing device" has only the HID-compliant mouse (driver is mouhid.sys). Nothing for the PS/2 compatible mouse, or any what touchpad.

  With the system diagnostics, I get the following:

  Symptom:

• Aspire E1 - 571 does not start USB recovery

  Get the error message saying phone needs recovery. Went into BIOS and selected USB HDD to boot. But as soon as I insert the USB key, the machine goes in loop simply display the Acer logo, black screen. Reflected on the USB (purchased at dealer) and there are files it contains. I tried to start USB FDD and USB, CD ROM, but they do not work either. What Miss me? Help please.

  If you need to reinstall your operating system:

  If your laptop still has the Acer erecovery partition, you can simply start by pressing ALT + F10 and follow the on-screen instructions.

  If you don't have this partition and want to use your USB recovery to reinstall your operating system, you must completely wipe your HARD drive first and then boot from USB.

  You can boot from USB drive just by pressing F12 and selecting the USB flash drive as a boot device, rather than change the BIOS boot priority.

  If your question is different, please post more details.

• Aspire E1 - 571 does not start

  When I press the button power button blue led lights for the duration of pressure on it, but nothing is actually happening with the laptop itself, is not even a murmur of activity. If I leave it alone for a few minutes, that's going to start randomly at the start but will turn off almost immediately as soon as it reaches the Acer screen.

  This happened directly after that I restarted my computer due to a problem of mouse, the mouse could still move around the screen, but it would not interact with anything. In addition, the laptop had a very occasional intermittent fault in the last months where it cuts but was always very well after turn on instantly. Any help would be appreciated.

  You are still in warranty? Because if so, please contact Acer/company ordered you from and tell them your computer has two card mother/power issues. This situation is NOT your fault and warranty Acer, you should have conflict, however, is this different if not in the USA.

  If you ARE NOT in the warranty, then your best option is to buy a new one. You can take it to someone to fix it and see your options on how much it will cost to repair. You could do it yourself, but you should be pretty good in it so dare to try.

  (Any suggestion that you should not be at fault with me or ACER, but only the second paragraph fits into this category).

• Aspire V3 - 571 won't boot past POST with installed HARD drive

  I am a PC repair technician and work on computers for almost 20 years and this has me completely confused. My laptop Aspire V3-571-6643 was working fine until just recently. The show the Acer and the system will fit on screen, and then restarts immediately. He'll stay in this loop of reboot until stopped manually.

  I cleaned and reinstall the RAM module and also tried in both slots without change. I was able to access BIOS and determined the readers and all parameters are correct and even reset to the factory settings without change. I then removed the HARD drive used in a docking station to determine if the drive was salvagable. Everything reads well and passed short and long tests through SeaTools. With the disk installed HARD, the system attempts to start on CD/USB, but after his withdrawal the system boots on a CD very well. I then ran a full scan using Eurosoft Pc Check and all is well. I reinstalled the HARD drive and get immediately the loop of reboot again.

  At this point the motherboard and drive the two test very well independently but do not go to work together. My only guess is that the motherboard is no longer providing enough power for all components and crashing when the HARD drive try to launch at startup. Or the SATA controller is defective and only work for the STRANGE. Everyone knows this problem or have ideas of how to solve? My best guess is replaced to the needs of the motherboard, but I'm not sure that I have never seen it before.

  I would check with another HARD disk, if possible, as I agree it is probably most associated MB but... worth a try.

• Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1

  Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1, and I can use the cursor with a mouse. I also installed the synaptics/elantech drivers but it does not show scrollbar option in the mouse-> device settings.

  SOLUTION

  So guys after a thorough research and troubleshooting, I found that you must keep the opinion of a few things at installation time:

  Installation mode: UEFI (only) - LEGACY would create problems touchpad.

  After the installation of windows just follow the hierarchy of driver installation

  1 Intel NB_Chipset_M Baytrail-M

  2 Intel i/o driver

  then the rest of the shit.

  Note: after doing all this make sure your touchpad is active > Fn + F7

  Just wanted to if this solution came from an Executive of acer, the world would have been a better place , but in any case this is what the community is for.

  Enjoy everyone

  [private under the leadership of life]

• Acer Aspire 8943 G Touchpad does not, the updated driver is installed

  I instaled and uninstalled it a dozen times, used system restore and cannot get the touchpad to work Acer Aspire 8943 G, please can any one help?

  Something strange happened. It would not work no matter what I tried. I was watching a movie on KODI formerly XBMC. I accidentally hit the keyboard and the mouse moved. I pressed the video button and it lit up. The only thing I can find is that it took several hours for updated driver to work, or the video triggered the Touchpad.

  I uninstalled and deleted all instances of the driver including the reserved system created by a MS Tech backup when my Windows Ultimate has become corrupt. Initially, it was Win-7 Edition Home Premium and when it would not install IE10 when MS gave me a free upgrade to Ultimate.Even then it took a week to finally get installed IE10 because the computer did not have Service Pack 1. Congratulations to MS Techs, they called me several times and worked on my computer. Him spoke excellent English and are based in India. Computer laptop is out of warranty and Acer said enough so be it, I have to pay. MS did not charge me a dime.

• HP Pavilion - 15-ab045sa: a few gestures of precision Touchpad not working not

  Hello

  I'm new to the forum, so I hope I posted in the right place.

  My product: HP Pavilion Notebook - 15-ab045sa (ENERGY STAR)

  I have all the gestures of touchpad usual work (three stroke of finger etc).  However, the recent to THE introduced a new gesture to switch virtual desktops. I was really looking forward to this update, but this gesture does not work! I tried to reinstall the update with erase everything and it still does not work!

  I don't understand why it does not work as I have a touchpad of accuracy and all other gestures of work except this new! Also even if some gestures of work (for example three finger swipe), I don't think that win 10 recognizes the touchpad of precision like under settings of the mouse and Trackpad, what it does not say that I have a touchpad of precision and so does me no options to change what are the gestures, as it should.

  I have the Synaptics TouchPad of SMBus 19.2.11.38 driver (21/07/2016).

  Would really appreciate your help as I was really looking forward to the new gesture switch virtual desktops.

  Thank you.

  Just got an update via windows update Synaptics update to version 19.3.11.37 - it finally allowed me to have the film 4 finger to switch virtual desktops!

• Equium U400 touchpad not working not

  Laptop repair of my daughter: screen dead, volume control wrote letters to the screen when you use and the touchpad no longer works.

  Replace the screen and the palmrest which included the touchpad, but still can not touchpad to work.
  any suggestions?

  Now, the screen is good, but no idea what to do with control of volume.

  Any help appreciated.

  > Screen is now good, but no idea what to do with control of volume.

  I had a similar problem in my case it was related to dirty sensor.
  I could clean it with a jet of compressed air perhaps it was little dust between the volume wheel and the sensor that knows to clean it worked.

  On the touchpad:
  Well, I put t know what might cause this are sure you that it is not disabled by Fn + F9 key combination? Check the BIOS settings not sure if there is an option for touchpad but many BIOS also contains the power button for touchpad
  Otherwise, it might be possible that you have made some mistakes, while replacement of this part is all the cables connected properly?

• HP Jet 11 - d 010wm: touchpad not working not

  Hello

  I have a HP flow 11. I have upgraded to Windows 10 and had no real problem until I decided to update the drivers (I sent a message that drivers were outdated). I generally don't click on something like that because it causes problems and it was obviously the case.
  After the update, the touchpad stopped working. I tried various fixes, but nothing has worked.
  
  At one point, I went into Add / Remove programs and remove the touchpad Synaptics hoping that, when I rebooted, restart located the touchpad and the driver and reinstall correctly. I was wrong and I think it was a huge mistake on my part. Now I can't get the driver to work I downloaded.
  
  Is it possible that I can get the touchpad to work again. I use a mouse and that works fine but not effective for a laptop.

  Thank you

  Alisonf1

  There are five drivers chipset on hp.com for 11 stream and one is required for the touchpad work, I think it's Intel series IO driver without the support of connected intelligence.  Who install and reboot and see if that fixes it and if not, install the other four.

• Satellite A100 PSAAR: Synaptics touchpad not working not not on Vista Ultimate x 64

  I decided to upgrade my XP 32 bit Vista x 64 Ultimate on my PSAAR A100.
  Operating system works perfectly except one thing - touchpad, which work perfectly under XP, is not answer at all under Vista x 64 (with SP1 of course).

  Worse, it's that my touchpad (Synaptics) is listed in as a work Device Manager correctly. Hmm - I don't remember. Meet your possible suggestions - I tried to reinstall, I tried to use the A200 drivers (since Toshiba does not support drivers for Vista x 64 for line A100) and even had the newer drivers from the Synaptics site. Update Vista even me has new drivers - cool, I admit, but it still does not work, even if Windows does not seem to "know" about any help would be very appreciated :) it...

  PS (optional problem) I also have 2 unknown according to Device Manager devices - since I have no idea what they are, and because I don't think I'm missing something - I simply gave up on top of those - at least for now ;)

  Of course, nobody here the solution for you. :(

  Problem is that this model of laptop is not supported for Vista 64-bit. I don't really know what you can try. Maybe install driver designed for A300?

  I don't really know. You can use an external mouse with success?

• Touchpad not working not not Z580

  Hello.

  First of all, I hope that my post is placed in the right place.

  Since yesterday my notebook computer touchpad (Z580) stopped working after full initialization of Windows 7 (I can use it for a few seconds) so I know it is not a material thing. I've also updated my drivers, still the same problem. And I can still use a USB mouse.

  I searched the internet a solution but without success.

  I have my laptop for about a year and I'm very happy with it.

  Hope someone knows the answer.

  Jeroen.

  Tanks, but since this morning my touchpad started working properly again without doing anything special.
  I don't know what started the problem, I tried many different things without success, I also restarted my laptop several times yesterday, nothing worked.
  But I'm glad its not now.

  Thank you for your support.

  Topic can be closed now.

• Y500 two-finger-tap touchpad not working not

  Hi I bought my Y500 a few happy days with her and there are in general. However, one day the two le deux-doigt-tap (par clic droit) sur le pave tactile - finger - tap (by right-clicking) on the touchpad stopped working. Here is a description.

  Everything else as far as I know, including the two fingers scrolling and the tap of a finger, etc. work well, but the tap two fingers stopped working even though it worked fine for a few days. I have a suspicious as to what caused it, but I'm not entirely sure. In any case, I think that it is probably a bug and probably software. One day I went into 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->"Scrolling"->"two fingers to scroll"->"enable cabotage. I played with the cabotage for awhile and soon off again because I don't really like it. However, that's when I noticed that my tap two fingers stopped working. I have double checked that 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->" by clicking on "->" click two fingers "is set on" secondary click (context menu, drag special) ", but the click two fingers still doesn't work, even after a reboot. I downloaded the latest driver (version 16.2.18.0) and it still doesn't work. I uninstalled the driver and installed it again and it still does not work. Now, I like to use the touchpad, but really hate to live without tap with two fingers for a right-click. Please help me with this, I thank you in anticipation.

  It seems to me a solution, but I don't know exactly why he has solved the problem. It seems that the problem might be that while the Synaptics touchpad device is a PS/2 device, it keeps software interference (of some sort) by being recognized as a SMB (System management bus) device. Which solved the problem for me was to go to 'device manager'-> 'system devices', locate "Synaptics SMB driver", and either disable it or remove it. The two-finger-tap touchpad must begin to work immediately.

• Deducting do not WI - FI in my new Aspire E1-571

  My Acer Aspire E1-571 with newly installed and also loaded windows7 os software driver laptop too. But the wifi connect not in my laptop after formatting it. Please suggest me how to fix it.

  Ok.

  Looking at your device manager, it seems that you have no WiFi driver installed at all.

  Go to the Acer download site (or that of your location):

  http://www.Acer.co.UK/AC/en/GB/content/drivers

  Select the operating system you are using.

  There are a number of different WiFi drivers depending on your hardware.

  Select and install according to what is correct.

  If you have any doubts, run the detection program:

  http://Global-Download.Acer.com/FilesDownload/HWID/HWVendorDetection.exe

  Let me know how it goes from there.

• Pavilion dm1 touchpad not working not

  Pavilion dm1 touchpad not working not not using windows 7 Home Edition.
  In Device Manager, I see that the external USB mouse, witch synaptic touchpad does not work.
  Can someone help me please.
  Did all the updates that are offered by HP

  Hello Terry,

  Thanks for your help but the touchpad seems to be defective.

  I use a usb mouse.

  Kind regards