Aspire S5 - 391: Touchpad not in Device Manager, does not!

Similar Questions

• NB250/Device Manager does not recognize webcam

  Hello:

  I have NB250 with Windows 7. There is no indication of a webcam. Device Manager does not recognize it either. I know that there is a download application to search for it on my computer but I don't know where to look for it. Thank you.

  Post edited by: chizuka

  Check if the webcam is enabled in the BIOS.
  To access the press of BIOS F2 when starting the

• Device Manager does not display devices

  Control Panel takes me to the MMC, but Device Manager does not display devices

  Hi Bandjo,

  ·         Device Manager is empty?

  ·         You have made any changes recently?

  ·         You have installed Windows XP Service Pack 3?

  Check to see if this article helps you.

  None of the items appear in the device list manager when you open

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Device Manager does not display c or D drive.

  The Windows Device Manager does not display the drives c or d.  With File Explorer, they show and are easily accessible.  What's wrong?

  Hi Alberini,

  You would actually use the Device Manager to determine which devices are installed on your computer, update driver software for your devices, check to see if hardware is working properly and change the hardware settings. You can also use Device Manager to update a driver that does not work properly or restore a driver with its previous version.

  To view the files or the drive hard internal to your computer, would use you Windows Explorer.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• W7 Device Manager does not recognize the Intel AMT devices

  Please help: where can I find - how to install the latest drivers Intel AMT for Windows 7.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that the Device Manager does not recognize the Intel AMT devices

  What is the brand and model of the computer?

  Check out these links and see if they help.

  Computers that use Intel's vPro technology can have devices that are not recognized in Windows 7 Device Manager

  http://support.Microsoft.com/kb/976728

  Clean installation WARNING: Back up your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files.

  If your motherboard supports AMT technology, you can download, install the drivers from this link.

  AMT: Intel® AMT Driver for Intel® motherboards

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?&DwnldID=16936

  Note: This download is valid for the products listed below.

  Intel® card mother DB43LD

  Intel® card mother DQ43AP

  Intel® card mother DQ45CB

  Intel® card mother DQ45EK

  If the problem persists, I suggest you to contact Intel support. http://communities.Intel.com/Community/Tech

• Equium P200D PSPBNE: Device Manager does not display the DVD - RW DVR-K17A ATA DVD / CD

  Hello experts out there I need urgent help!

  My Equium P200D all of a sudden she decided to show the CD/DVD drive in device as Manager no longer works due to a corrupted driver?

  I am running Vista Home and despite the removal of the drive and trying to update the driver, nothing seems to work can anyone help, I came to a point of throwing out the window.

  Concerning
  Stephen

  Hi dude

  This problem is known to me it happened to me also
  The problem is that you register Windows!

  A registry entry is corrupted and this is why the CD/DVD-ROM does not like I should.

  So what to do.
  First remove the driver from the Device Manager. Simply remove it.
  Then access the registry and and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop.

  Check it out

• Device Manager does not not in Vista Home Premium 64

  Well, I tried to help others in the hardware section so maybe someone here can offer some advice for me.

  I'm running Vista 64 Home Premium on a dv9700.  For more than a year the Device Manager did not work.  Everytime I try to open an error window appears which says "mmc.exe - bad Image".  I also have a similar error window when I try to open MS Paint and several other utilities like the option "Manage" when I right click on my computer.  In the fault window is a big red X and it says: "C:\Windows\System32\odbcint.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or support software provider. "In the case of MS Paint, he says"mspaint.exe - bad Image"at the top of the window of the fault, although he then gives the same extended error description as above.  I think that the root cause of all this might be a bad odbcint.dll file, regardless of who is.

  The problem has existed for some time, but I would like to be able to reuse my device manager to check the dates on the drivers and things for updates.  I know I could probably use the system recovery option, but I prefer not to return to the factory default state and having to reinstall all programs, I've added since I bought this computer almost 3 years ago.  Windows used to have a repair option that would repair the system files without deleting the installed programs.  I can't find that on Vista.

  I have already run the SFC/scannow utility from the command prompt at the level of the system administrator.  It passes through the system for a long time and then says it finds corrupted files, but could not solve some of them and go to CBS. LOG file for more details.  When I try to open this log file, it says: 'access denied', even if I have the system administrator access level.

  Someone at - it give me advice without having to restore everything to default "as shipped"?

  Hello

  RoadiJeff wrote:

  DavidPK wrote:

  Hello

  If it is primarily the .dll files that are corrupted, you can try to replace them by downloading a copy from the library on the link below.  For example, mmcndmgr.dll avoids Device Manager works if it is damaged.

  http://www.dll-Vista.com/

  Kind regards

  DP - K

  Thanks for the link DLL Vista d/l.  I didn't know who was available.  I downloaded odbcint.dll which the fault indicates that this file is either damaged or missing and replaced him in the windows/system32 directory.  Also, I did the same with the file mmcndmgr.dll you mentioned.  I get always the fault of odbcint.dll every time that I try to use the devices, MS-Paint, manage and probably several other things that I have not tried.

  It seems that the only option is to restore the system to default if I want to get this working again.  So during my research, I learned that the downgrade to an older version of Windows is free.  I wanted to sort of go back to Windows XP from Vista 64 that accompanies this laptop since I got it.  I have a Windows XP Pro installation disc that I bought for my desktop PC and all I would need is a free Microsoft activation key which told me they would provide decommissioning.

  However, the support section driver and software for Windows XP here on the site Web of HP has rather limited resources compared to the options for my dv9700 Vista CTO.  On the one hand, there is no graphics driver listed.  I know I probably d/l anything directly form the nVidia site, but this is not the only driver XP or absent utility of the product support for my computer page.  I guess I'll probably use just the recovery Vista DVD that I made when I got my laptop, if I decide I want to do this.

  A F11 recovery that accesses the Recovery Manager in the laptop's recovery partition would be a good plan. When a Windows operating system beghins to exhibit behaviors such as yours is so it's just a matter of time before is no longer, it will start up in Windows.

  I recommend that you create a CD to recover fees just to have the value.

  It is actually faster and more reliable to perform the recovery of the Recovery Manager in the recovery partition from the wear of your DVD drive and recovery CD set since the purchase of your laptop.

  Best regards

  ERICO

• Device Manager does not recognize 8600 scanner and therefore not recognized in other applications

  I recently replaced my HP6100 with a HP8600.  A set of software picture Organizer does not recognize the scanner unit and so I can't scan photo to this software.  Printer features work very well, but I can't get the Device Manager to see the device as a device image.  I use Windows 8.1 on a laptop Lenovo Twist/tablet.  Please help me understand what I need to do to get Device Manager to recognize the scanner.

  Thank you!

  Hello

  Sounds like something is missing when installing. Please, download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-129932-1/HPPSdr.exe

  Kind regards.

• Device Manager does not detect the gpu performance

  Hello everyone, I've had my laptop for a couple of years now. He is currently the normal edition of HP Envy 17 t - 2100. A time back well before this problem I had to re - install windows 7 and of course while I downloaded all the drivers. I was still not able to download the switchable graphics driver / program. I don't know if this is related to the issue or not.

  The MAIN question, I though, is that my laptop no longer recognizes the high performance GPU (AMD Radeon 6850 M). I tried to install the drivers, uninstalling and reinstalling again. But no luck. If someone can point me in the right direction or has any idea what I can do, I would be very gratefull!

  Hi JoshSa,

  Thank you for visiting the Forums HP's Support and welcome. I read your son on your t-2100 HP Envy 17 laptop and graphics problems. Here is a link to your driver and software for graphic design. Download presents first and then uninstall what you have within you the graphics drivers in Device Manager.

  I hope this helps.

  Thank you.

• HP G6-1184SA: Bluetooth problem - not installed / display upward in Device Manager - does not at all - HELP!

  Hello

  I just reinstalled windows 7 64 bit on my HP G6-1184SA.

  I managed to get all the other drivers to work from the Drivers HP section on the Web site.

  However I have a problem with drivers Bluetooth.

  • It does not appear in Device Manager.
  • It is obviously not working and I don't even know how I get it to the settings to find/installation/use.
  • I tried all the drivers Bluetooth 4 under my driver on HP product page. (2 of the drivers made me have BSOD and I got in safe mode to remove).

  So basically, I want to get the Bluetooth on my laptop at work - there is no key on the keyboard or button to activate it - but I know there are as I've used it before you reinstall the operating system.

  Please notify.

  Thank you.

  Hello:

  The page on the link below product specification indicates that your laptop does not come with built-in bluetooth.

  If so, this feature would be are indicated as well as the specification of 802.11 wireless connectivity b/g/n.

  http://support.HP.com/us-en/product/HP-Pavilion-G6-1100-notebook-PC-series/5082224/model/5119776/document/c02863651/

  If you still believe without a shadow of a doubt that your laptop came with bluetooth, little matter what the State of the record, then the only suggestion I can offer for you to install the HP software Connection Manager and see if you can turn on the bluetooth car radio using this software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112799-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5119776&sw_lang=&product=5119775

• Windows XP: Device Manager does not recognize modem?

  I wanted to configure Microsoft Fax. Everything was fine, but the Device Manager did not recognize modem, so I can't send and receive faxes.

  Thank you in advance!

  Hello

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: The modem settings are missing after you remove and re-insert your Modem
  http://support.Microsoft.com/kb/321036

  Method 2: Install, configure, and send faxes in Windows XP

  http://TechNet.Microsoft.com/en-us/library/dd346629.aspx

  For more information, see the links below.

  To remove a modem

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/MODE_REMOVE.mspx?mfr=true

  To install a modem

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mode_installmodem.mspx?mfr=true

  I hope that helps!

• Aspire E1-571 touchpad not working not

  Dear Sir, iam using aspire E1-571 laptop.it is bought on last august.but currently this touchpad not working.iam using usb mouse.please solve my problem quickly.

  Have you tried to turn the touchpad with the function key?

  FN + F7 I think

  A symbol:

• Vista Home Premiun Device Manager does not display my CD-ROM/DVD-ROM drive

  I recently tried to use my CD-ROM/DVD-ROM drive and it did not work. It was working fine a few days previously but now... Nothing.

  My first reaction was to open Windows Explorer, expand and look at computer. There was my C drive and the recovery Partition but no Opitical drive more.
  Then I opened the Device Manager and saw that the CD was registered it is more as well?

  My question is

  Vista automatically removes the CD-ROM drive in the list of Device Manager if there is a problem with the drive itself?

  Or is there something that happened this suppression the CD-ROM in Device Manager list and it is not a problem with the drive itself?

  I had a disc go bad before on a PC running Windows 98 and 2000, but the disc stayed in the Manager list but I'm pretty new to Vista and know things are very different. So before we get in panic Mode, I thought that it would be a good idea to ask where someone will know probably for sure.

  Thanks in advance for clues

  Len

  Hello

  1st try a restore of the system if you have a point of return before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------

  If no joy:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• My Device Manager does not see my Dell webcam integrated monitor. It worked great for a year. We just moved. What has changed and how to fix it?

  Went to Device Manager.  It shows my laptop integrated webcam and shows my printer/scanner "cameras".  But it does not show the built-in webcam of the independent monitor, and I can't find how to get the Device Manager to see the device.  Help!

  Hello

  Dell should have drivers and the control software available on their site. Please refresh your
  If possible driver and reboot before you load the new driver.

  Dell - drivers
  http://support.Dell.com/support/downloads/index.aspx

  Help generic camera:

  Control Panel - Device Manager - click anywhere in the box of white/white - then VIEW - Show Hidden
  Devices - look everywhere except IMAGERY for your camera and if found right on it - click UNINSTALL
  -REBOOT.

  Control Panel - Device Manager - click anywhere in the box of white/white - then ACTION - Scan for
  Hardware changes. If that detects your camera, then load and restart.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack. While there or not the USB update, then go to DELL and
  Download the latest version of the driver

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  Now, go to the system manufacturer (Dell) website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Please check with Dell Support and forums for help and known issues:

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.