Aspire E1 - 571 does not start

Similar Questions

• Aspire E1 - 571 does not start USB recovery

  Get the error message saying phone needs recovery. Went into BIOS and selected USB HDD to boot. But as soon as I insert the USB key, the machine goes in loop simply display the Acer logo, black screen. Reflected on the USB (purchased at dealer) and there are files it contains. I tried to start USB FDD and USB, CD ROM, but they do not work either. What Miss me? Help please.

  If you need to reinstall your operating system:

  If your laptop still has the Acer erecovery partition, you can simply start by pressing ALT + F10 and follow the on-screen instructions.

  If you don't have this partition and want to use your USB recovery to reinstall your operating system, you must completely wipe your HARD drive first and then boot from USB.

  You can boot from USB drive just by pressing F12 and selecting the USB flash drive as a boot device, rather than change the BIOS boot priority.

  If your question is different, please post more details.

• Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

  Acer Aspire E1 471. 8 64-bit Windows.

  It does not seem to recognize any boot device.

  Already tried:

  -F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.

  -boot from usb, dvd... the screen turns black after the screening.

  -forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)

  Any suggestions?

  Hi FerminSampo,

  We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.

  a. starting from hirens CD.

  b. try these commands from the command prompt.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  c. restart the computer and check if the problem persists.

• Acer Aspire 5742Z Notebook does not start

  I am running Wndows 7. When you press the button "power on", that the power light turns on, the fan starts, the DVD player made his usual noise and then after 3 seconds, all this stops and all the lights go out. The system restarts immediately, and the process is repeated - over and over again. He just constantly loop. There is nothing showing on the screen at any time.

  I checked the RAM and HARD drive and they seem to be OK. I removed the DVD player and tried different combinations of race on foot with and without lead power and battery connected. All to nothing does not. I can't access the BIOS even by using the Fn + Esc key combination.

  I'm now leaning to believe I have a probem m/Board.

  If anyone has a solution I'd love to hear it!

  Shrappers,

  Looks like you are on the right track and did all the correct steps for the issue. I agree that the problem is hardware related. All devices seem to be powered, but the loop could be linked to the motherboard.

  If you are looking for repair, please contact technical support in your region. If you want to repair yourself you can always contact one of our partners in parts for a motherboard.

• Acer Aspire S7 392 does not start after the new Antivirus installation

  Hello

  I bought the Acer Aspire S7 392 in October this year of digitec.ch AG here in Switzerland. Everything worked well until December 19 when my Antivirus McAfee has expired and I decided to change my Comodo Internet Security antivirus. A month back, I had installed Windows 8.1 as well and things were smooth until last night. Last night, when I installed Comodo Internet Security, the computer requires a restart, I did, and then my computer erased. I could not even reached the Acer logo at startup.

  As I tried to check the observation of details of covers them this white screen problem, Irealized that many people suffer from a similar problem. It seems that Windows 8.1 and an installation of a new antivirus may have led to this white screen problem. In addition, it seems to be a bios problem that the computer would not start and I hope that someone could help me with this problem.

  Thank you very much Acer-Tommy. I had to take it to the Acer Support in Switzerland. He partially solved the problem. My S7-392 has a built-in battery that I had to reset which allowed the laptop to reboot normally. As in, I was able to boot up to Windows 8.1. However, as soon as I logged into Windows, it hooked up soon. Do the restart 3 times triggered the automatic repair/update option. That I took and returned to Windows 8. I had a Bios 2.05 2.03 intead and I had to install 2.05 before making updates. I recommend you seriously all the people who use the S7-392 to strictly follow the installation procedure for Windows 8.1 mentioned on the Acer site.

  Please update your Bios to 2.05 before installing something new, especially a new anti-virus.

• Acer Aspire laptop computer does not start

  Lites button power screen stays black, the system tries to start, but he keeps power button light turns off.  I have a new disc of windows 7 32 & 64 bit.  I have the disc as a dvd before I turn on the power button.  With the new windows 7 dvd of 20 to 30 seconds to place power turns off.

  Anyone with knowledge of this problem would be grateful.

  Thanks in advance

  Hello Mojo,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?

  2. What is the brand and model of your computer?

  3. What are the troubleshooting steps you have tried so far?

  I understand that you are unable to start your Windows 7 system. To prevent your system from automatically restart, try to access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Select the option disable automatic error system reboot. Also, I suggest you try the following steps of diagnostics to verify if you are able to reach the office in one of the following modes methodical.

  Method 1:

  Please follow the underlying steps:

  Step 1. Disconnect all external devices except the keyboard and mouse.

  Step 2 I would like to start your computer in last known good configuration.

  If method 1 does not work, go to method 2.

  Method 2:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If method 2 does not work, go to method 3.

  Method 3:

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally.

  If the problem persists, proceed to method 4.

  Method 4:

  You can use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)

  • A boot sector

• A Boot Configuration data (BCD) store

Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows 

Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Acer Aspire One 522 does not start

  I replaced the RAM of 1 GB in my 522 an Aspire. After that the netbook starts not more. Only the blue power led flashing and I hear the fan. I can only turn off by pressing the button for 5 seconds. The screen is black and I can't access the bios. Now the laptop no longer starts with the original module either. I'm looking for a way access the bios, but I found nothing for this model on the internet. Hope someone can help me. Thank you

  Finally, I took a better look at the RAM module and the slot. Although I replaced the modules many times it seems that they were not properly placed in the slot. In any case, it works with my new 2 GB module.

• Aspire 7750G Bluetooh does not start

  Hello

  I bought a used aspire 7750 G-2638G75Mnkk [redacted to comply with guidelines] with a damaged hard drive, so the Méthot recovery to reinstall Windows would not work.
  After installing Windows 7 64 bit, I downloaded and installed all the relevant drivers for my system here.

  -AHCI_INTEL_10.1.2.1004_Win7x64
  -Audio_Realtek_Win7_64_VER6017213
  -Bluetooth_Atheros_1.0_W7x64_A (6.33.1123.0302_W7x64)
  -Bluetooth_QualcommAtheros_Win7_64_VER801318
  -CardReader_Realtek_Win7_64_VER62920027040
  -Chipset_Intel_9.2.0.1015_W7x64_A
  -LAN_Atheros_1.0.0.36_W7x64
  -Touchpad_Synaptics_15.1.6.0_W7x64
  -Turbo Boost_Intel_2.0.82.0_W7x64
  -_2.0.26.0_W7x64 USB_NEC (3.0)
  -WLAN_Atheros_Win7_64_VER1000285
  -LaunchManager_Dritek_5.0.3_W7x64_A
  -the VGA driver woudn't install, but Windows Driver Update did the job

  There are unknown or problematic devices is no longer in Device Manager anymore and my Atheros AR5B97 wireless card has an option for bluetooth in the settings of the advanced device, which is enabled.
  I manually put the bluetooth support service automatic and it runs at the start of the system, but there is no blueooth service in the list is located.

  When I install the Bluetooth Suite (two links, either one after the other), I see a link "More Bluetooth" in "All programs", which opens just a blank window with the possibility to add devices. I can't found, because BT is not running.

  By pressing Fn + F3, as suggested in another thread here, turns only WiFi on and outside, not BT

  A I forgot to install an application or driver? Or some other required is missing software? I have. NET4.5 and MS VC ++ 2005 installed.

  Or my model, similar as the one in this thread to arcived not has the capabilities of BT at all? My device settings think otherwise, however.

  Thank you for your help.

  What is reasonable too, like some sounds and some did not. You can order the Acer erecovery media for a nominal cost that is specific to your system, which should receive all installed devices initially up to-and-operational unless they have been somewhat damaged.

  Jack E/NJ

• Aspire Switch 10 does not start - need assistance to access recovery

  While improving to WIn10, the process failed at around 12% and restarted at a blue screen that says

  --->

  Recovery

  Your PC needs to be repaired

  A required device is not connected or is not accessible.

  .......

  .....

  Press the windows key for UEFI firmware settings.

  <>

  In the bios, I set boot order to USB HDD first and secure boot disabled. I put a Win8.1 USB thumbdrive made in Rufus... when it starts, the USB flashes because it is accessible, but it does just the same blue screen mentioned above.

  Help, please

  first try keys Alt + F10 at startup and check if you are able to enter in recovery.

  If this is not the case, Switch 10 use 8.1 Windows Home or with Bing, you should check with the exact model or by looking at the labels on the box.

  SW5 - xxx

  If it's the Home x 86 version:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Use the download tool and download the iso of the home version and then burn with Rufus as TPG and FAT32.

  or you can try a clean install of windows 10

  http://community.Acer.com/T5/knowledge-base/Windows-10-installation-recovery-media-creation-and-use/...

  or buy the original Acer recovery media:

  Acer recovery media
  WE:
  http://us-store.Acer.com/eRecovery/RCD/

  Canada:
  http://Caen-store.Acer.com/eRecovery/RCD/

  If you live outside the United States and the Canada, you must call/email your regional Acer support service:
  http://www.Acer.com/worldwide/support/

• Acer aspire e1-522 does not start

  Hello
  I have had my acer for almost 1 year now and recently started having really slow down and freeze until it got bluescreen. When it restarts automatically then it restarts.
  He gets just stuck to loggo Acer screen.
  When I then try to restart it myself it always gets stuck there.
  I tried to get into the BIOS but I can't. Tried pressing F2, F8, Alt + F10, F10 still stuck to the Acer screen.
  I'm literally stuck on the Acer screen. When I bought the laptop to the store I got it in a box and I didn't get a restore with her CD so I can't do anything from here.
  I saw in a forum that I could try to remove the battery, the charger and everything connected then hold powerbuttton for 15 seconds and then plug in the charger. Still stuck at the acer screen... Does anyone know what I need to do? Since then, I can't enter the BIOS Gets a little difficult to do nothing at all...

  Hello

  Based on your entry is probably HARD, his best contact Acer drive question as you issue with BIOS as well.

• Aspire 12 switch does not start.

  I have a 12 switch aspires. Suddenly, without switches or ports on the monitor might work, although the keyboard would be. Then it turned off and won't turn on again. Any advice, please?

  first check if the LED on the button blu works / stop light upwards or not.

  If not, try a long button press power + volume UP. If he succeeds, it will boot to the BIOS, once out of the BIOS without saving changes and it will boot to windows.

  can you please point out the exact model?

  SW5 - xxx

  Maybe a BIOS update is required.

• My ACER ASPIRE 4551 G does not start

  When I try to turn it on, I just get a black screen. The fan starts but stops eventually. When I try to hard reset it it turns off the fan just starts again. I have to plug it into the AC for I can be able to feed it again. And also, last thing I remember is that the clock is not always on sync every time I start it. Help, please!

  Hello

  You probably have a problem of DC connector. I suggest you clean it after removing the battery.

• Acer aspire 10th switch does not start the Bios Setup screen

  I'm trying to start on the bios Setup screen to change the boot sequence to test a rescue disk/windows 10 install usb, but all by pressing f2 during POST it just boots to windows of ideas anyone? Thank you

  power the device turned off, press and hold the power + Volume UP

  After awhile, it will boot to the BIOS.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.