Aspire Z5771 all-in-one

Hi all

I bought my Acer Aspire Z5771 (in Thailand) a few years, always on, very happy with it.

I bought Windows 7 and immediately upgraded to Windows 8 with a few hiccups, but finally got the fact.

Now, I can't do the next update of Windows 10. I have tried several times, but in vain. The process get stuck somewhere in the installation, and possibly the computer comes back to Windows 8 after rebooting.

I looked on the internet for clues and tried a few things, like unplug all USB, cables, internet etc. Nothing works.

Has anyone lived here cela and managed to successfully install Windows 10?

Thank you very much.

Phil

If it does not work well, I would upgrade to Windows 10. It is not supported by Acer for Windows 10 and you will probably have a lot of driver problems.

Tags: Acer Desktops

Similar Questions

  • I need to replace the hard drive of my Acer Aspire all-in-one 5600U?

    I have an Acer Aspire all-in-one 5600U. The other day the power in our House went out due to a storm. After she came back and went to use my computer, the screen was black and said "Reboot and select proper... boot device." ». I tried to download the tool of creation of media to a USB port and start the system using this. I can get into the menu troubleshooting but nothing works. When I try to make a custom Windows installation, it says "no signed device drivers were found". What is a hard drive problem? In the BIOS, under Boot Options is does not list a specific hard drive. It just says: 'hard drive '. Thanks in advance for any help or suggestion.

    Thanks, that's what I needed to know. Appreciate the help, IronFly.

  • Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

    Hi all!

    This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

    I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

    Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

    Windows 8 Developer Preview, 64-bit

    Windows 8 Preview of consumer, 64-bit

    Windows 8 Preview, 64-bit version

    In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

    So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

    After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

    I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

    Thanks again,

    Mike

    [edited to conform to the guidelines]

    Hello Mike

    I sent the pilot. Please test and advise.

    Kind regards

    FReeZA

  • F4140 HP all-in-one will save not scanned

    I wonder if someone can help me with my scanner.  My OS is Windows 7.  It's an HP f4140 all-in-one, connected to my laptop Aspire 5251.  The last time I used the scaqnner somewhat successfully, it wouldn't let me save a document of any kind except as an image.  Now, it won't save to the computer.  I did all the help files told me to do, but not luck.  Then I uninstalled and reinstalled, again without success.  I followed all of the suggestions, especially the one that was supposed to solve this problem, again without success.  I do not understand what message about what is wrong with it.  I don't give me the option to save at all.

    I finally have it. I got in trouble because she was in the wrong place. Thanks for your help.

  • The acer all-in-one A7600U-UR308 can be installed on a wall rack support/arm?

    The acer all-in-one A7600U-UR308 can be installed on a wall rack support/arm?

    I'll post something that comes to light. I was apparently not aware of this.

    There is a montage of available with/for the Aspire 5600U wall / desktop all-in-One computer 7600U.

    I can't guarantee that this part will be delivered with all systems, but it should be available to the command if it is not shipped with the system.

  • All-in-one printer, Brother DCP-7020

    I have an acer aspire 3610 laptop I would like to print on brother dcp-7020 printer all-in-one and it wouldn't print it would not install the printer do I need a driver down load

    Get the drivewr package and install it according to the instructions. Do not fix the uinit computer until direct by the instructions written wherther or screen.

    http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_index.html?reg=us&c=us&lang=en&prod=dcp7020_us&dlid=&flang=English&OS=7&type2=-1

    Tom Ferguson

  • Printer send error reports all-in-one HP PSC 2355 'remove and check color cartridge '.

    When sending of works for the all-in-one printer HP PSC 2355 of my laptop Acer Aspire with Windows XP and a USB connecton,

    I get an error message on the screen flip to say remove and check color cartridge. I do this, but nothing has changed and now the switch does not work either as a result I can't do anything, it's just frozen.

    If anyone can help I would be very gratefull, but please remember that I am a complete novice with these things.

    Thank you

    daisy70

    Hello daisy70,

    Because the printer is frozen we will start by doing a reset of the printer. Instructions available via this link and posted directly below as well.

    Reset the printer

    Follow these steps to perform a reset of the product.
  • How can I get an all-in-one Kodak ESp 3250 printer to scan to a laptop Acer As.pire? I tried to download the driver on the Kodak website

    I tried several weeks scan documents from a Kodak on my notebook Acer Aspire all-in-one printer. Prints the document very well, he won

    ' t scan. I'm tempted by a new printer.

    Hello

    I know not true with Kodak printer\scanners, but my Lexmark has a program to be launched and digitization of breast...

    This is mainly because the OCR... Optical character recognition function...

  • HP Photosmart 3210 all-in-One of network error printing from Windows 7

    Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

    -message is "error printing".  Printing to the same printer via USB connection is successful.

    Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

    Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

    to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

    Hello

    Thanks for posting,

    This may be a problem with ports,

    Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

    If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

  • need to find software to download HP Officejet 6500 more e-All-in-One-E710n-z a

    HP does not print. called apple support and deleted driver. now I'm unable to find the driver to download on iMac there.

    HP Officejet 6500 more e-All-in-One-E710n-z a

    Help, please

    Thanks marianne

    You need to access the support Web site HP and search for a driver for your printer, then download it from here.

  • I would like to see all the emails of my 3 email addresses different all in one component - as in Outlook. Is this possible?

    I get emails from multiple email addresses and would like to see them all in one place instead of having to click 5 different folders to see what's new in each of them. Is this possible? Any help is appreciated!

    Question in 2014

    How can I read my incoming e-mails in a single folder? As I do in Live mail and Outlook express.
    https://support.Mozilla.org/en-us/questions/1009047

    Looks like you need.

    TB - 38, 3 Win10-PC

  • Question of All-in-One-Sidebar

    If someone uses it can you tell me is there a way to get the points bookmarks bar to display in the sidebar? I have the bookmark icon there but it only shows the normal bookmarks in the browser drop-down list. My bookmarks bar is not in the list.

    Thank you!
    Nancy

    Addon Page: https://addons.mozilla.org/en-US/firefox/addon/all-in-one-sidebar/

    It's like the folder "bookmarks bar" which appears in the toolbar bookmarks by default if you press CTRL + B, but it seems that you're talking about the actual Menu bookmarks when you click on the Menu bar > Favorites and you can see all the folders. In this menu, I see also bookmarks toolbar folder (it has a blue star in the middle of the icon and I do not see that in your previous screenshot).

    After that do not understand I came up with a work around. I added a subfolder to the folder 'toolbar bookmarks"and everything in this folder to add a new layer. This created a single folder is displayed in the toolbar on the left.

  • How can I uninstall the sidebar of all-in-one and completely disable "LyricSing"?

    The function of "all-in-one sidebar" offers redundant and confusing capacity that consumes valuable real estate display on my old (and small) monitor. The result is that it makes several important sites essentially unusable. Please help me get rid of it on Firefox 31,0 or allow the return to an older version of Firefox that does not include it.

    Similarly, "LyricSing" uses real estate display and also acts as a great popup generator. The path to "disable" and the "current status" switch does not work on my XP-based system.

    I strongly dislike (I'm being nice) IE and Chrome! Help, please!

    You can uninstall the extensions that are more, you need or want to use.

    • You can enable or disable the power bookmarks bar by ' view > sidebar > bookmarks ' or 'Ctrl + B' (command + B on Mac)
    • You can enable or disable the sidebar story power by "view > sidebar > History" or "Ctrl + H" (command-H on Mac)

    The current releases of Firefox have a button ' show lateral bars > "in the palette to customize this feature is also in the history of bookmarks and buttons drop-down list (the latter in the list '3-bar' from the Firefox menu button).

    • Firefox '3-bar' menu button > customize
    • View > toolbars > customize
  • What is the best all-in-one printer?

    We have been endowed with a HP Officejet 4632 years and there is no interface very well

    with our Mac.  When you use the charger, it does very well with occasional off-skew

    copies and scanned documents.

    However, when copying, scanning and resizing help flat, most of the empty time

    copies out.  When that happens, it should turn the printer power off and close

    Mac and start over.

    Are there other inkjet all-in-one printers

    I used the brother 7820N - it is an older model that makes black and white printing, but it connects beautifully on the network and reproduced faithfully what ever is sent.

    I guess the answer to your question depends on whether you need printing, what kinds of things print you color and what your budget

    There are some printers that are around 120-140 dollars if you are in the United States - try Canon or HP and are looking for discounts on stores like Best Buy or Fry

  • Install the drivers for scanner and Fax for HP PC 2410 printer all-in-one

    I use a MacBook Pro with an operating system of El Capitan 10.11.4. I use a PC HP 2400 All in one printer/Fax/Scanner connected by USB to a network of airports Time Capsule. During the installation of the printer driver, the printer function to add printers and Scanners folder in preferences systems found the printer and installed the drivers. The same add function printers do not thin either driver Fax scanner. How can I load these drivers.

    Hello..

    Re download the drivers once again and then try to add scan and fax again drivers.

Maybe you are looking for

  • blackened photo app

    have a brand new 6 s after update to ios10, when I opened the app photo is blurry picture in black and don't take pictures, only slide around and video again It corrects. What's new?

  • Call to Edinburgh Lycamobile

    Hello I bought Skype package of 100 minutes free mobile/fixed to the United Kingdom. The person I am calling has a mobile sim card lyca, but whenever I try to call this person the call gets sent directly to the e-mail voice lyca, why can't connect to

  • Stop error message XP blue screen 0 x 0024

    Hi cybertek,. OK, I followed it all through, but my situation is slightly different. All I can get to is the start, regardless of menu if I use a bootable cd (I tried the method of PE Builder) or the original Windows disc. no safe mode or anything. I

  • After the update of Cryptoprevent missing v7.0 the sidebar

    Hello I've just updated to v7.0 of the CryptoPrevent. After a reboot my sidebar with gadgets isn't available to retrieve. CryptoPrevent has the following: "the pane Windows and Desktop Gadgets are a major valunerability for security and Microsoft rec

  • Why is my use of the ram to 100%? and crashing LAPTOP win10

    AN unknown process (perhaps malware) is originally svchost.exe to 16%.  I ran Malwarebytes and a file system check to start. Please download the free version of Malwarebytes. Update immediately.Do a full scan of the system Let us know the results at