Assessment of the posture with ISE for smartphones

Similar Questions

• Cannot open the URL of the CWA with ISE

  Hi people,

  I have a problem when you perform the CWA with ISE so that I can give you access to the network for the guests.

  Everything is fine except the URL of the CWA: when guests, open Explorer and enter a domain name after you have connected the SSID, they will be redirected to the URL like 'https://hostname.demo.com:8443 / guestportal /... ". " which begins with the hostname of the ISE and the domain name of the ISE, but for us, we have not any announcement and the LAN DNS for our network so that we cannot translate the hostname.demo.com in the IP address of the ISE, so can I just change the URL type of intellectual property like"https://10.10.10.70:8443 / guestportal?

  Screenshot of an attached screenshot (sorry).

  Basically it's in the authorization policy, allows you to use a static DNS or IP address

  

• In anticipation of the posture with 1.3, Agent NAC 4.9.5.10 ISE and Windows 10

  Hello

  I have a client with the patch 1.3 ISE 5 installed in its network, and it tests the connection to the network from a client Windows 10. In the client, this customer has manually installed Agent NAC 4.9.5.10, and used Anyconnect 4.2.01035 (with NAM module) as supplicant 802.1 x.

  In the ISE, the 3.6.10205 - 2 4.9.5.10 NAC Agent and compliance Module is downloaded and there is that a strategy of commissioning of the customer created in order to provide customers with this version of the NAC Agent and compliance Module if this client authenticates correctly in Active Directory. There is also a political Posture that requires that the customer have a fixed version of McAffee Antivirus from the Posture.

  When connecting to the wifi network, the client authenticates properly using the user name and, after authentication, it launches the Cisco's NAC Agent in order to pass the posture. At this point, the Agent NAC pop-up displays an error indicating that the operating system of the client is not supported, although NACAgent 4.9.5.10 supports Windows 10 and patch5 ISE 1.3 also supports Windows 10. Due status Posture maintains in State waiting, the customer is not allowed to connect with the correct permissions for the network by the ISE authorization policy.

  My questions are:

  You know the reason for this error showed by NAC Agent (client operating system not supported)?

  Do you know what are the correct versions of the NAC and ISE Agent to support customers on Windows 10 connections?

  And also, Windows 10 is supported by ISE 1.3 patch5 or maybe it's better to move to ISE 2.0?

  Thanks in advance

  Concerning

  Juan

  I'll guess that maybe the VA of Cisco and databases supported OS version are not current.  Try to go to the Administration->-> Posture--> updates the settings and click on "Update Now".

• Posture of ISE for delayed services.

  Hello everyone

  I'm just trying to find a way to delay the evaluation of posture because some monitored services are delayed on initialize-toward the top. Any thoughts would be appreciated.

  Thanks in advance.

  Concerning

  Guido

  Just give more time to run in your posture for anyconnect profile, so once the service has started posture it gets the status of 'compliant. You could also do a repair action, trying something several times, with an interval shorter to get the posture to detect service is running faster.

• How can I synchronize my favorites of the device with Firefox for Android

  is it possible that I can sync.the bookmarks on my device with Firefox for Android

  Hello

  We have just implemented this in beta version of Firefox. So if you install it, you must go into the settings and at the bottom there is an import of point Android. A dialog box allows you to import bookmarks and history. It will be in the end V15.

  Thank you
  Michelle

• move the MCs with loop for?

  I am trying to find a way to move video clips with a for loop

  I have 10 points called t1d-dt10, and I want to be able to put them all to y = 200.

  I understand that I can put i = 1; i < 11; i ++

  as

  for (i = 1; i < 11; i ++) {}

  DT i._y plus 200 ;}

  or

  for (i = 1; i < 11; i ++) {}

  String("DT"+i)._y = 200 ;}

  but the rest is a mess, and does not, work or glitches. I still have to find a loop help file for the movement of several video clips.

  If you just want to immediately change the positions of the bodies, then using a for loop works fine, you just use the notation of support [] to have the strings to be interpreted as the name of the instances...

  for (i = 1; i<>

  This ["dt" + i] ._y = 200;

  }

• Windows 2003 server lost the connection with clients for a few seconds

  Anyone know why Windows 2003 Server cut myself with clients (XP loaded to the PC) and reconnects automatically in 1-15 seconds? It happends 2 - 5 times a week. If I restart the server, it won't be for the next 2 weeks. No errors in the event viewer.

  Already tried to do the following problem and always exists

  1. Anti Virus (Symantec) disabled
  2. Connection has changed to a different network port
  3. Ping t (no offline client)
  4. Windows Update

  Total number of 25 users. 30 under license.

  Help, please.

  Thank you and best regards,

  Santini

  Eugenie,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to Windows Server in a commercial environment and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to replace the HDD with SSD for Inspiron 15R 5521?

  Hello

  I have the Dell Inspiron 15R 5521 Intel i7 with Windows 8 is installed. I would like to replace the hard drive with the Samsung SSD 840 EVO series.

  http://www.Amazon.com/Samsung-Electronics-Evo-Series-2-5-inch-MZ-7TE1T0BW/DP/B00E3W16OU/ref=cm_cd_al_qh_dp_t

  First of all, this SSD will be compatible with my laptop? Second, I don't know how to install the Windows 8 and all the necessary drivers for this laptop works again.

  I have very little knowledge of operating system installation. Can someone help me with step by step instructions please?

  Thank you.

  Hi Daniel Hong,.

  This drive should work fine. I have a link below an operating system for your reference installation guide.

• Synchronization of the agenda with Yahoo blackBerry smartphones

  In the old version of the Desktop Manager software, one of the options available to sync my Blackberry with my computer was Yahoo.  With the new version of the Desktop Manager (5.0.1), this option does not appear.  It is no longer available?  I wouldn't change to Microsoft Outlook (there seems to be a lot of problems of synchronization with that).  Any suggestions?

  Hi and welcome to the forums!

  A few places to visit: Blackberry 101     tips & tricks

  See these kb articles:

  Yahoo! calendar sync

  Applications supported for synchronization by DM

  Yahoo! is not included in the list of synchronization applications

  Let us know how it goes.   Happy to welcome you!

• Can I download only the first with discount for students?

  I can't find a way to subscribe only to first as a student.

  Am I obliged to subscribe to the whole package?

  I don't understand!

  Thanks in advance for the help

  As far as I know, students can enroll in the special regime of photograph OR the entire suite cloud... and nothing else

  But, since I don't work for Adobe, you must contact Adobe

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Linking the data with JavaScript for PDF link merge field

  Hi all

  In InDesign, I use the data merge to generate a PDF file with data from a data source file. The fusion of data will fill a product ID field. I want to write a script that changes the product number field so that it contains a JavaScript link in the PDF file.

  
  For example, the number of the product [1234-567] will launch: app.launchURL ("plsddr://localhost/1234-567 |") * "(, true);" When the product number link is clicked on in the PDF file.

  Can anyone provide an example of how this could be done, or point me in the right direction? If there is a better way to go about it, please let me know.

  Thank you!

  What findText returns is a list of text, but it is completely interchangeable with the word. It seems that InDesign can change at will between the characters, words, lines, paragraphs, and stories.

  Text can consist of a single SpecialCharacter (a column break, or a return or one of the SpecialCharacters enumeration) or a "String" standard JavaScript object - a simple Unicode string.

  The property that "holds" the text is 'content' - so, it all adds to 'get' the text that has been found, you will use generally

  Next = list.pop ();

  Alert ("the text content of this is"' + next.contents +' "'");

  and you can build further on it - use it as a URL HyperlinkDestination or something like that. The fixed points of point-'next' - text 'live', it was found in, so be careful not to change. Do something like

  Next.contents = "hey what happened."

  will change the text in your document. But it is also useful to add, for example, a hyperlink to the actual position on this text has been found.

  (A Council about the changes: you want to change your document, the original findText elements stressed will be ruined once you changed one!) To avoid this, work backwards from the last element found at the first. findText (true) reverses the order of the found items, from the last to the first - see JS help on that).

  Regarding

  (Also, how to print the contents of a Word object?)

  It depends on what you mean by "printing". On a printer?

• Create the table with aliases for columns

  Hello
  
  I don't know if its possible, but how do I define aliases for columns when I create a table (in fact, a global temporary Table - TWG)? The idea is to select the column using its name or its alias, like this:
  
  SELECT nom_de_colonne FROM mytable
  
  or
  
  SELECT alias_de_colonne FROM MaTable
  
  I work with Oracle9i Enterprise Edition Release 9.2.0.1.0
  
  
  Thanks in advance.

  You do not define aliases when you create a table, when you choose him.

  I have to say... When you use it in a SQL statement (not just select).

  Published by: SomeoneElse 18 Sep, 2008 15:10

• Can I update the bios with software for windows vista?

  I have a HP Pavilion a1747c desktop computer and I need to update BIOS for virtualization technology. However the update the BIOS only supports Windows Vista, and I have Windows 7. Can I still updated it somehow?

  Yes, you may be able to extract the actual BIOS file of the installation package compressed and use a flash routine appropriate for flashing BIOS under another operating system, but you do so at your own risk. Any damage to your computer by using this process is at your own risk and you take responsibility for it.

  Please send Bravo

• How to convert the file with VI for LabView .lib to CVI?

  Hello

  I have the .lib file for my lock in the amplifier. The lib file is written for labView and already contains a visual interface (like ActiveX). The point is that I need this file for programming in CVI (8.5). How can I convert a LabView ICB .lib?

  Thank you.

  Denis.

  You said that you had a .lib file and in fact you have an llb file. There is a huge difference between an "i" (eye) and a 'l' (ell).

  There is a LabVIEW Instrument Driver Export Wizard but it's only for new pilots of project lifestyle and you need LabVIEW. There is no other way to convert a LabVIEW driver to a driver of the CVI. If the LabVIEW driver uses methods and properties of the ActiveX, you will need to write the same thing in CVI.

• When my computer is new, he had a toolbar at the top of the screen with buttons for music/email/etc. I had it worked on last week and that the bar has disappeared. How can I get that back?

  Operating system is Vista, the computer is Dell

  It's a Dell Dock. Not a part of Windows.
   
  Start | All programs | Dell folder. The Dell Dock is listed here? If no, go to: start | Search and type Dell Dock. A bit of luck with that?
   
  If you have lost your machine, you can download it here.
   
  Reference Dell Dock
  http://www.DellDock.com/