HP Photosmart Plus B210a won't come out of power save mode.

Similar Questions

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• Photosmart Plus B210a ink level by computer will not work

  I have Photosmart Plus B210a. Running Windows 7.  The function to determine the level of ink by computer suddenly won't work.  The option will not even appear in the devices & printers screen.   I install only the HP cartridges.

  It is possible, it was lost if you did an update of the Hp software. To get the option on your computer, you can download the latest drivers. Don't forget to uninstall and re install with updated drivers. When pilots selection select features complete drivers.

  Updated drivers

• Ink system failure code... 0xc19a003... Photosmart Plus B210a... Help

  I have a HP Photosmart Plus B210a printer code

  My problem is the following: -.

  The printer screen is display the following information:-the 0xc19a003 ink system failure code. Please turn printer and then turn it on again.

  I tried several times with HP solutions. Nothing worked and I just keep getting the same results. Ink system failure... 0xc19a0003... Please turn printer and then turn it on again.

  Can anyone help me please with a solution.

  HI VTHapa,

  I appreciate your help. After trying to solve my problem with your suggestions and the HP suggestion, nothing worked. So I abandoned my printer and bought a new one.

  Now I don't know how to remove my ad?

  Scooter

• HP Photosmart Plus (B210a) - part way freezes by printing

  Product name: HP Photosmart Plus (B210a)

  Operating system: Windows 7 (64-bit)

  I recently had experinece problems when you try to print. The printer starts printing the paper, freeze for a minute or two and then spit the sheet on incomplete. He will then proceed to print another sheet, outside, with black strips, running through it, either with a series of letters and symbols on the top. It seems very occasionally to print without any problem at all.

  To try to resolve the problem so far, I've updated the software of the printer, it seemed to have no effect, and I ran printing HP and doctor scan, but it can't seem to pick up all the problems. This is a wireless printer that is connected to a network, it was connected to and has worked previously.

  I hope someone can help because I'm getting very frustrated! Thank you in advance.

  Hi A0805_JKS92,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that the printer is not printing correctly.
  I'll be happy to help you.

  I turns off all startup programs to make sure there isn't something blocking the printer from printing. Click Start, in the search box type to perform, enter, and then type msconfig, click OK.

  Click the Services tab to select the hide all Microsoft Services check box. Click Disable all, and then click OK.

  Then click on the tab at the top of the start page. Click Disable all.
  Restart the computer.

  Disable any antivirus software.

  Try printing right now to see if that makes a difference.

  Then, return to msconfig and enable all the Microsoft Services and enable all Startup tab turn on the Antivirus software.

  I think that this will provide a solution to your problem. Thank you.

• I have a Photosmart Plus B210a all in one. Automatic adjustment of photos.

  I have a Photosmart Plus B210a all in one Photosmart. This allows to adjust the pictures to print. How can I disable this feature?

  To disable management of the image when you print, you will need access to printing preferences Advanced Options.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. select print options.
  5. click on the Advanced button.
  6. change the on off ICM ICM method.

  Let me know what happens.

• black and will not print on hp Photosmart Plus B210a of Window Vista model

  black and will not print on hp Photosmart Plus B210a of model

  The post here could help solve the problem.  Be sure to check the vents.

• W7 won't come out of 2560 x 1600 on my external 30 "monitor Dell

  W7 won't come out of 2560 x 1600 on my 30 external: monitor Dell, any help?

  Your video card does support this high resolution? If Yes, you have the latest drivers for it?

  Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• cartridges won't come out, says paper jam, how to get out of cartridges without killing printer.?

  cartridges aren't coming out,

  says paper jam, no paper in the printer,

  How to get out the cartridges without killing printer.?

  I did the thing video together 3 times and still won't come out? I'll call hp remote and hope they can fix it thank you

• problems with the HP Photosmart Plus b210a Wireless

  Good evening. I have some problems with the HP Photosmart Plus b210a. Precisely after printing when the printer is not detected on the network and is defined as "not available". The works remain in the queue and the printer is turned on and on again unable to work in print queue.
  The printer on the network report says "Success" for each element

  It is the same for the iPhone 4 and iPad 2

  The system is composed of:

  MacBook Pro 13 "with OSX 10.6 update now
  Connected to the Internet router Wavewgate Digicom3G150 with key
  HP Photosmart B210 Pro Aio series with ultimate drivers Apple

  Network:
  D4 HW (MAC) address: 85...
  192 168 123 102 (non-static) IP address
  DHCP configuration
  Authentication: WPA - PSK
  Encryption: Auto (AES / TKIP)

  The same system also use a PC with Windows Seven Home, but in this case, the printer works PERFECTLY! Even with the iPhone and iPad!

  Thank you for the help that you can give me

  OK, I will assume that the connection of the printer to the router and the router are OK for 3 other devices work correctly.

  Make sure that your OS X is healthy:

  1. download and install OS X Combo Update.
  2. download and install the printer drivers HP from Apple.

  After that, you can reset the printing system once more.

• Photosmart Plus B210a will not print on the Windows XP computer, but works on the Windows 7 computer

  I just got a Photosmart Plus B210a printer. I was able to install it using the wireless for my Dell Dimension 3000 3 GHz computer with Windows XP 32-bit SP3. He will answer analysis, but it will NOT print, it doesn't matter what I do. I have a Netgear wireless router. I tried the Dell connected directly to the router using a USB of Netgear WG111v3 USB adapter and cable. No impression whatever the configuration.

  On the other hand, I was able to make the printer work with an Athlon II X 4 630 with Windows 7 Professional 64 bit AMD machine. Everything works independently to know if the machine is connected directly to the router Netgear or using the above USB adapter.

  How can I make work B210a with my Dell with Windows XP? Is this a problem XP because Windows 7 has worked perfectly, but Windows XP would only scan.

  Subsequently, I deleted all initially loaded B201a software. At the printer detects the network, then reloaded the software from the CD. The printer then worked fine. What a relief. Perhaps the problem I had previously was linked to my trying to use the USB port when the printer originally did not work.

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• HP Photosmart Plus B210a unable to scale print?

  Photosmart Plus AIO, produced no CN216B, don't model no B210a, running Windows 7 x 64.

  Cumulatively, I spent several hours looking for a way to print scale, usually of pages web I'm holding onto one sheet of paper is ridiculous.

  Tempting, I found a retailer site we HP listed specifications for prints of this printer, including the ability to evolve between 1200-12%. However, I have yet to figure out where and how this can be achieved. Is it really impossible to simply 'fit to page '?

  Please, please, will be one of you, experts put me out of my misery once and for all on this issue? Thank you guys.

  For this printer itself, it doesn't have the function prints nationwide. However, there are applications (like Adobe) that can offer this option through their software. But is not included in the drivers for this printer.

• HP TM2 TouchSmart Tablet battery not inserted right, now won't come out? Help

  Removed the battery, when I put stuck back, he won't at the moment can not remove it again. The trigger of the slide is stuck in a position to release battery but the dough will not come out.  It feeds the tm2 but not out of what can do?

  I had this happen once and a thin knife blade to gently the battery slowly along the edge and pushing the battery until it has published. It will scar the plastic if you do not work slowly & carefully.

• Portege M780 - 10 H: stylus won't come out

  My pen is physically stuck in its Bay.
  It's supposed to flow when you push it.

  However when you push (it always moves) then it will not come out.
  I couldn't get him out of the battery bay either.

  Any ideas?
  Thank you

  Hmm maybe the spring inside the Bay where the stylus does not work correctly maybe you can use some tools like pair of pliers tweezers in order to eliminate this Bay pen