Assessment of Windows and the deployment (ADK) for Windows Server 2012 Kit

Similar Questions

• Has conducted an assessment of WEI, and, the window according to the analysis is complete, but progress seems to be about 95% and wrote "this may take a few minutes. Your screen may blink during the process.

  Original title: WEI

  I recently did a full scan of the system with all the tools available and used windows manufacturer to scan the hard drive, HARD drive program. Everything is cleaned up and updated. I conducted an assessment of WEI, and the window said the analysis is complete, but advances seem to be about 95% and wrote "this could take a few minutes. Your screen may blink during the process. "It was about 20 minutes so far and the box on the bottom, said"Cancel ". I'm going to be it, but ask yourself what can be the issue. Any help/ideas would be appreciated.

  Yes, I think that he / she forgot to mail the scanner :)

  The link I posted has a Mr. fixit for me on this matter use you it?

  You can scan with mbam free :/

  https://www.Malwarebytes.org/antimalware/

• What is the forest and the minimum area required for cloning a domain controller in Windows Server 2012?

  Please let me know the level minimum forest and domain functional, required for the RODC cloning Windows Server 2012...

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to update the model of RDS for Windows Server 2012 collection?

  Hi team,

  I want to know how to update the collection of RDS model (model master sysprep) which is used to create the collection?

  I tried the below way but did not get the update of the collection of virtual machines.

  -Start the image of mater of sysprep

  -install the required components

  -resysprep the image and stop it

  -East went to the RDS Collection and added new virtual machines in collection (removed the old his)

  Once created, I opened a session in the machines, but I don't see the updates (I installed some software in the sysprep image however and no is not there in the virtual machines in the pool)

  Can someone let me know if I need to create a whole collection again or the way I do it is a proper way? If it's a good way what could be the reason why I get the new installed software model sysprep image in virtual machines created in the pool, based on the model?

  How do we actually updated for security and other regular patches updated in virtual machines? In my view, we use the same approach?

  Any suggestions will be appreciated.

  Kind regards

  original title: Windows Server 2012 RDS - model Sysprep update process and collection of creation

  Hi MS Expert 2010,

   

   

  I wish that you post your question in the TechNet Forums as it is addressed to an audience of it professionals.

   

  Check out the link-

   

   

  TechNet Forums

   

  Hope this helps!

   

• Question: How can I format Ubuntu 10.10 on my machine for the installation of Windows Server 2012

  My machine is installed with Ubuntu 10.10 and together as a web server for a few months.

  Now, I need to totally remove the Ubuntu and install the large Windows Server 2012 RC.

  Easy steps?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• WAAS for RADIUS and Windows Server 2012 NPS server configuration

  I have trouble getting our WAAS to authenticate devices and connection via RADIUS.  Running NPS on Windows Server 2012.  Confirmed that my device WAAS can ping the IP address of the RADIUS server.  Using the attribute Type of administrative service under network policies.  Look in the event viewer, I get an error with event ID 15, "a malformed RADIUS message has been received of the xxxx-WAAS-01 customer. The data is the RADIUS message. »

  Right now, I can connect with only the local default user and password name.  Here are a few config for WAAS, running version 6.2.1:

  RADIUS server key *.
  Server RADIUS auth-host 10.194.10.13 port 1645
  !
  connection of local authentication enable secondary
  enable login authentication RADIUS primary
  local authentication configuration enable secondary
  Service radius Authentication configuration Select primary
  failover of authentication server unavailable

  I confirmed that my shared key is entered correctly on the WAAS and the NPS.  I have the switches/routers Cisco works well on the same RADIUS server.

  Someone had a bit of luck plug their WAAS to RADIUS devices using Windows Server 2012 and NPS?  If so, please share additional measures you have taken to get things to work.

  Hi Paul,.

  Based on the RADIUS error you probably experience failure CSCva14731. This was discovered with Cisco ACS, but can affect other RADIUS servers.

  To confirm, you can check the corresponding error in syslog WAAS:

  authenticate: % WAAS-UNKNOWN-3-899999: pam_radius_auth: talk_radius: RADIUS server did not respond (timeout 5 (sec))

  Also, this defect would not affect peripheral on software 5.x WAAS.

  The problem will be solved in 6.2.3 to come free.

• How to install windows server 2012 and windows 7 or 8 on the same computer

  Hi, I want to install windows 7 or 8 and on the same computer that I want to install windows server 2012 or 2008 I have not decide which one to buy again, and my question is, at the time where there was windows xp and windows me (x 9) for example, you must install first as millennial basic then install xp on another partition in my case I want to know is - it possible to do it without the virtual machine, and if this is the case, which windows must be installed first as the basis...

  Thanks a lot for taking time reading this, looking forward to your reply...

  You will need to ensure that the old version of Windows is installed first of all, in this case (Windows 7), then you can install Windows 8 or Windows Server 2012 after on logical partitions. Please see the following:

  See the following for how to dual boot Windows 7 and Windows 8 (the same principles can also apply to Windows 7 and Windows Server 2012)

  How dual boot Windows Vista/7 and Windows 8

  If you plan to have all three installed, make sure that configure you partitions in advance with ample space for all three.

  See:

  http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

• Deploying Windows server 2012 disappeared in the menu?

  Hi all

  IM have a dell Poweregde T620 server and see a windows server 2012 in the deplyoment of bone under Lifecycle control. IM did a full reset and update all the firemware to the latest version (Lifecylce, firmware, Bios, DriverOsPack, diagnostic uefi H310, dell remote access) and now im do not see the windows server 2012 in the Menu. IM see the new redht 6.3 (previously are 6.2).

  no idea why and how to fix it?

  Thanks in advance.

  Hello euphoria_2012

  It seems that 2012 server has been intentionally removed the OS driver pack in the latest revision. This is a quote from the download page:

  Important information (download page)

  If WS 2012 operating system is necessary, please use System Build and Update Utility for installation.

  I suggest to use the SBUU as recommended, or you can try to install the older driver pack.

  Thank you

• Partitioning hard drive, I want to spend 30/40 GB drive and the remaining space for the creation of other partitions.

  I created a recovery disc for my system that I bought the new laptop.
  It consist of 500 GB HARD drive, now the problem is the C - drive which is my WIN7 Home Basic installed occupies 400 GB of space and the D-drive has only 25 GB.
  My problem is I want to partition the drive C so that the other player must occupy the space according to my condition.
  But here its only gives me half the space to shrink.
  I mean, when I opened diskmgmt to shrink, C this is 200 GB disk space allotted to me.
  Medium I can use this space to create other partitions, but what I want is, I want to spend 30/40 GB C drive and the remaining space for the creation of other partitions.
  Help, please... Thnks...

  That's what we tried to tell you. An OEM installation does not lend itself to change and having to clear guarantees for re-setup means that you must be quite certain that you have other reliable ways to re-setup.

  If you want to dabble with Linux or dual boot, you should buy a complete commercial edition of Windows 7 that will give you more flexibility and accept that for drivers etc, you're on your own...

• Cloud management authority seizes not password provided by Cloudstack after the deployment of Windows Server 2012 R2 Datacenter Edition on a virtual machine

  I want to use Windows Server 2012 R2 on a virtual machine. When I start the machine virtual first time, Manager of cloud instance that is installed on the operating system intercepts not created by Cloudstack password. When I reset the password, and then he grabs this new password and I can access VM.

  That's the problem with compatibility with WIndows Server R2 2012 nursery cloud instance? Because the same version of it works well with WIndows Server 2008 R2 VM.

  Hello

  Republish the question to the Forum on TechNet.  These professionals are better able to help you.

  System Center Virtual Machine Manager 2012: improve the private cloud

  http://TechNet.Microsoft.com/en-us/magazine/jj819418.aspx

• What is the best compatible microSD and the maximum capacity for a Tablet android Iconia 10 One?

  Could someone tell me what is the best compatible microSD and the maximum capacity for a Tablet android Iconia 10 One?

  Two possibilities: perhaps the message is that your actual RAM is low, which means that you are trying to run applications too at the same time. Closing some should help a lot. The other is more likely, and that is the internal memory which is running low. There is a lot that can be done to help that, but it is especially dependent on what is causing the space to fill. If this is a case of too many installed applications (when applications are installed by default, they are going to the internal storage, the SD card is generally used only for data), one or more of the app that fills with things very with log files or personal always data in memory instead of on the DD of the.

  Check first for the last. Make sure that your photos, videos and music are all on the SD card. If you find tham in the internal memory, move them. Make sure you say the applications that use where is the new location.

  Then find the application specific data when it shouldn't be. Many file managers will do for you, you are looking for by flying over or logfiles extra-large. Parameters; Applications; Application Manager (or similar, names depend a bit on OS version) should allow you to look at each application data and cache. Those compensation where appropriate will free up the space.

  Finally, look at the applications that you have downloaded. Are there any that you do not use? If so, uninstall them. Note that the system and preloaded apps in general cannot be uninstalled, but you can often remove updates and then disable them in order to free some space.

  Storage on a device Android always tends toward the back of his head and gets the older unit the problem seems to be. If I were a type of plot I would suggest that Google is encouraged to keep buying us new machines every two years... None.

• Is there a Windows Server 2012 as an operating system option, somewhere in the options for t420?

  I just got my PowerEdge t420, it's my first tower, in fact my first 'real' server other server like before I just used an old pc to run all my necessary tasks in the network.

  I discovered a few minutes ago that I should install the operating system through F10 (lifecycle controller), so I timed "deploy the operating system", but I can't find a "Microsoft Windows Server 2012", I should then click on "any other operating system" or I do something wrong? I know that it supports MW Server 2012 I had an option to buy a 2012 OS Server pre-installed, but I decided to get clean so I can learn basic on how to start up, but I can't find the option.

  Appreciate the response

  In fact, without going into the details, the 2012 option has been removed from the LC with latest driver (v7.2.0) packs, it will be added at the beginning of April with the 7.2.1 version packs driver OS (not SUU)

• I got a new macbook pro and I want to spend my Adobe Creative Suite: Production Premium programs on it. I have no more the installation disc. I have my product code and the serial number for the facilities so. How can I do?

  I got a new macbook pro and I want to spend my Adobe Creative Suite: Production Premium programs on it. I have no more the installation disc. I have my product code and the serial number for the facilities so. How can I do?

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• For now I use PSE 8 and the adobe bridge for classification, stars, keywords can I keep all my work on the bridge if I change to PSE14 and the Organizer?

  Hello

  For now I use PSE 8 and the adobe bridge for classification, the stars, the keywords

  can I keep all my work on the bridge if I change to PSE14 and the Organizer?

  Thank you

  Exit the bridge and try to revive all by pressing the three keys Cmd + Shift + Optn (Cmd + Shift + alt)

  Choose to re - set prefs.