assign a contract to a group

Similar Questions

• Cancel the assignment of users to a group of IOM using the API/Java Code

  Hello OIMers,
  
  Can you please tell me how can I delete the assignment a belonging to a group through code?
  
  This is the case:
  
  When the user is deleted from Active Directory, I want to cancel the user from a group, assumes that the name of the group is "employed full-time."
  
  Currently how do is click the profile in the administration Console, then select group of drop down and then select Cancel this group assignment.
  
  Please tell me how to do the above tasks programmatically, it would solve my problem.
  
  
  Thanks to all in advance.
  
  Kind regards
  
  VSN

  Have you tried findGroups?

  You get a result set with only one entry and then just do a:

  long groupKey = groups.getLongValue("Groups.Key");

  Hope this helps
  -Martin

• ACS 5.2 assignment of authorization with nested groups in LDAP

  I have a Cisco Secure ACS 5.2 on a virtual machine. We use it for administrative access to our equipment Cisco GANYMEDE +. I use LDAP to authenticate with acitive directory. I currently run when a user is directly in the group that is assigned.  I change the way in which assign us group permissions and have created nested groups.

  For example:

  -User1 is a member of group1

  g -roup1 is a member of the "Group 2".

  I have card group2 to have access to my devices. However, User1 is not get mapped to the Group of law and access is denied.

  When I go to the monitoring, reporting and authentication GANYMEDE + details, under other attributes where it shows the outside groups the user is a member, I don't see group2, only group1.

  However when User1 is a member of group2 directly, the user is able to log on.

  GBA 5.2 not does support permissions allow this how to use nested groups?

  Mapping of nested groups is not supported by LDAP (because users containing that attribute memberOf groups just above them, are not nested). It is a behavior deafult when we use nested with LDAP groups. You must add subgroups for GBA and both respective authorization rules.

  Kind regards

  Jousset

  The rate of useful messages-

• Impossible to assign templates to the TMSPE groups.

  We run TMSPE on TMS v. 13.2.1. After loading patterns on MSDS, I wanted to allocate these models to relevant groups.

  I click on the "assign Templates" to bottom of the 'Model configuration' pane, him "assign templates" dialog box appears, but does not as it should be, after 10 seconds the dialog box disappears, leaving the grayed out users page.

  Is that what I missed, or is it a fault which must be connected to the TAC?

  Hi Paul,.

  You can take a look at the TMSPE diagnostics page in TMS (administrative tools > Provisioning Extension Diagnostics) and see if all the Status' are green? Also try to make the cleaning of all services?

  You can also take a look in the database TMSPE (with SQL Management Studio) and check that the models are really in this database.

  It could also be a browser problem (I saw a few problems with IE before), so try a different browser as well.

  If we can still define models after these checks (and a restart of the server TMS as well), so I recommend you to prosecute with TAC.

  Hope this helps,

  Arne

• Assign a ThinApps to user groups

  Hello

  I hope someone can help, I have a small question.

  You can assign thinapps by groups of users defined in Active Directory? At the moment we are allocation in pool or individual users according to their needs. I ask because we encountered a situation where a user has lost their vdi desktop and are to be given a new one with a completely different name, unfortunutely they lose some thinapp is assigned to them, unless he has received pool because it is received on the desktop and not a specific user.

  Kind regards
  Ross

  Create groups of application security in your ad.  Example:

  ThinApp_AdobeReader

  ThinApp_Office2010

  Create security groups and when you create the package you add groups when you are prompted for specific groups who can access this program.  Assign groups or users to security groups of applications that want to use it.  You can then use repository view ThinApp (as you do now) and he attributes the package to a pool but only people in the security group can actually run it.  Another way to do is run a script using ThinReg.exe and it will look at the security group and provide access to the program if the user is in the appropriate application security group.  It will also record requests for the correct files on the virtual desktop.

  Example script:

  Set WSHShell = WScript.CreateObject ("WScript.Shell")

  WSHShell.Exec ("/ q""%logonserver%\netlogon\thinreg.exe" "" "\\servername\thinapp repo\ * .exe" "")

• average of k: how to find the data clustred; : or how to assign number t0 each data group

  Hi Member

  I have download the LabVIEW Machine https://decibel.ni.com/content/docs/DOC-19328 learning package

  I want to run the K average algorithm to group the image in a group of two or three or more

  the problem is how to find the result I mean the image of clustred', the image that contain 2 or three threatened value only

  or how aasign a 1 value for all the intesity who

  belong to the cluster a and 255 for data that belongs to group 2

  for the look of the image as binary image?

  a my vi below

  Best regards

  my post before shows how to set the threshold manually using the slider of the graph.

  Here is the version k-means automated help .vi box tools

  

  

  Alex

• assign a user to multiple groups?

  Hello world
  Suppose we have about 500 groups, and we want to add a user to all the groups of this 500 at a time. How can do us?
  (Note: I know adding sequentially in each group, but I want to add all the groups at once)

  Soon, Amith, my bad - my link is to the variable USER, same process for the GROUP through blocks init etc etc.

• WebVPN/RADIUS - assign to the Group - Concentrator3005

  Client configuration of a Cisco Concentrator3005 using IPSEC on PC and who authenticate via radius w / ranking in a group is a breeze - more I'm not configure an individual user - and won't.

  But I'm banging my head trying to configure Webvpn to authenticate via radius and assign the user to a group.  The default user is always itself to the core group.  I want to find a way to create a user in a group.

  Everyone dealing with this before?

  THX.

  Robert

  Robert,

  First of all, you must make sure that the Radius Server is your first authentication method configured on the VPN3000, WEBVPN reads the list of servers for authentication from top to bottom and the first on the list is to be chosen, second to assign the user to a group, you must set up the value of the class on your radius server, this value must be equal to the webvpn group you must assign to the user.

• contracts and extend layer groups

  Good morning, good night to all. I have a question that I couldn't yet solve. Can we contract and expand groups to layers in Photoshop through extendscript code?

  Hola, buenas noches a todos. Tengo una pregunta Québec no he could aun did. SE pueden getting y grupos Extender of capas en Photoshop mediante extendscript code?

  Hello

  See the texts of buliarca tools of BCM and search for "BCM08 > ToggleOpen_CloseGroup...» »

  Concerning

  Davide Barranca

  ---

  www.davidebarranca.com

  www.cs-extensions.com

• New-VM and assigning groups of ports

  Howdy,

  In my view, that there is a syntax problem.  Need some review and help please.

  Written by a NEW - VM deployment script.  The script is what prompts the end user for details custom that is needed to create the virtual machine. How to change a Script Cust in custom Script Manager to deploy the virtual model computer.  Everything goes perfectly well except assign it to the Port Group.

  According to this link: New-VM - vSphere PowerCLI cmdlets reference the parameter is - NetworkName.  In PowerGUI, I get an error.

  Here's the script:

  # Connect to vCenter Server

  SE connect-VIServer $vcserver

  Get-OSCustomizationSpec TestScript1 | Get-OSCustomizationNicMapping | `

  Game-OSCustomizationNicMapping - UseStaticIP - $IP IpAddress IpMode '

  -$SM DefaultGateway - $GW - Dns 1.2.3.4,1.2.3.5 subnet mask

  New-VM-name $Name - model TemplateNameHere - VMHost $VMHOST '

  -Store data $Datastore - networkname "VLAN # ' OSCustomizationSpec - TestScript1 '

  -Confirm: $false - RunAsync

  Setting - NetworkName with channel hardcoded group name or with a variable gives the same result.

  Here is the error I get in PowerGUI:

  New-VM: all parameters can be resolved by using the specified named parameters.

  C:\Scripts\Massive deploy Project\testdeploy1.ps1:23 char: 5

  + New-VM-name $Name - model TemplateNameHere - VMHost $VMHOST '

  +     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: InvalidArgument: (:)) [new-VM], ParameterBindingException)

  + FullyQualifiedErrorId: AmbiguousParameterSet, VMware.VimAutomation.ViCore.Cmdlets.C

  ommands. NewVM

  Thank you

  BostonTechGuy

  You are the key parameters of different parametersets mixture.

  In this case, you use the model parameterset, and in this case, you cannot use the NetworkName parameter.

  Set the NetworkName later once the virtual machine is created with the cmdlet Set-NIC

• Associated with the process task assignment to the Group

  Hello
  
  I have a RO: for example. Laptop
  
  Process definition for this task and the process of definition, I added a process task create user...
  
  and I'm asigning this task to a group.
  
  But this approval request goes to xelsysadm instead of Member of the group.
  
  Why is it so?

  I think you are confused between the approval process and procurement process.

  You must assign the task to the group necessary for the approval process.
  Once your application for approval is xelsysadm I guess you have the standard approval process.
  Entrust State standard to your group and the approval will go to your group.

  Hope this helps,
  Sagar

• Oracle project contracts

  I want to know about Oracle project contracts - which in fact does.
  In the Oracle 120okeug & 120okeig documents, it is written that the characteristics of the Oracle project contract are:
  
  • Creation of all types of contract documents.
  • Contract administration focused on the workflow, including the control of the State, hold and change management.
  • Global contract Finance.
  • Monitoring of deliverables, integrated with ERP functions such as planning, production and purchasing.
  • Recognition of the costs, billing and contract income.
  • Role-based access security.
  • Contract flowdown.
  
  But in these documents, it is not given details on the above points.
  Also, I would like to know if we can scan and attach all related documents projects in Oracle project contracts for each project as a system of electronic document management.
  
  Concerning
  Hawker

  Hello

  The project contract is the agreement between you and your customers. When you enter a new contract, you need to connect to an existing project, you have whole eralier upward in Oracle projects. You would see on the homepage of the contract header. Note, the system allows you to enter several different contracts for the same project. So, it is nto always a relationship between a contract and a project.

  The region on the left allow you to search contracts that you already entered in the system. You can consult the contracts of groups, organization, product and program. The system adds a new contract at the appropriate grouping based on the program, have the Organization and the program that you have assigned to the contract, on the homepage of the contract header. Groups are defined in a separate form, where you can assign individual contracts to groups based on your logic trade won. Personal shortcuts allow the user to enter their own search criteria and save it, so in the futute, find contracts that respond to this logic.

  Point master Org is the name of an organization of inventory, which is considered to be the master of your company. The main organization is the Organization of the inventory where you can configure and enter their attributes, which will be shared by other organizations of the inventory in the society. In this organization, you can configure the list of purchable items, items that can be inventorized or items that you build in your business. Later when you go and author of contract lines, you can enter the item that should be delivered to the customer or purchased from a vendor.

  Oracle project contracts, you can bind the attachments to a contract. You can configure different types of attachments. Each pdf file that has been analyzed can be loaded as an attachment. You can assign the name of the document and its category.

  Dina

• List/edit virtual desktop groups

  Is there a way to "publish" individual virtual machines to the user? For example, I have a group of funds of 20 virtual desktops, and I would like the four people to see all virtual machines while using AppPortal or WebAccess. The purpose of this is that these four people would test new technologies commonly then they would be able to choose who they want to connect office. In the event that another user is already using the office, the error would pop-up. This particular case would promote the vWorkspace as our VDI solution.

  Hi, it is not possible to publish jobs specific, so that a user could choose to connect to-you are only able to publish applications for the entire group of office. You can, however, always assign a user or a group to a specific VDI so they always have the same computer each time. To clarify, the computers in this group all have different applications installed, and this is the reason for which you want users to be able to select the specific office? Thanks Mike

• Cannot change the host associations groups

  Hello:

  I'll put up a cluster with two nodes with two Dell servers and a MD3200 with two controllers. Each server has two SAS HBA, each one associated with each of the SAN controllers for redundancy.

  I stopped with a problem stupid aparently that not let me complete the Setup, and I need urgently finish it.

  The problem is that the 1 server is automatically asigned to the default group, and I tried to do a second group specifically for the cluster. I manually assign Server 2 to this group, but not way to assing server 1 also, so I'm trying to desassign server host cluster group 2, to assign it to the default group, but I can't find how. Now I have 1 server bound to the default host group and Server 2 in the clsuter group. All the options to manage, change or assign specific hosts or groups are disabled, and I can't configure the cluster.

  I think the problem is that access virtual disk (automatically generated by the software) is attributed to groups of two hosts, so I can't delete the second cluster group, if both servers are assigned, and the software doesn't let me do anything.

  Management software version is 10.84.G6.44 (latest version) and host is Windows Server 2012.

  Need urgent help. Thanks in advance.

  Finally solved reseting CLI configuration

• Several downloadable ACLs by ACS user group

  It is possible to map several downloadable ACLs to a single user or group of users use ASA and ACS?

  For example, you have an ACL controlling access to servers (ACL A) and another ACL (ACL B) internet access. Is it possible to assign several ACL to a group of users, such as user group can only access the servers, while the user group B can access servers and internet (ACL A + B ACL)?

  Thank you and best regards.

  George,

  The user and group settings only would allow you to select only a single instance of DACL list at once.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080a9eddc.shtml#configuringtheserverwitfddhias

  Kind regards

  Jousset

  The rate of useful messages-