Cannot change the host associations groups

Similar Questions

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.

• Cannot change the guest account group

  Long story short.  The guest account is somehow in the Administrators group.

  I use Windows Vista Home.

  When I am logged into the guest account and I look under the name he said administrator.  I'm going to change the type of account, it shows that it is in the standard group.  It won't let me even change for the management group.  It is in the Administrators group or what?  READ MORE that it gets better.

  When I'm on the command line and I type net user comments he says that membership in the local Administrators group.  Now, here's what I don't understand.  I do net localgroup guests comments / add and it will add to the guests group, and it is then in the customers and group administrators.  I can then do net localgroup guests comments/delete and it deletes it.  Now I CANNOT net localgroup administrators/delete comments because he says that it is not within the group, BUT if I net localgroup administrators comments / add that also says that he cannot do it because it's already in the Group?  That continues.  A I royally mess up something or it's a certain type of problem?  Please help me.  Thank you

  Hello

   

  Do the following and check.

   

  Check in the user management

  a. Click Start, type "Edit users and local groups.
  b. click on 'Users', which is located on the left side
  c. right-click Guest, and then select Properties.
  d. go to the Member tab, select the administrator group, and then click on remove.

   

  It will be useful.

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• UC540 cannot change the properties of Group of circuits ALL_FXO

  I'm setting up a UC540 with a 4-port FXO VIC, with 6 multi lines and a self-contained line.  I understand how to make outgoing calls all use the multi line would be to delete the stand-alone line of the trunk ALL_FXO group.

  Looking at

  http://sbkb.Cisco.com/CiscoSB/UKP.aspx?VW=1&docid=b7da053374e745cd80cf3c9b0c3b52a5_Troubleshooting_a_Scenario_Where_All_The_FXO_Ports_Are_In_Sa.XML&PID=2&respid=0&SNID=4&DISPID=0&cpage=search seems to give the right idea on how to draw a line or two, wowever, I do not have this button change step 2 available to... Add me it, change, removal of buttons are not there at all. What I really want to do is prevent the numbering of the ports 0/2/3 and 2/0/2.  Is there another way I can do this?

  Hello

  You should have these buttons available.  One thing to watch with CCA, is not being able to see the scroll bar on the right side.  Try to move the window in GRP, there is most likely a scroll bar that you don't see, and the necessary keys are falling over and you are simply unable to see without scrolling down.

  Thank you

  Darren

• Cannot change the host firewall configuration

  Hello

  I'm playing with a small lab environment and I see this problem.

  I have 1 vCenter Server Appliance and 2 ESXi hosts.

  The two hosts were 5.0 ESXi hypervisor (free version).

  I've done this.

  Replace licenses Ent +. Upgrade 1 hosts to version 5.1.

  Now, if I try to edit a firewall rule in the host improved from the vSphere client connected to the vCenter, I get this error.

  ' Call 'HostFirewallSystem.DisableRuleset' of object "firewallSystem-41"on vCenter Server 'localhost' failed."

  I tried to remove and time to host the vCenter but the error persists.

  Anyone know what is the problem here?

  Thanks in advance,

  elgreco81

  There are a few changes in the behavior of the firewall in 5.1...

  Try with this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2037544

• Logged in as admin. Cannot change the domain users group to the domain administrator

  My domain administrator is defined as a domain user and I want to change it to domain administrator. The groups gathered outside the account > users > Admin > groups section.

  Hello Tripline,

  Please provide number and firmware version of your ReadyNAS model.

  What's your ReadyNAS built-in AD? The ReadyNAS will simply copy the accounts of the ADS in your ad. Existing domain user, 'Administrator' should be adjusted to have administrator rights. I guess you should change everything first, and then integrate the NAS again to the AD.

  Kind regards

• You cannot change the file association for .exe owner program

  Just bought new Win 7 Dell desktop running Home premium OS from an old XP computer file transfer.  I am a developer of s/w using a proprietary application that compiles the files of .xpa.  Using 'open with' when I try to associate the file .xpa at our request, it does not.  Instead:

  1. the request does not appear in the list of programs to associate even if it has an .exe file extension

  2. when I click on the .xpa file that I want to associate with the application, it is to be associated with a Windows Media file

  Don't know what to do.

  Thanks for any help.

  Hello

  The question you have posted is better suited for the MSDN forums. For help, please contact their help support team.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  It will be useful.

• Cannot change the Vista hosts file

  I started Notepad as administrator and open my hosts file, made my changes, but when I try to save it I get this message: cannot create the c:\windows\system32\drivers\etc\hosts file verify that the path and the name are correct

  How to save this file? Thanks for any help!

  Hello

  The host files are linked to the internet explore and this is why it must be very careful when you change them. And this is the reason why they were safe as to change. We have a FixIT tool to assign default host files. It's here.
  http://support.Microsoft.com/kb/972034 also, here is the article that explains how to change the host files and the Lmhosts file in Windows Vista and Windows 7. You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/923947

   

  I hope this information helps you!

• You cannot change the configuration of the host

  I have stop my vm which is on san emc readers and he zoned for a second esx server.

  When I scan I can see the disks but I do not see a data store. then I try to add storage, signature of Dungeon and he tells me "cannot change the host configuration.

  (1) what I do 2) I tried vmotion and it did not work

  What is happening in vCenter, correct?  I had this happen in beta.  Connect to your ESXi host and then 'add a storage '.

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You cannot change the administrator account

  Original title: sdasdasdas

  I ca't change on my computer, my OS is windows 7 when I try to change administrator, it asks for a password when I put my password it say "" connection failed: the user did not request type of login on this computer "for this reason I'm stock on my user account and I can not install all the tools" because he has an administrator privileges. pls help me. ?

  Hello

  It seems that you cannot change the administrator.

  Perform the steps mentioned below and see if it helps.

  a: Click Start and type gpedit.msc in the Start Search area and press on Enter.

  b: Navigate to the following location
  Computer configuration / Windows Settings / Security Settings / Local political

  c: Under this click user rights assignment.

  d: Double-click access this computer from the network and verify that EVERYONE is added to the list.

  e: Otherwise add it by clicking Add a user or group , and then type EVERYONE, click OK and then apply and OK.

  Hope this information helps.

• Cannot change the default mode in wscript

  In Windows 7, when I try to change the default mode of wscript, I get an error message. When I get home

  CScript //H:CScript

  the command line, I get

  CScript error: cannot change the default script host

  What should I do?

  Open command prompt w / administrative permissions (right click, run as administrator), and then run the command:
  cscript //h:cscript //s //nologo

• ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  Hi all

  I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

  
  

  ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  
  

  Thanks in advance!

  Krishna

  Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.

• Cannot change the power state of VM: internal error

  Hello

  I freshly installed OS elementary which is based on Ubuntu.

  VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

  Cannot change the power state of VM: internal error

  I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

  Here is my log file

  Thanks a lot for your help

  PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

  Hello

  Welcome to the VMware community forums.

  I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

  If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

  vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
  

  If you then put the bug number into google, you get:

  http://KB.VMware.com/kb/1227

  Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

  Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

  The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

  --

  Wil

• Moved from VM with Snap Shots, doesn't start: cannot change the power state of VM: internal error

  Hello

  Last week, I decided to move from a Windows host based Linux system. So I went through my VMs their power off and copied to another drive. I then installed 7 Centos and reinstalled VMWare Workstation 12 re-imported the virtual machine in VMWare and I tried to start.

  I received the following message...

  "Cannot change the power state of VM: internal error.

  Suspicious, I looked at the folder that contains the machine virtual and noticed it contained snapshots. DOH!

  I guess it is pretty bad, not sure where to start?

  Any help would be appreciated.

  Thank you

  James

  I copied VM, with and without clichés, without problems. Have a few running on OSX Fusion so

  The first thing I would check would be for folders and .lck files. If so, remove them.

  Lou