Assign the 'Blocked' base - layer State

Similar Questions

• Base layer update question

  I have updated a base layer that exists to a 'major' version 2.0 and am trying to assign it to my test computer lab. When all computers receive my Base Layer 2.0, I'll be able to remove my Base Layer 1.0? I see they have the same identification number, so it seems that I am not able to. Once I update a base layer, I don't really want to have the old taking up space.

  Also, if I delete the files, for example a shortcut on the desktop or a folder that is not necessary, a layer of base (Base Layer 1.0) and update a layer of base with these gone files (Base Layer 2.0), and then apply this Base Layer 2.0 on a computer that already has the basic 1.0 layer applied am I correct that the files/folders are NOT deleted on this computer, but only the computers being base layer supplied with Base Layer 2.0 would be no deleted files?

  Thank you!

  If the files are there, they remain there after the updated base layer has been assigned. Of course, if the updated base layer is supplied to the computer, then it is completely updated.

• Assign dynamic statement declaring the block or block start

  Hi all
  
  For code below, if I attribute the select statement in the section declare for the corresponding variable, it will improve performance.
  
  For cust_veh_id we have another block cursor to declare, only partial code is provided.
  
  
  What I wanted to.
  

  declare
  v_addr_chg_stmt                 varchar2(2000) := 'select ''Y''
  FROM cust_addrs addrs
  WHERE customer_id = :v_customer_id
  AND updated_date >:p_end_date
  and rownum = 1';

  Actaul
  ---------
  

  declare
  p_end_date                      date;
  v_addr_chg_stmt                 varchar2(2000);
  v_mileage_stmt                 varchar2(2000);
  begin
  
  select updated_date into p_end_date
  from process_log_rfsh
  where tran_code ='CAP';
  
  v_addr_chg_stmt :=
  'select ''Y''
  FROM cust_addrs addrs
  WHERE customer_id = :v_customer_id
  AND updated_date >:p_end_date
  and rownum = 1'
  ;
  
  v_mileage_stmt :=
  'SELECT ''Y'' FROM cust_vehicles_audit
  WHERE cust_veh_id=:v_cust_veh_id
  AND field_name =''LAST_MILEAGE''
  AND added_date > :p_end_date
  and audit_date >= trunc(:p_end_date)
  and rownum=1'
  ;
         begin
                   execute immediate v_addr_chg_stmt
                      into v_addr_change_flag
                      using v_customer_id,  p_end_date;
               exception
            when no_data_found then
                   v_addr_change_flag:='N';
               end;
          begin
                 execute immediate v_mileage_stmt
                   into v_mileage_change_flag
                  using v_cust_veh_id,  p_end_date, p_end_date;
             exception
           when no_data_found then
                 v_mileage_change_flag:='N';
             end;
  end;

  Thank you
  Rambeau
  
  Published by: Raghu on January 18, 2013 13:13

  Rambeau wrote:
  This code is already running in production for a few years.

  Not a reason to justify using dynamic SQL.

  YOU NEED a JUSTIFICATION FOR the USE of DYNAMIC CODE. In any language.

  Once again: WHAT is your justification? If you can't provide that, so why you use code Dynamics?

  If you must use dynamic sql statements, performance definition wise to declare the block or start will be better.

  No difference - as no method doesn't change the actual SQL cursor run. Nor did the resulting cursor read faster data blocks.

  PL/SQL also does not care where the variable assignment happens. The difference is so small and so small, it is not relevant to the performance:

  SQL> declare
    2          t1      timestamp;
    3  begin
    4          --// test 1
    5          t1 := systimestamp;
    6          for i in 1..10000 loop
    7                  declare
    8                          num     number;
    9                  begin
   10                          num := 1;
   11                  end;
   12          end loop;
   13          dbms_output.put_line( 'Test 1. '||to_char(systimestamp-t1) );
   14
   15          --// test 2
   16          t1 := systimestamp;
   17          for i in 1..10000 loop
   18                  declare
   19                          num     number := 1;
   20                  begin
   21                          null;
   22                  end;
   23          end loop;
   24          dbms_output.put_line( 'Test 2. '||to_char(systimestamp-t1) );
   25
   26  end;
   27  /
  Test 1. +000000000 00:00:00.000040000
  Test 2. +000000000 00:00:00.000024000
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

• The assignment of value to the block multi-record in Oracle's 10 g

  Hi all

  I'm new to form of Oracle 10 g.

  I have a block of several recording that does not rely on the database. I need to assign the value to this block multi-record dynamically the ref cursor.

  I'm trying to set the value as below, but its does not work. Please help me on this.

  loop
       fetch cur Into screenval_rec ;
        exit when cur%notfound ;
        first_record;
     
    :BLOCK1.COL1:= screenval_rec.value1;
      :BLOCK1.COL2 := screenval_rec.value2;
      :BLOCK1.COL3:= screenval_rec.valu3;
    
       next_record;
  End loop;
  
  

  Kind regards

  REDA

  Hi Craig,.

  Thank you for your information.

  But I found the exact cause of this "Invalid cursor error' (ORA-01001) in Oracle forms. It is because of the unique enclosed in quotes the select statement of the REF cursor. I found in the paragraphs below Oracle.

  Note 170881.1 - ORA-1001 calling a stored procedure that contains a REF Cursor Oracle Forms

  Once I deleted the quotes, it's working properly now.

  Thanks again for your help.

  Kind regards

  REDA

• Sophos Safeguard & Mirage - base layer Assign has failed

  Hello

  I am trying to use Mirage 4.2.3 in an environment where Sophos Safeguard 6.00.0.115 is already installed. Cardiovascular diseases are already encrypted when the Mirage Client has been installed.
  I have a Base layer that was seized of a reference machine which is also encrypted with the same version of backup.
  Now when I try to assign the Base layer to CVD, I get an error.

  It is the newspaper of the funds:

  2013-10-28 12:13:40, 086 [8] INFO Wanova.Desktop.Shims.SophosSafeGuardShim Sophos SafeGuard detected.

  2013-10-28 12:13:40, 086 [8] INFO Wanova.Desktop.Shims.SophosSafeGuardShim Preserving Sophos SafeGuard key

  2013-10-28 12:13:40, 086 [8] DEBUG
  Wanova.Desktop.Shims.ValueCloner CloneSubtree
  sourceKeyPath = software\Utimaco\SafeGuard Enterprise,
  targetKeyPath is company MirageSoftware\Utimaco\SafeGuard.

  2013-10-28 12:13:40, 086 [8] DEBUG
  Wanova.Desktop.Shims.ValueCloner CloneSubtree
  sourceKeyPath = software\Utimaco\SGSSO,
  targetKeyPath = MirageSoftware\Utimaco\SGSSO.

  2013-10-28 12:13:40, 101 [8] ERROR
  Wanova.Desktop.Shims.SophosSafeGuardShim caught Exception, failing validation:
  System.NullReferenceException: Der Objektverweis wurde nicht auf eine
  Objektinstanz aufgefuhrt.

  EIB
  Wanova.Desktop.Service.RegistryMerger.Go)

  EIB
  Wanova.Desktop.Shims.ValueCloner.CloneSubtree (String sourceKeyPath, String
  targetKeyPath)

  EIB
  Wanova.Desktop.Shims.SophosSafeGuardShim.PreserveSophosKeys)

  EIB
  Wanova.Desktop.Shims.SophosSafeGuardShim.Go)

  2013-10-28 12:13:40, [398]
  [8] INFO
  Wanova.Desktop.Service.PreCommitReport error in pre - Commit Reporting:
  Procedure wegen Sophos SafeGuard-discrepancy fehlgeschlagen

  Migration mit nur auf dem base layer installiertem Sophos
  Backup will not supported

  I opened a SR, but in addition, I want to ask here in the community. Please help me if you know a solution.

  Thank you

  Stefan

  The last workaround is to create the following Reg Key to the Base Layer and the DSF to successfully deploy the Base Layer:

  HKEY_LOCAL_MACHINE\SOFTWARE\Utimaco\SGSSO

  Stefan

• 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

  Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
  I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
  I can't even go in safe mode, the same error messages appears.

  Hi James,

  You could try the Startup Repair to see if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Find each text block and the offset of the first base line game...

  Hello world

  I am currently working with InDesign CS2 files and I want to find all the blocks of text and change its first offset from base to the "height of the capitals. So I tried the below syntax and it says error. Please help me for this.

  Thanks in advance

  //==================

  #target InDesign4.0

  myFrame var = app.activeDocument.textFrame.everyItem ();

  for (var i = 0; i < myFrame.length; i ++) {}
  myFrame [i].textFramePreferences.firstBaselineOffset = 1296255087;
  }
  Alert ("DONE");

  //==================

  Concerning

  Indana

  var myFrame = app.activeDocument.textFrames.everyItem().getElements();
  
  for (var i=0; i		   

• How to block a select statement for a table of the specified until validation line

  Hello
  
  How to block a SELECT statement for a specified row in a table until willingness to engage occure?
  
  My procedure is part of a Stock request and if a user (X) get stock 1 piece, another user must wait for the user (Y) complete his reportoire.
  
  So, let say my stock have 10 pencils.
  
  When the X user starts the Stock_PLS procedure, in table Stock, line (e.g. R1) that user X should work with it, must be lock up to what the commit / rollback will appear.
  
  procedure Stock_PLS...
  
  Start
  ..
  pencils: pencils-1 =;
  ..
  End
  
  Observation-> pencils: = 9;
  
  
  This means that is a user there, run SELECT * stock of the table where rows_id = R1, SELECTION should wait the Stock_PLS started by user X will be completed (with commit or rollback) and his SELECT should return the value 9.
  
  What I need, is that Oracle has something like LINE EXCLUSIVE TABLE LOCK, but in my situation the SELECT statement should be denied on the specified lines, until the end of the procedure.
  
  Kind regards
  Michael

  Hello
  You can achieve this using the update with the Select clause.
  You can write your select statement like this
  SELECT * from stock of the table where rows_id = R1 for update;

• Value to automatically fill in the details on app_id block base

  Hi all

  I have 2 control data block in my forms, is a common first name in the block and the other a name is common_detail.

  In my common block, there is a column called app_id and value when the same user enter this value, the remaining elements for common block is filled...

  Note:-this app_id is also exist in my block of common_dtl.

  Now what I want to use this common block app_id to fill my block of common_dtl

  So I tried to create the join relationship in a common block but no luck.

  Now I wonder what I have to use cursor and a loop to fill common_dtl block or y at - it another way that I can use? Thank you

  ASA Amatu

  At Design time:

  ------------------

  1 create a control block in block Master, database property is set to Yes...

  2. create a no. areas related to the block of retail...

  3. in the retail block, u should have these control-related positions

  at each point of them, you have a copies the value of the item of property u indicate here the:MASTER_BLOCK. Nom_element

  4. repeat copy item value for each element of releated to the details.

  5.ENFIN, in the retail block, create A time-news-block-Instance Trigger

  RUN THE QUERY; -Built-in

  I did all your steps provided but I get the following error message.

  Error

  FRM-30445: use of the Item property include REF requires non-null Alias property.

  Block: HEARING_COMMON

  Form: APP_HEAR_RSLT

  FRM-30085: unable to adapt to the shape for the release.

• 2 blocks from the database data insert into the same base table?

  Hello
  I have the C_NEW canvas. On this canvas, elements of 3 blocks are usable by the user.
  
  1 block NEW_HEAD: 3 Articles say X 1, X 2, X 3
  2 block NEW: record multi say Y1 thru Y10 text fields. Also a scroll bar.
  3 block NEW_ACTION: 6 buttons say B1 to B6 (one of them is N_OK which matches the element in question)
  
  two NEW, NEW_HEAD blocks are blocks of db and have the same basic so-called BT table when users click on the N_OK (after filling the data in the NEW_HEAD and then NEW block in that order), I need the data between the two the NEW, NEW_HEAD to enter the BT. currently only the NEW data goes to BT. in the BT table fields that correspond to the fields X 1, X 2, X 3 in the NEW_HEAD remains null after clicking on the N_OK button. I put commit_form in the N_OK code, since the blocks are blocks of db (as suggested by the people, it is easier to issue a commit_form that a lot more work in writing my own SQL).
  
  How can I achieve this?
  
  Thank you
  Chiru

  There is therefore no N_LC_DMG_ALLOW column in the table, that the block is the result. You must set the property "Section of the database" not for all the elements that are not of the columns in your database table.

  And when an error occurs, then the full treatment stops, so its clear that there is no inserted record.

• Info of the CNS in the block header

  Hi guys,.
  
  Maybe someone can post a link or something (I couldn't find one) where there is a good description of the SNA in the data block header, things
  
  For example, [http://www.adp-gmbh.ch/ora/concepts/db_block.html | http://www.adp-gmbh.ch/ora/concepts/db_block.html] YVERT and the SNA sequence numbermentioned, but what is the difference between the two? And [http://www.informit.com/articles/article.aspx?p=20684 | http://www.informit.com/articles/article.aspx?p=20684] has a diagram that represents the header of a data block containing the Basic YVERT YVERT Wrap, Seq, SNA of latest cleanup, clerk YVERT of free credits space.
  
  I hope you see my point, it's quite confusing. Maybe one of you knows a good link which explains this kind of things well?
  
  Thank you.

  Oracleguy,
  Well that wouldn't be included in any document that has more than one free internet connection. Only Oracle support can get the clear picture on this subject. I'll try to tell you some info that I know. Hope that helps.
  CPN is of two types. One is called system commit number and one is called system change number. The number of system change is used for blocks and represnts the news when an obtained block modified and are also the oldest and the most recent changes that occur to the block. They are used to control changes in the flow of food by progression.
  System commit number is associated with the entire database. This is used to represent the State of consistency of the data with operations that are committed.
  Basis of SNA and Wrap are the numbers that keep incrementing of the SNA. The basis of the CNS is incremented for each SNA increment. When the base reaches a limit, it is incremented YVERT Wrap.
  This link shows the info about them in a clearer way.
  http://Sai-Oracle.blogspot.com/2006_03_01_archive.html

  Cleantout YVERT is the SNA that was there when the YVERT block drain plug happened.*Committed * is the RCS when the block got a validation.
  I don't know the last Credit of free space.
  Well, I found something for her,
  http://books.google.com/books?id=TuzniwcsNtUC&pg=PA392&lpg=PA392&dq=what+is+Committed+SCN+Free+Space+Credits+%2B+oracle&source=web&ots=oEyANU6rpb&sig=kqAlpB2YO6eJmrJp7Z7DzcsBdCA&hl=en&sa=X&oi=book_result&resnum=1&ct=result#PPA392,M1
  This represents the number of bytes stored for validation. I don't know what is the usefulness of this, but still, there is something that is better than nothing.
  What I told you is based on what little I know, but I don't think that there is any document on free sites that explains it clearly. On metalink too, this is not clearly explained. But I hope that you have at least an idea.
  This link of IXORA should also help.
  http://www.Ixora.com.au/notes/cache_header.htm
  HTH
  Aman...

  Published by: Aman... on November 30, 2008 18:15
  link added

  Published by: Aman... on November 30, 2008 18:24
  link added to FSC

• Yahoo gave me the block www site; now unable to use firefox on computer laptop win7

  looking for something on yahoo mail. announcement above asked me if I wanted to block - stupid me clicked on it. Now impossible to open what anyone with Firefox. Internet Ex and other work programs. Ran AVG and MBAM and hard reboot, not change. I can try to uninstall Firefox and reinstall but worried this virus can do additional damage to computer laptop may.

  Ideas? I'm in the middle of trying to sell the property out of State.

  You use the extensions (Firefox/tools > Modules > Extensions) that can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery)?

  If you then click on their icons in toolbar and search the blocked items.

• Structure of the event in a state machine

  Hi all

  I have a state machine with a sort of stand-by, where a user can select the next button state. I tried using a structure of the event with changing the values to select the next case, but when the state machine is in a specific case and the button of another State on the blocks of all things. I've attached an example, the lights simply stating that you are in the State.

  Thx for your time,

  Bert

  Edit: actually, I miss-clicked

  1. you have not need a while loop around the structure of your event.  With no wired time-out, you will never get a timeout event.

  2. your button events are set to 'Lock Front Panel until end of the event'.  Uncheck the box which.

• How to use the time of 80 MHz with the example of the soul base angular Position-buffer-Cont-Ext Clk.vi

  Hello:

  I use the card PCI-6602 and am a bit new to the use of timer/counters.  I use the Commission to measure the position of a quadrature encoder.

  I would use the time base internal 80 Mhz the map of 6602, but examples of LabVIEW will not allow that.  In the example, he States:

  2. call the DAQmx Schedule VI (sample clock) to configure settings of clock synchronization external sample Mode Sample and sample clock Source.  The sample clock Source will determine when a sample will be inserted into the buffer.  The 100 kHz, 20 MHz and 80 MHz time bases can serve as the sample clock Source.  The Edge parameter can be used to determine when a sample is taken.

  Is it possible to use the database internal time for my application?

  I have attached the example vi that I use.

  Thank you.

  Pat

  Hi, Pat.

  

  The rate determines how fast the samples are acquired and put on the material buffer.  This value depends on the basis of time, which is specified by the source of the VI DAQmx calendar entry.  The default source on the PCI-6602 map is the on-board clock (80 MHz).  The rate must be a divisor of the source.  For example, 80 MHz, 40 MHz, 20 MHz, 10 MHz,..., would be acceptable values for the entry rate.

  So the answer to your question would be to remove the entry from the source and ensure that the rate is a factor of the source.  Leaving this entry unwired will use the clock shipped by default of the unit, as shown in the screenshot below:

  

  I hope this helps.

  

• How can I change the scrolling on the block diagram?

  I'm trying to find a way to scroll from left to right with the mouse when you program in the block diagram.  I found that if I hold down the Ctrl key and scroll with the wheel of the mouse while on a case statement, it will travel cases.  With no pressure on the buttons from scrolling with the mouse wheel will allow me to scroll vertically, but how to scroll horizontally?  Thanks for the help.

  If there is then I do not know it.  I have a mouse with a scroll wheel that clicks on the left and right, but it does not work in LabVIEW.

  I just found out that if you hold down the ctrl and shift keys and click and drag on an empty spot you can drag the diagram block autour.  Which is somewhat scrollin