assignment of

Similar Questions

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• ringtone assignment

  had to get a new iphone 6 s and can not enter my iTunes ringtones to assign to contacts?   can u help?

  shandahon wrote:

  had to get a new iphone 6 s and can not enter my iTunes ringtones to assign to contacts?   can u help?

  Please provide details.

• You can assign output by ascending path to an existing project in the logic?

  Hi all

  Never really need to do until today

  Got a logic project (others 50 titles) I need to assign the output increasing outputs audio.

  Its the (only) thing that ProTools can do quite easily (cmd & option)...

  Is it possible to do in logic?

  Thanks in advance,

  Dan

  As I do this is to highlight all the tracks in the console window and then click on choose the output on the first track while holding the Option key.

• How to assign to the logic of distance in a separate in Logic Pro environment physical port entrance

  Is it possible to assign the logical KEYBOARD with a separate entrance in the port of entry of environmental Logic Pro physics?

  Thank you for your advice.

  I don't think so.  Logic of distance is considered to be a controller. Controller input data stream are made (by logic) before stopping the logic entry in physics. I "think" (I'm not an expert on remote logic) that the flow of midi is available on the port of the sum.

  I'm still not aware that you can change the channel of the South on the logic of distance. So it must be channel a (connected) and your other controllers must be able to have their midi outputs assign other channels if you demux their output.

  (please, correct me if this is not correct about the logic of distance - more conjecture on my part because I use remote logical not)

• Contacts - assign group on import

  When the Yahoo address book importing (exported as a CSV file) is it possible during import the corresponding field to assign the category (the label of Yahoo) as a group?

  The idea is to bring in a few thousand emails, who have 10 groups of different sizes.

  I know that I can a) affect the other field label or Notes and then later b) search maps for names of previous groups, c) select all and then d) create each group. I hope that I can eliminate these steps.

  You could probably do with some AppleScript, but otherwise I don't think.

  I think that the simplest solution would be to divide the file into groups and import each separately. When you import, they all appear in the last Smart import group. You can then create your new group and drag them all since the last import in the new group.

• Preview color management issue - glued assigned Adobe RGB image

  I often web elements page layout in InDesign that my composition tool, then copy and paste in Photoshop as a smart object to then generate optimized web images. It's just easier to use photoshop. Problem, it is in the latest versions of Adobe have clogged the engine of anti-aliasing and now when rasterising a PDF file or paste a picture also as a chip oppose any portion of the image of this asset is smoother. You don't really notice that if the image of origin placed in InDesign is say double or more this resolution of the web version of final product, the scale hides the issue. But if they are closer to really see faceting full size occurs. Long story... anyway, I decided to study the implementation overview of Apple as a gateway for the rasterising instead of photoshop. He did a good job on glued assets resampling, but on this point saving and checking in Photoshop, I note that Preview assigned Adobe RGB profile to the processed image. Even if I opened the InDesign PDF and export as image in my size. My color workflow is sRGB. InDesign and Photoshop are two parameters in this way, the image placed in InDesign also has sRGB profile, the PDF has sRGB profile. If I copy / paste between InDesign and Photoshop, they are both aware glued Trump space and warn me if different from that of the target document. I have no idea where Preview becomes Adobe RGB, I don't see its place in the app to change that as a preference, and in any case, it seems very strange to be a defect when most of the people would not use them.

  In the preview, click on the tools bar menu point and scroll to the bottom of the drop-down list to assign the profile

  the next submenu you can click on and select sRGB at the bottom of this list. To save this profile to your image,

  do a "save under" (click on file, press the option/alt key Save As should appear). You can also test under the view menu bar item.

  

• Is it possible to assign a different sound to my second e-mail account?

  I have two email accounts set up and works fine in Thunderbird. My main account, which I use for almost everything and a second account that I use for video surveillance and I was wondering if it was possible to assign a different sound to the second account.

  You can try this addon, it seems to be mixed results.
  Hard to know if it had fallen to not properly configure the user.
  I have not used it myself, but it must be worth a try.

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/mailbox-alert/

  How to install the Extension module:
  After you download addon extension *.xpi file to the downloads or desktop folder.

  In Thunderbird
  'Tools > "Add-ons"
  or
  'The menu icon ' > 'Add-ons'

  • Click the gear icon and select 'install module file.
  • Find the downloaded *.xpi file and click 'open '.
  • You have as much need to restart Thunderbird when you are prompted.

• While the iPhone overseas requires a reactivation, which sometimes works, but more often does not work. At the beginning he said that my SIM card was not supported by the activation policy assigned by the activation server.

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  kennypg wrote:

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  I think it's a problem with Verizon.

  Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.

• How can I get an identity to be assigned automatically to a message?

  Is it possible to get an identity specific to assign as a principal to a (outgoing) message automatically, dependant on the record where I am from enamel?

  I realize it's me, but I always forget to change identity in the drop-down list area.

  Thank you very much.

  John.

  What you describe, that's what's supposed to happen automatically. (Well, it is supposed to use the identity of the account that you are currently in.)

  There are a lot of Add-ons for this problem to a search for identity in the modules search tool.

  Some that I have used or tried:
  Correct Identity: https://addons.mozilla.org/en-us/thunderbird/addon/correct-identity/
  Accounts of file: https://addons.mozilla.org/en-US/thunderbird/addon/folder-account/?src=api might be close to what you are looking for

• Apple DEP - automatically assigns new devices

  as indicated in article https://help.apple.com/deployment/business/?lang=en-gb#/tes54ab8fff2, when you change a MDM server on deploy.apple.com, there should be an option to automatically select "assign new devices" - this seems however not that is the case I don't forget anything?

  Salling PB

  To after my experience with that of in your MDM solution. May be a typo?

• Is it possible to assign a sound e-mail 'coming out' to a PC using mozilla?

  I have a sound for notification of incoming e-mail. Is it possible to assign a sound when I send an email from a PC?

  Not that I know, but why would you want a. You have a sending dialog box before you until the mail is gone.

• Complicated assignment of importance?

  I would like to create a spreadsheet to track the importance of the issues to be addressed. I don't know how to get the result that I have in mind. That's what I'm doing:

  I have a spreadsheet with multiple rows and columns. Each line is 1 point, each column is another aspect of the question. What I would like is to be able to assign a unique number to all the elements that define its importance (when it should be handled).

  So, if there are 5 elements, I can assign a 5 point more urgent, 4 to each other online, etc. Then, by using 'top-down ranking', the most important points are automatically on top the lower elements.

  It's easy when there are a relatively small number of elements but the worksheet is more than 300 articles and will grow even more over time.

  I would like to have the numbers to take care of the following:

  1. When you add a new item, have the numbers assign it a unique 'number of importance', and have the previous elements adjust automatically to the new total number of items.

  for example (as in the previous example) if there are 5 Articles and I add a new item, the item which was previously a 5 becomes a 6, 4 becomes 3, etc and the new item is the new 1.

  2. increase and reduction of specific items in increments of 1 to be able to refine the levels of the importance of the issues in relation to the other.

  for example (continued from the previous example) if the (new) point 1 is more urgent than the 4 current but less urgent than the current 5, be able to expand to become the new point 4, while pushing down the previous 4 votes to 3, 3 votes to 2 and 2 to 1.

  2B. If the previous can be made in increments of 1, how can it be done in steps of 10, for example, or 100, when you want to blow chunks of elements?

  3 remove items after they have been caught in charge should change upper topics of importance to adapt to the new total amount of items.

  for example (as in the previous example) if item 4 is supported: 5 becomes 4, 5 and 6.

  4. If the sort items can also be automated to immediately push up / down change the elements according to their "important number", it would be the icing on the cake. (Removes the need of "top-down ranking" column "number of importance" after each new entry.)

  The "important number" must always be specific to a specific item, never have two points of the same importance.

  Ask for more details if you would like more information.

  Thank you for your time!

  Hi hpahaut,

  A complication to your request is that a cell can have a formula in it or an operator entered value, but not both. It seems to me that you must be able to the importance of rank and the newest is not always the most important. Here are the two reasons to be able to automate the process.

  Maybe it's not sexy, but you can watch your own values and keep the list sorted yourself. If you need to add a sixth question and you want between 4 and 3 assign 3.5. No room between 3.5 and 3.6? Then, 3.55.

  Quinn

• How scam assignment affects iPad and iPhone

  How scam assignment affects iPad and iPhone

  UH... What? Could you elaborate?

• to connect to a WiFi with assigned IP address?

  How do connect me to a WiFi with the IP address assigned? I configured my iPad Mini as a personal Hotspot, now I'm trying to connect to the internet using my MacBook/iPhone via WiFi network but it says the wifi network has an assigned IP address and cannot connect to internet!

  If you want to remove yourself public reactive and connect to the wi fi once more, please follow the steps:

  1. open system preferences > select network.

  2. click on the padlock and enter the user name & password.

  3. Select WiFi connected and click Advanced

  4. uncheck the box remember this network and click the sign minus.

  5. take the cursor to the menu bar top & select your network name, then click on apply and close the lock.

• While creating a slide show with pictures, can you assign music to a specific set of photos? I would use 5 different pieces of music for every 5 parts of my slide show.

  While creating a slide show with pictures, can you assign music to a specific set of photos? I would use 5 different pieces of music for every 5 parts of my slide show.

  

  No, you can't.  One solution is to create 5 different slideshows and export them to the office where you can bring together them in a single quicktime movie file and use it.

  If you have a copy of iMovie 6 HD, it can be hacked to work with El Capitan. With it you can assign exactly music groups of slides in the slide show: