to connect to a WiFi with assigned IP address?

Similar Questions

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• Unable to connect to particular wifi with particular system

  Hi I am facing problem in connecting to a home wifi device. I use hp laptop with xp installed.
  usually, I work with the WiFi only just today I changed the password for the wifi connection I not be able to join that device with my only i, laptop computer was able to connect with my ipad and mobile, and my laptop is able to connect to other wifi no problem devices.
  I tried to remove my all my wifi preferences and change the password to wifi devices.
  the error indicates is peripheral can no longer go well, I had full signal strength and I have all the other devices in the same place.

  What version (Home, Pro, Media Center) and service pack (none, 1, 2, 3) of XP installed?
  version pro service Pack2

  You should have installed Service Pack 3 a long time ago.

  When it came out first, Service Pack 2 for XP did NOT support WPA2 encryption.  That support was added by several updates and eventually was incorporated into SP3.  So... the first question is: when you have changed the password in the router configuration utility, have you also changed the encryption to WPA to WPA2?  In other words, have you ever been able to connect to this computer to a router using WPA2?

  There is no data in the open Notepad

  Do you mean that a file named ipinfo.txt is created on your desktop, but it was empty?

  Open a command prompt window and type
  ipconfig/all
  and then press ENTER.  You should see something like this:

  

  For your wireless connection, what are the values that show you:

  IP address:
  Default gateway:
  DHCP server:
  DNS servers:

• Cannot connect anything a WiFi with Cricket Crosswave 2725

  Original title: I need help with my cricket crosswave2725

  can't connect what either wifi

  At home

  Hi Rick,

   

  1. What is the full error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  I suggest you follow the links below and check the issue:

  Troubleshooting to wide band:

  http://www.mycricket.com/support/topic/broadband-troubleshooting

  Search frequently asked Questions:

  http://www.mycricket.com/support/search/support

   

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  For more information:

  Contact the Support of Cricket:

  http://www.mycricket.com/support

   

  I hope this helps.

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Compaq presario c700-c795tu: unable to connect to the WiFi network with WPA2 encryption

  Hi team,

  I tried all the options in your post and I am still unable to connect to WiFi with WPA2-PSK encryption.

  I am currently using the adapter network driver atheros 5007 wireless.

  Some of the links in your message that resolved this issue earlier are currently unavailable.

  It would be great if you could help me to solve this issue.

  Concerning

  Roger

  Here is the patch for WPA2 for XP SP2...

  Install and reboot and then see if you're OK...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

  That's the only reason why I can think that now prevents you from being able to connect on a network with WPA2 Personal Security.

• HP 2000: Problem connecting Wifi with HP 2000

  I have a laptop HP 2000 used recently. I was able to connect to my WiFi at home, but drop it and saying 'Limited connection' or 'no. Internet Connection. I have the latest drivers for my network cards.  Could it be caused by a faulty Wifi card? Could I get a replacement for the wifi card?

  Hello @cost63,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the WiFi problem and wanted to help you!  I understand that you can replace the WLAN Module.

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  HP - products customer support

  It is possible that the WLAN Module may be faulty.  If this is the case, according to the model of your laptop, the WLAN Module should be replaceable.  But first, we'll see if the problem is software partner.  Try to review these steps, proposed by members of the community

  @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Source: fixes Common for wireless connectivity problems.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• problem with the creation of my usb data card connect to a wifi hotspot network!

  Hello, I have g62005ax machine of hp pavilion and the use of windows 7 home basic service 1 since I bought it, I map of 3g data through which I use internet on my laptop, recently I had a phone android romaric mi3 and wanted to use the net to my data card 3 g on phone via my laptop by creating my cell phone as a wifi hotspot I tried connectify and virtual wifi router and mhotspot, enable me to create a hotspot wifi successfully, my phone can identify them and even be able to connect to the wifi network but I can not surf or download in the phone no matter what app or browser, phone says connected wifi network and phone receives the data as 0.15 0.58, 0.98 KB. My card data speeds work fine on pc on 1 MB/s with no problems, but what is wrong I am doing even after the connection is established?  As I said I tried different pc applications, given that my phone might have problem then I tried another star of the Galaxy samsund phone pro, it also connects to the wifi network but the same problem, IE. No surf, the so problem is not end of my phone, what am I doing wrong here?

  Hello IRON-MAN.

  Thanks for posting on the HP Forums!

  I understand the hotspot of data card USB that you create from your laptop is not working properly. I'll do what I can to help out you! Please follow this guide to make sure that you follow the correct procedures: How to create a WiFi HotSpot with your connection Internet/card USB Data...

  Please let me know your results. If you're still having problems, please provide some screen shots so I have something to look at. Thank you and have a great day!

  Mario

• I tried to connect wifi with my laptop, including wireless I use for a month now, but shows only 2 blue screens without the world down on the right, and he said "unidentified network".

  "Unidentified network".

  Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanks

  Go to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.

  Do not put a check in the box: remove the software driver for this device.

  Restart your computer and Windows will install your wireless network.

  If the problem persists, see if your computer manufacturer has an updated driver.

  These articles may help:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://support.Microsoft.com/kb/313242

• Connection Officejet 6100 to Wifi with the Mavericks

  I have Mac OS 10.9.2 (Mavericks) and have installed all available updates.  I just bought a HP Officejet 6100.  The configuration software supplied with the printer does not work on the Mavericks.  I can use the printer via USB, but have no idea how to do to connect the printer to my wifi network.  All the instructions I found point using the diskette supplied with the printer (not compatible with the Mavericks) or assume that I already connected the printer to my network wifi (which is the problem that I am trying to solve).

  I had HP products in the past and if it is connected to the network, but it supports WPS and has a touchscreen user interface.  This printer does not seem to be supported.  The wifi light just keeps blinking.

  I don't like on ePrint, etc..  I want just the printer connected to my wifi so I can print from any number of computers on this network.

  Help, please.

  Thank you

  It wasn't very nice, that we were just trying to help.  Don't tell you specifically that your router has WPS.

  On your printer, press and hold the button wireless for 3 seconds.  Within 2 minutes, press the the router WPS button.

  Wait about 2 minutes. If the printer connect successfully, the wireless light will stop blinking but stays on.

  From there, you can connect your printer on your Mac:

  -Go to System Preferences > print & Scan
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?

  So I just got my brand new HP ENVY spectrum XT Ultrabook with Windows 7 Home Premium installed. 64 bit. I start it, everything works fine, except that when I connect to my WiFi at home. I tried to connect, entered my password, but it does not connect. Also tried the easy connection on the router. No luck. I checked my old laptop which runs on Windows Vista to see if WiFi worked always, and this is where it gets interesting. I was able to browse the internet and internet worked, but suddenly Windows informed me that "another computer uses the same IP address" and it stops my internet capabilities on my old laptop. I connected my cable ethernet on both computers, and it works for both computers when it is plugged. While that plugged, I discovered that I could create my own IP address, which I did on my old laptop and so far that seems to have solved the problem. However, my DESIRE is always not connecting to WiFi. Any advice?

  Hi ZachRhodes3,

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  5 steps: how to set up your network wireless home

  For reference:

  How can I troubleshoot network card?

  Wireless network card: frequently asked questions

• Equium A100-027: unable to connect to D - LINK 514 router via WiFi with Vista

  I HAVE PROBLEM WITH MY TOSHIBA EQUIUM A100-027 MOBILE TO CONNECT THE ROUTER D-LINK 514. I HAVE WINDOWS VISTA ON MY LAPOP.

  I can't get the laptop to connect to my network using its internal wireless card. He's going to detect it but when I click on connect I am presented with "Windows cannot connect to the network.

  SOMEONE CAN ME SAY THE SOLUTION TO THIS PROBLEM.
  Thank you

  Hello

  I put t think it is a hardware problem and therefore, you should check your access point and the configuration of the WLan card.
  Did you use a WLan encryption, Mac address filtering?
  If so, disable encryption on the WLan router and try to connect to the network without additional security settings.

  If it will work and you can successfully connect to the WLan and then the problem was caused by incorrect security settings.

  Please check!

• 7 tablet (1800) does not connect to Wifi with WPA2

  I have a HP 7 1800 tablet, I had connected to my wifi at home using WEP security.  Everything worked well.  But I have a new laptop and need to change the WPA2 security.  Now, the Tablet does not connect.  I have all my other devices works fine.

  Why this 7 Tablet not connect using WPA2?

  I solved my problem.

  For some reason any the the mac address has been removed from the ACL when the change to the wire for WPA2 setting.  Does that happen ever, I looked there until today.