Assistance calculation of cell?

Similar Questions

• assistance calculation script

  Hi all

  Ive looked and tyed my self, but without success

  I need script to put a number based on a difrent box

  That is to say

  If box 1 number 10 or 11 box set must be 0

  If box 1 a number 12 or 13 out put should be 1

  If box 1 a number 14 or 15 out put must be 2

  and carries on like that

  any help would be great

  If the name of the first field is "zone 1", use this code as the calculation script custom of the second box:

  Box1 = this.getField("box_1").value;

  Event.Value = Math.floor ((box1-10)/2);

• XP on NB100 help please

  Hi I'm looking for some help in installing xp on a NB100, assisting pro if cela XP

  I tried one some time ago with no luck on a USB with xp sp3, but has never as much as installation, memory, according to me, it does still not recognize the hard drive, as its my daughters step pc I finally gave up and put ubuntu on which installed without problem.

  If someone has experienced this problem and if so what was the solution to workaround to fix.

  I have to completely reformat the hard drive? Usually when I put XP on a desktop pc I get the screens blue usual options to format and create partition etc, but this doesn t happen in this instance.

  I ve managed to borrow an external dvd drive and will try again tonight I just want to try to get some possible solutions ahead in case I encounter the same problem. Also I ve read somewhere that you need a driver sata or something, I will not be able to install XP without it? I must have this driver during installation and if yes, how do I get this on the netbook during installation

  A lot of questions that I'm sorry

  Hello

  I recommend to format the entire hard drive and try to install the operating system, then.

• Pavilion dv-6: what exactly should I here?

  HP Support Assistant analyzing my cell phone as being a '1254us dv-5", but the bottom sticker denotes" product: Pavilion dv-6 "and" model #: dv-6 1254us "."»  (Serial numbers and product numbers do not match).  There seems to be absolutely no information on this forum and elsewhere on the sticker model number.  I have a kind of mongrel here?

  I want to be absolutely sure , because I plan to download a BIOS upgrade to obtain the Calibration routine to the "f2" battery, which is absent on the current BIOS (Hewlett - Packard F.21 08-20-2009).

  Well Yes, it's finally another problem of calibrating the battery.

  Any advice will be much appreciated!

  Rodney

  You are the very welcome.

  The number of product that you saw in the BIOS will let you know what it is.

  Enter the number of the product in a search link below and it will tell you what you actually have.

  http://h22207.www2.HP.com/us-en

  It is possible that HP put a card mother dv5 dv6 chassis.

• Toshiba G450 contact name 7-digit limitation

  Hello

  I try to add a contact to my address book of Toshiba G450 and I was informed that there is a limitation in the person. It may be only maximum 7 characters.
  The two contacts of the sim or contacts of the device.

  The same restriction during playback of a contact of the apparatus with WellPhone XT 3.7.671.33 app: it shows only the first 7 characters.

  Can someone help me with this problem?

  Thank you.

  Sorry mate.
  This is a user in the Toshiba laptop forum
  I doubt that there are all the users who could provide assistance to the cell phone.

  However, good luck, perhaps some people might help you

• Snapshot Consolidation with a low disk space options

  After you delete all snapshots for a specific virtual machine, I am alerted that drives require codification, probably because it has insufficient disk space to successfully delete the snapshots. Of course, consolidation fails because of lack of space. I wonder if there are tricks to be able to consolidate records when the data store does not have enough space. So far I came up with the following options, but some are not ideal, I am looking for other suggestions:

  -Increase the size of the data store: not ideal because the data store will have more than enough space once the snapshots are deleted and it is difficult to decrease after the fact.

  -Storage vmotion the disks in another larger data temporarily store: a little better but not ideal due to the large amount of data

  -Stop the virtual machine and try to consolidate: I read that additional disk space is needed to consolidate the disk while the VM is running. If this is the case, how can I be sure that it works, for example to calculate the required space before I incur the failure (see below for more information).

  For each of these options, I am also looking for assistance calculating the space needed to consolidate properly, given the following information (let me know if further info is needed):

  

  

  According to the information provided, it seems that you use thin configured virtual disks. In this case the additional disk space required to consolidate snapshots could be anything up to the size/amount of snapshots, limited by the provisions of the virtual disk size less the current size of the hard file. If you consolidate snapshots, while the virtual machine is up and running, with the disk space required on the data store based on the changes made in the guest OS, while the Helper-Snapshot is active. Unfortunately, there is no available for this formula.

  André

• Cell calculation is a bit slower

  Hi, I use Acrobat XI Standard to create a form.

  Name of the cell	Cell value
  A1	1
  A2	2
  A3	3
  A4	= A1 + A2 + A3

  For example, if I put 1 in cell A1 and A2 2 and 3 in A3, I want A4 to calculate A1 + A2 + A3 = 1 + 2 + 3 = 6. My problem is, when I put 1 in cell A1, A4 poster 0, when I then put 2 cell A2, A4 shows 1. Then I put 3 in A3, A4 shows 3 which is the sum of 1 + 2 (A1 + A2). The calculation seems to be a bit slower than my entry. So when I complete the entry, A4 shows 3 which should be 6. If I want to make it correct, I need to do another action, like putting 0 into another cell so A4 would calculate A1 + A2 + A3 instead of just A1 + A2.

  It happens to many columns and other columns are fine, I checked the settings and properties in both cells and they are the same, so I don't know how to do.

  My laptop is windows version 1511 10 pro, the CPU is Intel Core i7-5500U CPU @ 2.40 GHz 2.40 GHz. type system is 64-bit, x 64 processor operating system.

  Please let me know how to solve this problem. Thank you.

  This is a typical symptom of a wrong field calculation order. Then in the form of edit mode, select:

  Tasks > other tasks > set field calculation order

  and organize the fields in the logical order.

• Calculation of digital cells

  Hello

  I created a table in a dynamic form where the user can add or delete lines as necessary. In the last line that is fixed, I want cells auto calculate the numbers entered into the cells above. Can this be achieved in LiveCycle Designer?

  Thanks in advance

  Lee

  Hello

  There is no problem with a little calculation script in FormCalc.

  Assumed your repeatable line is named 'Row' and contains a field named "Amount", the script will look like:

  $ = Sum(Row[*].Amount)
  

• Named question to create a calculation to add cells to the table three for a total

  I need help to create a calculation to add three tables.  Table, 6, 7 and 8.  The total of all tables must be in the last table where it says altogether.

  I'd appreciate any help.

  Thank you

  If the resultyou find attached will help.

  

  Steve

  Please post questions for LiveCycle Designer ES in this forum in the future.

• Configure a load cell connected to multifunction DAQ

  I'm trying to connect a LCDH Omega 10 K scale by a module of constraint Dataforth SCM5B38-37 then AI0 gauge on a USB-6251 multifunction data acquisition.

  In addition to the load cell, the application will use a pressure sensor with a strain gauge bridge module plugged into AI1 to read the pressure of hydrulic.  The pressure transducer using a measure of the force will be calculated and compared with the reading of load cell.

  Currently, the USB-6251 box is configured to read analog voltage on AI0.  The scale is then performed using linear Fit.VI.

  Review the example Bridge - entry continues shows some additional controls may increase the accuracy of the reading.

  Unfortunately trying to use the DAQ Assistant only added to my confusion of the best practice in the acquisition of a signal from a load cell.

  __________________________________________________________

  Here are some of the questions I have...

  What is the best practice implement a load cell using a full bridge strain gauge conditioning module labview?

  What is shunt calibration?  Is this similar to the USB-9237 DAQ modules-specific?

  How do you know if your sensor is set up like a full bridge, half bridge, etc, the document load cell does not it?

  You can use the VI delete DAQmx perform bridge?

  _________________________________________________________________

  I don't know, I understand all the information of the map calibration either.

  Why is there resistance to entry and exit values?

  What is the value of the zero balance signafiance?

  Specifications of load cell

  Lbs mV/V             

  0.000 0

  2000 0.598

  4000 1,201

  6000 1,804

  8000 2,404

  10000 3.002

  Excitement: 10 VDC

  Input resistance: 350,41 Ohms

  Output resistance: 352,08 Ohms

  Balance zero: 0.01 mV/V

  Hello!

  I was looking into your question and found a few links that might help you configure your system. The first is a white paper that discusses some of the basic concepts of the gauges of constraint and their use with LabVIEW, shunt calibration and also covers some of the resistance values you see:

  http://www.NI.com/white-paper/3642/en/

  As you can see in this article, we have some specific hardware, built for the kind of measures you take. Because these devices are manufactured specifically for this application, they would provide better and more reliable results. That being said, you can configure your system with your USB-6521, it might not be as accurate as one of these systems. To set up your measurement system, rather than defining the analog input as a measure of deformation, you want to use the voltage custom with the option of excitement. This article treats this yet:

  http://digital.NI.com/public.nsf/allkb/C66F92BDE229F45A86257B6D004D6033

  We get you your data in the form of Volts/Volts (this document addresses more info on bridge probe scaling: http://zone.ni.com/reference/en-XX/help/370466W-01/measfunds/bridgescaling/), , but you should make sure you standardize this value to the excitement. Devices such as the NI 9237 provide the voltage and can take this known value in to account within the program, but you may need to do this manually for your application. Here is additional information on the NI 9237 and how it is configured to read information from strain gauge:

  http://digital.NI.com/public.nsf/allkb/892C84122A6501AE86257547007E5C53?OpenDocument

  Regarding the configuration of unit load and the information, you can try to contact the manufacturer for more information!

  Thank you!

• No data appears in the mother cell entity after consolidation

  Dear,
  
  After I run consolidation, no data appear in the mother cell entity although the status is OK.
  I use version 11.1.1.4 on win server 2003.
  
  Thank you

  A little more information would be useful if you are trying to determine why this situation occurred.

  (1) if the rules of Consolidation in the AppSettings = O, you must provide custom Sub consolidate rules written in the rules file.
  (2) each account has a parameter "IsConsolidated". Check if the accounts in question are absent from this indicator.
  (3) If you have customized consolidation rules, review them to see if they work or not.
  (4) it is always possible, that you have a situation where the data has been consolidated in fact, but you have turned off the Sub amounts calculated.

  More specific information, we could be of further assistance.

  -Chris

• Automate the cells of the filter to another table based on two columns

  Hello

  What I'm trying to do is: filter multiple cells to a new table. In this example, I want that all students (column 'lidnr', 'city', then the first 7 columns) with 1 teacher in the 'First' column to be copied into the table 'teacher 1'. The same goes for students per 1 teacher in the column "second". I know it can be done with the help of the filter and the copy paste, but I would like to know if this can be automated, because there are many more tables in my actual document.

  

  

  I've been using maybe to think the search formula but he can't give me more than one result, the result must be unique.

  Thank you very much for your help.

  Kind regards

  Kim

  Hi Kim,

  The usual way to do this is to add an index for each table for which column the data is to be copied.

  Here is an example of preliminary. Improvements after return from the light of day.

  

  Triangles of error on the last row of T1 are thanks to the formula out of data to search for. Easily fixed.

  Order of the names is different from your example, which is grouped by day numbers. Build lists in the desired order, rethinking the index calculations.

  Course index calculations use the formula below, entered in Table 1::L2 and thre to the rest of the blue full cells filled.

  L2: = IF (OR (RIGHT($H2,1) = RIGHT (L$ 1.1) RIGHT($J2,1) = RIGHT (L$ 1.1)), MAX(L$1:L1) + 1"," ")

  Data recovery on the Table T1 is well done by the following formula, entered in A2 and down and B2 and filled and down-filled.

  A2: = INDEX (array 1::A, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  B2: = INDEX (array 1::B, CORRESPONDENCE (LINE (−1, 1 Table): $L, 0))

  More tomorrow (actually, later today).

• Use of data cell after the upgrade to iOS 10.0.2 has increased dramatically

  Hello:

  I noticed a HUGE increase in mobile data usage by my phone (iPhone 6s) after the iOS to 10.0.2 update.    I had not changed anything since before the update.  A few days after my phone iOS update my more than double to 15 days prior to the cell data update!   I went under a GB to 2.2 GB for two days.  I am only allowed 2.5 GB of my company.   Assist of WiFi was interrupted. I am connected to a wifi most of the time, all day at the office and at home in the morning and in the evening.  I haven't changed my phone usage habits nor have I down loaded new applications.   I also did all the stuff reset once I downloaded the update as turning on and off, hold down home and appears on the sides until that little Apple.

  I looked in the cell parameters section and noticed a few things that consume more data:

  Facebook: I had disabled cell Facebook use.   However, there was a large amount of data used. I also, by habit, only check Facebook when I'm at a known wifi spot as the House or the office.   It was less than a MB before and near a GB of data in 2 days.

  YouTube: Idem, had turned off cell phones and only look at the House.

  Maps - never used but the use of data.

  e-mail-HUGE amount of data used.  Normal use for me. in the past, the amount of data has been a MB.  Now it's 65 MG in 2 days,

  Siri - I do not use Siri as in "Hey Siri" or by using voice commands.  I use it from time to time to the voice on texts.

  AccuWeather.  Even.

  It's just as much as the apps that I use, the rest is electronic mail and stuff systems.   I uninstalled nearly all applications except for the few that I need as my ticket train and planning aps and mail want to stop this.   I won't send any imessages anymore.

  Quite an experience of something like that?

  Yes! I have iPhone 6 - after that the update almost all my data is gone for the month! I do not have Wifi Assist on and I only use data when I'm home and can connect to Wifi!

  I see my iPhone to connect to my Wifi then bounce to the cellular network. I have no problem with my home wifi network. This problem also occurs in the work. In addition, the network at work requires the password to the network - I type in iPhone tells me it's the wrong password, and then it connects. Then it disconnects after 2 minutes.

  I tried to reset the Wifi feature. Help!

• Numbers - how to import external data to a cell in a single file into a new cell in another file?

  Numbers - how to import external data to a cell in a single file into a new cell in another file?

  I want to do the same thing in numbers (3.6.2 (2577) I used to do in Excel (any version):)

  to import a calculation of a cell in a file in a new cell in another file.

  Example: I want to import the result of a sum in a specific cell of my accountant in August to a cell in comparison in my accounting of September.

  It was so easy in Excel. Until the reference computer broke down.

  By the numbers, I tried to copy - paste the contents of the cell formulated, but not good.

  No help manual online or anywhere. I think that maybe the function is absent in number.

  Then I return to MicroSoft Excel, that I have used for many years and I am sorry to say feel much more wysiwyg.

  Formulas in a numbers document cannot reference cells in other documents of numbers.

  "Much more wysiwyg" is another way to express what many of those who "used (MS Excel) for many years" expressed as "more intuitive. These two descriptions usually boil up to ' what I'm used to, ", which is also true in the other sense.

  Whatever the real explanation, the standard advice is "the tool that will do the job." If "the job" requires referencing values in a separate document, the numbers (alone and without the help of AppleScript) are not the best tool for this job.

  Kind regards

  Barry

• Identify a mobile cell

  Thanks for the reply before but here's my question again.  In the following, I want the calculation in column E to F2.  The calculation of column E changes every time an entry is created.  The total cumulative (E) column includes a calculation quite simple-C2 + D2 + E1.

  Date	Category	Flow	Credit			Running Total
  12/06/2013	Audit of		$10 000.00	$10 000.00
  	savings		$10 000.00	$20 000.00
  	Cash		$400.00	$20 400,00
  	Medical	$100.00	$0.00	$20 300.00
  	Food	$900.00		$19, 400.00
  	Expenditures	$600.00		$18 800,00
  	Gas	$100.00		$18 700,00
  	Utilities	$100.00		$600.00 18
  	Phone		$200.00	$18 800,00
  	TV	$10.00		$18 790.00
  	Gifts	$655,00		$135.00 18
  	Misc	$1 000,00		$135.00 17
  	Holiday	$5 000,00		$12, 135.00
  				$12, 135.00

  Like your previous post, the description of what you want to is not clear.  What it means

  "I want to spend the calculation in column E of F2"?

  Impossible to move the entire cell F2, so, don't you want the last entry in column E moved to F2?  When "last" means the entry in column E with the higher rank?

  Highlight the cell you think should go to F2 and explain why it is