Calculation of digital cells

Similar Questions

• Named question to create a calculation to add cells to the table three for a total

  I need help to create a calculation to add three tables.  Table, 6, 7 and 8.  The total of all tables must be in the last table where it says altogether.

  I'd appreciate any help.

  Thank you

  If the resultyou find attached will help.

  

  Steve

  Please post questions for LiveCycle Designer ES in this forum in the future.

• Custom cell format

  How to create a custom cell format in numbers that display 128598 as 129

  Hi Steen,

  The value of this cell will be used in addition to calculations, or is this is the last stop, and it's here as a Visual presentation only?

  How do you think the cell to display a number such as 3128598? 28598?

  If the value of this cell should not be used in the calculations more, the easiest way is probably to split the value of 1000, and round off the result to the nearest whole number. Here's and example:

  

  I assumed that the number is the result of a calculation in the cells in column a. cells in the reference column in column B to get the value, then reduce and around the reduction to get the result in column B. Although the formula requires the 'real' value in column A, it is not necessary for all who look at a table to see, so this column might be hidden, leaving the B column to display the result.

  B2: = ROUND (A/1000,0)

  The formula is filled down the column B for as many lines as necessary. Results with more than three digits can be displayed as line 3 or line 5 by checking or unchecking "thousands separator" in the cell format pane.

  If you want to avoid having a hidden column, replace A in the above formula with some formula generates the result in column A.

  Kind regards

  Barry

  You could ignore the hidden column by replacing the 'A' in the formula

• Numbers - how to import external data to a cell in a single file into a new cell in another file?

  Numbers - how to import external data to a cell in a single file into a new cell in another file?

  I want to do the same thing in numbers (3.6.2 (2577) I used to do in Excel (any version):)

  to import a calculation of a cell in a file in a new cell in another file.

  Example: I want to import the result of a sum in a specific cell of my accountant in August to a cell in comparison in my accounting of September.

  It was so easy in Excel. Until the reference computer broke down.

  By the numbers, I tried to copy - paste the contents of the cell formulated, but not good.

  No help manual online or anywhere. I think that maybe the function is absent in number.

  Then I return to MicroSoft Excel, that I have used for many years and I am sorry to say feel much more wysiwyg.

  Formulas in a numbers document cannot reference cells in other documents of numbers.

  "Much more wysiwyg" is another way to express what many of those who "used (MS Excel) for many years" expressed as "more intuitive. These two descriptions usually boil up to ' what I'm used to, ", which is also true in the other sense.

  Whatever the real explanation, the standard advice is "the tool that will do the job." If "the job" requires referencing values in a separate document, the numbers (alone and without the help of AppleScript) are not the best tool for this job.

  Kind regards

  Barry

• calculation using the formula node needs two clicks

  Hello

  I want to use this piece of code for a larger program. My goal is to take 10 values and calculate two values using a formula. I used the formula node as the calculation functions digital ordinary would be too heavy. If I click on save, it saves two values to a file.

  The problem that I am facing is that when I start the program, it works very well for the first time. The second time however, if I change the values, and then click on save, it still displays the previous values, or some altered values. I have to click on save twice to get the correct values. I don't understand the reason why this happens. Can anyone help?

  File attachment: Capture screen and VI.

  P.S. If the solution can help with the problem, I'm ready to change any part, but please, not irrelevant to suggestions on how to * improve my code *, because I've worked hard to make it work with another major project.

  I don't completely understand the description of your problem.  But I see two problems.

  1. the "Save" button actually belongs to the event that handles the record button.  And the case of the event should really be Jean-Claude Value Change of mouse down?

  2. your STOP at the bad mechanical action.  Since it happened so this just released, it is only true while you're pressing it.  It stops the upper loop, but can't stop low loop because your loop will also be waiting to save button to press.  Stop will always be false because you cannot press two buttons at the same time.

  Try to make your action to stop button to be changed when released.  You must return the button to false programmatically born of two loops.  In fact, it would be better to have a case of events for the stop button to stop the lower loop.

  I don't understand what you're trying to do in the upper loop.  You read a file as soon as possible, and it seems to be the same file that you create in the lower loop.  Why?

• Calculation in tiara

  Hello

  I am trying to automate the generation of reports using the VB script, I can do all the calculations in the Excel worksheet, but how I can put implement the same in the Vb script.

  I want to take an average of 2 cells in X channel and the channel sum output Y.   Y = X + (X-1) / 2

  then multiply the channel Y with 9.8 to give the output to channel Z.  Z = Y * 9.8

  I need to do all the calculations in all cells.

  also, I need ask a set of command in the specific channel with 100 and 0 as the departure and arrival in the channel.

  If any body knows that I can implement this in VB scripts, it would be a great help.

  Thank you

  Veer

  Hey Veer,

  It would not be acceptable to take the average of 3 adjacent cells?  If so, you can use the ANALYSIS feature "Smooth" in the palette "Curve Fitting" with a width of 1 smoothing.  Then, you can use the ANALYSIS function "Scale" in the "Basic mathematics" palette to multiply by 9.8.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Model

  I want a template for this idea below

  IF you have I'll really appreciated

  I want 2 sheets

  sheet 1. Data

  Columns

  1 name

  2 phone number

  3 times the meeting begins

  4 time of the end of the meeting

  total 5 minutes/hours the meeting

  6 type of meeting

  price 7 calculate the basis on the time and the type of meeting

  each line of a new meeting

  sheet 2. Invoice

  put in a phone number of a person and pull up information sheet 1,

  total number of hours the price total meeting

  Hi Abraham,.

  You want two Tables, placed on separate sheets. When you create two tables, I suggest to put them both on the same sheet. When working to your satisfaction, move the second table to a second sheet.

  You will need a unique identifier for each row in the data table. If more than one session is charged at a telephone number, the phone number cannot be used as a unique identifier. A possible identifier could be the phone number and a serial number indicating the number of sessions charged to this number so far.

  You will need a third table that lists each type of meeting and the hourly rate for this type of meeting.

  If you want to LOCK the table of calculation/billing against accidental changes, consider using a table of separate single cell to enter ID unique to the session being charged.

  Here is an example showing the calculations and the transfer of results to the invoice table.

  

  Notes:

  Data:

  Columns A, B, C, D and F contain captured data. I suggest formatting of column F (type) as a context menu to choose the type of meeting. This avoids the possibility of typos and ensures the necessary exact match between the entries here and in column A of the table of rate sheet.

  The full date and time value is indicated in columns C and D as a reminder that all cells with Dates, hours or both contain a date and time value complete specifying a single moment in time. If you enter only once, numbers affects the part of the date to the date on which the entry is made. If only one date is entered, numbers affects the time 00:00:00, midnight at the beginning of this date part. You can format these cells to display only some of the time, but be aware that each cell also includes the date on which the entry was created, and this part of the date is included in all calculations involving this cell.

  Column E calculates the length of the meeting by subtracting the start time of the end time. Subtraction (D - C) is encapsulated in a statement IF that removes the calculation until both the departure and arrival times have been entered.

  E2: = IF (OR (LEN (D)<><>

  Column G calculates the price of the meeting by using the meeting Type registered in column F, the rate of this type in the table of rate sheet and the duration of the meeting of the E column. As above, the calculation is contained in an IF statement, which removes the calculation that there is a value in the column length (E)

  G2: = IF (LEN (E)<1,"",DUR2HOURS(E)*VLOOKUP(F,Rate sheet="" ::="">

  Column G calculates a billing code based on the phone number and the number of his appearances in the data table.

  G2: = IF (LEN (E)<>

  Rate sheet

  Column A contains a list of the types of meeting. Items in this list must be an exact match with the data entered in the column Type of the data table.

  Column B contains the price per hour for each type of meeting.

  All cells in this table contains the data entered.

  Invoice:

  Billing codes are entered in column a. entered values must be an exact match to a value in column G of table data.

  Columns B, C, D, E and F contain variations of the same formula (listed below).

  The formula uses MATCH () - 1 to determine the data row that contains the data to be included in the invoice and the numbers entered individually to determine the column of data that contains every piece of data to be transferred.

  As above, the OFFSET function is wrapped in a statement IF to quell the calculations until there is an entry in the column A.

  B2: = IF (LEN (A)<1,"",OFFSET(Data ::="" $a$1,match($a,data="" ::="">

  C2: IS EQUAL TO IF (LEN (A)<1,"",OFFSET(Data ::="" $a$1,match($a,data="" ::="">

  D2: = IF (LEN (A)<1,"",OFFSET(Data ::="" $a$1,match($a,data="" ::="">

  E2: = IF (LEN (A)<1,"",OFFSET(Data ::="" $a$1,match($a,data="" ::="">

  F2: = IF (LEN (A)<1,"",OFFSET(Data ::="" $a$1,match($a,data="" ::="" $h,0)-1,6))="" ::="" $a$1,match($a,data="" ::="">

  As noted above, Bill can be moved on a slip separated after construction. Numbers of update formulas to account for the change in the location if necessary.

  Tables built in Numbers ' 09.

  Kind regards

  Barry

• / key apple returns + key numbers in the spreadsheet?

  Apple iMac running OS X El Capitan version 2:11:10

  Working in the worksheet Numbers, whenever I try to do a calculation in a cell using / key key registers a + sign instead? This means that I am unable to use a Numbers spreadsheet at all!

  Hope you can help.

  Hi Charles,

  In fact, if you look closely, you will see that the numbers are passed / signed Division: ÷, not a sign more +.

  You will find the formula works as it would have with the.

  Kind regards

  Barry

• New function to return 0 for negative design value

  How can I find the value 0 when calculating in the cell is zero or less than zero?

  calculation what ever is in the cell must be 'put' inside a max function like that.

  is that the calc is designated

  Then, you need to change:

  =

  TO

  = max (, 0)

  for example if the cell contains:

  = Sum(a2:B45)

  You must use:

  = max (sum(A2:B45), 0)

• Synthetesis of frequencies with filtered signals (Convolution)

  Hello

  I am a new user of DIAdem and I analysis of the signal.

  To deal with my purchases, I use several tools alreaydy implement in DIAdem. But I want to do a convolution of the signal number to make a spectrum of synthesis.

  In fact, I want to filter several frequencies on a signal and put them in a same spectrum, think a convolution of each of the signals.

  How can I do that with DIAdem?

  Best regards

  Pascal GRAIGNIC

  Hi Pascal,.

  I'm no expert in acoustic analysis, but it seems to me that you could simply add together the resulting chains of each single frequency filter digital function of the results of the ANALYSES.  The result of the calculation of digital filter in tiara is a curve of time series that contains only the frequency components with a size proportional to the contribution of the relative amplitude of frequency of such component (s) to the curve of time series (complete) original.  There is a function of multichannel totaling in the palette of the ANALYSIS of "basic mathematics".

  Brad Turpin
  Tiara Product Support Engineer
  National Instruments

• How to read formatting excel worksheet as an array of strings

  I use the report tool to read an excel spreadsheet in an array of strings of LV.  It works fine except that it reads the precision of digital cells (~ 10 digits of precision).

  In my workbook I have displayed accuracy the value 2.  Is it possible to read the table such that it is displayed instead of the way it is stored internally?  (BTW, I understand how to do this)

  manually by parsing the string array and limit myself to the accuracy but would prefer to use excel itself to determine accuracy)

  sachsm,

  This should allow you to get the text from a cell or a range of cells.  Sort of do a "paste special" 'values '.

  

• How to reduce the number of significant digits after the decimal point, not only displays for example, 0.12345678 convert to 0.123 in all cells

  I imported a. Table TSV having 4000 rows and 20 columns in numbers, by changing its extension .tsv in .txt. Then, drag and drop in numbers.

  The actual values have too many significant digits to be useful and may be beyond the capacity of the numbers to calculate or to find 262.825892344384

  If there is a way to have the SS (4000 x 20) 'Numbers' to reduce the values currently stored in the entire document or a particular column or row

  262.825892344384 to 262.8259 I am not interested to the value, but the value actually stored and used for calculations.

  I have a table that uses the formula of round and takes as input the data that you have imported.  Then you can select the data in the round table, copy

  then paste the data in the original table by using the menu item "Edition > paste formula results.

  

  Ibn chart at right

  B2 = ROUND (Original Data::B2, 3)

  It's abbreviation dethrone select cell B2 and type (or copy and paste it here) the formula:

  = ROUND(Original Data::B2, 3)

  now select cell B2, copy

  Select the cells B2 to C2, dough

  A2 = Data::A2 Original

  Select cells A2 through C2, copy

  Select cells A2 through the last cell in column C, paste

  now select the data in the table 'Data rounded' copy

  Select the corresponding cells in the original table, select the menu item "Edition > paste formula results.

• Assistance calculation of cell?

  If you make a cell for the calculation and the maximum number I want illustrated is 5 and the answer is 7 is anyway to show that the maximum number in the cell, no matter how high the sum is?

  Discover the MIN() function.

  So you should have something like MIN(5,) =

  SG

• in the cell indicator digital table according to the color value

  Is it possible to change the color of text in individual cells of a digital display indicator depends on the value of the digital displayed in this cell.

  You can use the ListBox instead of indicators in table. You can change the ownership of each cell individually.

• Set cell value digital format excel

  Hello everyone!

  I work with cell Set value.vi to send data to a workbook of labview. The only thing I can't do is change the format cell´s. For example, I send '-0.00049997' and it appears as "- 5, 00E - 4". " My goal is to show "- 4.9997E - 4 ', but I'm not able to change the width of the number or the digits of precision. Is it possible to change the format of the cell?

  Thank you in advance.

  Kind regards.

  You just set the NumberFormat for the cell, that you write. The format of the extract may be not exactly what you want, just adjust accordingly.