Assistant compatibility programs does not work.

Similar Questions

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• Why CRYSTAL_REPORT program does not work with windows Vista? __

  Why CRYSTAL_REPORT program does not work with windows Vista?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Recovery disc Creator program does not work

  I bought a new Tecra, because I have Nero to burn discs, I removed Sonic my system and after that I recognized that recovery disc Creator program does not work!
  I reinstall Sonic using Toshiba Application install, but nothing has changed and said: my recovery disc Creator program. "shortcut is broken!
  I searched the Forum, but could not find any solution
  is there anywhere to download recovery disk creator program?

  Hello

  the link is still present? If so, right-click on the shortcut and tell what program or the name of the program is linked. Maybe we can find something to take home your recovery disk creator.

  You know, that sounds really weird that a program always disappears after reinstalling the burning program sonic. Maybe it s just a special option or something that needs to be enabled.

  Welcome them

• Add/Remove Programs does not work with some programs in XP

  Why add and remove program does NOT work on some programs. These are programs on a computer that was created using a process of the image. Like ghost?

  If you have a third party app that will not uninstall, I think I might check the support page for this application and see what they have to say about it.

  Some AV products have obtained quite complicated that add/remove programs is not the recommended way to remove them, so some companies have developed their own removal procedures and some have special programs to manage their affairs.

  Norton/Symantec has a special page for you:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080416133836EN

  I see that just goes through Add/Remove programs too, but there is an option "what happens if it does not work" too (or post in the forums).

• My MSN mail program does not work

  My MSN mail program does not work. I had the computer at a Staples office supply store to get a verified cd drive. They said they were doing free computer cleaning. I said yes. When it was finished, I took the computer home and Premium MSN mail program would not be executed. Error messages say files are missing. I downloaded a file and then another message poped saying another file was missing. I got at Staples and I don't think they know how to fix it. I guess that the program needs to be reinstalled. My concern is that there are folders with important emails in them. They are erased if I re-install the program? Where should I go to re - install.

  Hi fla_bill,

  The question you have posted is related to MSN and would be better suited in the MSN support center.

  Please visit the link below to find a community that will provide the support ask you:https://support.msn.com/Default.aspx?&st=1&wfxredirect=1

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

  Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

  Hello

  What type of material is actually causing the problem? Is there more information the Fix It center offers you?
  I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
  http://support.Microsoft.com/kb/947821
  I hope this helps.

• saying vprotect popup program does not work

  popup vprotect

  I am (and have for years) running windows Vista.

  for the last two weeks, I've been making a Microsoft upward (supposidly), saying vprotect program does not work.   It is, to my knowledge, not something that I have loaded.

  I have to cancel the pop up all the time--seems to pop up when you access an electronic internet/e-mail connection.

  I tried looking for this "program", so I can delete or reload... but can not find or get the search results negative for vprotect!

  Any ideas?

  I use the paid version of AVG - 7 have been for about two years.

  Thanks for all the ideas.

  See:

  http://forums.Avg.com/us-en/AVG-forums?sec=thread&Act=show&ID=185255

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/vprotect-application-has-stopped-working-i-get/e69957d2-0D03-448f-af37-1c0179b4e3f8?tab=MoreHelp

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/vprotect-application-has-stopped-working-i-get/6ac76bab-6cbf-48E6-8392-21b6bedc97f7

• My antivirus programs does not work on Windows 7 64 x?

  I tried to install AntiVir, Avast, AVG and none work, before they did a month ago simply are prestalida I reinstall several times and tried several versions, so I guess that's the problem with Windows is the problem and that she would like to know, so that I can protect my computer, Windows Defender works but regular antivirus program does not work.
  as the blocked windows anitvirus programs?

  If you have a problem with AntiVir, then you should check the FAQ of AntiVir.
  If you have a problem with Avast, then you should check the FAQ of Avast.

  If you have a problem with AVG, then you should check the AVG FAQ.

  If you have a problem with Microsoft Security Essentials, then this forum is a good place to ask your question: http://answers.microsoft.com/en-us/windows/forum/windows_7-system

  In all cases, it is essential that report you what is happening. Say "none will work" is does not give enough information to draw conclusions of respondents.

• back program does not work under XP

  When I try to open this accounting program, the command window opens and a text flashes on the screen, then it goes to a blinking cursor.  This program works very well under Windows 2000.  Is there a way to make it work in XP SP3?

  When I try to open this accounting program, the command window opens and a text flashes on the screen, then it goes to a blinking cursor.  This program works very well under Windows 2000.  Is there a way to make it work in XP SP3?

  Unlike earlier versions of Windows, Windows XP does not rest on the BACK, and as a result, Windows XP does not have a program to do many things that would allow BACK.

  On the other hand, is Windows 2000, such as Windows XP, based on Microsoft's NT operating system, and in general, a program that runs on Windows 2000 must run under XP.  You can compare, for example,
  Troubleshooting in Windows XP MS-DOS-based programs

  with

  Troubleshooting MS-DOS-Based in Windows programs (that applies to Windows 2000)

  and you will see that the documents are virtually identical.

  If the suggestions of "Troubleshooting" in the article XP don't help not (in fact, before judge you), see if you can get your old application work using the Compatibility Mode of Windows XP program.  If the configuration in Windows 2000 does not work, try Windows 95.

• Vista laptop - programs does not work

  So, I was recently lucky enough to meet your typical Vista Security 2011 virus on my Dell laptop.  We met in the past I would be redemarrer to restart in safe mode, run the malware and generally she finds and remove it.  Well, this time I do the same thing as in the past, he finds it, but currently no program will run in normal mode.  I can get into safe mode, start the .exe files and others, but not in normal mode.  I combed the advice and tried several options that include:

  * Various /scans, Malware, AVG, etc.
  * Regedit, replacement of the exe, exefile, ' 1%"...and so on.
  * Find a vista_fix.exe file and I tried to use it last night, he merged, said to reset the computer, but nothing has changed
  * Microsoft Fixit (only runs in normal mode, but does not work... can not run it, he never completed create a control point)

  I can see pretty good most of these responses when searching on different boards, but none of them does not seem to work.  Just to get into the detail here, I don't receive any message when I try to run a program, nothing happens and it crashes windows Explorer.  Also, if I'm in normal mode and try to run something like cmd, regedit, msconfig, it crashes the window start and I can't use it anymore.

  I tried to go to the restore points, but nothing doesn't count, as does nothing when I try to run a file.  Oh and the internet works, so I can use it.  I also usually able to use malware, but he found nothing more.  I really am out of town on a laptop now, so I can't play with it atm, but I would love any assistance people can provide to combat this virus.  I'll get an external hard drive to back up all our photos, music, files once I get back and will just wipe soon if nothing works.

  Thanks in advance.

  Date of arrival:

  Remove Vista Antimalware 2011 and Win 7 Antispyware 2011 rogue changing name (uninstall Guide)
  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

  Remove Vista Security 2011. Description and removal instructions
  http://www.2-spyware.com/remove-Vista-security-2011.html

  My best advice would be to format and clean install of Windows Vista.

• HP Color LaserJet CP2025n Prin: I need to download the older driver because a program does not work with the new driver

  Where can I find the olderdriver that I can use windows 64 bits 10,

  because a program does not with the new driver.

  The year may be 2014 or almost.

  Your Timo

  @tisalmet

  Thanks for the reply with the details,

  You can activate the Device Manager to view hidden devices by following the steps mentioned below:

  To work around this behavior and display devices when you click Show hidden devices:

  1. Click Start, point to programs, point to Accessories, and then click command prompt.
  2. At a command prompt, type the following command and press ENTER:

     Set devmgr_show_nonpresent_devices = 1

  3. Type the following command a command prompt and press ENTER:

     Start devmgmt.msc

  4. Troubleshoot the devices and drivers in Device Manager.

  For more details: click here

  Uninstall all software and drivers for printers:

  When you need to uninstall a driver completely, the best and safest method is to use the uninstaller of the device (if it has one). If you have added the device to your system with a Setup program (as is the case with most of the graphics card and sound card drivers, for example), you can uninstall it as you would any other program.

  1. Click Start, type uninstall program, and then press enter.
  2. In the uninstall window, which appears, scroll through the list and find your device or drivers. Double-click the entry to start the uninstall process.

  Sometimes devices will not have an uninstall program or the uninstall program will not appear in the list. In these cases, you can use Device Manager to remove the driver completely.

  1. Click Start, type Device Managerand press enter.
  2. Find and double click on the category of the device you want to uninstall (for example, the graphic card would be listed under display card) driver.
  3. Right click on the device, and then click Uninstall.
  4. Windows prompts you to confirm the removal of the device. Click OK to remove the driver.
  5. Once the uninstall is complete, restart your computer as soon as possible.

  Once the above steps are done, click here to download the full software features for your printer and follow the Setup process to start to use your printer again.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Pay attention to the catalyst control center monitoring program does not work

  computer keeps displays the warning that monitoring program, catalyst Control Center does not work - what is it

  Hello

  ·         Did you make any changes before the show?

  ·         What operating system is installed on the computer?

  I suggest that you download and install the Catalyst Control Center from the AMD website and check if it helps.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• natural reading program does not work

  I bought this program, which once installed first gave errors in the administrator during the installation of a voice, he accepts no key code and fails to run, I guess it's to do with my system and not the program itself, but after a change of Director, under administrator uninstall, and reinstall the problem remains. Any ideas anyone.  (Win 7). Thank you.

  Hello

  I spent a week trying to fix the program, but nothing helps, the software company suggested to restore the file of documents on 'default' to solve the problem. It does not work.

  I have now re-installed the program again, and when I get to install the voice, I get error 1406, related to permissions.  The end result is the same, the key guard code reappear empty after I enter the code and try to run the program.  This suggests that the problem is due to my set up. Thank you very much.

  BGW

• Orbit Downloader program does not work with error "Socket 10061 error".

  Original title: socket error 10061 Orbit Downloader

  I use Orbit Downloader 4.1.1.2 to download files. It worked fine on my system. I have install/uninstall some software (as Commander of the registry and a software tweak system). But now, Orbit Downloader does not work. Below here are the logs when it tries to download the www.google.co.in homepage.

  Connection failed! Socket error = 10061
  Connection www.google.co.in:80
  Waiting for retry (5s)
  I try to run the orbit after you turn off the firewall and antivirus too, but it doesn't work. I use Windows 7 Home Premium. Please guide me to debug this problem.
  Hello
   
  1 are you facing the question only download this program, or with other programs?
  2 are you faced with the issue in the different browser? For example: Google Chrome, Firefox, etc.
  3. have you checked with the manufacturer of the program?
   
  Try the methods and check after each method.
  Method 1: Run Internet Explorer Performance convenience store.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Internet-Explorer-performance-Troubleshooter
  Note: the information provided in the above article are also applicable to Internet Explorer9.
   
  Method 2: Try the methods provided for in article below and check after each method:
  How to optimize Internet Explorer: http://support.microsoft.com/kb/936213/no
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
  Method 3: If you use the Internet Explorer browser, uninstall and reinstall Orbit Downloader 4.1.1.2, if it is a program.
   
  http://support.Microsoft.com/mats/program_install_and_uninstall/
   
  If the problem persists, I suggest you please contact the manufacturer of the program for extra support.
  
  http://www.Orbitdownloader.com
   
  Reference link:
  Windows Sockets error codes: http://msdn.microsoft.com/en-us/library/windows/desktop/ms740668(v=vs.85).aspx
   
  It will be useful.