ASUS Mx Suite program error could not be started

Similar Questions

• Unable to launch programs error: could not open rtl120.bpl file is not found, try to reinstall the program

  Original title: difficulties to open programs

  I keep trying to open different programs but get a message that says "could not open rtl120.bpl file is not found, try reinstalling the program.»  My problem is that some of these programs came with my package on the computer and if I uninstall it then I have to pay to re install a new program.  How can I solve this problem?

  Hi JenniferAS,

  1. is the issue limited with a particular program?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  It is a file associated with a program called Tune Up Utilities 2010.

  Tune up Utilities is a suite of utility software for Microsoft Windows designed to help manage, maintain, optimize, configure and troubleshoot a computer system.

  Method 1: Uninstall and reinstall Tune - Up Utilities 2010 and see if that helps.

  Step 1: Uninstall tune-up Utilities 2010.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Step 2: Re-install tune-up Utilities 2010.

  Download tune-up from here:

  http://download.tune-up.com/TUU2010/TU2010TrialEN-GB.exe

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• In CS2 program error: "could not use the text because of a program error."

  Yesterday when using the text tool, I kept getting the message "Could not use the text tool because of a program error". Today I still get this message and the same message when I try to change the size of the image. There is no information on what the program error is - all advice?

  This can be caused by a corrupt police.

  If you are on a Mac, FontBook open, select all (Cmd + A) fonts, file > validate font. Check fonts corrupted / invalid according to the results. Delete all corrupt fonts. Try using the text tool now.

  If you are under Windows, use this: http://fix-fonts-folder.en.softonic.com/ or search for one of the many programs on Google font manager.

  -ST

• Color picker error: "could not complete your request because the program error.

  IM using CC2015 on an iMac El Capitan. I get the error "Could not complete your request because of the error of the program" what colors for dropper or picking tool.

  Thanks for responding, I have the latest version on a new iMac. I am

  convinced that it is a software bug. I solved the problem by erasing all

  My predefined tools. Adobe needs to solve this problem, he has apparently been

  around since at least 2003.

  Wednesday, December 2, 2015, Akash Sharma [email protected]>

• First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

  Hi all

  I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

  When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

  After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

  The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

  Technical specifications

  First Pro CC 2015.4 (latest version)

  OS: Windows 10 Pro (Version 1511)

  CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

  RAM: 16 GB

  GPU: EVGA GTX 1070 (latest drivers)

  SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

  Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

  Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

  Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

  Type: MPEG Movie (.mp4)

  Image size: 3840 x 2160

  Frame rate: 29.97

  Format of the pixels: 1.0

  It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

  Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

  Any help?

  It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

  For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

  The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

• I can't reinstall firefox, I get the error 'Could not load profile' and not a solution I found works. / Appdata/roaming/mozilla folder is not accessible.

  I'm on Win7 64 bit. Initially, I uninstalled because a program has changed my page of the new tab to something unwanted and I literally had no way to change this back. Now, every time I reinstall, I get the error "cannot load the profile, it may be missing or unreachable", and I can't create a new profile. Whenever I try to any method of opening the profile editor, I get the error 'Could not load profile' then too. I can't access the folder in/appdata/roaming/mozilla at all. It is said it is accessable and access is denied, and tries to remove it tells me I have not permission (even if I'm the admin). No other difficulty I saw worked. Can someone help, please?

  I have done a virus scan, cleaned up one piece of adware, rebooted, and it worked all of a sudden. I don't know what exactly caused to start working, but he did, so I consider this issue closed.

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Java with Minecraft error "error: could not create the Virtual Machine Java.»

  When I try to open Minecraft SP, it won't let me open and there is a message saying:

  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  How can I solve this problem?

  Hello

  What is the operating system installed on your computer?
   
  You can ask your question on the Minecraft forums for assistance. Check out the following link.
  http://www.minecraftforum.NET/viewforum.php?f=1002

• Error, "could not stop main service of McAfee Amti-malware on the Local computer. Error 5: access is denied. "when trying to stop the McShield service.

  Original title: mcshield is a nightmare for me.

  McShield is a nightmare for me.  Its location is c:\program files\common files\mcafee\ACore\mcshield.

  When I try to stop it in services.msc I get the error "could not stop McAfee Amti-Malware Core service on Local computer.  Error 5: access is denied. »

  I have administrative rights at sign on. How to stop this monster?

  http://www.pchell.com/virus/uninstallmcafee.shtml

  read this through

  If it was me I would uninstall McAfee, it is not highly recommended by someone I know.

  Once it is removed, try a free antivirus, I use MSE, but you have to read the instructions first!

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Download MSE

  http://experts.Windows.com/w/experts_wiki/89.aspx

  MSE installation checklist

  If you choose to use Mcafee, download autoruns, which shows which takes over at the start and you can disable here.

  AUTORUNS

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  Above is autoruns to loadup questions

  If you still can't find the entry in the registry, download Autoruns.  Let it finish the scanning, then click the Services tab.  Find the name of the service 'wrong' in the left column ("Autorun entry").  Right click and select ' go to '.  You will go straight to the appropriate entry in the registry for editing.

  I would like to examine what you load at startup. You should see if you have any programs from loading during the startup process, which can be changed on request.
  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

  When you use Autoruns, you will need to click on the "Connection" tab to see what runs at startup.

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt

  What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt.

  I always get this message in a long horizontal area on my desk top once I restart and turn on my computer.

  Thank you

  "Privoxy" is a 3rd party is no program not part of Windows XP.  You can go to
  Panel-> Add/Remove programs
  and remove this program.  If you still think that you need this program, try reinstalling it on Sourceforge
     <>http://sourceforge.NET/projects/ijbswa >

  HTH,
  JW

• Problem of uninstalling with the error 'could not access VBScript Runtime for custom action'

  I'm having a problem uninstall a program. I'm getting repeatedly blocked in error: "could not access VBScript Runtime for custom action.  That means this error in uninstall a program? Would appreciate a fix for this. The program is called Soluto.  Thank you.

  P.S. I tried as admin and type regsvr32 vbscript.dll then regsvr32 jscript.dll in the command prompt.

  As well as their registration as an administrator, you may need to remove the entries for them in HKEY_CURRENT_USER.

  See:

  http://blogs.msdn.com/b/astebner/archive/2007/06/07/3151752.aspx

  Also, make sure that your antivirus software is not blocking scripts.

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Error: could not open the file splittet files

  Try installing Adobe Digital Edition and get the error "Could not open file for splittet files."  Have removed and installed all the adobe reader and flash programs very well, but can not get it to install.  Ideas?

  Hello

  I suggest you contact Support Adobe as the error seems to be related to this product.

  http://www.Adobe.com/support/

  You can also post your query on the Adobe forums for assistance.
  http://forums.Adobe.com/index.jspa

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902