asynceventlistener in the tables with the IDENTITY of ACEs ALWAYS GENERATED and GENERATED BY DEFAULT AS IDENTITY

Similar Questions

• How to INSERT a SELECT statement with a GROUP BY clause on a table with an IDENTITY column?

  n an application, I intend to truncate and insertion on a 12 c Oracle database, but have found this problem with a IDENTITY column. Even if the INSERT... SELECT statement works on most SELECT uses I tried, if this statement was also a GROUP BY clause, it does not work, delivering a "ORA-00979: not a GROUP BY expression ' complaint. Some examples of code:

  create table aux ( owner_name varchar2(20), pet varchar2(20) );  
  insert into aux values ('Scott', 'dog'); 
  insert into aux values ('Mike', 'dog'); 
  insert into aux values ('Mike', 'cat'); 
  insert into aux values ('John', 'turtle');  
  
  
  create table T1 (
    id number generated always as identity,
    owner_name varchar2(20),
    pet_count number ); 
  select owner_name, count(*) as pet_count from aux group by owner_name; -- works just fine
  insert into T1 (owner_name, pet_count) select owner_name, count(*) as pet_count from aux group by owner_name; -- doesn't work
  

  The select statement works by itself, but it fails as an INSERT... SELECT statement.

  Appreciate the help!

  Looks like a bug. You must open the SR with Oracle. Meanwhile, you could materialize select:

  SQL > insert into T1 (owner_name, pet_count)
  2 with t as (select / * + materialize * / owner_name, count (*) as pet_count to the owner_name group)
  3. Select owner_name, pet_count t
  4.

  3 lines were created.

  SQL > select * from t1;

  ID OWNER_NAME PET_COUNT
  ---------- -------------------- ----------
  1 John                          1
  Scott 2 1
  3 Mike                          2

  SQL >

  Keep in mind index THAT MATERIALIZE is undocumented.

  SY.

• Why not any video I watch just play all the time? they always stop and then start.

  When I watch they always stop, then start the video, and navigation appears on some things that I watch or and icon of this kind.  Why would he do that?  I didn't yet this thing 2 weeks yet.  What could I do for her already?

  Hello

  Try the following.

  First, download the Flash uninstall utility on the link below and save it to your desktop.

  Flash Player Uninstaller.

  Once the download is complete, close all browser windows and start the program uninstaller.  Once done, restart the laptop.

  Then, download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before download. 

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the video play Ok in this browser - if they do, close Firefox, open Internet Explorer and click on the same link Adobe Flash above to get a command prompt to install the ActiveX component.  Once completed, restart Internet Explorer.

  If you still get the problem of loading, run a check of the speed of your internet connection by using a site like the one on the link below, where it is causing the problem.

  http://Speedtest.NET/

  Kind regards

  DP - K

• The video streaming HD always jerky and stops a lot on xbox 360 with new e3000

  I just got a new e3000 and when I stream HD videos on my xbox 360 its very restless and jerky unbearable to watch...

  I changed the mtu to 1400 and he did a lil better... I moved my router as close as I could for xbox360 and it got better, but still very agitated

  I have one of the new xbox 360 s so its N Wireless, even if I found hard path is not compatible with 5 GHz

  What else can I do to make my videos HD stream flawlessly? all other settings can I change?

  Thanks in advance

  Change the size of the MTU to 1365. Save the settings and the cycle of power to the router. See if that makes a difference.

  You can also try to change some advanced on the router settings wireless.

  Click on the Wireless tab and go wireless advanced settings. Change the tag to 75 interval, RTS threshold to 2307 and 2306 fragmentation threshold. Save the settings.

  Go to the Security tab and uncheck "filter anonymous Internet requests". Save the settings.

  Click the Administration tab and disable UPnP.

• After using the converter DNG, Lightroom always recognize and import my photos...

  I just started shooting with a Sony A6000 and could not import the photos because of compatibility issues with my current version of lightroom (4.4).  After having read about it on the forums I found that I had to download LR5 or use the DNG Converter and then import into LR.  I opted for the difficulty of the problem free and downloaded (compatible with Sony A6000) v8.4 DNG Converter.  Now, after you convert my photos freshly slaughtered in DNG, I tried to import them into Lightroom with the copy and move functions (because I like the Organization of the files I put in place by LR) but every time I find myself with a dialog box saying "Unable to move a file at the location requested."  In the import window, LR showed clearly previews of images. During the conversion to DNG, I assured photos are compatible with Camera RAW v7.1 and later (my LR a v7.4) and I tried the two built-in Fast Load Data and not... Also, I use a MacBook Pro OS X 10.9 if that makes a difference.  Am I missing something? I don't see what the problem is... All I want to do is to organize and edit my new pictures of my new camera on LR without having to pay an extra $80 for the new LR just because I have a new camera...

  This could be a permissions problem, especially if you use a Mac computer. Make sure that you have write permissions for the folder you are trying to import.

• create table as a table with nested column type

  On my Oracle DB (11.1), I have a table with a nested as a column type (and it is a partitioned table).
  Now I need to copy partitions in a second table, and I use swap partition for it (with a table that is not partitioned as a table in step).
  
  But there is a problem, because as the ordinary as sql ddl:

  create table table1_stage as select * from table1 where 1=2;

  does not work when there is a table nested within a column type.
  Is it possible easy to copy its structure (and to create the table that is not partitioned, so I suppose that no dbms_metadata package would help)?
  
  
  Kind regards...

  >
  does not work when there is a table nested within a column type.
  >

  Will work indeed.

  Read this

  SQL> CREATE TYPE typtst IS TABLE OF VARCHAR2 (100);
    2
    3  /
  
  Type created.
  
  SQL> CREATE TABLE test1
    2  (
    3     col1   VARCHAR2 (100),
    4     col2   typtst
    5  )
    6  NESTED TABLE col2
    7     STORE AS list1;
  
  Table created.
  
  SQL> CREATE TABLE test2
    2  NESTED TABLE col2
    3     STORE AS list2
    4  AS
    5     SELECT * FROM test1;
  
  Table created.
  
  SQL> 
  

  G.

• Indexing of a table with string instead of the number

  In TestStand, there are 2 ways of indexing of certain types of berries. (Seems to be arrays of containers)

  For example, in a sequence containing one step, called statement, you can contact this step in two ways:

  RunState.Sequence.Main [0]

  and

  RunState.Sequence.Main ["Statement"]

  (in fact, I can also use the id of the step, but keep, more simple with these 2 methods)

  Is there a way to create this type of table myself, in order for me to use string indexing? (or is it only possible on certain Types of OR)

  As can imagine you, this works for any array of containers.

  You just need to assign names to the elements. You can do this in the sequence by selecting an item and pressing F2, editor or by setting the PropertyObject.Name programmatically.

• kindly tell how to use the unique value of a table with the index 0

  kindly tell how to use the unique value of a table with the index 0

  Hi
  
   
  
  Yep, use Index Array as Gerd says. Also, using the context help ( + h) and looking through the array palette will help you get an understanding of what each VI does.
  
   
  
  This is fundamental LabVIEW stuff, perhaps you'd be better spending some time going through the basics.
  
   
  
  -CC
  

• 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

  Hello

  I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

  Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

  My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

  Thank you very much.

  My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.

• Fill the table with the formula nodewith a line of code

  Hello

  This is my first post of the community, OR maybe this question has been asked 1000 times but I could find no answer.

  Before using LabView I used Matlab a lot. I find a bit that it's too complicated without reason sometimes in labview work with arrays.

  I inherited, and I'm doing a little cleaning. what it does is extractr 2 and 3 position and creates a new table with her and another oner with other elements of the first table. In my view, that he becomes confused because you should rely on the cell of the table, the position of the output and I didn't wat to work this way.

  

  I replaced it with a knot of formula. Here is the code

  The departure is FP, the table of 6 elements is mdot and the 2 elements array is press

  MDOT float64 [6], press [2];

  MDOT [0] = FP [0]; MDOT [1] = FP [1];
  MDOT [2] = FP [4]; MDOT [3] = PS [5];
  MDOT [4] = PS [6]; MDOT [5] = FP [7];

  Press [0] = PS [2], press [1] = PS [3];

  Now, I want to know if it is possible to do as I would in matlab or C, where you can create a table with one line of code. What would the syntax in formula node to do something like:

  MDOT [6] = [FP [0], FP [1], [4] of FP, FP [5], FP [6], FP [7]];

  Press [2] = [FP [2], FP [3]];

  Thank you

  Use remove the table.  You can provide an index and length of elements to remove.  One of the outputs will be the original with the subset of the deleted table and the other output is the subset deleted.  1 NŒUD!

  EDIT: Created a snippet just after my previous post.

  

• Manipulation of the table with the recurrence

  I have a 2D chart which is similar to an adjacency matrix.  The table contains information that I need to analyze following a set of simple rules, but I'm unable to implement them.  Here is a simple example of the table (I would like to get the simple example job, and then expand as needed to work with the greatest examples).  The table is a table of 6 x 6 and the columns contain information about a procedure of transition between nodes in a map.  There is a root column (column we will begin by) and there are sheet columns, columns, we strive to achieve by browsing through other nodes in the graph (other columns in the table).  In the example below there is that a single root and a leaf, root is column zero and the leaf column 6 (I chose the marking of the nodes so that the zero column would be the root and column 6 would be the leaf but it doesn't have to be the case and I'm writing the software so that it is not dependent on the labelling of the map).  Outside the entrance to 2D table, there will be an array of column headers that maps the label of node to the right column of the table, a table of leaves and a digital control for the root.  That's what I try to do, refer to the image below.

  

  I look at the root and see that this is node 1, the column header looking I see that node 1 is column zero of my table.  I start with the line 0 in column 0 (the root column) and work my way down looking for integers not dummies.  I'm a rank, then see the integer 2, that tells me that I need to move the column 1 of the table (because the column 2 header) and store the integer 2.   I start with row 0 column and work my way down looking for integers not dummies.  I just rank 2 and see integer 3, that tells me that I have to move to column 2 of the table (column 2 header 3) and store the integer 3 (while I now [1,2,3] as my path I'll build).  I start at line 0 in column 2 and work my way down looking for integers no dummies and come in the 4th row is Integer 5, it tells me that I have to move to column 4 of the table (because the column 4 has 5 header) and store the integer while I [1,2,3,5] as my way.  I start at line 0 in column four and work my way down looking for an integer not null and come 5th see 6, because integer integer 6 is my current journal (only sheet for this example) I stop and have a path from node 1 to node 6 [1,2,3,5,6].  I didn't even though (and this is the part that gives me bad) because the column 1 (node 2 header) had another line nonzero, rank 3, which contains integer 4.  I need to repeat the process from here, give me a second track of [1,2,4,5,6].

  You can see how this will get very complex when I have several columns with several lines non-zero.  This seems to be a good case for use recursion, but I can't write the code to do this.  In the end, I need to find all the ways to get from the root to the leaf, as I said that there is more than one sheet in most of the cases.  Having many Leafs should not be a problem because I can repeat the same process for each leaf.  I have attaced a VI in 8.0 which has berries that I work with, according to the picture above.  I would like ideas on how to achieve this, as I refuse to do it by hand for great examples when I should be able to easily automate this process.

  Concerning

  This version fixes two problems I mentioned - one was caused by the queues the starting point outside the loop (a legacy of my original idea), the other to not deal with the final loop iteration when there is nothing in the queue (fixed with an additional business structure).  You need is a graph (that is to say, have links back and forward)?  Otherwise you could do a little more efficient with a directed graph, by removing the link from 2 to 1, 3 and 4 to 2, etc.

• Is the network address in the identity of A class society I have contract with?

  Is the network address in the identity of A class society I have contract with?

  Hi stuckfree,

  You want to check the following items for related information.

  Address classes

  Public and private addresses

• implementation of the table with the scroll bar. (data scrolling)

  Hello

  I want to show the web service data in the table with scroll bar using java script or html or css .actuall I want only a part of the screen is not whole screen scrollable. can you suggest how it is possible.any suggestion? I used phone gap technology. I used iscroll but it does not work in blackberry data are not displayed in the Simulator... Help, please

  Thank you

  ravi1989 wrote:

  Hello

  I want to show the web service data in the table with scroll bar using java script or html or css .actuall I want only a part of the screen is not whole screen scrollable. can you suggest how it is possible.any suggestion? I used phone gap technology. I used iscroll but it does not work in blackberry data are not displayed in the Simulator... Help, please

  According to devices/operating systems that you want to support, you could give bbUI.js a change. It works really well in most of the cases, and I think there are a lot of things you don't need to worry more because bbUI.js is just for you.

  Look more at the scrollPanel example that does exactly what it takes, a part only of the entire screen of scrolling you can configure a height in the HTML source code directly.

• Table with fixed header and the left column

  I created a table in my application with the fixed left column (left most column is fixed and remaining columns are scrolling from left to right). is it possible to create a table with fixed position and fixed left column?

  Suppose there are 50 rows and 10 columns in my paintings, and only 3 columns and 15 rows are visiable on the screen

  (1) when the user scroll left to right left only most of the columns must be fixed. Remaining cap of the table and column scroll left to right and vice versa. also

  (2) when user scroll high high bottems single topic most must be fixed and remaining all lines (with to the left most column) should be scrollable.

  I am able to put in place a point at the top, but not both. Please suggest

  "If I repopulate the value in the cell when user scrolling, shell, I get scrolling effect correctly as it only shows half cell when the user highlight half of the cell."

  Approach using TablelayoutManager display single cells and scrolling would be cell at a time.  And Yes, you will need to override navigationMovement and n of methods appropriate TouchEvent your TableLayoutManager so that he knows when to fill the cells.

  Another alternative is to have four managers, we don't the the upper left corner (the dead angle), one to make the top row (column headings), one to make the left column (row headings), and the other to do the rest (data).  Place all these in a delicate header and line manager.  Only allow the user to scroll the data part.  Have the difficult Manager to listen the scroll events.  Then have the wily Manager add and remove the dummy column and header line managers as appropriate.  Note that these topic fields would not good passes, they would be either there or they would not be displayed. That would give you your 1/2 a scroll of the cell.  And you wouldn't have to substitute anything to detect movement, you would have left the listener do scrolling for you.

• AF:table with Pagination. How to get to the specific page?

  Hi all!

  I use jDev 12.1.3

  I have the following case, based on the Employees of HR schema table.

  In a stubborn workflow, I have 2 pages.

  The 1^era page has a read-only table with the employees. The peculiarity is that the instance of the opinion of the employees is tuned with Page Ranging (lazy employees is a huge table).

  Af: table has autoHeightRows = "15" scrollPolicy = 'page' and the iterator has RangeSize = 15.

  By clicking on a button, the user goes to the second page, where the selected record should be changed (with the help of the SetCurrentRowWithKey method). Then, the user wants to go back to the first page.

  The question starts here.

  Assume that the user is on the page with the table and wants to change an employee who is on the page of the 3^rd (paging) of the table. After the change of registration, the user wants to return back to the page 'table', but not on the first page (of the paging), but 3^rd page.

  So, how I put the current page and the return line to the initial selection of the user?

  I ' tried scrollToRangePage() but nothing seems to happen.

  Thank you very much

  ~ Apostolos

  You can do it if you save the page the row is turned on, or the beginning of the beach page. Her edit you the line and after you have finished editing, you set the rear range.

  To set a table on a specific page, you use a RangeChangeEvent where you specify the table, oldstart, oldend, newstat index values and newend.

  Before you begin to modify or end edit, you can calculate the values of the iterator. Something like

  {} public void onGotoPage (ActionEvent actionEvent)

  BindingContainer bindingContainer is BindingContext.getCurrent () .getCurrentBindingsEntry ();.

  get the number of page to goto

  AttributeBinding attr = bindingContainer.getControlBinding("gotopage1") (AttributeBinding);

  Entire NewPage = (Integer) attr.getInputValue ();

  If (newPage == null) {}

  return;

  }

  first page starts at index 0 so subtract 1 from the number of page

  -newPage;

  DCIteratorBinding iter = bindingContainer.get("EmployeesView1Iterator") (DCIteratorBinding);

  calculate the old and new rage for the RangeChangeEvent

  range int = iter.getRangeSize (); Note both the table and we take the RangeSize of the iterator page size

  int oldStart = iter.getRangeStart ();

  int oldEnd = oldStart + Beach;

  Newstat int newPage = * rank;

  int newEnd = Newstat + range;

  Find the table

  UIViewRoot iViewRoot is FacesContext.getCurrentInstance () .getViewRoot ();.

  UIComponent table = iViewRoot.findComponent("t1");

  create the event and fire

  Event RangeChangeEvent = new RangeChangeEvent (table, oldStart, oldEnd, Newstat, newEnd);

  table. Broadcast (Event);

  Update table

  AdfFacesContext.getCurrentInstance () .addPartialTarget (table);

  }

  I've marked the essential parts "BOLD".

  Timo